What hard drives can be installed into a MBP?

I'm looking at options for upgrading the internal hard drive on my MBP, and have noticed that there are 250GB 2.5" drives available (e.g. http://www.skycomp.com.au/productinfo.php?productsid=67390). Can you install any old 2.5" drive into a MBP? If so, how hard is it to do? Are there any common gotchas with trying to image the old drive to the new one, esp. when using BootCamp?
Any help much appreciated. Apologies if this is a noob question.

*"Can you install any old 2.5" drive into a MBP?"*
Yes, as long as it's a SATA and not an IDE/ATA drive.
*"If so, how hard is it to do?"*
Instructions can be found at http://www.ifixit.com
Keep in mind though, that if you do decided to install it yourself you run the risk of voiding the computer's warranty.

Similar Messages

  • What hard drive can I put into my powerbook G4 titanium

    The hard drive just won't boot up no matter what I do.  Even from the repair disk.  What can I put into this thing.  I don't want to buy the wrong thing.
    thanks,
    Jon

    PATA drive, up to 320 Gig.  Look at this OWC link for some candidates.  You can filter on your exact machine to narrow down the selections..

  • Satellite M100-164 - what hard drive can I install?

    Hi,
    I have a Satellite M100-164 ... its a middle-east version of the M100, pretty much identical to the European version as far as I can tell.
    (short model no psma0e)
    I want to install a new hard drive. The spec says it uses a 5400rpm, Serial-ATA hard drive.
    Can I just use any hard drive of that type, or are there other things to watch out for (e.g. drive depth, pin configuration?)
    e.g. could I use this drive:
    "Toshiba MK2555GSX 250GB 2.5-Inch Internal SATA HDD"
    [http://www.amazon.co.uk/Toshiba-MK2555GSX-250GB-2-5-Inch-Internal/dp/B002752SLU]
    ... or should I play it safe and use one that explicity says its for the M100, e.g. this one on Ebay:
    "250Gb Hard Drive Toshiba Satellite L35 L45 M100 M105"
    [http://cgi.ebay.co.uk/250Gb-Hard-Drive-Toshiba-Satellite-L35-L45-M100-M105_W0QQitemZ190276248831QQcmdZViewItemQQptZUK_Co mputing_HardDrives_RL]
    thanks

    Hi!
    On SATA HDDs there are no capacity limits and you have on every HDD the same pin assignment. That means you can use every SATA HDD that you want and also SATA2 HDDs because they are downgrade compaitible so SATA1 standard.
    However, you can buy the cheaper version from Amazon. This HDD should also work well in the notebook.
    I hope I could help you a little bit.
    Bye

  • I want to pgrade to an SSD drive in my Mid 2007 MacBook. What SATA hard drive can I install 2 or 3??

    I want to pgrade to an SSD drive in my Mid 2007 MacBook. What SATA hard drive can I install 2 or 3?? That seems to be just about all I can find out there, so far. Are those drives compatable with this macine?  thx

    SATA II

  • What hard drive can I upgrade with on iMac intel early 2010

    what hard drive can I upgrade with on iMac intel 27 inches early 2010

    You can install any 3'5" SATA hard drive on a Late 2009 iMac. Have a look at OWC > http://eshop.macsales.com/shop/internal_storage/hard_drives_and_SSD
    Note that Late 2009 and later iMacs have got the temperature sensor inside the hard drive. If you install a hard drive without a sensor, fans won't work correctly. Read > http://blog.macsales.com/2751-proprietary-cable-can-put-the-brakes-on-upgrading- late-09-imacs

  • How big a internal hard drive can I install in a G5 Powermac

    Model Name:          Power Mac G5
      Model Identifier:          PowerMac11,2
      Processor Name:          PowerPC G5 (1.0)
      Processor Speed:          2 GHz
      Number Of CPUs:          2
      L2 Cache (per CPU):          1 MB
      Memory:          4.5 GB
      Bus Speed:          1 GHz
      Boot ROM Version:          5.2.7f1
    How big a internal hard drive can I install in a G5 Powermac

    2.1 TB for certain & some 3 TB drives work if Partitioned to less than 2.1 TB but then it must be GUID instead of APM, most important is if it is SATA I 1.5Gb/sec compatible.

