What happens when NAC Server License Exceeds ?

Hi all,
Got a simple question for which I could not find the explanations ?
I know that licensing is run by the endpoints which are in Online User (posture assessed) list.
Lets say I purchased a NAC server with 100 License. What happens if a client connects to the network as the 101th user ? Is there a flexible licensing option as in other security products of Cisco ?
Also anyone has any info about the roadmap of licensing for Cisco NAC products ? Such as central management of licenses, license pools or etc. ?
Thanks in advance.
Any comments appreciated.
Dumlu

Thanks a lot.
You said "BPEL developer should make sure unique value is supplied for correlation..",but I am confused,
"BPEL developer" means business process developer(process caller) or bpel engine developer(process runtime enviroment developer) ?
This afternoon,I installed oracle PM and did some tests. The bpel server creates two process instances which have the same correlation data.

Similar Messages

What happens when an Enterprise License expires/is extended?

We run an Apple Enterprise License in our company for 3 iPad apps, and these apps are installed on about 130 iPads between them. Our Enterprise License expires on 19th April 2012 (about 1 month from now). We intend to extend our Enterprise License to 19th April 2013, however I understand the provisioning profiles installed on the iPads have a fixed expiry date. My questions are:
1. If I extend the license, will ALL apps with the current license stop working on 19th April 2012, and ALL users will have to reinstall the app with the new extended license and provisioning profile?
--OR--
Will the apps detect the new extended provisioning profile online and replace the current profile with the new license, thereby removing the need for ANY users to redownload their apps?
2. Also, if I extend our Enterprise License to April 2013, and re-deploy the apps today I imagine that all apps downloaded from today will have the extended license until April 2013. Fine. However what will happen to the apps with the previous licenses expiring April 2012. Will they continue to work until April 19th 2012, or will they get an error message such as 'Your provisioning profile doesn't match the profile associated with your Enterprise license online. Please reinstall'...
If anyone has experience with this, or is from Apple Support, I would really appreciate some expert advice/answers as I need to manage this transition carefully!
Cheers and regards,
Mark

Hi,
a parameter, that is set higher "than allowed" is NEVER replaced by any substitution value !!!
=> if it is correct, it will work - otherwise the system might not drive up or fail otherwise ...
Unfortunately, there are MANY parameters, where you should use values, that are "not allowed" and even a lot of parameters, that are totally unknown - all of them work as you set them ... hopefully with useful values ...
9000 in this case is recommended in nearly every GoingLiveCheck by SAP )
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

What happens when the multiply effect is applied to both the object and the graphic within?

Hi everyone,
I could really use some help with this...
I'm getting a booklet ready to be printed. Originally, half of the pages were to be printed on paper with a (physical) colour. For budget reasons however, I've now decided to print the paper colour, and have the content of the pages overprinted on the tint in the background, which I've applied to the pages in the background of an additional master page.
When I set the objects to multiply, they blend with the background colour, which is the effect I'm looking for, as there would be no 'paper white' on the pages that I want to appear as though printed on coloured paper.
There's something confusing me though; you can also set the graphic within the object frame to multiply. This makes the graphic appear darker, which I don't really understand, since there is no extra colour within the graphic that accounts for this. I've looked at the output in the resulting pdf, and it looks like it's not just an on-screen effect, but the extra amount of (in this case) yellow would also be visible in the printed result.
Does anyone have an explanation for this? Please see the graphic for a visual example.
Thanks in advance, kind regards
Robbin

Hi.
          Yes. There is a heartbeat mechanism between all cluster members so they detect when a
          member has left the cluster. The primary server recognizes when it's secondary server
          has failed, and then proceeds to search for another member of the cluster to make as
          it's new secondary.
          Regards,
          Michael
          David Whitehouse wrote:
          > I'm trying to figure out what happens when the server holding the replicated state
          > for an object fails.
          > Does the server with the primary object (or the replica-aware stub) recognize
          > the failure and select a new
          > server to hold the replicated state?
          >
          > For instance, Assume I have a cluster defined with three servers - 1,2,3 - with
          > an instance of object A on server 1
          > and the replicated state ino on server 2. What happens if server 2 fails? Is the
          > state now replicated to server 3?
          >
          > Thanks, David
          Michael Young
          Developer Relations Engineer
          BEA Support

