What hard drive do i need to buy for macbook 2007

Hi im looking to upgrade my 80gb hard drive in my 2007 macbook, what do i need to buy just any 2.5" sata or has it got to be an apple specific one?

any 2.5" sata, there are no specific ones for apple See here for suggestions: http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/

Similar Messages

What specific type of portable hard drive do I need to purchase for my iMac 10.5.8?

I have an older iMac 10.5.8 and want to purchase a portable hard drive. I know I need a specific one for such an older computer.
Can you tell me what to ask for when I purchase one?

Generally, any USB or FireWire drive will work, but you should avoid USB drives if your computer's ports are only USB 1.1.
(104576)

What size external hard drive do i need to backup my macbook pro?

I know I need to backup my computer, especially since I have been experiencing some problems with it and will need to take it into a store to get looked at, but I do not know what size external hard drive I need to back my computer on.

Drives are so low in cost today, go for something that will meet your needs for a while...if you are going to use Time Machine, get a drive large enough that you can have a partition double the size of the internal drive for TM backups, and a partition you can use for more storage and work space.
A decent drive like the Mercury Elite Pro 2 TB drive OWC sells goes for less than $200 (US) now. Has a fast interface and is easy to setup.

What FireWire 800 drive (2.5") to build/buy for MacBook Pro?

Hello community, this topic is to request a little help choosing a FireWire 800 storage solution. About once every two days, I need to run a virtual machine, either Windows XP or Ubuntu. The disk image is currently located on an external USB 2.0 Western Digital hard drive, which is also used for not-speed-sensitive storage. Performance is decent, as long as I quit all possible application before launching (I have 4GB RAM, planning on 8GB upgrade very soon) and don't launch too many apps in the virtual machine, however, I feel performance is lagging since I can see the virtual hard drive indicator turning red most of the time, and the 4 white LEDs on the WD going back and forth (although it doesn't necessarily indicate heavy activity). Especially, restoring to and from saved states routinely takes 45 seconds or more. The external drive is about 90% full most of the time, and may be a contributing factor to the slow feeling. Hence, I thought about putting this FireWire 800 port to good use, and plug a compatible drive in it. I had the following requirements:
3-year warranty an absolute minimum, 5 years
would be ok (my current WD MyPassport has 5). Reason is I consider if manufacturers trust their drive for 5 years, it shouldn't be a source of worry for many years to come. I consider 2-year warranty to be substandard drives.
2.5" form factor. Reason is I rarely happen to have enough room or steady power to lay and plug a full 3.5" drive, unless it uses a battery, which is extremely rare and would add bulk in my bag.
Ability to saturate FW800 port. I think a more performant drive would be a waste of money since they constantly go down in price, and I may be able to get a better deal by the time I switch to Thunderbolt-based MacBook Pro. Admittedly, this is a "soft" requirement, given expected use.
Under $150 (would come to $170 tax,S&H included)
I understand pretty well that the two latter points come in opposition and need a compromise, so I think a large compromise on drive size is to be expected. So far, I thought about these solutions:
Fully manufactured, i.e. Seagate FreeAgent GoFlex + FW800 dongle. Major drawback: dongle is expensive, and appears to use a proprietary connector. If it breaks, impossible to replace it quickly. Alternative: LaCie Rugged (pretty big for a 2.5" drive), G-Tech (usually quite expensive).
Handmade from performance platter drives, i.e. Western Digital Scorpio Black + FW800 enclosure. Major drawback: wouldn't saturate a FW800 port since it comes in SATA300 flavor only, but I get the strong feeling it would perform better than many manufactured drives.
Handmade from SSD, i.e. Corsair + FW800 enclosure. Major drawback: from this page, major compromises would have to be made on capacity. Affordable SSDs seem to be limited to 40 or 60GB, and while I don't put capacity as a priority, I may have to use the high-performance drive for other tasks, such as editing short high-def movies, or add a third virtual machine. Considering the Windows virtual drive needs to be around 15GB, and 25 for Ubuntu, 60GB wouldn't leave enough elbow room.
What solution would be better advisable, and what arguments would you put forth for it?

