What has been done in version 4.3.3?
Gentlefolk;
I have been prompted for the iPad 4.3.3 update. Anyone know if this is a good update or one I should pass on? What has been done?
About iOS 4.3.3 Software Update
This update contains changes to the iOS crowd-sourced location database cache including:
Reduces the size of the cache
No longer backs the cache up to iTunes
Deletes the cache entirely when Location Services is turned off
Products compatible with this software update:
• iPhone 4 (GSM model)
• iPhone 3GS
• iPad 2
• iPad
• iPod touch (4th generation)
• iPod touch (3rd generation)
This update is available via iTunes.
Similar Messages
-
From ARD Client, how can I tell what has been done on my machine?
I am in a workgroup that is managed by ARD. I am not an administrator, but I'd like to get an idea of what has been done on my machine by the admin through ARD. It doesn't have to be too specific or real-time, but I'd like to get some idea. For instance, were there reports run on my application usage? Was there software installed? I'm really just fascinated by automation and software used to increase efficiency. I was thinking there would be a way to monitor incoming and outgoing requests or something, but that might not be the answer in this case. So how can I figure out what ARD admin is doing on my machine?
To answer what was asked in the subject of your question... ARD Client will not tell you anything. It is just the doorway.
There may be logs, but those would not be accessible from a non-admin account. -
if you could help that would be awesome
Did you try to set it up as new device, as explained in this article?
How to erase your iOS device and then set it up as a new device or restore it from backups
If this does not work, use iTunes to set it back to factory settings, which would also install the latest software:
Use iTunes to restore your iOS device to factory settings - Apple Support -
Have been advised by my email provider (recently blocked account requiring password reset) that they will only reset the password after a proven anti virus and malware scan has been done on ipad and iphone. Is this necessary and if so what do i use
As KP has pointed out, there actually aren't any anti-virus programs in the App Store. There are a few that allow you to scan e-mail or stuff like that, and a few that provide you with information about malware and new threats for other systems. But none are available that can scan your iOS device for malware, because the security restrictions in iOS do not permit any apps to have that kind of access to anything. Which means that you also cannot be infected with a virus (unless you have jailbroken your device).
If your account got compromised, that had nothing whatsoever to do with your iPad. Someone simply hacked it remotely. Happens all the time. It's really amazing that, in this day and age, e-mail providers are so ignorant of technology and how their own systems get compromised that they would try to require you to run software that does not exist! -
I received this update from Apple, but I have no record of altering anything, in particular telephone numbers, can anyone tell me what has been updated, who updated it, and how was entry made to my account?
Hello,
The following information for your Apple ID was updated on 03/22/2014:
Phone number(s)
If these changes were made in error, please CLICK HERE, to Cancel this changes withing 24hours..
This is an automated message. Please do not reply to this email. If you need additional help, visit Apple Support.
Thanks,
Apple Customer SupportThis is a user to user forum, so no one here can provide an answer. You should contact iTunes Support directly.
Here's how you can do that: http://www.apple.com/support/itunes/contact/ -
What has been your experience upgrading from Mac OS X 10.6.8 ti 10.7 or 10.8?
my story was indeed a horror story
Mavericks is not an upgrade of previous OSes, but rather a port of iOS
If you want your computer to function like an iPad, go for it.
Snow Leopard on the other hand is a full-featured and stable OS - the best of them in my opinion.
Mavericks makes it easier to port Pages and Numbers documents back and forth between your computer and your iPad - but this portability comes at the price of many, many lost features in both programs. Over 100 lost features in Pages. Don't know how many for Numbers, but because of lost functionality you risk losing data (if you used Footers and Headers, Page View, etc.).
It is possible to use the older version of iWork under Mavericks, but it is a real pain as Mavericks keeps trying to default you to the newer versions. Even accidentally opening with the newer version and not saving changes can cause the file identifier to be altered making it no longer open under the older version (I did find a way to force open) Deleting the newer versions from your system results in Mavericks nagging you on a daily basis to reinstall them. There is no option to say No, only the option to postpone for one day.
the OS itself is much less customizable, I found it much harder to use with older eyesight because I couldn't highlight my scroll bars, or change the colour of certain files in a list, etc. Anywhere I went to Preferences I was struck by how few of them there were - less than half as many as Snow Leopard, in some cases less than 25%. Again, I had used those missing Preferences.
Mavericks also takes away many of the abilities of iTunes to sync with your iPad or iPhone and forces you to use iCloud to do much of the synching. If you don't want to use iCloud, or if you have confidentiality issues that prevent you from using it - you are out of luck.
In the end I found Mavericks unusable. The process of reverting back to Snow Leopard required 5 hours with 2 different geniuses at the Apple Store, 2 deep wipes of my computer and fresh install of Snow Leopard. And some loss of settings and data.
