What have my iPhone and iPad both suddenly quit connecting to the internet via wifi?

My phone quit connecting to the internet even when connected to an internet enabled wifi network and then a few days later my iPad has quit. I have taken both to other locations where there are wifi networks available and they will not connect to the internet, though they are connecting to the wifi.

Setting/General/Reset - Reset network settings is a good place to start.

Similar Messages

  • TS3988 I have set up all the iCloud on my iPad and iPhone both are the latest version but they don't seem to sinc with each other does this take some time? I am connected to the Internet via wifi do I need to turn the mobile data to on on both maybe??

    I have set up all the iCloud on my iPad and iPhone both are the latest version but they don't seem to sinc with each other does this take some time? I am connected to the Internet via wifi do I need to turn the mobile data to on on both maybe??

    Welcome to the Apple Community.
    You need to turn the services you want to sync (calendars, contacts etc) on on both devices from settings > iCloud.

  • My ipad has suddenly stopped connecting to the internet. The settings have not been changed. Why is this?

    My ipad has suddenly stopped connecting to the intenet via my home wifi system. The settings have notbeen changed. why is this?

    The first thing to try is to power down your modem and router for about 30 seconds, then repowering by plugging them back in.
    Also, if that doesn't work, on your iPad you can try going into settings/safari/clear history/clear data and cookies.

  • Hi, my iphone 4s is saying im not connected to the internet, my wifi is on and ive tried switching it off and on and nothing, still cant connect. help!

    hi, my iphone 4s is saying im not connected to the internet, my wifi is on and ive tried switching it off and on and nothing, still cant connect. help! it was working perfectly fine earlier today.

    Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

  • HT204023 If my iphone is connected to the internet via wifi will it use my cellular data if I use it as a personal hotspot or will it use the wifi's internet???

    If my iphone is connected to the internet via wifi will it use my cellular data if I use it as a personal hotspot or will it use the wifi's internet???
    The wireless on my laptop brokebut I can still connect to my phone when I plug it in. My iphone is connected to the wifi but is this being transfered onto the laptop or is it using up my data???

    Personal hotspot shares your cellular connection with other devices via cable, bluetooth or WiFi. If you turn on the hotspot, the phone will be disconnected from the WiFi network you are on and share access to the cellular connection. That's what it's for. It's using your data plan if that's what you're trying to do.

  • TS1398 my iphone 5s will not connect to the internet via wifi  since the latest update was performed this morning need help

    unable to connect to the internet via wifi since the latest update

    Hello,
    Try Reseting your decive, check your settings or manually restore your iphone bu putting it in DFU mode and connecting it to iTunes there are many youtube videos on how to do this I hope it works and wish you good luck with it. If It doest call apple care.

  • My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:((((  it happen every time if I restart the modem and/or router

    My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:((((  it happen every time if I restart the modem and/or router.. Any idea how to fix this?

    Hello Rattisate,
    Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro.  I would be concerned about this too.  You can find information on how to troubleshoot this in the following article:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • My Ipad (3rd Gen) has stopped connecting to the internet via Wifi - please help

    Ipad will not connect to home wifi network, first I get the error message "safari could not open the page becasue the server stopped working" then after about 5 minutes, Safari cannot open the page.......because your iPad is not connected to the Internet.
    Wifi is working (able to connect through Laptop) however, iPad, iPhone and my old iPod Touch all show the same error message.
    Have turned iPad Wifi off and back on, nothing, have also tried "forget network", "renew lease" and "reset network settings"I have also completed soft reset of iPad (held down Home Screen button and stand by button) No improvement.
    I have turned wireless router off, I have also disabled security on router to see if this is an issue and still get the same message.
    Untill 48 hours ago never had a problem..........help greatly appreciated

    This happened to me to, it kinda still does.
    Here is a link, mabie this helps you
    :https://discussions.apple.com/thread/5305515

