What has to be done in order for your play data--Last Played, and Play Count--to be updated from "cloud" play of your music? Thanks

When playing music in the cloud, music on my MacBook's library play data is not updated. Does anyone know how to make that work, or if it is even possible? If it's not possible, why even ha

If you manage the music on your iPod Touch manually the playcount and last played data does not get updated in iTunes. It works that way for all iPod models.
To solve this problem you can do the following:
- Create a playlist in which you add all the songs you want to add to your iPod Touch
- Set your iPod to sync music automatically. On the music tab configure the iPod Touch to only sync the previously created playlist.
- Sync your iPod Touch.
Now you can manage the content of your iPod Touch by managing the contents of the playlist and then sync. And most importantly it will update your playcount and last played data.
Hope this helps,
Marc

Similar Messages

I bought an ipod touch 4 from ebay, and I tried registering it in my name but it says I cannot because its still registered under another user. My question is, what has to be done in order for my ipod to be registered in my account?

I recently bought an ipod touch 4 from ebay, and I tried to register it under my name but appearently its still registered under someone elses; probably the person I bought it from. What can be done so that I can register my ipod touch 4 to my apple id account?

From:
Apple - Product Registration - Welcome
The Apple Product Registration website is closed.
If you’re trying to register an Apple product, chances are it’s already registered. Most Apple products can be registered when you turn them on for the first time and begin the setup process. Service and support for your Apple product are linked to its serial number, so it’s OK if you don’t register it. If you'd like to check the service and support coverage for your Apple mobile device or computer, click here.

Print MULTIPLE sales order for a given date

Hi Gurus,
My requirement is to print sales order for a given date like the one given below.
VL71 - Output from Outbound Deliveries
VL74 - Output from Handling
VF31 - Output from Billing
VOK4- Output Determination: Inventory mgmt.
Is there any T.code for printng multiple sales order instead one-by-one printing using VA02/VA03?
Please hlep me in this regard.
Regards,
Anbu

Hi anbu,
This is very much possible to mass printing for sales orders.
Goto SE38 T.Code.
Enter the program name as "RSNAST00".
Press Execute or F8
Select output application as "V1" which is sales.
Enter your object key here.
Enter your output type.
Select the transaction medium as "1".
Tick "send again".
Press on Execute or "f8".
Regards,
Krishna.

Why has Apple decided that online orders for Macbook Air display and speak VO when first opened from the box? I"m guessing 1%or 2 % of your customers know what it is or want it.

Why has Apple decided that online orders for Macbook Air display and speak VO when first opened from the box? I"m guessing 1%or 2 % of your customers know what it is or want it.

You are not talking to Apple, we are just users like you. Only Apple knows that answer.

HT4759 what hardware is/are used in order for the Apple: iCloud to run?

what hardware is/are used in order for the Apple: iCloud to run?

Apple - iCloud - Learn how to set up iCloud on all your devices.
More Info Here > http://www.apple.com/support/icloud/

What has to be done to the packed fields before submitting to a BDC sessio

What has to be done to the packed fields before submitting to a BDC session.
12) What is a instance ?

Packed field value needs to be moved to a character variable. This character variable you can pass to BDC.
If this answers your question, please close the thread.

What custom cable connector do I order for a DAQCard-6715?

The 776832-01 ...
http://sine.ni.com/nips/cds/view/p/lang/en/nid/12803
... looks like the right connector for connecting to PCMCIA devices like the DAQCard 6715, but hopefully someone from NI can confirm this.
Thanks In Advance - MJD

Hello mdillon,
I believe that the connector that you linked to is made for the larger
sized 68-pin connectors on the PCI E series DAQ boards. The
PCMCIA and PCI M series boards have a smaller connector on them.
If you want to make a custom cable, you would first have to use the standard cable for the DAQCard 6715 as an adaptor for the 68-Pin Custome Cable Connector/Backshell Kit.
Message Edited by E.Lee on 09-14-2005 02:57 PM
Eric
DE For Life!

I recently got the iPhone 4s, but my iPod has a lot of apps with a lot of data on them and don't want to start over. I already synced my iPhone from the computer that had all my apps from my iPod, how do i transfer the data over, the other apps did.

