What has changed in the Playlist Creation on the Zen Vision:M compared to the older Ze

Hi, I have a Zen Micro for a year now. It works flowlessly and I have have a lot of good time with it. But yes , there ist now the Zen Vision:M (sadly :-)).
I have read that the way to create a playlist on the vision:M is somewhat different compared to the Zen Micro for example. Can somebody explain what has been changed. In the review was said that it is more advances , but it is not as friendly as it it on the older Zens.
And one more thing: is the radio reception on the vision:m really a lot better than on the Micro? ( is was said in the article I read, just can't figure out where it was...) I really anticipated to be able to listen to radio with the micro, but hier in Hamburg (Germany) I can get a relati'vely clear reception of just TWO senders (from time to time). This is the point where the Micro dissapoints (my opinion ofcourse).
Thank you!Message Edited by plam_mk on 02-04-2006 02:38 PM

Hi Wupperbayer,
Danke f?r die Antwort. Ja , die hat mir geholfen eine bessere Vorstellung von dem Player zu kriegen.
Tja, ich habe echt gehofft , dass man auch die option haben w?rde, Lieder zu einem beliebigen Playlist hinzuf?gen zu k?nnen, und nicht nur zu dem, der gerade abgespielt wird. Der Radioempfang, sagst Du also ist besser. das ist f?r mich eigentlich noch wichtiger, da ich gerne ab und zu Radio h?ren will, was mit dem Micro nicht wirklich gelingt.
Ich m?chte dich noch gerne Fragen, ob du die Videofunktion brauchbar findest, ob Du ggf nach einer Konvertierung deine Filme auf dem Player gut abspielen kannst. Wie ist die Qualit'st der abgespilten Filme? Ja, da ich es noch nicht gesehen habe, kann ich es mir nur sehr schwer vorstellen, einen Film auf dem Player in der S-Bahn zu richtig zu geniesen. Findest Du pers?nlich, dass sich die Anschaffung vom Player gelohnt hat?Der Kostet letzt?ndlich ?ber 300 Euro, und ich bin halt nur ein Student, und an Geld komme ich sehr schwer ran (daf?r bin ich aber ein gro?er Fan von Music, Filme und Fotografie :-( )
Ja , ich bedanke mich bei Dir, wei? nicht ob ich etwa zu viel gafragt habe...
kannst ja uch nicht alles beatnworten, oder gar nicht beantworten. Viele Gr?e
Hi guys, I will translate in a concise manner the obove writing. I aksed whether I can take a movie. convert it propely and play it on the player. And that is not all: I just want to get most of the information from the picture as I do it on he PC, read very good quality. I have also hoped, that the possibility to add a song to every playlist, not just the one that is being played, would become a reality. But one very important thing however, is that the radio reception have been improved.

Similar Messages

  • I just replaced my broken iphone with a replacement.  Now when I try to sync my audiobook library i get a warning that all of my music, etc will be deleted.  I can drag and drop but it's a pain in the ***.  What has changed?

    just replaced my broken iphone with a replacement.  Now when I try to sync my audiobook library i get a warning that all of my music, etc will be deleted.  I can drag and drop but it's a pain in the ***.  What has changed?

    Click: Restoring your iTunes Library backup (from an external drive) here >  iTunes: Back up your iTunes library by copying to an external hard drive
    BTW, if you are a resident of the U.S, have iTunes 10.3 or later, and iOS 4.3.3, you can re download your iTunes purchases for free.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • My mac book air no longer supports the audio speakers on my panasonic tv when playing movies? what has changed in the last week for this not to work any more?

    I used to be able to plug my mac book air to my tv via mini dvi to hdmi cable to tv and watch movies.
    The audio no longer projects through the tv? in system preferences, sound, driver for sound output is not supported for my panasonic tv.
    Just a couple weeks ago this was not a problem.  I just plugged in my computer to the tv and it worked.  what has changed?

    Have you tried a PRAM reset?
    http://support.apple.com/kb/HT1379
    Ciao.

  • What has changed in the B1iC for 8.81?

    Hi guys
    Does anyone know what has changed, or is there some documentation floating around, with the B1iC Dashboards in 8.81.
    I had managed to get everything up and running on my laptop running 8.8, I have since upgraded to 8.81 PL02 and the dashboards don't want to run, the services all appear to be running etc.
    I've noticed for example, on the Cockpit tab of the General Settings you dont have the URL input box anymore, surely this has got to somewhere?
    Can someone please point me in the right direction
    Many thanks
    Hayden

    Frank, thanks for the reply and the info.
    However, I'm having trouble getting this resolved.
    SAP Note 1549532 appears to provide more useful information - however it looks like you need a PhD in computer science to actually understand the SAP instructions and and find the data needed even for the temporary workaround.
    Sadly I fear that if you are not a IT professional you will not be able to do this, I will have to wait until SAP release further documentation or the patch they talk about to make this work again so I can demo it.
    Thanks again
    Hayden

  • HT201335 What has changed regarding watching youtube on my apple tv from my iphone and macbook pro in the past month or two?