Reply on a dead topic:
After a word, Macally used the Oxford chipset. So Macally I went, and put a Scorpio Black 500GB inside. Ran fine, but I got it stolen in a coffee shop a few days after I started to use it. Had no time yet to do a backup, so data was lost. Surveillance cams weren't working at the time of the theft, nobody has seen anything, and, as usual, police won't do anything about it.
Second drive I got was also a Scorpio Black I put inside the Mercury Mini enlosure from OWC. Marginal difference experienced from the Macally, but most recent Oxford chipset would ensure fewer head parkings, that are very noisy and unsettling, so much I thought there was something wrong with the drive, and still think there is, despite reassurance from Western Digital.
The mobile drive I happen to use is the lesser-performance G-Drive from Hitachi, a 750GB version.

What hard drive do I need?

Hey y'all, I need to replace my broken HD from my iMac PowerPC G5 (before Intel and iSight). Am I correct thinking it needs a 3.5 inch SATA or SATA II drive at whatever size I can afford? Are there any ones out there particularly good or bad? Thanx as million

You have the specs exactly correct, look at [macsales.com] or [newegg.com] for a new drive, and make sure you get a good guarantee, then you should be ok.

How big a hard drive do I need for iMac and Time Machine?

Sorry if this has been answered elsewhere already. I am going to buy an iMac, probably the new 24" with a 320G internal HDD. I already have one Lacie external 320G HDD so I was wondering whether I can use this for Time Machine backups, or do I need to buy a bigger one? If so, how big? Is there a rule of thumb for working out how much hard drive space you need to have for Time Machine, for instance if I were to buy the 500G iMac what would I need?
thanks.

I agree with the "double the size" rule of thumb. You should also consider how much of the 320GB you are actually using and are likely to use in the next year or two. After all, it's the amount of storage you use that matters, not the size of the disk. Disks will very likely be cheaper soon. You should also keep in mind that TM deletes old archive data when it runs out of disk space. So as long as you have more disk space than you have data to back up, TM will work, though you will lose older versions of your data.
So if your 320GB drive only has 100GB used and you're not the kind of person who eats up disk like there's no tomorrow, the 320GB drive should be fine for now. If you expect that 320GB disk to be full soon then a 750GB TM disk is more like what you need.
The same logic applies to a 500GB iMac. If you only expect to use 250GB in the next year or two then a 500GB TM disk should be OK. A 1TB drive will be a lot cheaper next year or the year after.

After hard drive crash I needed to authorise my pc again. itunes tells me iphone cannot sync as pc not authorised. when I try to authorise the pc, itunes tells me pc is already authorised... what can i do?

After a recent hard drive crash I needed to authorise my pc again. I first de-authorised all previous computers (there was no other option)
Then I authorised the pc with the new hard drive.
then I tried to sync
Then itunes tells me iphone cannot sync as pc not authorised.
when I try to authorise the pc, itunes tells me pc is already authorised...
I have been playing this game 10 times now ... "cannot sync because pc not authorised" and then "cannot authorise as already authorised"
what can i do?
thanks

yes, a few times. the number of authorised computers decreases and increases from zero to one and vice versa accordingly. yet I am still being told that it cannot sync.

I just formatted my hard drive and I need to find out what my "wireless password is"

I just formatted my hard drive and I need to find out what my "wireless password is". I was in a hurry when I did format my PC that when I got to given my wireless a password, I used the same one as before. Now I have tried to finding what it is for my other products, I don't know where to look. Do I or can I change the password without losing anything? Need help PLEASE
[Personal Information Removed]

Hi:
You need to read your router's configuration instructions on how to access the router's menu.
Hopefully you can access that and in the wireless security menu you will find the passkey to use.
Paul

I had spilled soda on Mac keyboard the other day. Dried it as best I could , took battery out Nd hard drive. I let it sit for a little bit and turned it back on and I get a beeping sound. What do I need to do?

I had spilled soda on Mac keyboard the other day. Dried it as best I could , took battery out Nd hard drive. I let it sit for a little bit and turned it back on and I get a beeping sound. What do I need to do?

That isn't good. The RAM is probably damaged, hopefully not the RAM slots. This article explains why.
Never leave food nor drink near your computer again.

Which external hard drive do i need to transfer my files from my G4 with OS 10.3 to my new iMac?

I have a Mac G4 PowerPC (with: processor speed of 1GHz, 1 MB L3 cache) running OS 10.3.9. I want to transfer my files from the G4 to my iMac (.21.5/2.5QC/2X2GB/500GB/6750M) which is still in the box, for the last 3 years. I believe it is running OS Mountain Lion. All the Mac-compatible external Hard drives i have looked at are for OS 10.5 or 10.7 and above. Are there any external hard drives for sale that will work with my OS 10.3.9 to transfer files to my iMac? If not, how can i do this transfer of files?

