What HT link should i choose 800 or auto?

I have a NF520t-c35 mobo and i'm confused at what HT link settings to have 800 or auto? Looks like auto is safe but what about 800? When i set it to auto CPU-z reads HT link as 1000. I'd appreciate any response. Thank you.

Quote from: Svet on 02-April-10, 15:11:51
leave it to auto
Yeah i think so too. Thanks for the reply.

Similar Messages

What project settings should I choose in PE8 for frame rate of 29.97 if camera source unknown?

Hi, I would like to know what project settings to choose in premiere elements 8 for a frame rate of 29.97, pixel aspect ratio of 1.3333 and 1440x1080? Should I choose HDV, AVCHD or hard disk? I didn't record the footage, so I'm not sure what it was recorded on.

I am definately selecting NTSC - HDV, HDV, 1080I30. I then import the video. It shows in the project media - properties as 29.97 frame rate and in the interpret footage it also shows as 29.97. But when it finishes indexing and starts to conform the video is changes to 25 frame rate.
Please see images below. When importing the video it is at a frame rate of 29.97 until the indexing has finished, then it changes to 25 before conforming video
IMAGE 1. Project settings
IMAGE 2. Indexing image. frame rate at 29.97fps
IMAGE 3. Properties while indexing video - 29.97 fps
IMAGE 4. Interpret footage - still while indexing at 29.97fps
IMAGE 5. Finished indexing changes to 25 fps and starts to conform video?

Ps CS6 Laptop - What Hard Drive should I choose?

I'm going to be ordering a laptop for work very soon. I will need a laptop for travel and my company orders through Dell. Basically here is my build so far (below). I have read so many forums and articles about hard drive setups. But I'm limited to a laptop so I need to prioritize! Please offer some advice on my build so far, best Hard Drive, and any room for improvement, or even where I might have overkill (is that possible? haha). I get one internal hard drive and I want to choose the best one for my application. I will be working with files for print. I believe up to 48" x 64" x 600dpi multiple layers. I'm going to max out RAM to reduce scratch disk necessity. Also, when docked I will have dual 22" monitors.
15.4” Dell Precision M4700 Mobile Workstation
Win 7 Pro, 64 bit
Photoshop CS6
Intel i7 Processor 2.8GHz
NVIDIA Quadro K2000M w 2GB GDDR3
32 GB RAM
Hard Drive Options:
512GB 2.5" (SATA3) Mobility Solid State Drive (very expensive)
256GB 2.5" (SATA3) Mobility Solid State Drive (expensive)
1TB 2.5" 5400rpm Hard Drive
750GB 2.5" 7200rpm Hard Drive
Thoughts? Thanks so much!

Ok here's the problem its either 3 drives, no optical media, RAID ***OR*** 1 drive, no RAID. I can't have 2 drives becuase I get the following "error" when choosing options on the dell site
The No Raid RAID Configuration only allows a maximum of (1) 2.5" hard drive. If Primary Storage selected is 2.5" then Secondary Storage will need to be "NONE".
SO with THESE LIMITATIONS what do you think is my best bet? 3 drives and no media (seems like a bad idea?) or 1 512 ssd? Also my boss thinks I need 2TB of space (which isn't even an option here) and so I think it will take some convincing to explain that a smaller faster more expensive SSD rive could be optimal over the 1TB or 750GB HDDs....
With everyone's advice and suggestions I'm no closer to making a decision. I really need to work within these parameters. And keep in mind the 32 gb ram and other specs and what I'm doing. I'm not doing 3D animations or video production here. I don't even have Illustrator or other software, just PS CS6 (not to say I won't get Illustrator or other graphics software in the future but my job function should not change - just print work)
Thanks

What frame-rate should I choose for iOS devices ?

Hi there,
I have my project set to 60FPS. everything looks smooth and fine when testing on the iphone 4s.
I don't have a 3G to test on yet, should I leave the framerate as 60FPS for 3g or lower it?
I don't really understand how to determine what to set the framerate for best performance or even if it matters.
Just after some clarification about what to set the framerate to.
Thanks

Yes release is same as non-debug
Okay I finally get your question.
The idea is to keep a value for fps that meets your requirement. Using a value higher than this wastes resources. A simple example would be running an application at 60 fps that is an enterprise application which is clearly wasteful. For your scrolling usecase, if your performance requirement is of 40 fps then keep framerate at 40. Now two things can happen either your device will have enough juice to run at 40 fps or it won't have. If it has the juice it will run at 40 fps no issues. But if it does not have enough juice then it won't and cause stutter. In such a case raising the framerate to 60 will serve no purpose, because that relatively slower device could not scroll at 40 fps, no chance of it to scroll at 60 fps. You should not concern yourself to keep different framerates for different devices. Keep the framerate at a value that meets your requirement, if the underlying device can play at that fps it will play, otherwise it will stutter.
To answer your original question, no you will not get smoother scrolling on a lower frame rate.