If you choose to go for it, then make a bootable backup first. Some sources suggest making 2 backups.
There are people who are happy with Mavericks, but I am not one of them.
Since I had my misadventure they have made some improvements to Mavericks, but not nearly enough of them to tempt me back. For example, you cannot set your old Pages and Numbers documents to 'always open' with the older version of the software ... or rather you can set them to, but Mavericks will immediately revert it back to the new version. -
My laptop has been in the apple store to be fixed more times in the past 2 years then you could imagine. They just replaced a defective wire in it, and hardrive not even a month ago and now the screen just went black and wont turn back on. Also is there a way to see everything that has been done to this laptop through the apple store?
If I were you I would call Apple Customer Relations (800) 767-2775. Tell them exactly what you stated in your post in a polite way. See what they can do for you.
Nickc111209 wrote:
is there a way to see everything that has been done to this laptop through the apple store?
Yes. And also on Apple's repair history website. -
Vendor Payment has been done without doing MIRO Postings
Hi,
In the SAP system, Goods receipt has been done (MIGO) with respect to a Purchase order for the period of March 2009 fiscal year. Now FI user has made the direct payment to the vendor in April period of 2010 fiscal year for the qty. received without doing the Invoicing in the MIRO postings. Now there is a difference in the accounting entries as still the open invoice exists for the Purchase order even though the payment has been made in the SAP system. So, kindly suggest what can be done further to correct the accounting entries.
Thanks & Regards,
PavanHi
Please let me know hich will be the correct solution for the issuein the below given points for the problem stated in the message:
1. Doing the cancellation of Goods receipt documents and then marking the deletion of PO's.
OR
2. Running MR11 - GR/IR Clearence for the PO's for which GR done and IR not done.
OR
3. Doing cancellation of Vendor Payment and then doing MIRO for the PO's for which GR was done earlier.
I think all above are OK, it depends which one is the most acceptable one for your customer, for example if goods has already been receipted physically, then option 1 is not applicable.
I would like to say 3. might be the best way.
Thanks and regards,
Polly
Edited by: Polly Gan on Apr 12, 2010 8:21 AM -
How to find out what has been restored to a database instance?
I'm using RMAN to back up and restore/recover. How to find out what has been restored/recovered to a database instance?
Oracle version is 11gR2 but compatibility is set to 10.
Edited by: 881656 on Aug 28, 2012 1:54 AMselect output
from V$rman_output
order by stamp;
select *
from V$rman_status
order by start_time desc;
Regards
Asif Kabir
Handle: 881656
Status Level: Newbie
Registered: Aug 25, 2011
Total Posts: 52
Total Questions: *30 (30 unresolved)*
-- please close all the answered threads and mark your helpful post as correct/helpful -
Need to find out what has been modified to running-config
Hello,
When I enter the "reload" command, Cisco ASA 5510 asks me
a question: System config has been modified Save? [Y]es/[N]o:
All I did was issuing a few "show" commands before the "reload" command. I definitely need to find out what
has been modified before the reboot
Is there any way to find out what has been modified to the running configuration.
Thanks!If you want to know when changes are made, but don't want to setup TACACS (and you have a syslog server setup), you can have the router syslog all commands entered while in config mode:
devcorert01#conf t
devcorert01(config)#archive
devcorert01(config-archive)#log config
devcorert01(config-archive-log-cfg)#hidekeys
devcorert01(config-archive-log-cfg)#logging enable
devcorert01(config-archive-log-cfg)#notify syslog
Anytime someone enters any command while in config mode, the command will be sent to your syslog server.
Examples:
Jul 21 10:15:41 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:console logged command:do sh run
Jul 21 10:17:33 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:console logged command:interface GigabitEthernet2/2
Jul 21 10:17:38 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:console logged command:shutdown
Jul 21 10:17:42 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:console logged command:no shutdown
Note the "do show run". Even thought that is not a config command per se, it was entered while in config mode. Also notice the user is "console". If it was from a telnet session, you would see
Jul 21 10:17:33 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:unknown user logged command:interface GigabitEthernet2/2
Jul 21 10:17:38 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:unknown user logged command:shutdown
Jul 21 10:17:42 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:unknown user logged command:no shutdown
Mike -
Accessing what has been published - On Delivery Architecture
Hi All,
I was wondering if there is any way of getting access to what has been published on the content delivery machine when a template executes on delivery.
I want to be able to interrogate the latest items, based upon publish date; think of the requirement as "Show latest n" of a certain article. I would want to query n of that article, published date descending and return n to the user.
When I look inside my FLEXFAMILY_C_PUBLISH, there is no data there.