  • IPhone and iPad can no longer connect to iTunes Libary via Remote

    Up until a couple of hours ago, I had no problems controlling iTunes on my MacBook Pro via my iPhone or iPad. Now, on both devices, I get an error saying it can't connect to my Library.
    All devices are connected to the same network. I get the error whether my firewall is on or off. I have tried re-adding the Library. When I do so the relevant device shows up in iTunes and the pairing process SEEMS to work. It tells me that my iPhone can now control my library, but it still can't connect.
    I've tried rebooting the router.
    All devices show the same ip address for the router and all are on the same subnet.
    I've just upgraded iTunes to 10.2.1 and everything on the iPhone and iPad has the latest upgrades.
    Also when I go to the iPod app on my iPhone and go to More -> Shared -> and then my library, I get an error saying "Cannot Connect to Media Libary"
    I've seen this advice, "You must also have the iTunes preference "Look for iPod touch, iPhone and iPad Remotes" enabled. " I cannot find this preference anywhere. It's not something I've ever looked for before so possibly the name of it has changed in a recent iTunes release. Can anyone tell me if I'm looking for the right thing and where I might find it?
    Any other ideas?
    Anyone else with a similar problem that has cropped up recently?

    Hi Everyone, I found a solution to this problem with no "Look for iPod..." option.
    Check "Allow iTunes Audio Control from Speakers"
    Then, RESTART iTunes.
    Heres a picture of what to check off:
    http://www.ilounge.com/assets/images/articles_jdh/itunes-102-2f.png
    Should Work.

  • I have time capsule and I am unable to connect to the internet using static public IP

    I have been using my Time Capsule on my company network for some time.
    Recently I removed the time capsule and connected the TC  Wan port directly to the firewall.  We have got block of static IPs provided to us from our ISP.
    Im confused in filling up the internet tap on the Airport Utility (Lion Version)
    If Im using a static public IP to connect to the internet should I use
    Static, DHCP or PPoe?
    IP Address: is this the IP address of the public IP address given to Us from ISP?
    Subnetmask. ..no problem
    Router Address: what should I type here: IP address of my firewall or my ISP's GateWay IP?
    DNS servrs are clear...
    Please guide me.

    Normally you would just set this up with dhcp to the firewall.. if the firewall is setup correctly it will simply pass you one of the block of static IP addresses.. if it doesn't or get a NAT address you should be able to allocate a static IP to the TC in the firewall to its MAC address.
    I am not sure that the static IP will work if you just type it in.
    If you want to have a go..
    If Im using a static public IP to connect to the internet should I use
    Static, DHCP or PPoe?
    Try static only if dhcp doesn't work because the firewall is not setup.
    IP Address: is this the IP address of the public IP address given to Us from ISP?
    Yes, a free IP from the block.
    Router Address: what should I type here: IP address of my firewall or my ISP's GateWay IP?
    Either should work if the firewall is setup correctly.. otherwise just try ISP gateway.

  • I am unable to connect to the internet via WiFi connection.  My iphone works just fine.  Please advise possible solutions.

    I have an iPad on v5.01.  I am unable to use my wifi network to connect to the internet.  My wife's iPad works fine.  Please advise any potential solutions.

    Have you checked to see if your WiFi router needs to have your iPad's MAC address specifically permitted to use WiFi?  Some WiFi routers have a section in the settings called "Access List", possibly under "Security".
    You can find the MAC address in Settings > General > About > Wi-Fi Address

  • I have windows 7 and my itunes don't connect to the internet

    I have windows 7 I just installed itunes 11.1 and I can't conect to the itune store

    Hello gwolovle,
    Thanks for the question. When encountering iTunes Store connectivity issues, the following resources provide the best solutions:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Thanks,
    Matt M.

  • Why does my iPad 3 fail to connect to the Internet via a MiFi 4510L?

    On Sunday, I ran many tests under the guidance of a senior Verizon engineer to try to determine why the Verizon MiFi4510L mobile hotspot will not connect to the network on a third-generation iPad.
    In the course of our tests, we:
    1. Updated the firmware on the MiFi to the latest Novatel release: 2.23
    2. Tested the MiFi4510L with an iPad2, an iPhone 4 and the latest generation iTouch. In each case, they connected flawlessly to the network and held the connection.
    3. Removed the MiFi4510L from the new iPad(3) and re-installed to make sure the password was correctly set.
    4. Confirmed that the MiFi4510L unit was running the latest encryption software that the Apple iPad in fact supports. The Verizon security setting is WPA2 Personal/PSK (AES).
    5. Reset the MiFi4510L unit.
    6. Simultaneously power re-started the iPad and the MiFi4510L.
    The IPad(3) finds and marks the MiFi4510L in the network queue. It then toggles between connected and not connected every couple of seconds or so in the setting panel. One never encounters a check mark to indicate that there is a solid signal. The MiFi4510L “sees” the iPad3 (confirmed by a bottom dot.) It can handle as many as 5 “dots” simultaneously.
    I have tested the new iPad(3) with my home network, which runs on two bridged Apple Extreme routers connected to a Verizon FiOS base unit. It works fine. 
    So … Everything points to the conclusion that the iPad(3) has broken the connection to the MiFi4510L for some still unknown reason. Verizon is emphatic is its view that their unit is OK. If they are right it would mean that every buyer of the new iPad who attempts to connect wirelessly to the Internet through a MiFi4510L – and there would lots of them -- is going to encounter the same problem that I have encountered.

