What happens when there's no internet connection?

The only reference I can find to this is here
http://forums.adobe.com/message/4539999#4539999
But the thread is old and appears to have been shut down with no answer to the fundamental question.
Bottom line is that there are a 1000 valid reasons you may not have a connection and a 100 reasons that situation may not change for weeks.
So what happens, does CC just shut down?
Rob

Hi Rob,
I copied this from the Creative Cloud FAQ - http://www.adobe.com/products/creativecloud/faq.html
Do I need ongoing Internet access to use my Adobe® Creative Cloud™ desktop applications?
No. Your Creative Cloud desktop applications (such as Adobe® Photoshop® and Illustrator®) are installed directly on your computer, so you won't need an ongoing Internet connection to use them on a daily basis.
An Internet connection is required the first time you install and license your desktop apps, but you can use the apps in offline mode with a valid software license. The desktop apps will attempt to validate your software licenses every 30 days.
For annual members, you can use the apps for up to 99 days in offline mode. Month-to-month members can use the software for up to 30 days in offline mode.
So after 30 days it will attempt to connect, and give you a notification if it is unable to do but the software will continue to work.
Hope that helps,
-Dave

Similar Messages

  • If I upgrade to the plan that allows 5000 responses per form, is that 5000 per month? What happens when there have been over 5000 responses?

    What happens when a form reaches the 5000 responses limit? Is the limit refreshed?

    That's a comment in the file. It has no effect at all.

  • How can I prevent Firefox from starting in Offline Mode when there is no internet connection?

    Hey!
    When I fire up my laptop from standby it takes some time before the wireless internet connection is established. If i am too quick and open Firefox before that happens, it automatically goes into Offline Mode, which I hate a lot.
    Is there any way to disable this behaviour?
    I have already tried everything mentioned here: [http://superuser.com/questions/208146/can-firefoxs-offline-mode-be-disabled http://superuser.com/questions/208146/can-firefoxs-offline-mode-be-disabled]
    Also I found this addon, which unfortunately does not work with Firefox 11: [https://addons.mozilla.org/de/firefox/addon/disable-automatic-offline-mana/ https://addons.mozilla.org/de/firefox/addon/disable-automatic-offline-mana/]

    That shouldn't happen in Firefox 4 or later. You should just get a page not found or server not found message.
    Can you check the following setting?
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''offline''' and pause while the list is filtered
    (3) Look for '''network.manage-offline-status''' and reset it to False (either double-click or right-click/reset).
    Does that work?

  • Voice control does not kick in place of SIRI when there is no internet connection

    i have an iPhone 4s. i mainly use WIFI at both home and work. and am quite happy with SIRI. but when i leave home for work or am on my way back home after work quite often i press and hold the volume button to give voice command to call my wife. but SIRI does not work!
    well, because SIRI needs internet connection and i dont bother using mobile internet (cause then i will need to turn on 3G which drains my battery like nothing on earth) it can not work.
    but why does not my ordinary voice control kick in? since 4S is such a great gadget and is so smart in every way (apart from the pictures taken with the volume button could not be turned to adjust orientation in windows!) i was expecting this would be a normal thing to expect from it.
    anyways, hope someday they would fix this. 

    I'm assuming you can either use Siri or Voice Control, but not both.  I think if you turn Siri on the activation used to use Siri is removed from Voice Control and vice versa.  This is just my own theory.  Maybe a future software update might allow this.

  • Airport Express. No airtunes when there is an internet connection.

