What happens to battery life if alarm is not shut down?

If the ipod alarm is set and you don't notice it, what happens to the ipod? Will alarm be quiet after a few minutes? Will alarm not stop?
what happens to battery life if alarm is not turned off?

Not odd...On Verizon if it is not set up, you will hear a recording that says "Im sorry, but the party you are trying to reach has a vm box that has not been set up yet". It will show as missed if the phone is on, and will appear in the log if the phone is on. If the phone is powered off, the call does not show in the log when turned back on. It will appear as if it never happened. You will only know if you get a VM (if its set up) or if the person tells you, hey I called you!

Similar Messages

  • 802.1x what happens after EAPOL logoff if Port does not go down

    Hi all,
    we are using 802.1x machine-authentication with EAP-TLS and dynamic VLAN-assignment.
    lets say a device is successful authenticated and VLAN DATA is assigned.
    After a time the Device is sending EAPOL logoff for any reason, and is silent from this moment on ( does not send any packet).
    So the auth Session is cleared and the VLAN Assigment is removed ( looks like Port is assigned to VLAN0)
    So the problem is if the MAC is unauthenticated and POrt has no VLAN assigment it is impossible to send WOL Magig packet or similar staff ( INtel AMT)
    What will happen from here on? Does the Switch to try to initiate Authentication by sending an EAP Request periodic for ever until it receives EAP Response or EAPOL Start, or do we have to wait that Client ist starting EAP process
    thxin Advance
    Hubert

    You need to configure the following:
    dot1x guest-vlan supplicant
    It's a global knob to address this type of use-case. What'll happen when you configure the above is not only will the session be torn down after EAPOL-Logoff processing; the switch will continue to send EAPOL-Id-Requests out on the same port, but based on the lack of response to just this new set of requests can put the port into the Guest-VLAN since the client isn't answering.
    NOTE: I assume you know what you're getting into here with VLANs, since you might be changing the subnet and the machine may need to release/renew for an address. The Guest-VLAN could be the same as the existing ones though, so up to you.

  • My IPad is loosing battery life fast and I have shut down my apps

    My IPad is loosing battery power fast and I have turned off all apps I am not using

    Save Battery
    1. Lower brightness (Major)
    2. Turn off WiFi when not using
    3. Turn off 3G when not using
    4. Turn off Bluetooth when not using
    5. Minimize use of Location Service; you can turn it off for certain apps
    6. Turn off push notification (Major)
    7. Fetch new data less frequently or manually
    8. Turn off push mail (Major)
    9. Auto-check fewer mail account

  • After making a call I put my phone in my pocket and when I bring it out to make a call the player is on killing battery life. How can I shut the player off or prevent this from happening?

    after making a call I put my phone in my pocket and when I bring it out to make a call the player is on killing battery life. How can I shut the player off or prevent this from happening?

    Try to position your iphone that the screen is facing away from your skin.
    Make sure that the back part of your phone will be the one that will contact your skin inside your pocket
    Thats what i do:)

  • I do not know what happened, all of a sudden Firefox does not want to work anymore. Had been conected to audible. Retried about 4 times.... no luck had to force

    I do not know what happened, all of a sudden Firefox does not want to work anymore. Had been conected to audible. Retried about 4 times.... no luck had to force quit every time. The three Firefox app. into garbage, emptied garbage and redownloaded new version from Firefox. Reinstalled but same thing happened again... no connection.
    What can I do, I like Firefox better than Safari, had it for years on my Mac.
    Please let me know.
    (Note: I have also mentioned this on the automatic response to the malfunctioning).
    '''''Email removed by moderator to protect you from spam'''''

    Hey.
    I think it might be the problem with one of your plugins.
    Try to uninstall the webbrowser AND remove the storage from Firefox in your user-account (Linux: /home/username/.mozilla). You can check the list of installed Add-Ons in Firefox under "Extras => Add-ons" or by pressing Shift + Strg + A (Linux).

  • What happened is that my internet connection was not good so i downloaded .ipsw file from a torrent but now i cannot get it to update my ipad because ios 5.0.1 is out i tried copying files to ipad updates in the itunes folder but no help

    what happened is that my internet connection was not good so i downloaded .ipsw file from a torrent but now i cannot get it to update my ipad because ios 5.0.1 is out i tried copying files to ipad updates in the itunes folder but it still asked me to download a 700mb software update
    plz help

    If you downloaded the correct version for your iPad model (and the different models have different ipsw files), then you should be able to navigate to it in iTunes by pressing and holding the shift key on Windows (command key on Mac) when clicking the Check For Updates button.
    Message was edited by: King_Penguin

  • My MacBook Pro just shut down without notice. It had about 40% of the battery life. It will not turn back on and I noticed when plugged in the little light on the power cord is blinking orange, not a solid green like normal.  Anyone have this issue before

    MacBook Pro just shut down without notice. It had about 40% of the battery life. It will not turn back on and I noticed when plugged in the little light on the power cord is blinking orange, not a solid green like normal.  Anyone have this issue before?  I've only had this for about 3mos.  I called apple support. They tried one thing then said I have to take to the apple store. Unfortunately I don't have one nearby. So before I travel an hour+ away I thought is give it a shot on here. Thank.