  • After installing a new hard drive can I install snow leopard directly from snow leopard disc

    After installing a new hard drive can I install snow leopard directly from snow leopard disc. Or do I have to install previous versions first. iMac 7.1 (2007) 2.8ghz

    You can install directly, assuming the disk is newer than your computer and not designed for a different Mac, but doing so won't install iLife.
    (64305)

  • How large of a hard drive can I install on dual G5, and do I need more RAM?

    I recently had a situation in which my dual-processor 2.0 G5 was completely refurbished by Apple repair-new logic board, both processors, video card, thermistor, all new. Finally it has been working well after a month of trips back and forth from the Apple store. I have two internal hard drives installed on my G5, both 300GB, one for OS applications, and one for audio. I am running out of space on my main hard drive, and so I recently purchased a Maxtor 1TB hard drive, now manufactured by Seagate, from Fry's. After having my G5 refurbished, I was having an issue with my Samsung 930B monitor going into sleep mode when I boot-up from a CD, but other than that G5 was working fine. I removed the main 300GB hard drive from slot #1 and put it into slot #2, from which I had removed my audio hard drive. I installed the Maxtor drive in slot #1 and reformatted it for Mac using my laptop with ATA/USB cables previously purchased for data transfer. This took about 14 hours as I used the "zeros" option. After that I hooked up the internal cables to both drives and tried to boot up from Leopard in order to install it on the Maxtor drive, but again my monitor went into to sleep mode. We went to the Apple store to try to see if there was an issue with the computer, but everything worked fine with their monitors and CD's, as well as my CD. So there is some kind of issue with my monitor, probably software as it works fine when booting up from the main hard drive, and also was fine when I did its self-test function. While at the Apple store, they installed Leopard from their hard drive which took about 30 minutes.
    My problem is this: When I arrived home, I turned on my G5, which had been set to boot from my new Maxtor drive and complete the Leopard setup process, which we had decided to do at home as it would have taken another 20 minutes in the Apple store. The G5 turned on, chimed, I got the Apple screen with the wheel, but then after that my monitor goes into sleep mode. I can hear Leopard's setup intro playing through the speakers, but the screen is in sleep mode. So I reboot holding down the option key so I can boot up from my old (300GB) main hard drive, now in slot #2. This works and the monitor screen does not go to sleep. However, as I am browsing on the web to check for issues concerning this monitor, the G5 freezes, and I get a screen with black bars with writing in them and various technical language across the screen. This happened several times after rebooting. Finally I shut the computer down. I am going to try removing the new hard drive and putting both old ones back in and see if the G5 stops crashing. I think the monitor issue is a separate issue, and I am more concerned with the crashing, as previous to the new hard drive installation the G5 was working fine, monitor fine, other than the issue when booting up from a CD. Do I need more memory? Is the 1TB hard drive too large for my dual-processor 2.0 G5 and overloading it? Would I be better off with a 500GB drive? Would appreciate advice from persons with experience in this area. Thank you.

    I have replaced my 5 year old G5 with a Mac Pro, as the G5 just had too many issues, even after replacing all major components (logic board, both processors, video card, etc.) Once I took out the 1 TB hard drive from my old G5, it stopped having the kernel panic issue. Nonetheless I had been through a lengthy repair process previous to this issue, so I didn't care to trust an older machine any longer, especially since being told by an Apple tech that the "new" parts were really just older parts stockpiled from a central location. Could be new, could be refurbished. Apple was kind enough to credit the money we had spent on the G5 repairs towards the purchase of my Mac Pro.

  • What Hard Drive Can I use?

    Ok stupid question time. I want to get a firewire enclosure and put 3.5 hard drive in it for my mac mini. Can I buy any old hard drive and jam it into the box or do I have to buya hard drive that is specific for the Mac? I mean are hard drives mac or pc specific or are the just hard drives and formatted to the pc or mac when you buy them? I am sorry for the dumb question but I have been a PC user for years and am pretty new to the Mac world (only 1 year so far). Thanks for the reponse.