An external hard disk drive enclosure with FireWire400/800 ports, with others
may be able to be used; but not as an adapter from one kind of port to another.
The old iMac uses USB, perhaps as slow as 1.1; that won't work with newer
USB3.0; but both the newer and older computers could use FireWire; or maybe
ethernet for computer to computer.
Newest models have Thunderbolt data ports, so adapter cables are needed.
And then you'll need cables to match whatever combination you end up with.
{You may have tried something or another, but not posted back to say if you did.
And this thread is nearly two weeks old, now. I just happened to find it here.}
For what you suggest, you may be able to find a suitable cable, perhaps FireWire
or Ethernet, depending on the ports available and cables still applicable to both.
Does newer iMac have FireWire ports? You could buy a FW400 to FW800 cable where
the ends are different, if the newer machine has FireWire800. [The old one has FW400.]
This would have to be equipped with the protruding connectors so each could make
the connection between each computer's built-in ports. Not all cable sets do this.
This would be the fastest way to copy content between machines, if FW 800 in newer mac.
Port-powered external hard drives may be under-powered and fail to work, so that is why
I suggest enclosed HDD with its own AC power adapter that will not rely on FW or USB
for the power to run the drive and the electronics inside the enclosure.
example of external enclosures with multiple ports and its own power adapter:
http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
This is an image of the lesser model series with fewer ports. The FW800 and USB3.0
are both backward compatible to their older counterparts, FW400 & USB2.0. But even
so the old 1GHz iMac G4 with USB1.1, would not be able to use newer USB3.0; yet
should be able to connect via FireWire400 to FireWire800 by special cable.
If the iMac G4 is still working, that's a plus. Attempting to remove the old IDE/ATA HDD
and access it outside the PowerPC iMacG4, is really a troublesome effort, one to avoid.
But the PPC iMacG4 can be started in Target Disk Mode and accessed as a hard drive
via FireWire cable, too. Then files can be seen as though the old Mac is an external HD.
In any event...
Good luck & happy computing!

Qosmio G10-100: HDD has failed - what HDD size do I need to buy?

My hard drive has failed after 4 reliable years. What size HD do I need to buy? (2.5" or 3.5")
Any other compatibility things to consider when purchasing an internal notebook HD?
Thanks!
Ben.

It seems the largest 2.5" Toshiba IDE drive available 120Gb (based on http://sdd.toshiba.com).
Thanks again,
Ben.

