What happens if the lenovo SSD data got erased?
Hi everyone
I'm a newbie when it comes to laptops. I recently purchased a lenovo ideapad u510. I'm haivng trouble making a recovery disk. I'm not sure how to do it and I'm afraid I'm not going to do the right thing. However, my brother was using my computer thinking he knew what he was doing and erased the data that is on the SSD. My question is if the stuff on the SSD going to effect anything such as making a recovery disk or if I ever need to recovery my laptop.
update:
I just realized that the lenovo partition was deleted is that bad?
Thanks in advance.
hi Jfranc,
Welcome to the Forums.
The recovery partition is used to restore the unit from the factory condition (this may come in handy if you get a virus or simply just want to restore from the original image). If this image is gone, you may still create a recovery drive using this method.
As for the SSD, it's usually used as a cache drive. See these guides on how it works and how to reconfigure it.
- The Guide on How To Reformat, Repartition AND Get RapidStart & RapidStorage Working
- Intel Smart Response Technology User Guide - UEFI
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!
Similar Messages
-
What happened to the Get/Set Date and Time utilities from RT 7.1?
I'd like to use the Get/Set Date and Time utilities that were available in 7.1, but disappeared after that. I see that the 7.1 utilites call a dll that does not appear to be installed with LabVIEW RT 8 and later. What do I need to do to use the utilites from 7.1 that do not appear in later versions?
In Labview 8.2 and later there are two directories for vi.lib. settime.dll is located in National instruments\Labview 8.2\Targets\NI\RT\ vi.lib
This is the dll you want to use in order to call it use the same Vi as in 7.1 (RT set date and time.vi) and link it to the correct dll. -
What happened to the ding when I got new mail?
How do I get a "sound" when I receive a new e-mail message? Up until today I would hear a ding but now it is not sounding.
Thanks. I read the doc, and basically the method I used to resolve the problem was based on that. Since the import dump will generate an archivelog, in my case more than 25G, How can I avoid the archiveloging during theb import dump, some kind of switch-off? Otherwise, how can I know how much archivelog will be generated by the process in order to change flash_recovery_area.
Message was edited by:
user508054 -
my iphone 5s got stolen and the option to erase data after 10 tries was not enabled. What happens after the incorrect password is input after 10 times?
After the sixth erroneous passcode entry a delay is imposed that increases exponentially and eventually reaches over 40 years before another attempt can be made.
No one yet knows how long the next delay is. -
Streaming radio just stopped working Firefox version 8, but I can get everything else not on stream to work. Add on's are up to date. I can't recall if it happened after the Firefox up date or after listening to last.fm or what prompted it. How to fix this?
I installed-enabled MS win media player firefox 1.0.0.8, i still did not get streaming, error box comes up and says 'stream load error', the 'windows media test' thing did not work, i tried iheart radio-no luck, so i disabled win media player plug-in dynamic link library 3.0.2629 and tested and still did not work, i also have plug ins: silverlight 5.0.61118.0 and quicktime 7.6.9 7.6.9.0 enabled. I don't know why all of the sudden i have a stream problem with firefox, yesterday, i tried on IE which i never use and had no problem with it. i will try to do more trouble shooting and see, its really frustrating, if can't figure out, i guess will have to revert back to IE which i really don't want to do, but---oh well. thx for help.
-
What happens when the computer get too full of e-mails? Will it automatically start deleting ... or give you some kind of warning?? I never delete personal mail right away since I might want to refer back to it, and then the first thing I know, I've got a big backlog.
It will not automatically delete any emails; you will need to do that. You may suffer performance issues in Mail if you let your mailboxes become too bloated. And, aside from Mail, the files take up a lot of room are photos, videos, and music, so you might want to watch those - every once in a while, check how much hard drive space you have and make sure you empty the trash regularly. Checking your hard drive space: highlight your Macintosh HD icon on the desktop; hit Command + I and check the total capacity, and how much is left.
-
What happened to the createPDF mobile app.
I can't find it in the app store anymore and links to it on the adobe website lead nowhere. Has this been discontinued? Any alternatives available?
Never got a response so I bought Office Suite Pro 6 from the Google Play store. It goes on sale every now and then. Picked it up for 99 cents. Has in-app converion of word to pdf (ie, not cloud based). Works fine and pretty good Office app too. Hope this helps.