In fact, I cannot see any date in any of the PUB* folders; PUBMESSAGE, PUBSESSION,PUBTARGET etc.
I am testing a JSK --> JSK publish locally. Not sure if that is part of the issue.
Thanks in advance.
JasonCheers Ravi,
I have been trying to implement this article:
http://manifesto.co.uk/working-publish-events-webcenter-sites-part-2/
I can see that on the delivery side, I get the following events:
Publishing event fired for
pubsession: 1374098136922
Publishing task : UNPACKER
Status of the task : SUBTASK_FINISHED
Message associated with the task : Success
Publishing task : CACHEUPDATER
Status of the task : STARTED
Message associated with the task : Importer:CacheUpdate started for pubsession 1374098136922
Publishing event fired for
pubsession: 1374098136922
Publishing task : CACHEUPDATER
Status of the task : DONE
Message associated with the task : Importer finished for pubsession 1374098136922
So, I get three events served to me. What I want to ask is: Are these good stages to hook into and should I be able to get the published assets at these stages?
I ask because theres nothing in the tables, even when running a Publish. Yet my listener fires, telling me the publish is happening. -
Hi on MAC OSX 10.7.4 update on Aperture 3.3.1 has been done, still gget the error message "By opening the databank for the Mediathek „~/Pictures/Aperture Library.aplibrary“ is an error" is anybody out there to help me?
Alex,
did you just upgrade from an Aperture 3.2.x version to Aperture 3.3.1? This error message usually occures after the upgrade to 3.3.1, when Aperture cannont convert the library format to 3.3. format.
I'd try to repair the Aperture Library (Mediathek), before upgrading it. Hold down the option-command key combination (⌥⌘) while double-clicking Aperture. This will bring the "Aperture Library First Aid Tools" panel forward. Select "Rebuild Database" and see, if it will resolve the the problem.
Good luck
Léonie -
In process withdrawling quantity not showing zero when reverse has been don
Hello
I want to know about process order
period is close and reverse has been done in this month in process order not showing withdrawl quantity zero in process order.
Reversal done with MB1A using movement type 262
Regards,
Ram RathodeHi
Is your reversal happened & RM stock came back into system?
what is the status of the order now?
Thanks
Sachin -
im trying to take a head shot and put it on a color background, but you can tell it has been done how do I blend it into background!
Russell Brown's video shows this being done...
http://tv.adobe.com/watch/the-russell-brown-show/masking-basics-in-photoshop-cs5/
Also, sometimes, if you shoot an image with a radically different background than what you end up putting the subject in front of digitally, reflections in hair highlights and shading can make it seem unnatural. In those cases you really have no choice but to alter the subject subtly to make it "blend" better into the scene - e.g., with the Burn and Dodge tools.
People might make more specific suggestions if you'll put up an image (or even part of one) showing what you're working with.
-Noel -
Deliveries for which F8 has been done are appearing in VF04
Dear all,
Deliveries for which proforma invoice F8 has been done , are appearing in VF04. I know that +/- indicator is absent in VTFL. What other ways are there to adress the issue.
Pl. help.
regards.Hi,
The delivery LF where Performa invoice F8 is created is appearing in VF04 i.e. Invoice Due list becasue of Copy Controls.
Copy Controls are maintained From LF to F8 as well as LF to F2 or some other billing document.
For cross verification please delete the copy control between LF to F2 . Please do the testing by creating customized document in the test client.
Revert if any thing is wrong.
Regards
Durga Sana
Maybe you are looking for
-
Time machine disappeared/reappeared with Lion (I've read the other threads)
Hello, I downloaded Lion to my MacBook Pro. I am running OX 10. 7 (Lion). My Airport Utility software is updated and current (5.3.3). What happened is this: After downloading the new 10.7 (Lion), Time Machine was not able to run any more because it c
-
ARC3: RFS network connection lost at host 'stdbhost'
Hi there, having oracle 8.1.7.4 64 bit on Aix 4.3.3 replicating on a twin machine. While archiving many logs within few minutes i'm having this error: ARC3: RFS network connection lost at host 'stdbhost' ARC3: Error 3113 creating standby archivelog f
-
How to create Mobile User Account
Hi all, I have a dumb question but it makes me crazy !!! I'm new in CRM 5.2 and in mobile as weel. My question is : How to create a user acount into my mobile infrastructure ? I've followed the following explanation but I don't find the solution : [h
-
Did the macbook white 2010 MC516LL/have a keyboard problem
did their or not ans which did not have them MC516LL/A ?
-
I have a linksys WRT54G for my wireless router.. The wireless router works great but I want to set up a password to access the network. I went to 192.168.1.1 and setup the security for WEP 64 bits 10 hex digits. When my G4 laptop asks for the WEP pas