    Just curious what should I be looking for with
    regards to the enclosure? I mean is the Vantec
    Nextstar 355 the only one I can use? I was hoping to
    find one a little cheaper than $69.
    I'm new to Mac as well. I've only had mine about 2 months. As far as HDD Exclosures, you should be able to find an enclosure for less than $69. A couple things to look out for when buying an enclosure is to look at the drive size capability. I've seen enclosures that at in the $30 price, but some stop at the 200Gb size range, where the ones in the $70 range, will support the larger drives like 500Gb. Now, this isn't always the case, as I have seen some expencive enclosures that don't support beyond 200Gb drives.
    Now, if you decide to buy the enclosure, and drive as seperate pieces, you're drive will most likely not be partitioned, or formatted, as this is normally the case with boxed Western Digital, Maxtor, etc... So you'd need to take care of that with the Drive Utility that's part of your Mac after it's in the enclosure and connected to the Mac.
    As a side note, I was down at my local CompUSA and they had a 160 Gb External LaCie Firewire drive at $139.00. This was a better buy for me, as I didn't need to buy the components, didn't need to put them together, and was less money than buying a 160Gb drive and enclosure. The LaCie drive was formatted FAT32, which I quicly changed to the Mac Journaled File System.
    Timothy N. Couch

  • New Mac Mini Server, two Hard drives, Can I install an older Mac OS on the second drive and switch start up disks to run PowerPc applications?

    New Mac Mini Server, has two Hard drives, could I install an older Mac OS on the second drive and switch start up disks to run PowerPc applications?

    I haven't purchased a Mac Mini at this time and I may not if I can't use it as a non server. I need to update my system I would be better off buying a new Mac with Snow Leopard the last app that will run Rosetta. The Mac Mini Server has a quad 2.0 processor and 4 GB RAM and two internal hard drives and should out perform my dual 1.25 G4. I can run PPC apps on my G4 but it is 8+ years old and seems to be getting noisy. I don't want to tie myself to another old machine. I want a machine that will work with Intel Apps I was hoping that the two hard drives would allow me to boot from the second with Snow Leopard and use Lion on the first drive to be able to keep up to date with all my other universal apps and Mac OS up grades. The application I use the most is my CanvasX app with drawing & vector effects, text & typography, sprite technology, painting, image editing, and multimedia tools are all in this one app but will not be updated to run Intel apps. I am frozen in time because my most valuable Application won't be updated and Apple has cut me off by not supporting PPC in Lion and onward; Apple used to backward support but I guess that they are no longer as user friendly and concerned with a happy user. I have always been a loyal Mac user and I will not migrate to Windows under any circumstance; I hate windows!
    Thanks for your prompt response,
    Dick Deaton

  • What hard drive can put in macbook

    hi i have a old macbook 2.1 ghz core duo and it already had a 500 GB hard drive and 4 GIGs of ram i would just like to know if this is limit for the laptop and if not what the biggest amont of Ram and hard drive can you you put in to it?
    As really want better preformance

    5400 RPM. There are no 7200 RPM drives at that capacity. However, Seagate has a 750 GB drive in the 7200 RPM speed.
    750GB 2.5" Seagate Momentus 7200RPM SATA 9.5mm Notebook HD 16MB Cache
    Or, their hybrid version:
    750GB Seagate Momentus XT 2.5" 7200RPM / Solid State Hybrid Drive. 3yr Warranty

  • T61 Hard Drive can be installed on what other computers?

    What computers brands and models can a T61 Hard Drive be put into.
    My T61 is starting and connecting to the internet, but the monitor is dark. I was hoping that I could take out the HD and pop it into another computer to see and access my files.
    Thanks for your help

    Your drive is unlikely to _boot_ on anything but a T61 or very similar Lenovo laptop.
    You should be able to install it as a 2nd (non-boot) drive on most machines w/a SATA drive interface to retrieve your files.  A SATA-USB or SATA-eSATA external drive adapter is handy for this kind of thing. Either a temporary one, or a more permanent installation.  Something like one of these:
    Rosewill RX-DUS100 2.5" & 3.5" SATA to USB2.0 & eSATA Hard Drive Docking Station
    VANTEC CB-ISATAU2 SATA/IDE to USB 2.0 Adapter
    [edit] Does an external monitor work on your sick T61?  Maybe that would let you access and salvage your files.
    Z
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • What Hard drives can unplug into my Airport Extreme?

