What happens when the Main Flash is 25 fps and an external SWF file is 12 fps?

Hello everyone,
I have a Main Flash which is set to 25 fps. This Flash is
used to load an external swf file which was created using 12 fps. I
would like to know what really happens when the Main Flash loads
the external swf file? Does the Main file forces the external file
to be run on 25 fps or the swf file is run with its own 12 fps?
Any ways, if someone can take the time and explain this, I
would be greatful.
Thank you very much and have a great day.
Khoramdin

the external swf plays at 25fps - all loaded movies will take
on the frame rate of the parent movie.
Chris Georgenes
Adobe Community Expert
mudbubble.com
keyframer.com
http://tinyurl.com/2urlka
Khoramdin wrote:
> Hello everyone,
>
> I have a Main Flash which is set to 25 fps. This Flash
is used to load an
> external swf file which was created using 12 fps. I
would like to know what
> really happens when the Main Flash loads the external
swf file? Does the Main
> file forces the external file to be run on 25 fps or the
swf file is run with
> its own 12 fps?
>
> Any ways, if someone can take the time and explain this,
I would be greatful.
>
> Thank you very much and have a great day.
>
> Khoramdin
>

Similar Messages

  • I want to know what happens when the iPad battery gets fully charged and the charger is still connected

    When the battery gets fully charged, and the charger is still connected to the iPad, does the iPad use power from the battery or does it use the charger?

    Install Battery Doctor and see Battery Status or Charging
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    System Status will indicate charged when charging circuit is disabled
    http://itunes.apple.com/sg/app/system-status-activity-manager/id401457165?mt=8&l s=1

  • I have both the 250 gb high performance hard drive and a 1 ter byte hard drive.  What happens when the 250 gb hardrive is full?

    I have both the 250 gb high performance hard drive and a 1 ter byte hard drive.  What happens when the 250 gb hardrive is full? This on Imac desktop

    Never let a drive get more than 80% to 85% full.
    AND keep 50-100 GB of free space on a startup drive to allow proper function of virtual memory in all OS X versions from 10.5x to current versions.
    10.4x can get by with 20 GB of free space on the boot drive, but more is always better.
    I try and keep all boot drives between 50 and 60% of capacity.
    Beyond 60% and up to 90% capacity, seek times increase almost exponentially; performance suffers.

  • Lost my iPod, remotely locked it through iCloud. What happens when the battery goes out?

    Hello!
    I lost my Ipod, but managed to locate and lock it remotely through Find my iPod and iCloud. It was located once, but hasn't been located again in the last four days. I think the battery may have run out. What happens when the battery is charged and the iPod turned back on? Does the lock and everything else that can be controlled with Find my iPod still apply?
    Thank you!

    Yes, because when you remotely lock the iPod via Find my iPod, the lock code is set as the lock code that you would use to unlock the iPod if you used a passcode normally. As long as the iPod is still connected to your Apple ID, Find my iPod should work as log as the iPod is connected to wifi.

  • What happens when the multiply effect is applied to both the object and the graphic within?

    Hi everyone,
    I could really use some help with this...
    I'm getting a booklet ready to be printed. Originally, half of the pages were to be printed on paper with a (physical) colour. For budget reasons however, I've now decided to print the paper colour, and have the content of the pages overprinted on the tint in the background, which I've applied to the pages in the background of an additional master page.
    When I set the objects to multiply, they blend with the background colour, which is the effect I'm looking for, as there would be no 'paper white' on the pages that I want to appear as though printed on coloured paper.
    There's something confusing me though; you can also set the graphic within the object frame to multiply. This makes the graphic appear darker, which I don't really understand, since there is no extra colour within the graphic that accounts for this. I've looked at the output in the resulting pdf, and it looks like it's not just an on-screen effect, but the extra amount of (in this case) yellow would also be visible in the printed result.
    Does anyone have an explanation for this? Please see the graphic for a visual example.
    Thanks in advance, kind regards
    Robbin