What happens when cookie's capacity is exceeded

Hello
I have a small conceptual question. I use cookies to store values in my servlet and then use a .jsp page to retrieve values. Can you please tell me what happens when the size of my data in the cookie exceeds 4kb?
Thank you,

If you really need to associate data with the specific client longer than the session scope, then better store it all at the server side, in for example a database. Create a cookie at the client side with some unique identifier which is used as primary (or foreign) key of the DB so that you can get the associated data from the database whenever needed.

What happens when max job limit of few RAS server is reached?

Hi, I would like to know what happens when max job limit of server is reached. I know that we need to increase the job limit but my question is a bit different.
We have 7 RAS per servers. I got this message "The maximum report processing jobs limit configured by your system administrator has been reached" on 4 RAS servers but not all 7. I am tracking servers using PIDs on WIndows server 2003.
Does this means this is a warning that Job limit of 75 (in our case) has reached for 4 servers and for remaining 3 servers its still not reached. This means 3 servers are still able to handle more report request as they have not reached their max limit.
OR
This message means all of the servers have reached to their max limit and there is no more request which can be taken.
We are doing 3000 users performance testing on 21 RAS servers.
We are on BOXI R2 SP3 on IIS and opening crystal reports using .NET SDK.
Thanks,

This is same as my other question so I am closing this too. We have set limit as unlimited and during peak load we had almost balanced reports on all RAS.

What happens when license keys expire?

We might pass our expiration date before we get new licenses purchased. What happens when AV and Anti-Spam keys expire?

Hello Brian,
if a feature key expires, the service for that feature will stop working, however mail processing (receiving, filtering, reporting, delivery, etc) will continue as usual. In case you have placed the renewal order already, you might contact your Cisco IronPort Sales representative and ask for temporary keys until the renewal is finished, that is often posssible, and will keep you protected.
Hope that helps,
Andreas

What happens when multiple users access the same servlet?

Do the users share all the same resources? Or is a new process generated for each user? I have a servlet that builds a string to return to the user and I only have myself to test, so I can't really see what happens when many users access the servlet. Is there a possibility that the string will get screwed up, like when dealing with multiple threads, or do all the users get their own resources and I don't have to worry about that?

huh? if you can point a test servlet at it, you can point a browser at it (even if the servlet does not serve html it will run)
try pasting the servlet URL into a web browser
refreshing multiple browsers repeatedly could provide a manual test

What happens when HTTPS communication fails during certificate check?

Hello Experts,
I have a scenario where a Bapi functionality(server proxy) is exposed as a webservice .
So scenario will be SOAP -> XI -> Proxy (calls a BAPI)
Here we are going to use HTTPS (SSL).
I would like to know :
What happens when a check for certificate validation fails in XI? It may be due to invalid certificate, expired certificate or a request from unauthorised user-
- Will it be raised as a exception and we need to do some configuration to inform it back to Sender?
- Will the message fail in Moni with red flag ?
- Alerts will be created ?
Please share your experiences and expert sugestions.
Thanks in Advance!!
Regards,
XI Queries.

Hi Abhishek,
Thanks for the reply. I will keep this in mind and design the scenario & error handling accordingly.
Appropriate points awarded
Kind regards,
Xi Queries.

VDI3: what happens when the Primary VDI core fails?