    Hello guys,
    Now I have my very own airport express problem. I will try to go into as much detail as possible.
    I own Airport express for about a month. It worked fine. Moved to the new apparent recently.
    I have HP Pavillion notebook. While without the internet in the new appartment i set up my AE to stream music to stereo in a bridge mode. It worked fine.
    Now my inet is on.
    I connected AE to modem via ethernet cable, set it in a bridge mode. After a while i got the wireless internet connection on my PC. When the PC is connected to the internet i cannot connect to the AE or get the Airtunes working.
    While reading the forums i've found out that i can change TCP/IP on PC to 164.192. and that will help me to connect to AE. I did, but at the same time the inet was gone.
    Summary: i have a working wi-fi internet connection while AE is in the bridge mode connected via ethernet to the modem, but have no airtunes. If i set my PC's IP to 164.192. i can get airtunes but no internet. Need to get this together.
    *The things i've tried already*: used AirPort Utility to set AE to "distribute IP", via DHCP. After that i rebooted my modem, AE and PC. PC and AE got IPs like 10.1.0. but no internet connection. Tech support of ISP said that it sees my PC, but PC has no IP on the net. While in this mode i also get the trouble connecting PC wirelessly to the AE and have to use hard reset to default settings for AE.
    Much the same result i get when trying to "share one IP via DHCP".
    Notes: PC's IP is set automatically. PC has internet connection via ethernet cable plugged directly into modem. Usual PC's IP is something like 77.122.
    As far as i understand the problem is with IPs.
    Please help me out. Thaks alot in advance.

    Ok, please try the following:
    o Power-down the modem, AX, and computer(s). Order is not critical.
    o While all of the network equipment is powered down, perform a "factory default" reset on the AX. When complete, power-down the AX.
    o Power-up the modem; wait at least 10-15 minutes.
    o Power-up the AX; wait at least 5-10 minutes.
    o Power-up the computer(s).
    Your computer should now be able to access the Internet through the AX. Please post back your results.

  • What happens when there is a conflict between develop settings stored in file metadata, and the catalog?

    Hello,
    Wondering if someone could quickly help me with understanding how develop settings are read back into lightroom... (I'm using lightroom 3.6) as I've just had a bit of a panic that my mis-understanding of the system might have screwed things up a bit!
    As I do all my image tinkering on a laptop with a small disk, I am often archiving directories of images to an old server we have, and then just bringing them back onto my laptop whenever I need them again. I have a single lightroom catalog on my laptop, and I thought (I now think wrongly!) that all my develop settings updates were stored solely in the lightroom catalog on my laptop, and as long as I kept a copy of the original jpeg images knocking around somewhere so that I could restore them to my laptop when needed, that I could always get back to the most recently edited version of my images. Often I copied a directory of images from the server to the laptop, edited them with lightroom, then deleted the jpg files from the laptop thinking the originals left on the server would be sufficient to restore my work later.
    However recently just before deleting a batch of jpgs from the laptop, I did a quick compare with the server and was horrified to realise that the files where different, and that changes *are* written to the jpeg files! Looking in lightroom I have the 'Include Develop settings in metadata inside JPEG [etc] files' turned on.
    My questions would be:
    1 - Have I lost work by effectively deleting the metadata from the jpeg files or is it also preserved in the catalog?
    2 - What would happen if some develop settings for an image were stored in the catalog, and a completely different set of develop settings were stored in the file - which would take priority?
    3 - Have I screwed up and if so is there anything I can do to minimise the damage? : {
    Many thanks for any advice!!
    Nicola

    My questions would be:
    1 - Have I lost work by effectively deleting the metadata from the jpeg files or is it also preserved in the catalog?
    2 - What would happen if some develop settings for an image were stored in the catalog, and a completely different set of develop settings were stored in the file - which would take priority?
    3 - Have I screwed up and if so is there anything I can do to minimise the damage? : {
    1. Lightroom ALWAYS stores the edits in its catalog file.
    2. Lightroom ALWAYS uses the edits in its catalog file. The information stored in the JPG is NEVER used to display the image in Lightroom.
    3. As long as you don't eliminate the photo from the catalog, you are fine, your edits are present in the catalog file and Lightroom will use those to display the image.
    As I do all my image tinkering on a laptop with a small disk, I am often archiving directories of images to an old server we have, and then just bringing them back onto my laptop whenever I need them again.
    If you have moved the photos to the server, using Lightroom (or using Adobe Lightroom - Find moved or missing files and folders), there's no need to bring them back to your laptop. You can leave the photos on the server, and access them on the server, and everything works properly

  • What happened when using non-TX datasource connection in a Transaction?