    Can I plug a normal flash stick into the AirPort Extreme or do only powered external hard drives work with it.

    Make sure that USB flash drive is formatted in Mac OS Extended (Journaled) or FAT 32 before you plug it into the USB port on the AirPort Extreme.

  • Blank new hard drive can't install OS

    I replaced a hard drive in my 2010 Mac mini. The hard drive was formatted as a boot drive before I installed it. The drive had no operating system or files on it, I just used a formatting that allows it to be a bootable drive. I thought I would be able to boot from the installation DVD and install everything fresh without doing any pre-loading of existing software from my original set up. That was half of the point when installing a new drive, to have a fresh system in addition to going from a 7200rpm hard drive to a SSD.
    When I turn on the computer I get a folder with a question mark. The install CD that came with the Mac mini is rejected no matter what I try. I cannot insert it before starting the computer and I cannot insert it once it is starting or has started without the disc being spit back out. The only keyboard shortcut that does anything is Option which produces the Airport icon and a drop down menu of signals in the area.
    The disc is for OS X 10.6 Snow Leopard. It is the original computer-specific installation disc that came with this Mac mini.
    I could put the original hard drive back in, write off the day as typical unexpected computer horse manure and try not to kill myself.
    I am hoping there is a remedy that advances this situation forward towards a solution.
    Any ideas?

    The only remedy is to get a working optical drive so you can install OS X. The one in the computer has apparently gone south.
    Clean Install of Snow Leopard
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • Losing the will - Bay 2 1TB Hard Drive can't install Vista AT ALL!

    I have a new Mac Pro and installed a Samsung Spinpoint F1 1TB hard drive in bay 2, solely for a Vista install (for editing AVCHD in Sony Vegas) but I cannot under any circumstances, install Vista on any partition, be it the full, halved, any combination at all - you name it, I can't install.
    I get as far as the partition screen in Vista and his is where things slip up - I have had the Boot Camp partition (only on a split, never on the single partition) and it just will not let me install. Not under any circumstance.
    This is appalling, I have been onto Apple who have escelated it to one of their engineers, he did not have a clue. Way to go.
    So, I was wondering if anybody had any ideas or has experienced this?
    BTW, I have not tried to install to the OS hard drive yet - don't really want to mess with it.
    TIA

    There are a number of things you can do, but in every case, you have to delete any FAT partition, create NTFS before you can install. In some cases, a restart from Vista DVD is required before it proceeds.
    In one instance, I had to remove the OS X drive, but that may be why some jump to wrong conclusion about drive bays making a difference - they don't.
    You got it installed so you must have been at least somewhat successful.
    I use Disk Utility to create and format the drive 99% of the time. If you are going to dedicate a drive to Vista, even multiple FAT/NTFS partitions, I would set the partition table (Partition: Options.... in Disk Utility) to Master Boot Record rather than GUID.
    Let Windows do all the updates through multiple reboots before you insert the Leopard DVD to add Apple setup.exe services often called "BootCamp drivers."
    BootCamp Assistant is unnecessary and I don't think well designed even yet for use on Mac Pro UNLESS you need to install Windows on the same drive as OS X, such as you find on iMac/MacBook series.
    Vista DVDs are now available with SP1 already, which is what I would buy today if I was buying Vista.
    say "had" because a couple of days down the line when I tried to boot into Vista, I was met with a black screen and flashing cursor.
    Any hardware changes? installed drivers?
    When you say you looked far and wide... I have been active here and on Mac Pro discussion and Vista issue.
    There are also some good threads on MacRumors:
    http://forums.macrumors.com/forumdisplay.php?f=1

Maybe you are looking for