I recently got the iPhone 4s, but my iPod has a lot of apps with a lot of data on them and don't want to start over. I already synced my iPhone from the computer that had all my apps from my iPod, how do i transfer the data over, the other apps did. But some reason the app Clash Of Clans did not. Thank you.

If I wiped my phone I wouldn't have the contacts on my phone to send to my self. I would need to take just the contacts from my back up. I would have to do this through iTunes and I don't see how I can just extract the contacts only from my back up. From what I can figure out it is all or nothing

How to load member for "sales same date last year"?

I need to load a member in Measures named "PriorYrSales" with "Sales" for the same date last year as today's date. Thus, retrieving "PriorYrSales" for 2/10/2002 would return the sales amount for 2/10/2001. Since days roll-up to months, quarters, years, it would be easy to determine how we're doing compared to the same time last year.Data is loaded each day for a date range from the current date and the preceding x days. Substitution variables are available for the beginning and ending date and the same dates for last year.For example: Data is loaded from beginning date of 2/01/2002 through ending date of 2/10/2002.The prior year date variables contain 2/01/2001 and 2/10/2001.The time period dimension is as follows:FY01->Jan2001-->01012001 (Alias: 1/01/2001)-->01022001 (Alias: 1/02/2001)-->all the dates in Jan->Feb2001-->02012001 (Alias: 2/01/2001)-->02022001 (Alias: 2/02/2001)-->all the dates in Febetc.FY02->Jan2002-->01012002 (Alias: 1/01/2002)-->01022002 (Alias: 1/02/2002)-->all the dates in Jan->Feb2002-->02012002 (Alias: 2/01/2002) -->02022002 (Alias: 2/01/2002)-->all the dates in Febetc.Thanks your any and all suggestions.Phil

Perhaps I wasn't clear in the first post. The intent is to easily compare sales for a current date/period to the same date/period last year. Neither Excel nor Analyzer provide a method that I'm aware of to retrieve data as follows:-------------------------------------Period Sales PriorYrSales Diff4/15/2002 1,000 900 100-------------------------------------(900 is sales for 4/15/2001)(100 is the calculated difference.)Nor can I do this:-------------------------------------Period Sales Period Sales Diff4/15/2002 1,000 4/15/2001 900 100-------------------------------------What Excel and Analyzer do allow is:-------------------------------------Period Sales 4/15/2002 1,0004/15/2001 900-------------------------------------I readily acknowledge that the data is redundant but I can't think of another option that will allow Excel and Analyzer to easily retrieve the values for comparison. If the PriorYrSales member can be loaded then the users can compare years, quarters, months and days quite easily.My challenge is knowing how use a calc script to derive prior year dates that correspond to current year dates. Something like:PriorYrSales->04152002 = Sales->04152001I've considered arrays but I've never used them and the documentation is not helpful enough for me.Thanks for your response.Phil

My email address changed and now I cannot remove it from cloud on my iphone 5s in order to back my phone up and download apps now

my email address changed and now I cannot remove it from cloud on my iphone 5s in order to back my phone up and download apps now

If you are trying to change the iCloud ID on yoru phone from an old ID ("email address") to your current ID, and if it is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Hello,i have a problem with my gift card here in switzerland,when i want to redeem the cod says that the code is not good for i tunes....and i buy the gift card from the shop...any idea? thx

Hello,i have a problem with my gift card here in switzerland,when i want to redeem the cod says that the code is not good for i tunes....and i buy the gift card from the shop...any idea? thx

I have one of these http://store.apple.com/us/personalize/itunes?product=M9949
but the credit on it is 30 chf....i try to reddem into itunes and after all the steps i recive a message that says"the serial code is not good...." i don t know why say this....