Date: Fri, 4 Jan 2013 10:42:27 -0700
From: [email protected]
To: [email protected]
Subject: What happened to the createPDF mobile app.
Re: What happened to the createPDF mobile app.
created by ghettosamson in CreatePDF on iOS - View the full discussion
I have the same question. I was fixing to buy it but for some reason the App store says its not available in the US. Anyone else have a response?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4968193#4968193
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4968193#4968193
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4968193#4968193. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in CreatePDF on iOS by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Pipeline functions - what happens under the hood? (10g)
Hi all,
What happens when you call a pipelined function? (As opposed to a plain table-valued function.)
From what I understand, a pipelined function will return rows as they are needed. Let's say I have a really silly example of a pipelined function,
CREATE OR REPLACE PACKAGE BODY TEST_PACKAGE_1
AS
FUNCTION GET_DATA RETURN JUST_A_TABLE PIPELINED
IS
BEGIN
PIPE ROW (JUST_A_TYPE('HELLO'));
PIPE ROW (JUST_A_TYPE('WORLD'));
RETURN;
END;
END TEST_PACKAGE_1;
/Then let's say I were to SELECT * FROM TABLE(TEST_PACKAGE_1.GET_DATA) WHERE ROWNUM = 1, what happens to the second row? Does the code that returns the second row still get educated? (Obviously it's omitted from the query, but does it still get generated somewhere and just go nowhere?)
If I have a cursor on a PL/SQL block that selects from GET_DATA, will each row only be returned as the cursor references it? In that case, what happens to the rows that don't get selected? If there some resource that need to be closed out (say, just before the return statement), would it still be safe to close it out?
Thanks!
DonInteresting question, lets try a simple test and see we'll just take your example function and toss in a few dbms_output statements like so:
CREATE OR REPLACE PACKAGE BODY TEST_PACKAGE_1
AS
FUNCTION GET_DATA RETURN JUST_A_TABLE PIPELINED
IS
BEGIN
dbms_output.put_line('ONE');
PIPE ROW (JUST_A_TYPE('HELLO'));
dbms_output.put_line('TWO');
PIPE ROW (JUST_A_TYPE('WORLD'));
dbms_output.put_line('THREE');
RETURN;
END;
END TEST_PACKAGE_1;Now not forgetting to enable dbms_output call it three times like so:
SELECT * FROM TABLE(TEST_PACKAGE_1.GET_DATA) WHERE ROWNUM = 1;
SELECT * FROM TABLE(TEST_PACKAGE_1.GET_DATA) WHERE ROWNUM <= 2;
SELECT * FROM TABLE(TEST_PACKAGE_1.GET_DATA) WHERE ROWNUM <= 3;What I saw from my test was that with the first call I got 1 row of data from the pipelined function and only the first dbms_output statement was processed. For the second statement I got 2 rows of data from the function and the first two dbms_output statements were processed. For the final call I again got 2 rows of data from the function and all 3 dbms_output statements were processed.
My environment:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
"CORE 10.2.0.1.0 Production"
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production -
E4X: What happens to the root element?
I'm working with XML using the E4X notation. I'm used to the "old school" XML APIs that use DOM and I'm a bit confused.
For example, let's consider the following XML
<mx:XML id="myXML" >
<top>
<sub1 id="uno">
<sub2>hello</sub2>
<sub3>world</sub3>
</sub1>
<sub1 id="duo">
<sub2>ok</sub2>
<sub3>ko</sub3>
</sub1>
</top>
</mx:XML>
In my code I use the following traces. This is done with the De MonsterDebugger, but all others should work the same way. I have casted the traces to String only to make it easier to ask this question (no need post images)
MonsterDebugger.trace(this, "myXML:" + myXML);
MonsterDebugger.trace(this, "myXML.sub1: " + myXML.sub1);
MonsterDebugger.trace(this, "myXML.sub1.sub2: " + myXML.sub1.sub2);
What I get as output is
(String) = myXML:<top>
<sub1 id="uno">
<sub2>hello</sub2>
<sub3>world</sub3>
</sub1>
<sub1 id="duo">
<sub2>ok</sub2>
<sub3>ko</sub3>
</sub1>
</top>
(String) = myXML.sub1: <sub1 id="uno">
<sub2>hello</sub2>
<sub3>world</sub3>
</sub1>
<sub1 id="duo">
<sub2>ok</sub2>
<sub3>ko</sub3>
</sub1>
(String) = myXML.sub1.sub2: <sub2>hello</sub2>
<sub2>ok</sub2>
All is fine above and this was a bit long abstract for my question. The question is what happens to the root element, in this case <top>? I was trying to access the data with the following notation
myXML.top.sub1; // etc
I spent quite a lot of time trying to get it to work, until I discovered that the root element is not used. Can anyone explain this?