    ajglass wrote:
    The IPad(3) finds and marks the MiFi4510L in the network queue. It then toggles between connected and not connected every couple of seconds or so in the setting panel. One never encounters a check mark to indicate that there is a solid signal. The MiFi4510L “sees” the iPad3 (confirmed by a bottom dot.) It can handle as many as 5 “dots” simultaneously.
    I have tested the new iPad(3) with my home network, which runs on two bridged Apple Extreme routers connected to a Verizon FiOS base unit. It works fine. 
    So … Everything points to the conclusion that the iPad(3) has broken the connection to the MiFi4510L for some still unknown reason. Verizon is emphatic is its view that their unit is OK. If they are right it would mean that every buyer of the new iPad who attempts to connect wirelessly to the Internet through a MiFi4510L – and there would lots of them -- is going to encounter the same problem that I have encountered.
    I am having the same exact issue.  I just purchased the new ipad yesterday.  I can get the iPad to connect to my home Comcast network.  I can get my iPhone and computer to connect to the MiFi4510L but not the new iPad.  I know it works because my son's works on his MiFi4510L. 
    I've also "forgot the network" on the iPad.  Turned everything off and reinstalled the network after restarting both units.
    I called Verizon which said it's the iPad because I can get to the iPhone and my computer.  I then called Apple who said it's the Mifi because I can get on my home network. 
    Allansch, did you ever find the answer to the problem?  Anyone else have any ideas???? 
    I have an iHeadach!

  • My iPad 2 won't connect to the internet without wifi

    Why can't I connect to the internet

    Need a bit more to go on than that please.
    You do have wifi right? Because the ipad doesn't support wired internet.
    What are you trying to do and are you experiencing any error messages?

  • Cannot connect to the internet via wifi and mobile data

    im having hard time connecting to the internet even if wifi has a very strong signal as indicated on the phone..i tried every solution that i found in the internet but to no avail..i tried restarting my phone..i tried turning the airplane mode on then switching the wifi on but still unsuccessful..even mobile data isnt working..i configured the apn manually applying the recommendations of the network provider but its still offline..how am i gonna connect to the internet..help me pls..thanks

    You might want to repair your phone with PCC
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Maybe you are looking for

  • RAC Migration non ASM to ASM

    Hi I have to perform a migration project of a 4node RAC cluster to new hardware, this RAc cluster has a 2 node DR The new hardware will have the same os as the current one .The catch is that the database is currently using a unix file system and it h

  • How many channels can GB output?

    I am new to GB, coming from the MIDI world. In my setup on another computer I can use up to 112 MIDI channels. I'd like to import my MIDI sequences to GB and play them with Apple loops but from what an Apple salesman at a non-Apple Store told me I ca

  • JFileChooser stop working after last Java update

    I actually program using JDK1.4.2. My programs worked all ok till last Java update. Now, when I try to create an instance of JFileChooser, programs loop infinitely, causing CPU overall. Simple program like this: import javax.swing.*; public class JFC

  • Lis and lo extraction doubt

    hai to every body, i have an doubt on lis and lo extraction In lis extraction we have an information structure(IS).before extraction we all delete the contents of IS.Then by scheduling the v1 or v2 job we update data from database tables to IS by run

  • Send an e-mail with an attachment

    Hi all, The requirement is to send an e-mail with an attachment containing sales cycle information. The mail-ids will be got from the distribution list mentioned on the selection screen. I have to add a select-option with no intervals so that it can