    In the past month, I have stopped being able to play youtube content to my apple TV from my iphone - I can only get audio to play, and no video.  When I activate mirroring, the video quality is much worse than it ever was before.  Additionally, there is no option to play any content from youtube to my apple tv from my macbook.  What has changed?

    The native Youtube app was removed in IOS 6. You would have had to download the official 3rd party app, which has not been enabled for airplay. This is up to the developer to do.
    The only way to do stream Youtube content from laptop to Apple TV natively is through Airplay mirroring, which requires a recent (2011 or later) model running Mountain Lion. The alternative is going through software, Airparrot.

  • When I upgraded to 10.7.4 I lost the ability to use a lot of my previous software that was intel based. My Adobe suites for example. So for $29 i now have to spend $1000's to get these to work. What has changed with Mountian Lion. I am not rich/

    When I upgraded to 10.7.4 I lost the ability to use a lot of my previous software that was intel based. My Adobe suites for example. So for $29 i now have to spend $1000's to get these to work. What has changed with Mountian Lion. I am not rich?

    The reason your applications do not work in Lion/Mountain Lion is that they were written for the older PowerPC CPU that all Macs used up to 2006.  When Apple made its transition to the Intel CPU, they licensed software that they included in all versions of OS X (from Tiger to Leopard and optionally, Snow Leopard) called Rosetta.
    Rosetta miraculously allows PowerPC applications to work on the Intel processor transparently; you do not know it is even present.
    The problem is that after 6 years of the transition, Apple's license to use the underlying software expired for OS X Lion and all version thereafter (and it is doubtful that the current owner of the software, IBM, would relicense it, even if Apple were inclined to do so).
    So you do not have to accept recriminations from others for previously using Rosetta without even knowing it was present and running!
    So for those of use that need to upgrade to Lion/Mountain Lion, I have offered the option to install Snow Leopard (with Rosetta) into Parallels 7:
                             [click on images to enlarge]
    And now Mountain Lion:
    If you are unable or unwilling to update your inventory of PowerPC software, this solution offers you an alternative for not more than the $29 cost of Snow Leopard and $79 cost of Parallels (cheaper via internet sources).
    Full Snow Leopard installation instructions into Parallels 7 are here:
    http://forums.macrumors.com/showthread.php?t=1365439
    Assistance with the installation process is available on this linked forum.

  • Download helper add-on no longer works after update of firefox, what has changed?

    After I updated Firefox to 18.0.02 the download helper stopped working on 98% of the websites I watch TV programs on. What has changed and will it be returned to its previous condition?
    The website I go to is: http://www.free-tv-video-online.me/internet/

    Are you using an add-on as a download helper?

  • I posted in Mac pro Eplehust and Oslo in early June to change videokart (which has changed six months ago) got my Mac a month by mail, with the terrible damage the body, but the packaging in which he lay was not damaged. I sent him back to change t

    I have posted in Mac pro Eplehust and Oslo in early June to change videokart (which has changed six months ago) got my Mac a month by mail, with the terrible damage the body, but the packaging in which he lay was not damaged. I sent him back to change the computer, 4 weeks, I changed it and checked 2 more weeks. as a result of three days ago, got back, more than half the programs crash, I can not open or closed CDrom, some programs do not come off or stop, and stop responding commands, turn it off only mechanically, not any excuses, I did not get to the store, what should I do?
    My patience is crowded, nerves on edge, I have lost my time with the worst service of my life, the only thing I see its the draw Eplehuset and apple to court.
    my e-mail - [email protected]

    While writing I made a mistake... It is true I could become aware of the Scorpio incompatibility.
    I also tried the same identical procedure with a Seagate one. This disk and the same procedure was performed by some people I know on many MacBookPro Mid-2010 and everything was OK.
    We do not understand why this problenm occurs.
    Furthermore, If I installed the system on the broken HDD (that works, but sometimes it fails so badly and makes the system experience kernel panic) I could boot from it.
    I guess it is because of the **** Apple FIrmware written on the label.
    Is it possible that I cannot manage to boot from my new HDD because it has not a "special" feature on it that makes it compatible with apple??? Why making things so **** difficult my god a closer world like Apple one is impossible to imagine.
    However Shootist007 thanks for your message, but given what I said I do not think is a cable problem.