A potential customer asked me this and I did not really know how to answer the question ... sorry if this was asked before. So here we go:
What happens when and if the Primary VDI core fails? Will the entire VDI3 setup go down? Will running sessions be lost? And how do you fix that?
I found this page:
http://wikis.sun.com/display/VDI3/MySQL+Cluster+Reconfiguration+Scenarios
So I assume the "Non-VDI host ==> Primary Management Host" scenario is what would need to be done?
http://wikis.sun.com/display/VDI3/MySQL+Cluster+Reconfiguration+Scenarios#MySQLClusterReconfigurationScenarios-NonVdiToPrimary
If this is correct then this would answer the "how do you fix that?" part. OK then.
But still I'd welcome if anyone could explain what exactly would happen when and if a Primary VDI core fails. The customer's opinion on this is that they are a "single point of failure" because the Primary VDI host is not redundant (as opposed to the 2 x Secondary VDI cores) ... So, is this assumption correct or not?
Thanks in advance.

Hi,
Assuming you have 3 VDI core hosts. One of them is the primary. And the primary goes down. So what happens then:
* The underlying database is still running on the remaining hosts
* All desktop sessions are still running on the remaining hosts
* New session requests will be handled by the remaining hosts.
* All desktops are still running on the virtualization hosts.
So in essence, your VDI cluster is still healthy. The operation is just impacted in this way:
* You can't add new VDI core hosts
* You can't change the configuration of the Sun Ray server failover group
* A failure of another VDI core host (data node) will result into a complete outage of the underlying database
You should bring up the primary again as soon as possible in order to gain failover capabilities again.
-Dirk

What happens when Skype for business evaluation expires?

I am testing Skype for business within my company before actually rolling out teh Skype for Business for all. I am using Skype for business evaluation version to test the features and/or and impact it would have on Lync 2013 existing users. I need to know
what happens when the skype for business evaluation patch expires on 1st May 2015, what will the users see? will it switch back to Lync 2013 on its own or do I need to uninstal the package to do so?
Best Regards,
Ketan Tank
+91 9881728161
[email protected]

Hi Ketan Tank,
Agree with Anthony, you can get the updates (KB2889923 & KB2889853) through Windows Update.
The Skype for Business Client will already be activated as it is an update to an existing licensed product.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

What happens when the Time Machine drive is full?

I'm on my second iMac. My first one (G5, 1984) died, and I replaced it early 2010 with an Intel mac. The transition when exceedingly well largely due to Time Machine. I just hooked the Time Machine drive to the new system, and I was soon back up running!
My home folder has 70GB of data. The Macintosh drive has 105GB of data and 395GB free. The Time Machine drive has 220GB used and 30GB free.
1. What happens when the Time Machine drive is full?
2. Do I have control over what backups get deleted?
3. If lightning strikes twice, will I still be able to restore my Intel mac like my G5 mac, even if backups get deleted?
4. Is there anyway to control what backups/backup files get deleted?
5. Any other thoughts?
Thanks.

maxseven wrote:
i have deleted the time machine folders and they are now in my trash. when i try to secure empty my trash it will delete everything but the t/m folders. how do i delete them?
Do you mean all of them? The entire Backups.backupdb folder?
That's a large mess. First, even a normal delete will take a very long time, as there are probably hundreds of thousands, or even millions, of files. Your best bet by far is to simply erase them with Disk Utility -- that will only take a few moments. If your TM drive has a single partition, see #1 in [Formatting, Partitioning, Verifying, and Repairing Disks|http://web.me.com/pondini/AppleTips/DU.html]. If there are other partition(s) on the drive, see #2 there.
If not, and you only deleted some of the folders, you have a different, worse problem. Unfortunately, Apple doesn't do a very good job of warning folks: +*Never move, change, or delete anything in your backups via the Finder or Terminal.+*
You shouldn't have to delete backups at all, since Time Machine will do that automatically when the disk/partition gets full. But you can do it without harm via Time Machine. See #12 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
A normal delete will take a very long time, as there are probably tens or hundreds of thousands of items, each of which must be individually deleted. A secure delete will take much, much longer, as each deleted file must be overwritten with zeros.

What happens when the CC trial ends? What happens when offline?