    Hi,
    I try to update a timestamp table in a transactional EJB method invocation.
    The table is in the same db where the entity bean stores. I get the
    connection via DataSource (non-transactional), and issue the sql statement,
    and then close the connection.
    My question is: is my update part of the EJB transaction? If yes, how do
    I manage to get the timestamp update out of the scope of the transaction
    since I just want to timestamp no matter wether the EJB transactional method
    invokcation succeed or fails. Do I need to explicitly suspend and resume
    the transaction?
    Thanks!
    -Chunbo

    Chunbo Huang wrote:
    >
    Hi,
    I try to update a timestamp table in a transactional EJB method invocation.
    The table is in the same db where the entity bean stores. I get the
    connection via DataSource (non-transactional), and issue the sql statement,
    and then close the connection.
    My question is: is my update part of the EJB transaction? If yes, how do
    I manage to get the timestamp update out of the scope of the transaction
    since I just want to timestamp no matter wether the EJB transactional method
    invokcation succeed or fails. Do I need to explicitly suspend and resume
    the transaction?Hi. Your update is non-transactional. It is not part of the EJB transaction,
    and will succeed or fail at the time you do it, regardless of the eventual
    fate of the EJB transaction.
    Joe
    >
    Thanks!
    -Chunbo

  • ERROR: 'Sky Go unable to load program information as there is no Internet connection'

    I was using Sky Go via my iPad and a T-Mobile hot spot generator (Hauwei) to watch programs whilst in my caravan in Devon. Suddenly it stopped working and I now whenever I try and use Sky Go I get the message 'Sky Go unable to load program information as there is no Internet connection'. Obviously I am connected. I have tried reinstalling Sky Go and have completely rebooted the iPad but to no effect. Why has it suddenly stopped working???
    Having returned home I have tried to connect again when the ipad is connected via my BTHomeHub2 but I still get the same message, I have also tried to use BBC iPlayer and I am getting the same error message. What has happened????

    nikhildhoot wrote:
    When the router has an internet connection, the phones automatically connect to the router flawlessly. When there is no internet connection, we get a notification saying "Wi-Fi Connection Limited"
    The limited WiFi Connection issue when there is a good internet connection, is a known issue in the OS releases in the past six months, and has been corrected as far as I can tell on the most recent 10.2.1.3xxx or higher OS.
    But, I would note that when your router has no internet connection, you should expect to get that notification... no internet connection > limited wifi connection.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Lack of options in iCloud control panel compared to MobileMe Control panel, so now what happens if there is a conflict of data (Cloud vs  Computer)?

    Back then when we were syncing with MobileME, the control panel allows us to decide what to do when there is a conflit of data in the cloud vs the information on our computer.  We were given the option of Replacing information in Me with information on the computer or vice versa, but now we do not have any of these options.  And currently when i sync my computer with icloud, i dont know if the information (Contacts, Bookmarks) will be replaced with the current informaiton on the iCloud (transfered from MobileMe) or they will merge (if they merge then i would have double of contacts,bookmarks??) or the information in the iCloud would be replaced?
    If we had more options in the control panel of iCloud, then things can be simplier.  However, with the current iCloud control panel, we have no way of knowing what happens when there is a conflict and we won't know what action the iCloud would take for the conflict of information.
    So currently i still dont know if my Favourites (Bookmarks) will be replaced or not.
    Does anyone know if we can wipe out the info on iCloud and replace it with the data (Contacts, bookmark, calendars etc) on our computer?