Or, I guess the simple explanation is that the root node is ignored and the sub nodes are created as properties of the object. The question also could be stated as: Why isn't this documented in the Flex API Reference?
Thanks.
P.S. I found this article on common E4X pitfalls which also has other interesting topics when working with E4X.its gone
downgrading would kill the phone.. -
I recently updated all of the computers in the house to itunes 11. Now when we try to import songs from homesharing, we are unable to. What happened to the conveniently located "import song" button on the old version of itunes. Please help an old mother out please!
diesel vdub, i use 11.1.1
solved the issue today. first sync with itunes, so all the stiff you bought on the mobile will be backuped.
1. uncheck sync music in itunes and sync. all the music will be erased from mobile device
2. check music player on the mobile device. just the unwanted songs will still be there
3. go on the iphone to settings, general, usage, music player. there is just a few mb from the remaining unwanted songs. swipeleft and erase the content. switch iphone off and on again
4. repeat step 2. there will be no data. otherwise repeat step 3
5. check sync music in itunes and sync. all the music will be back again but not the unwanted songs. -
In case of a DB crash what happens to the status of the Control File
When a DB is crashed will the Control file that exists in the OS also get corrupted, What happens to the Data Files , how to recover the Control files and Data Files , the DB in case there isn't any Backup media or any Dump available on the DB.
The only one way to recover a database is to be in archivelog mode.
And if I said about recover stricto sensu, that's because even in noarchivelog mode we need to use the command recover until cancel before an open with resetlogs option, even if we haven't any redo/archive logs. That fake a recover, this is what we say a mimic recover. Which is not a recover stricto sensu like it can be the case with archivelog mode.
Nicolas. -
What happens to the apps if I sync to another pc
ok here is the question, I know that if I sync apps to another pc they will going to erase and reinstall the apps from purchased apps section but what happens to the saved data or games.. as an example; I have Hay Day game.. the game is at a certain level right now and I want to keep it that way.. once I sync it, it will be erased and reinstalled.. will it save my game progress? or how can I save it?
Game settings and other data is part of the backup:
iTunes: About iOS backups
A manual backup before you sync for the first time will save your content to the new PC.
Follow this user tip by wjosten to save your data and settings to a new PC:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
or this one by turningtest2:
Recovering your iTunes library from your iPod or iOS device -
What happens to the outputs when I reconfigure the 6524 card?
I have an application where I want to recongure the card throughout my program. For example I might initially want to set a single 8 bit port, so I could use Dig_Prt_Config and Dig_Out_Prt. Then I might want to output a batch of data using buffered IO so I use DIG_Block_PG_Config and DIG_Grp_Config to configure the card again. My question is what happens to the output states when I do this. If the port is then assigned to a group what happens to the outputs at that point? Do they remain unchanged until I do a Dig_Block_Out or do they all turn off? I guess I will find out when I try it, but it would save me from throwing away code if I knew now,
Thanks,
DavidDavid,
I assume you have the 6534 board. On the 6534 board, reconfiguring the port will not affect the output value. Well, as long as the direction map doesn't change. Anyway, hope that helps.
Ron -
ISE - What happens when the on-boarded certificate expires?
I'm trying to design a good BYOD deployment model but have a few questions that need direct answers. I have down how to go about on-boarding and getting a certificate on a device, the ISE provides great flow for this to happen in many ways. My questions come from a design perspective before and after the BYOD deployment is completed.