  • Disk Utility: Does it work or not? What has changed?

    Hello:
    After upgrading just about five hours ago to Leopard, and applying all upgrades and updates as well as security updates, I have noticed that Disk Utility is not th same snappy piece of software it used to be.
    In Tiger, I used to run Disk Utility every time there was an upgrade or update and it took usually from less than a minute to sometimes a couple minutes. This time I get the bar immediately stating a 'less than a minute' operation but it results in something about 10 or more minutes.
    It would be great if anyone from Apple or even someone with Technical information would post why is this, and what has changed with Disk Utility and how can we make sure that new permissions are fixed when the new Disk Utility can't do so. Like in my case I receive the following after the long wait.
    +Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.+
    +Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.+
    +Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.+
    +Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.+
    +Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.+
    +Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.+
    +Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.+
    +Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.+
    +Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.+
    +ACL found but not expected on "Applications".+
    +ACL found but not expected on "Library".+

    On my Mac it normally runs fine and fast. The SUID errors your getting are harmless. See this.
    Apple OS X 10.5: Disk Utility's Repair Disk Permissions reports a permissions issue with ARDAgent
    If they bother you run the Mac OS X 10.5.1 Update again. It got rid of all mine when I did this.

  • Dynamic Fonts loading in CS4 vs CS3. What has changed?!

    Hi there,
    I've had BIG troubles loading dynamic fonts in CS4. Well I had a whole library written in AS3 for CS3 which works just fine. But the whole thing doesn't work anymore in CS4. The textfields are empty although the fonts are loaded and registered via Font.registerFont. So the loading process actually worked. But the text just doesn't appear anymore.
    In CS3 it works, in CS4 id doesn't work, with exactly the same FLA and AS files.
    The Font files were exported with CS3. Maybe there's the problem? There is another font-file I had to export with flex (due to the character limitations in the flash IDE), that actually does work(!)
    So what has changed between CS3 and CS4? There must be some reason why things don't work anymore like they did before.
    If someone is interested in the source... it's quite a lot just to get a font loaded.

    just out of curiosity -- did you update all of the applications?
    elaine

  • Every time I try to download and app to my iPhone, it tells me that I need to change to South African App Store. I live in South Africa and have purchased apps before, what has changed ?

    When purchasing an app on my iPhone, it says I must first change from the US App Store to South Africa, I live in South Africa and have downloaded several apps before without any problem. What has changed ?

    Hi HayCam,
    Sounds like you accidently got changed to another store....
    So, go to Settings>iTunes & App Store, and click on your AppleID at the top. Then click on View account, sign in, and then click on Country/Region, and follow the instructions to change your store to South Africa.
    That should take care of it!
    Cheers,
    GB

  • MacBook won't join networks on startup - what has changed?

    I seem to have posted this in the wrong forum (Tiger rather than Snow Leopard), so on advice from iyacyas I'm reposting it here. Maybe it should be in the MacBook forum, but I will start here:
    I am using my MacBook with the same version of the OS and the same networks as 2 weeks ago, but now I find that when I start up the machine near a known network (a WiFi router permanently connected to the Internet), the WiFi connects but I am not actually on the Internet. If I turn Airport off and on again, or if I renew the DHCP lease in Network Preferences, then I connect to the Internet instantly. This happens on networks in different countries with different levels of security (including one network with no security at all). I can't figure out how to fix it, and I can't figure out what has changed. I have done various Apple updates since installing 10.6.2 but none have claimed to do anything to network connections. Can anyone help me to get back to where I was.
    BTW this problem doesn't seem to occur on my other Macs (one Intel, one PowerPC - tho these don't move around between locations) or my iPod touch.

    Thanks - it took me a long time but eventually I tried a version of this. My MacBook remembers maybe eight networks and I don't know how easily I could re-harvest their passwords (the person who set it usually has to be present to tell me and that's not always the case), so I tried it with just one network, the one which I'm using now and which I set up myself. As it doesn't have a password (I live a long way from the next house and my nearest neighbours are a couple of un-cyber-aware horses), so there was no Keychain entry that I could see for the password. So I just deleted the network from the Airport list, and sure enough when I restarted I got an Internet connection immediately. However when I tried it again this morning, the problem had returned. As before, I can't see what has changed since this worked every time, nor what is the difference between my restart and my turning Airport off and on after the machine boots up.
    Puzzled.