    This is what I did...not ideal but seems to work for right now till iCloud actually syncs contacts into Outlook 2010 (PC/Win 7) like Mobile Me used to.  I opened the contacts in the iCloud contact address boxes in Outlook.  I selected all contacts by selecting one and then Ctrl-A (selects all), then Ctrl-C (copies all).  Then I went into the Outlook Contact folder which is blank from iCloud "stealing" all my contacts and in that empty box I hit Ctrl-V to past all contacts in.  I am now able to use my contacts when emailing in Outlook.
    Of course, any changes I make to my iPhone contact list or via iCloud will only sync back to the iCloud contacts lists in Outlook (and not Outlook's main calendar) so occassionally I'm thinking I'll need to go back and do this all again either figuring out a way to only copy new contacts over, or going into Outlook Contacts and deleting all of those, going back to Outlook iCloud contacts (which are syncing but not communicating with other aspects of Outlook like mail) and then do the process all over (select all, copy, paste).
    Seems silly that contacts can't work the same as they did with Mobile Me but it seems like Apple has a tendancy with everything but their actual iDevices to be screwy when things are working and make things more complicated.  I was not looking towards this day as I knew there would be some stupid issue as it seems like it always is that way with their new software rollouts.  In fact, I use Outlook 2010 through Parrells still cause their Mac version still won't sync even calendars...at least iCloud is still doing that with Outlook 2010 Windows...though still the same issue as Mobile Me that it doesn't sync with the main calendar...but I can still use it and sync well to the iPhone.

  • What happens when error record

    Hi ABAP Gurus,
    Iam phaneendra can anybody explain in detail
    what happens when there is an error record exist while updating a session in session method and in call transaction.
    ie, out of 10 records 7th one is error let it be then what happens to 6 redords that 7th record and 8th 9th 10th records.
    and also what is assychronous and synchronous
    process .thatly in updation.
    good answers( helpful answers must be rewarded)
    regards,
    phaneendra.

    Hi,
    In Session Method all the 9 records will be updated except the &7th record(error record). u can get the error information in SM35.
    In call tranasction method it depends upon the mode(A,N,E). In all screen mode system will stop at 7th record and all the previous 6 records will processed. In No screen mode all the 9 records will be updated except the 7th record(error record). and track the error u have to use BDCMSGCOLL in ur program(for call transaction).
    Asyn-- System does not wait for Acknowledgement. but in Syn--- System waits for acknow.  For this reson Asyn process is fast as compare to Sync.
    Thnaks,

  • What happens when an error record appars

    Hi ABAP Gurus,
                   Iam phaneendra can anybody explain in detail
      what happens when there is an error  record exist while processing a  session in session method and in call transaction.
    ie, out of 10 records 7th one is error let it be then what happens to 6 redords that 7th record and 8th 9th 10th records.
                   and also what is assychronous and synchronous
      process .thatly in updation.
    good answers( helpful answers must be rewarded)
    regards,
    phaneendra.

    Hi,
    This is BASIS forums can you put this query in abap forums and get the proper soluiton.
    Regards,
    Anil

  • I was downloading some songs when I lost my internet connection. There is no sign that these songs reached my iTunes but i have been charged for these songs anyway. What should I do?

    I was downloading some songs when I lost my internet connection. There is no sign that these songs reached my iTunes but i have been charged for these songs anyway. What should I do?