Auto TECO Orders for which finished date has been reached-Periodic Job

Dear PP GURUS N EXPERTS,
My company want to TECO all the production order automatically for which finished date has been reached or (Finish date is before current date).
On SDN, I have found that it can be carried our by scheduling the variant of PPIO_ENTRY or COHV. and it will be a periodic job.
I want to know that for this which parameters I have to select and where / how I mention that order finish date has been reached. Since it will be a periodic job.
Early response will be highly appreciated.
With thanks,
DSC

Dear DSC
You can use tranaction code CO44, define a variant for periodic job.
Important selection parameters :
Status selection profile : define which kind of production orders you want to set TECO indicator, for example with status CNF or DLV.
Basic finish date : define basic finish date, for example if you want to TECO the production orders whose basic finish date is less than or equal current date, when you create the variant, selection variable can be D ( D: Dynamic date calculation ), name of variable can be "current date"
Actions : please select the indicator "complete Technically".
You can have a try, please let me know the result.
Qiu

What must i do with planned orders for closed item?

Hi alls! My Customer closed some materials, but still there are planned orders for these materials.
I am new in pp. What can I do for delete this orders?
Than'S

Hi Liza,
If it is system generated planned orders i.e. if they are not firmed, then run MRP with planning mode - 3 it will delete all excess planned orders.
But if they are firmed, then you can delete them individually in MD12, or collectively in MD16.
Hope the above answers your query.
If helpful award points
Regards,
Vivek

Orders for On-hold Customers in Pick and Pack

If a Customer is placed on hold after an order is loaded, then the order appears to flow through the pick and pack process until you attempt to add the Delivery, when you are prevented.
Is there any way to prevent orders for Customer who are on-hold from appearing within Pick and Pack Manager? We are wasting time picking orders and getting to the despatch stage only to find out that the Customer is on hold so we can't despatch the goods.

Thanks Gordon, I finally found the time to follow your advice.
In case it is at all useful to anyone else the change I made to Transaction Notification was as follows
IF     @transaction_Type IN (N'A',N'U')
AND     @object_type = 156
BEGIN
     IF EXISTS (
          SELECT          T1.AbsEntry
          FROM          OPKL T1
          INNER JOIN     PKL1 T2
               ON     T1.AbsEntry = T2.AbsEntry
          INNER JOIN     ORDR T3
               ON     T2.OrderEntry = T3.DocEntry
          INNER JOIN     OCRD T4
               ON     T3.CardCode = T4.CardCode
          WHERE          T1.AbsEntry = @list_of_cols_val_tab_del
               AND     T4.frozenFor = 'Y'
       BEGIN
          DECLARE          @DocEntry int
          SELECT          TOP 1 @DocEntry = T3.DocEntry
          FROM          OPKL T1
          INNER JOIN     PKL1 T2
               ON     T1.AbsEntry = T2.AbsEntry
          INNER JOIN     ORDR T3
               ON     T2.OrderEntry = T3.DocEntry
          INNER JOIN     OCRD T4
               ON     T3.CardCode = T4.CardCode
          WHERE          T1.AbsEntry = @list_of_cols_val_tab_del
               AND     T4.frozenFor = 'Y'
          SELECT          @error = 156,
                    @error_message = 'Customer is on hold for order ' + CAST(@DocEntry AS varchar(10)) + ' - picklist cannot be progressed (SP_TransactionNotification)'
       END
END

What's the difference between "login block-for X attempts X within X" and "security authentication failure rate X"?

What's the difference between, just for example, "login block-for 100 attempts 15 within 100" and "security authentication failure rate 3"?
Please ignore the numbers, I need to know what the differences are in commands and what they do, what they affect.

security authentication failure rate number_of_failed_attempts : A global configuration mode command used to specify the maximum number of failed attempts (in the range of 2 to 1024) before introducing a 15-second delay
login block-for 100 attempts 15 within 100 : Block all access after 15 failed login attempts within 100 Secs for the period of 100Secounds (1.40 Minutes).
The Cisco IOS Login Enhancements (Login Block) feature allows users to enhance the security of a router by configuring options to automatically block further login attempts when a possible denial-of-service (DoS) attack is detected.
The login block and login delay options introduced by this feature can be configured for Telnet or SSH virtual connections. By enabling this feature, you can slow down "dictionary attacks" by enforcing a "quiet period" if multiple failed connection attempts are detected, thereby protecting the routing device from a type of denial-of-service attack.

What has to be done in order for your play data--Last Played, and Play Count--to be updated from "cloud" play of your music? Thanks

Similar Messages

Maybe you are looking for