  • What has changed for OLAP Universe in BOXI3.1 SP2

    All,
    I would like to understand what has changed in BOXI3.1 SP2 in comparison with BOXI3.1 base version for OLAP universes.
    We design Universe on top of MSAS 2005 cubes and create webi reports.
    Based on BOXI3.1 SP2 what's new document- the enhancements seem to affect the Universe Designer- providing a developer with more control and options.
    I am interested in learning if the release has any features that improves performance of BO against MSAS cubes.
    Any feedback would be much appreciated.
    Edited by: ramaks on Dec 11, 2009 11:02 PM

    Hi,
    Here is the list of feature we have added in SP2 for OLAP universes:
    <li>Definition and Where editors enabled
    <li>Prompt editor
    <li>MDX dictionary
    <li>New parameters and controls at universe generation time
    <li>Refresh Structure (aka Universe Update or Universe Life Cycle Management)
    <li>Universe SDK enhancements.
    You will find in attachment a PDF that describes the enhancements.
    Regards
    Didier

  • Find what has changed in backups

    How does one find what has changed on the backups. When I click on a backup it shows user finder window. eg: In sys timemachine window/options, I choose not to backup applications. When I click on timemachine in dock it show the last one I did with this setting. click on side bar under user/application and it shows all apps. I would think it would not show anything because I told it not to backup applications.
    Maybe I am just dense...

    1. open Terminal
    2. cd to the directory containing the timestamped backup folders. This will be /Volumes/<yourbackup_drive>/Backups.backupdb/<your_computername>
    3. run the following:
    sudo diff -qrN firstbackupdir secondbackupdir
    e.g.
    sudo diff -qrN 2007-11-20-172936 2007-11-21-111113
    Files 2007-11-20-172936/.Backup.log and 2007-11-21-111113/.Backup.log differ
    Files 2007-11-20-172936/.com.apple.TMCheckpoint and 2007-11-21-111113/.com.apple.TMCheckpoint differ
    Files 2007-11-20-172936/MacBook/Applications/.DS_Store and 2007-11-21-111113/MacBook/Applications/.DS_Store differ
    Files 2007-11-20-172936/MacBook/Applications/OmniGraffle Professional 4.app/Contents/Frameworks/GraffleShapes.framework/GraffleShapes and 2007-11-21-111113/MacBook/Applications/OmniGraffle Professional 4.app/Contents/Frameworks/GraffleShapes.framework/GraffleShapes differ
    Files 2007-11-20-172936/MacBook/Applications/OmniGraffle Professional 4.app/Contents/Frameworks/GraffleShapes.framework/Versions/A/GraffleShapes and 2007-11-21-111113/MacBook/Applications/OmniGraffle Professional 4.app/Contents/Frameworks/GraffleShapes.framework/Versions/A/GraffleShapes differ
    \[etc...\]
    A bit verbose but it does the trick.

  • What has changed in HTTP Client VIs from LV2010 to LV2010 SP1

    Hi all,
    It appears to be a major internal undocumented change for HTTP Client VIs between LV2010 and LV2010 SP1. In LV2010, the client VIs used a dll called "ni_httpClient.dll", but in LV2010 SP1 it is not used any more, probably used pure LabVIEW solution. There was a bug in HTTP PostMultipart, since it couldn't be executed twice, needed to disconnect and connect to get it work again. However, in LV2010 SP1, they have done some changes, since this VI now returns a header stating it using HTTP 1.0 and not HTTP 1.1 as "old" LV2010 did. I've also had problems in LV2010 SP1 that if the server doesn't reply anymore the HTTP Client VIs hangs and I need to kill LabVIEW.exe process. In LV2010, there was a timeout. I've tried to set different time out between 10 and 10000. No difference. I know that there has been a bug in LV2010, since time out was in s and not ms as the controls says. Don't know if they have fixed this in SP1, it seems to be an infinite timeout...
    Anybody has an experience of HTTP Client problems between LV2010 and LV2010 SP1?
    Thanks,
    Mattias

    Hi,
    I found what has changed from LV2010 to LV2010SP1
    * ni_httpClient.dll is now included in the runtime engine (that was why I though they didn't use the ni_httpClient.dll anymore, but that is not the fact. It's not included in the builds anymore though)
    * ni_httpClient.dll is version 1.1.0f14 in Lv2010 and version 1.1.0f0 in LV2010SP1. They have stepped back??? Why?
    In Lv2011, ni_httpClient.dll is version 1.2.0f0. Maybe I can try this and see what happens.
    Thanks,
    Mattias

Maybe you are looking for