I need Lightroom to work offline on my laptop. What happens if I need to sign in to CC when there is no interned connection and what happens when the CC trial ends on both my laptop and desktop?

Thanks for answering. I have the standalone version of Lightroom 6 on my Windows 7 64 bit desktop. A number of times when have tried to open the program, the Adobe Application Manager has popped up requiring me to sign in even though I had not knowingly signed out. Lightroom will not launch unless I am signed in. Frequently when Lightroom launches, I see a "Server Busy" message telling me to "switch to the other program" without telling me which program to switch to. I have pinned the AAM to my notification area and have unchecked the "Show OS Notifications box" to see if the "Server Busy" message goes away. So far everything seems to be okay
Again, thanks for answering me

What happens when you get Error 1905??

ERROR 1905 MODULE C:/PROGRAM FILES/ITUNES/ITUNESMINIPLAYER.DLL
FAILURE TO UNREGISTER
HRESULT-2147200472
CONTACT YOUR SUPPORT PERSONNEL
Okay...so what do I do? After this it goes to "stopping services", but says it is unable to do that. Then when I open I-tunes it says that the part of the program where the computer connects to the ipod was not installed correctly. this is soooo frustrating. my brother's had an ipod shuffle for about 2 years so itunes was already installed. i was just trying to update it so my ipod video could be read.
iPod with Video Windows XP

Sorry no but here is some info anyway,
We increased MaxPermSize from 192 to 512
We also increased min and max JVM Heap size to 768 and 2048 respectively.
Since then I think we have not experienced this problem more than once.
We also have one server with the default parameters and it seems to work fine.
I believe that size, and number of simultaneous request/responses have an impact on this.
We will now install the latest updates and after that decide whether to start logging jvm activities or not.
Best regards
Lennart
Från: Neo Rye [email protected]
Skickat: den 28 november 2012 06:44
Till: Lennart Risfelt
Ämne: what happens when you get a "PermGen space null" error?
Re: what happens when you get a "PermGen space null" error?
created by Neo Rye<http://forums.adobe.com/people/Neo+Rye> in ColdFusion - View the full discussion<http://forums.adobe.com/message/4879436#4879436

What Happens when u kill a backgroud process

What Happens when u kill a backgroud process?
such as kill- 9 ora_smon
Will the oracle automatically perform recovery???
will the database startup?

If you want to face what actually will happen, just make it on test environment (test db).
Then check your db status, instance will be abort.
Do you know what SMON`s purpose ?
If you_dont_know then
make it; (ps -ef | grep smon take PID, then kill -9 PID);
end if;
SMON - System Monitor process recovers after instance failure and monitors temporary segments and extents. SMON in a non-failed instance can also perform failed instance recovery for other failed RAC instance.
Here you can read about Oracle background processes:
http://www.dba-oracle.com/t_background_processes.htm
and
http://download.oracle.com/docs/cd/B10500_01/server.920/a96524/c09procs.htm

What happens when Hyper-V replication is paused

Hi,
Could someone please point me in the direction of detailed technical information regarding what happens when replication is paused for a Hyper-V VM? I've had a dig around but not found anything..
Does the source system still generate delta's which accumulate on disk somewhere, ready to be sent to the target once replication is resumed in a similar way to SQL log shipping, or is the whole processes paused and a new replication cycle started?
I need to asses the impact of pausing replication on a number of VM's for an extended period (probably in the region of 4-6 hours) for maintenance on a host, where there is fairly limited replication bandwidth.
Many thanks.

Hi EntArch2012,
You can pause the replication between primary and replica server .
There will be a .HRL file beside the VHD file of the VM which enabled replica .
After you enabled replica successfully , the changes of the VHD will be stored in the HRL file then send to the replica server regularly to achieve synchronization .
Hope this article is helpful :
http://www.microsoft.com/en-us/download/details.aspx?id=29016
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

What happens when NAC Server License Exceeds ?

Similar Messages

Maybe you are looking for