A135-S2326 replacing hard drive (bad sectors) Need advice and opinions Please

Hi, (note pic below of my computers actual specs from this morning)
I have a Satellite A135-S2326. It has the max memory at 2GB, it came with 512 and I upgraded to 2GB. It runs Windows Vista Home Edition...
Anyhow, it accidentally fell off my bed a few days ago (darn dogs) and damaged my hard drive. Boot problems, errors, bad sectors, etc. I have tried everything to fix and to no avail. While I am currently using it I know I need to replace the hard drive ASAP before I can't turn it on at all one day... I am now saving all my files and stuff I need off of it to an external drive. The laptop did not come with a windows Vista restore CD so I am using Acronis software to make an image of the hard disc, hopefully it will work and I won't have to purchase my own copy of windows Vista.
Some questions I have are:
1.) Is it possible to upgrade the hard drive to a faster one / better one when I replace?
     The hard drive that came preinstalled is a Hitachi HTS541680J9SA00 80GB, which I believe from spec's documentation is a 5400RPM Serial- ATA ???
     What is the max size I can get for replacement and what is the max RPM, or do I HAVE to use a 5400RPM???
     What do you suggest?
2.) I have a copy of windows XP Professional w/SP2. Is it possible to put this windows XP Pro.w/SP2 on a fresh hard drive in the Satellite A135-S2326? If so, is there a different hard drive that I must have to do that? Also if an XP install is possible on a new hard drive, which drivers must I have for this laptop when I do it??
3.) And finally, could this laptop handle windows 7 business? Only asking because I can get a VERY cheap copy of windows 7 business from my school...I'm in college at DeVry and can get a copy of Windows 7 delivered to my door in 2 weeks for less then $30.00. So thought that MAY be an option....??? Not sure if my other spec's can handle it though???
4.) What would you suggest I do with the options I have, what is best thing to do in your opinion??
      Please see pic below of my actual computers specs from this morning, using Belarc Advisor...
Thank you in advance
Any help is GREATLY appreciated
Urgently waiting replies,
Tina from Florida
(tinafromflorida)
Computer Profile Summary
Computer Name:
Beanersputer (in MSHOME)
Profile Date:
Monday, September 21, 2009 9:29:54 AM
Advisor Version:
7.2x
Windows Logon:
nello
Operating System
System Model
Windows Vista Home Basic Service Pack 2 (build 6002)
TOSHIBA Satellite A135 PSAD6U-01800D
System Serial Number: 37334232K
Enclosure Type: Notebook
Processor a
Main Circuit Board b
1.60 gigahertz Intel Celeron M 520
64 kilobyte primary memory cache
1024 kilobyte secondary memory cache
Board: TOSHIBA IAYAA 1.00
BIOS: TOSHIBA V1.20 03/06/2007
Drives
Memory Modules c,d
78.45 Gigabytes Usable Hard Drive Capacity
13.51 Gigabytes Hard Drive Free Space
MAT**bleep**A DVD-RAM UJ-850S ATA Device [CD-ROM drive]
Hitachi HTS541680J9SA00 [Hard drive] (80.03 GB) -- drive 0, s/n SB2204SGCULZ6E, rev SB2OC7DP, SMART Status: Healthy
1918 Megabytes Installed Memory
Slot 'J401' is Empty
Slot 'J400' has 2048 MB
Local Drive Volumes
c: (NTFS on drive 0)
78.45 GB
13.51 GB free
Network Drives
None detected
Users (mouse over user name for details)
Printers
local user accounts
last logon
nello
9/21/2009 9:17:22 AM
(admin)
local system accounts
    Administrator
9/1/2007 9:32:47 PM
(admin)
Guest
9/12/2009 1:14:34 AM
Marks a disabled account;   Marks a locked account
Adobe PDF Converter
on Documents\*.pdf
Microsoft XPS Document Writer
on XPSPort:
Send To Microsoft OneNote Driver
on Send To Microsoft OneNote Port:
Controllers
Display
IDE Channel [Controller] (4x)
Standard Dual Channel PCI IDE Controller (2x)
ATI RADEON XPRESS 200M Series [Display adapter]
Generic PnP Monitor (19.7"vis)
Bus Adapters
Multimedia
ENE CB1410 Cardbus Controller
Microsoft iSCSI Initiator
ATI I/O Communications Processor USB 1.1 OHCI controller (2x)
ATI I/O Communications Processor USB 2.0 EHCI controller
Realtek High Definition Audio
Communications
Other Devices
TOSHIBA Software Modem
6TO4 Adapter
6TO4 Adapter
6TO4 Adapter
6TO4 Adapter
6TO4 Adapter
Atheros AR5006EG Wireless Network Adapter
isatap.domain_not_set.invalid
isatap.gateway.2wire.net
isatap.launchmodem.com
isatap.
Microsoft 6to4 Adapter #2
Microsoft 6to4 Adapter #3
Microsoft 6to4 Adapter #4
Microsoft 6to4 Adapter #5
Microsoft 6to4 Adapter #6
Microsoft ISATAP Adapter #2
Microsoft ISATAP Adapter #3
Microsoft ISATAP Adapter #4
Microsoft ISATAP Adapter #5
Microsoft ISATAP Adapter #6
Microsoft ISATAP Adapter #7
Realtek RTL8139/810x Family Fast Ethernet NIC
Teredo Tunneling Pseudo-Interface
Networking Dns Server:
Acronis Backup Archive Explorer
Microsoft AC Adapter
Microsoft ACPI-Compliant Control Method Battery
Logitech Driver Interface (2x)
HID-compliant consumer control device
HID-compliant device (2x)
USB Human Interface Device (2x)
Standard PS/2 Keyboard
Logitech HID-compliant Cordless Mouse
Synaptics PS/2 Port TouchPad [Mouse]
USB Composite Device
USB Root Hub (3x)
Generic volume shadow copy