1. Figuring out a method to validate the device is a Corporate asset or a BYOD asset.
(I don't want to install a certificate on just any device, or perhaps I do but I need to give permissions to all resources if its a Corporate Device, and more resitrictions if it's BYOD, so how do I figure this out during the provisioning phase?)
a. Use MDM (May not have one, or if you do we are still waiting on ISE 1.2 for that integration)
b. Build a Group for provisioning admins, if user PEAP-MSCHAPv2 account is from this group install a certificate. (issue here is that the end user looses administration of the device in the my device portal as the device is now registered to the provisioning admin)
c. Pre-populate MAC into ISE as all Corporate devices should be provisioned by I.T. before they go to the end user (I think this is good but can see push back from customers as they don't want to add more time to the process)
d. Certs on any IOS or Android device, provide access based on user group and do not worry if device is Company asset or not (I believe that this is the easiest solution and seems to be what I find in the guides)
e. Other options I have not thought about, would love input from the crowd
2. What happens to the device once the Certificate expires?
(I don't know the answer to this, my thought would be the user or device will fail during the authentication policy and this creates a mess)
a. Tell the user to delete the profile so they can start all over again (creates help desk calls and frustrated users)
b. Use MDM for Cert management (may not have one)
c. Perhaps the client uses SCEP to renew based on the cert template renew policy and there are no issues (this is me wishing)
Would appreciate some feed back and would like to know if anyone has run into these issues.Neno,
Sorry but I don't have any other info on using a public CA, Cisco says to use internal CA's for PKI. I think the best practice in 1.2 comes out will be to use one interface for Web Management and a different interface for Radius, profiling, posture, and on boarding. This way you can use your private CA for EAP and a public CA for web traffic. Have you tried a public CA bound to management and a private CA for EAP yet?
I did do a session on EAP-TEAP, they explained how it will work and also discussed EAP-FASTv2. EAP-FASTv2 is available now but you must use anyconnect as your supplicant. Microsoft and all other vendors will have EAP-TEAP native once it is fully released and comissioned as it will be the new gold standard for EAP. It will support TLS, MD5, and CHAPv2. If you are interested I have the PDF of the presentation I attended that shows the flow of how EAP-TEAP will work. This is much better than wasMachineAuthenticated and machine auth caching, which has many down falls.
I currently do machine and user auth I just don't require them. If Machine auth then allow machine on vlan-x with access to AD, DNS, and blah blah. Then a seperate rule to say user auth gets more access, although I require EAP-TLS for both and if you think about it you are accomplishing the same thing if your PKI is setup correctly. Make it so users and machines can only auto enroll, that way you know the only way they got their cert was from GPO policy. I won't go into anymore detail, but there is lots you can do. -
What happened to the "tuner" app? it's missing from itunes and apps store
What happened to the "tuner" app? I bought it a few days ago, and now it's not available when my friend searches for it. I checked itunes, the iphone apps, and even searched by music catatory rather than by name.
http://www.everythingicafe.com/forum/iphone-3g/tuner-app-mia-from-app-store-3223 0.htmlhttp://www.nullriver.com/
When you click on the TUNER link, it launches the itunes store and says this app is not available in the U.S. huh? not fun! I have half a dozen friends that are excited to try it out. I'm glad I got it while I could too. I wonder what triggered the removal?
Maybe you are looking for
-
what is the best way to link macbookpro to harman kardon 5.1 home cinema set to be able to play music from my iTunes lib.?
-
Hi, Can any one tell me how to bring checkboxs in a horizontal line???? Pls... Thx, Shashi
-
Connector for MQ in CE Java EE
Hi, Im attempting to create a resource adapter for connection to MQ from CE 7.1 In NWDS I have created a SAP Connector project and followed what instructions I can find importing libs from file system including; 1. com.ibm.mq.jar 3. com.ibm.mqjms.
-
Application Error has occurred in your process Leave of Absence performed
Hello, We have a leave process in SSHR Module.When we create a leave and send it for an approval then it is approved without an error. But when we update the leave and send it again for an approval then We are getting below error. Application Error h
-
Hi, I don't know how to solve this error. Here's the error - The request on https://caldav.calendar.yahoo.com/principals/users/pocebrondo/ generates a conflict. I don't know how to fix this. If someone out there who knows how to fix it I will appreci