    Hi.
              Yes. There is a heartbeat mechanism between all cluster members so they detect when a
              member has left the cluster. The primary server recognizes when it's secondary server
              has failed, and then proceeds to search for another member of the cluster to make as
              it's new secondary.
              Regards,
              Michael
              David Whitehouse wrote:
              > I'm trying to figure out what happens when the server holding the replicated state
              > for an object fails.
              > Does the server with the primary object (or the replica-aware stub) recognize
              > the failure and select a new
              > server to hold the replicated state?
              >
              > For instance, Assume I have a cluster defined with three servers - 1,2,3 - with
              > an instance of object A on server 1
              > and the replicated state ino on server 2. What happens if server 2 fails? Is the
              > state now replicated to server 3?
              >
              > Thanks, David
              Michael Young
              Developer Relations Engineer
              BEA Support
              

  • What happens when the Time Machine drive is full?

    I'm on my second iMac. My first one (G5, 1984) died, and I replaced it early 2010 with an Intel mac. The transition when exceedingly well largely due to Time Machine. I just hooked the Time Machine drive to the new system, and I was soon back up running!
    My home folder has 70GB of data. The Macintosh drive has 105GB of data and 395GB free. The Time Machine drive has 220GB used and 30GB free.
    1. What happens when the Time Machine drive is full?
    2. Do I have control over what backups get deleted?
    3. If lightning strikes twice, will I still be able to restore my Intel mac like my G5 mac, even if backups get deleted?
    4. Is there anyway to control what backups/backup files get deleted?
    5. Any other thoughts?
    Thanks.

    maxseven wrote:
    i have deleted the time machine folders and they are now in my trash. when i try to secure empty my trash it will delete everything but the t/m folders. how do i delete them?
    Do you mean all of them? The entire Backups.backupdb folder?
    That's a large mess. First, even a normal delete will take a very long time, as there are probably hundreds of thousands, or even millions, of files. Your best bet by far is to simply erase them with Disk Utility -- that will only take a few moments. If your TM drive has a single partition, see #1 in [Formatting, Partitioning, Verifying, and Repairing Disks|http://web.me.com/pondini/AppleTips/DU.html]. If there are other partition(s) on the drive, see #2 there.
    If not, and you only deleted some of the folders, you have a different, worse problem. Unfortunately, Apple doesn't do a very good job of warning folks: +*Never move, change, or delete anything in your backups via the Finder or Terminal.+*
    You shouldn't have to delete backups at all, since Time Machine will do that automatically when the disk/partition gets full. But you can do it without harm via Time Machine. See #12 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
    A normal delete will take a very long time, as there are probably tens or hundreds of thousands of items, each of which must be individually deleted. A secure delete will take much, much longer, as each deleted file must be overwritten with zeros.

  • What happens when the CC trial ends? What happens when offline?

    I need Lightroom to work offline on my laptop. What happens if I need to sign in to CC when there is no interned connection and what happens when the CC trial ends on both my laptop and desktop?

    Thanks for answering. I have the standalone version of Lightroom 6 on my Windows 7 64 bit desktop. A number of times when have tried to open the program, the Adobe Application Manager has popped up requiring me to sign in even though I had not knowingly signed out. Lightroom will not launch unless I am signed in. Frequently when Lightroom launches, I see a "Server Busy" message telling me to "switch to the other program" without telling me which program to switch to. I have pinned the AAM to my notification area and have unchecked the "Show OS Notifications box" to see if the "Server Busy" message goes away. So far everything seems to be okay
    Again, thanks for answering me

  • What happens when the iphone app won't open on iphone 4?

    what happens when the phone does not open and automatically shuts down the phone?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • TS3694 What happens when the iPhone needs an activation and it doesn't respond? Then it asks me to restore it but due to an unknown error (-1) the iPhone can't be restored.

    What happens when the iPhone needs an activation and it doesn't respond? Then it asks me to restore it but due to an unknown error (-1) the iPhone can't be restored.

    Thank you for your response. However, I have done that plenty of times and each time I try to restore my phone, it extracts the software and then when it says restoring with the loading bar, an error message comes up saying an unknown error has occurred.

  • My iPOD classic (last generation) shuts off when jostled--like what happens when the headphones come out.  Any fix for this?