    It's possible that the message you got was to update the AirPort Express Base Station's (AX) firmware...and that something might have gone wrong during the upgrade.
    Let's start by performing a "factory default" reset on the AX to get it back to it's original "out-of-the-box" condition.
    Then, let's set it up to work with your cable modem...
    AirPort Express Base Station Setup (AX) w/High-Speed Cable Modem
    Modem/Router Power ReCycling (optional)
    - Power-off the Cable modem, AX, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
    - Power-on the Cable modem; Wait at least 30 minutes.
    - Power-on the AX; Wait at least 5 minutes.
    - Power-on the computer(s)
    Setup the AX
    With the network components powered down, set up the AX, using the AirPort Admin Utility, either connect to the AX's wireless network or connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
    AirPort tab
    - Base Station Name: <whatever you wish or use the default>
    - AirPort Network Name: <whatever you wish or use the default>
    - Create a closed network (unchecked)
    - Wireless Security: Not enabled
    - Channel: Automatic
    - Mode: 802.11b/g Compatible
    Internet tab
    - Connect Using: Ethernet
    - Configure: Using DHCP
    - WAN Ethernet Port: Automatic
    Network tab
    - Distribute IP addresses (checked)
    - Share a single IP address (using DHCP & NAT) (enabled)
    Do not, at this point, set up any security (i.e., WEP/WPA encryption, closed network, etc.) to first make sure the AX is operating properly. Try to access the Internet wirelessly with your MacBook. If you're successful, go ahead and add any security features you wish.

  • What happen when we connect Two PC with IP from Same subnets

    Scenario 2nd : What happen when we connect Two PC with IP from Same subnets. PC1 -192.168.10.1/24 PC2 - 192.168.10.2 on a two different L2 Switch on different vlans which are connected via a LAN cable.
    All ports are access ports
    Interview Question : No More Info.
    Pc1<SwA>------<SwB>PC2
    Q.1 Will they communicate If yes what will be packet/frame flow.
    Q.2 If not where will be the packet/frame drop. ? Why.
    I need step by step if possible plz how the packet moves , vlan taggings n all internal works that happens behind .. plz 
    thnx in advnce ....

    Hi Abhishesk,
    The PCs should communicate each othet.
    Since there is no trunk port involved, there is not tagging involved.
    Since both the PCs are into the same subnet. PC1 will not need default gateway for the communication with PC2. So PC1 will start with sending ARP request for PC2 MAC address.
     Since all the ports in SW1 are in same VLAN, the ARP should reach all ports including the switchport where SW2 is connected to.
    Sw2 has got a complete different access port on ALL the switchports. Sw2 will receive the ARP from Sw1. Remember that there is no tagging for the frame. Hence Sw2 will again send the ARP packet to all the ports which belong to same VLAN wherein the packet is received. ie, Sw2 will send the ARP packet to all the ports in Sw2. PC2 will also get the the ARP.
    The ARP reply will make it way back using the same logic.
    Now both the PCs can start the actual packet exchange.

  • I recently downloaded Parallels 9 to my imac so I could install Windows 7 Home Premium and had no trouble everthing is working fine the only question I have is is there a benefit to migrating the 2 together and what happens when I do Thanks.  Ricco

    I recently downloaded Parallels 9 to my imack so I could install Windows 7 Home Premiumwith no problem and everthing is working fine, and I was thinking of Migrating the 2 2 and was wondering what benefits there would be and what happens when I do.

    Windows 7 will peer down through the VM and remember what hardware the VM is installed on. Migrate the VM to different Mac hardware, and on first boot, Windows 7 will advise you that you are not using genuine Microsoft Windows. It will then treat you as though it believes you misappropriated it.

  • If I have two laptops connected to a single wireless hard drive, what happens when one laptop wants to go on a trip and the other one needs to stay home?

    if I have two laptops connected to a single wireless hard drive (i.e. Time Capsule), what happens when one laptop wants to go on a trip and the other one needs to stay home?  I'm afraid I know the answer, but I'm hoping Apple has a great solution to my problem.

    What if this little piggy goes to market but this little piggy stays home?
    The computer on a trip will do snapshot backups on the hard drive that will then be incorporated into the Time Machine backup once you get it back home. See
    OS X Lion- About Time Machine's "local snapshots" on portable Macs
    Open the Terminal in the Utilities folder and enter or paste the appropriate command line. Press RETURN and enter your admin password when prompted. It will not be echoed.
    To turn them ON: sudo tmutil enablelocal
    To turn them OFF: sudo tmutil disablelocal
    Note that turning them OFF will also delete all existing snapshots.

Maybe you are looking for