You can use ANY 2.5" SATA hard drive of any size in that system. I would recommend one of the Western Digital Scorpio BLue's as they are reliable and offer good performance.
If it runs Vista it will run Windows 7. I would wait a bit before trying Win7 though as Toshiba hasn't released all of the Windows 7 drivers yet.
As for Windows XP, while it is possible to install XP on that system (and quite easily for that matter) Toshiba doesn't provide any of the XP drivers needed to get it to run properly. You could determine all of the various chipsets the system uses and go to each chipsat manufacturer's support site to see if they provide an XP driver to get it working, but I don't guarantee that they have all of the needed drivers. If you do decide to go ahead with this let me know and I'll post the directions for installing XP onto a SATA hard drive that doesn't ahve a floppy drive.
Right now your best choice is to replace the old hard drive and restore the system from your Acronis image. When ALL of the Windows 7 drivers become available you could install it in a dual boot configuration to determine if you prefer it or not. It is both a step up and a step back from Windows Vista. Some people will like it while others won't. Only you will be able to determine which you prefer.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

I have a new mini mac and i want to use my existing external hard drive but it needs to be reformated how do i do this without loosing all my old photos?

i have a new mini mac and i want to use my existing external hard drive but it needs to be reformated how do i do this without loosing all my old photos?

Formatting will erase the drive.
You need to copy the photo's to either your old computer, the Mac Mini or to a new external drive and then decide what to do with your existing external drive.
For example: You could use one External drive for Photo's and one external drive for Time Machine to backup both your Mac Mini and the Photo drive.

How much hard drive do I need on the Macbook Pro?

I am buying a Macbook Pro 13" to use for email, internet, word processing and photo editing (in raw and jpeg). It comes wtih 500 or 750 GB Seriesl ATA hard drive which is way more hard drive than I need. I will keep most of my photos on an external hard drive and in a cloud and retain about a thousand photos on the Macbook's hard drive at a time for viewing and processing. I would like to upgrad to the Solid State hard drive but want to choose the least amount of hard drive that would be sufficient for the applications I would like to run and the realtively small amount of photos I want to store on the Macbook Pro. Do you think this would be sufficient? Is the solid state hard drive so much better than the serieal ata hard drive that it would be a good investment?

The downside of moving a lot of your storage to an external hard drive is that then you need a second external hard drive on which to back the first one up, and you need to remember to actually DO the backups regularly. I greatly prefer to have a large enough internal drive to store all my files, just because it makes backing them all up so much easier (and therefore more likely to be done often).
As for the downside of SSDs, do they need any more downside than costing several times more per GB of storage than hard drives? Particularly when they're still in their early childhood, are still improving by leaps and bounds, and better SSDs will probably cost half or less than half as much per GB a year from now as they do today? There's more than enough downside to discourage me from buying an SSD now. Thanks, but I'll wait for prices to come down, sizes to increase, the limited-write-cycles problem to be addressed on Macs, and SSDs' long-term reliability to be more definitively confirmed. And frankly, I just don't care whether a file takes half a second or three seconds to open. I can afford to wait 20 or 30 seconds a day.

HT1923 what hard drive changes are made when downloading i-tunes 10.6 upgrade

what hard drive changes are made to my computer when downloading the i-Tunes 10.6 upgrade / update?
what registry changes does it make, if any?

Ok, so as far as the hard drive goes, go for the biggeset one you can afford/need. 500 gb, should be plenty big for just about anybody. But as for the speed of the drive.... Yes, a 7200 rpm drive will drain the battery life much quicker than a 4200 rpm drive or even a 5400 rpm drive. Apple has been shipping 4200 rpm drives as a standard for ever practically, and recently made the 5400 rpm the new standard with the 7200 as an option. More important than the physical speed is the buffer size. A nice big buffer will provide quicker access to data and not eat into your battery life. Then there is also the option of an SSD (solid state drive), but those are still crazy expensive.
I've read any Serial ATA drive is compatible with the drop sensor. I upgraded my hard drive with a Seagate, and it works great. Apple generally ships Toshiba drives in their laptops.
replacing a hard drive can be a bit of work. First of all it will void your warranty (But your is obviously expired anyways) It is pretty complicated and takes a lot of patience. iFixit has great step by step instructions. here's a link : http://www.ifixit.com/Device/MacBookPro_15%22_Core_2_Duo_Models_A1226_andA1260
Hope this helps

What hard drive do i need to buy for macbook 2007

Similar Messages

Maybe you are looking for