    My iPOD class (last generation) shuts off when jostled--like what
    happens when the headphones come out.  Is there any fix for this?

    I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
    After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

  • What happens when the computer get too full of e-mails?  Will it automatically start deleting ... or give you some kind of warning??  I never delete personal mail right away since I might want to refer back to it, and then the first thing I know, I've got

    What happens when the computer get too full of e-mails?  Will it automatically start deleting ... or give you some kind of warning??  I never delete personal mail right away since I might want to refer back to it, and then the first thing I know, I've got a big backlog. 

    It will not automatically delete any emails; you will need to do that. You may suffer performance  issues in Mail  if you let your mailboxes become too bloated. And, aside from Mail, the files take up a lot of room are photos, videos, and music, so you might want to watch those - every once in a while, check how much hard drive space you have and make sure you empty the trash regularly. Checking your hard drive space: highlight your Macintosh HD icon on the desktop; hit Command  + I and check the total capacity, and how much is left.

  • What happen when the bill from buying iPad is missing do they need it if something happen to iPad or not... (urgent)

    What happen when the bill/warranty is missing...do they need it

    Where did you buy the iPad? (What store, and was it in person or online?)
    Matt

  • I want to know what happens when the iphone heats up by itself? Do i need to bring it in?

    i want to know what happens when the iphone heats up by itself? Do i need to bring it in?

    Basic troubleshooting is covered in the User's Guide, you should read and follow the steps provided.

  • TS4036 Error Message:  This iPad hs not been backed up for 3 weeks. Backups happen when the iPad is plugged in, locked and connected to Wi-Fi.

    How do I clear up this Issue?  Error Message:  This iPad hs not been backed up for 3 weeks. Backups happen when the iPad is plugged in, locked and connected to Wi-Fi.
    I plugged it in and it is charging now.  It will not allow me to unlock it and when I push the 'ok' button for the error message, it still appears....will not go away.
    Do I just allow it to charge and it will automatically backup itself?  If not, what do I do?

    Hold the power and home buttons at the same time until you see the Apple logo, then release.  This will restart the phone and give you access again.
    To troubleshoot your iCloud backup, try deleting your last backup by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, swipe across your backup and tap Delete, then go back and turn iCloud Backup back on again.  If it still won't back up, you may have an app that is preventing the backup from succeeding.  To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again.  If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again.  If it succeeds, turn some of your apps to On and try backing up again.  If it succeeds again, turn some more apps to On then try again; repeat this process until it fails.  Eventually you'll be able to locate the problem app and exclude it from your backup.

  • What happens when your iphone charger sets on fire and you tell apple about it ?.

    what happens when your iphone charger sets on fire and you tell apple about it ?.

    They make a decision. How did you tell Apple about it?

Maybe you are looking for

  • Bi publisher with new public session not working. Bug?

    Hello, I've got a problem with a bi publisher report I want to open from a url. I have a page 1 which is public, and I want to give the user following url to download the document:    MYURL/pls/apex/f?p=MYAPP:1::PRINT_REPORT=MYREPORT:::MYVAR:1 This g

  • IPod will sync, but works slowly and eventually freezes

    5th gen. black video ipod about 1.5 years old. use it daily, then one day i was shuffling and it froze. i reset using Menu & Center buttons, then got error message to restore w/ iTunes. restored w/ iTunes, tried to use. worked slowly and eventually f

  • Help with JTree Update

    Hi there, I need to do a simple thing with a JTree but I 've got a problem. Well I want to create a very very very simple bookmark function. I have a tree with the children and I want to add new children which are going to work like link for my progr

  • IPod Nano 5th Gen sound broken.

    My iPod nano 5th Gen 16g's sound quality last night got messed up and it is horrible, makes it unuseable. Also, when you change the volume, it shows that it is changing, but the sound does not change, it is "stuck" at the same volume. I tried restart

  • Can any bady send the WDJ application on event handler & plug  parameters?

    Hi, Experts, I have no idea no WDJ Event handler and plug parameters usage if any bady can send me few WDJ application or scenarios which is based on event handler parameters and plug parameters and method parameters.  Thans in advance, Shaber Ahmed.