    Hi S,
    Did they have you try an SMC Reset: http://support.apple.com/kb/HT3964?

  • Iphone 4 battery goes to half and iPhone shuts down.  I have to charge to power back on.  any ideas as to why this is happening?

    iPhone 4 battery goes to 50% and iPhone shuts down.  I have to charge it to power back on.  any ideas as to why this is happening?

    You may want to try this:
    1. Backup iPad
    2. Setup iPad as new. Settings>General>Reset>Erase all content and settings
    3. Test iPad thoroughly
    4. If everything is fine, restore backup to iPad

  • My iPhone 4 registered 60% battery and two minutes later completely shut down

    My iPhone 4 registered 60% battery and two minutes later completely shut down, next day it said it had zero battery and turns back on after plugging in for a few minutes... what's going on?  I was using the maps application in the minutes before it shut down on me.

    Maybe it's just the battery percentage display that is messed up?  Have you done the recommended monthly or so drain the iPhone down to the point it shuts down and then charge to 100%, to recalibrate the readout?

  • HT1414 My Ipod Touch have a black screen when an app shut down and I can not shut down the Ipod. The screen is still black and I did the press two buttons solution and it doesn't work. What I have to do now?

    My Ipod Touch have a black screen when an app shut down and I can not shut down the Ipod. The screen is still black and I did the press two buttons solution and it doesn't work. What I have to do now?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My mail is stuck, and the computer will not shut down. What should i do?

    My mail is stuck, and the computer will not shut down and the Mail is not responding. What should i do?

    Hi Clinton,
    This happens to all the time and this is what I normally do. (Press and hold the pwer button until the computer shuts down) but, this doesn't seem to answer the real issue. Its just like you cut of the power to shut it down.
    Kind Regards
    Francis

  • My iPod touch will not shut down to the black screen which causes my battery to drain with in an hour?

    My iPod touch will not shut down automatically which causes my battery to drain within hours? HELP

    Have you went to Settings>General>Auto-Lock and specified a shot time?

  • What is a memory alert and how do I shut down background apps?

    What is a memory alert and how do I shut down background apps?

    It's when the internal memory doesn't have enough space to operate apps or the phone.  You should do two things.
    1)  Double-tap your Home button.  You should see a row of apps at the bottom of the screen.  Tap on one and hold down until it wiggles.  Hit the red x in the upper right of the icon.  Do this for all icons.  Don't worry - you're not deleting the Apps, you're just shutting them down from multitasking
    2)  Do a hard reset of your iPhone.  Hold down the Home button and Sleep button.  Keep both held down until you see an Apple logo.
    This should clear the memory.
    Good luck!

  • My macbook pro will not shut down. It tells me that safari has cancelled shut down and to quit safari and try again, but every time I try to quit safari it won't let me. I need help...I don't know what to do.

    My macbook pro will not shut down. It tells me that safari has cancelled shut down and to quit safari and try again, but every time I try to quit safari it won't let me. I need help...I don't know what to do.

    Have you tried holding the power button down for several seconds? I would try the force quit as mentioned earlier first, or go to the Activity Monitor in Applications>Utilities and try force quit there.

  • What do I do when my macbook pro just shuts down and when I plug my charger in, it faintly blinks green and yellow and doesnt charge?

    what do I do when my macbook pro just shuts down and when I plug my charger in, it faintly blinks green and yellow and doesnt charge?

    Hi aaliyafrommarkham,
    In order to troubleshoot this, I would recommend that you start with an SMC reset. Information on this procedure can be found here:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

Maybe you are looking for

  • HR_MAINTAIN_MASTERDATA & PA40

    Hi All, I'm experiencing some issues with the usage of the Function Module HR_MAINTAIN_MASTERDATA. The scenario im trying to test is a New Hire. When i perform new hire in T-Code PA40 i only populate Infotypes Organizational Assignment, Personal Data

  • How can I index my external hard drive to my macbook reads it.

    I tried adding it to the privacy list then deleting it from that list ad nothing. I tried using terminal but I am a pc guy and couldnt get it to index the drive. Please help me, I need to be able to quickly search the drive for work. It is a macbook

  • Upgrade to apex 3.0.1 for ubuntu 7.04

    I've installed oracle-xe 10g to ubuntu 7.04 feisty and u want to upgrade apex v2.0 to v3.0.1 I installed the apex_3.0.1.zip file from the repository and copied under the oracle home directory. Also I couldn't run the sql*plus by using command line si

  • Cannot see EMC PowerPath devices from ASM instance on Solaris 10 x86

    Hello, I'm trying to use EMC PowerPath devices as ASM disks, but cannot see any usable disk from the ASM instance. My configuration: Hardware: Sun X4600M2 Solaris 10 8/07 x86_64 EMC PowerPath 5.0.2_b030 Oracle 10.2.0.1.0 The PP devices are /dev/rdsk/

  • Checklist toggle method error.

    I am  getting following error Invalid value in OPTION field of value table for IN itab operator. operator., error key: RFC_ERROR_SYSTEM_FAILURE. I have written code in checklist toggle action. Here in toggle action i have created the object of java c