What size photo should I choose to send in an email.

Hi you 'guys' with all the answers !!! When emailing a photo I am given the option of scaling the image. Do I choose Small (41.3KB), Medium (118 KB), Large (396 KB) or Actual Size. How do I know which option to choose and what is the difference? Does it affect sending time, quality or actual picture size.
MANY THANKS.

There is actually a reason for the three different sizes pf pictures, and it has to do with what you intend to to with the photo after it is sent.
If you are sending a 'snapshot' to a friend to view on another smart phone or small format PC then small is fine. Essentially if it is intended to be viewed once or twice, then choose small. Works great for this use.
If the viewer is going to be use a PC or other large format device, then the medium format if great. It has plenty of pixels to satisfy the display requirements of all but the most sophisticated monitor. This size is also good for printing at the 4x6 or maybe even a 5x7 size.
If you intend to work with the photo with something like Photoshop, or if you intend to have the photo processed professionally (as compared to printing it on a 600 dpi photo printer), use the larger size picture.
I use my iPhone camera, a point and shoot camera and a SLR high end camera a lot. If I am just fooling around, I will use the iPhone or pocket camera. If I am doing some serious photography (weddings, portraits, wildlife, etc.), I use my trusty SLR.
I will admit that the quality of the iPhone camera and my point-and-shoot are blurring with the quality of the SLR, there is still a difference when you blow the picture up to 11x17 or larger. Also, I don't think a bride would accept any explanation for me showing up at her wedding to take photos with only my iPhone ;o)

Satellite L500D: What Win7 version should I choose: 32bit or 64bit?

I have just purchased a Toshiba Satellite L500D and upon starting it up it asks in the product recovery menu to choose either Windows 7 32-bit version or Windows 7 64-bit version.
I am really not sure which option I should be selecting.
Can some please assist??

Hi
Its your choice which version you choose! ;)
But if you have 4GB or more RAM installed I would suggest choosing the 64bit version. Only this version can handle 4GB or more RAM.
If you dont have 4GB RAM you can choose the 32bit version. Some older applications are require 32bit OS.
Have fun with your new notebook! :)

What music format should I choose for a download?

I am new to downloading music and haven't used iTunes. I bought a track at theclassicalshop.net and it is now asking what format I want to download it in: WMA, WAV, AIF. I don't have a clue which one. Then in another part of the screen I have a choice between WMA and MP3.
I have an iMac, iPhone and iPad; no W******.
I would also like some background information on formats. I gather from other questions in the forum that iTunes uses AAC or something but that it is lossy, which doesn't sound good. But I also gather that iTunes can convert from and to other formats. Is there some reliable information on this subject somewheter someone could point me to? I would really appreciate it. I can't find anything on apple.com.

MP3 and AAC (M4a) are both lossy. WAV and AIFF files are non-lossy but are very much larger - impracticably so for most downloading purposes. iTunes does not handle WMA files.
MP3 and AAC quality can be perfectly reasonable as long as they are not compressed too much - purchased items are usually fine. You could download AIFF if you want to be fussy, though it's likely the difference won't be obvious unless you are using a good hifi system.
You could download as AIFF or WAV and convert to MP3 or AAc but there's no point at all in doing that if you can download an MP3 version. Note that if you download an MP3 version there is no point in converting to AIFF - all you will do is make the file size larger, it won't improve the quality at all.
AAC files are slightly better quality than MP3 at the equivalent bitrate, though again the difference is minimal and not likely to be obvious in most playback situations. You could compromise by downloading AIFF and converting to AAC if you want to keep the filesize on your Mac (and more to the point your iPod) down, though the download will be a long one as a result. This post explains how to do the conversion:
https://discussions.apple.com/message/18167954#18167954

What settings/channel should I choose to stop major overlap?

OK, to start, both my printers, iphone 5, macbook air, all accept 802.11n. I currently have a 5th generation airport extreme. For speed, and other reasons, I want all of my devices on the 802.11n frequency. But as you can see from the photo, (I live on campus housing), there are MANY wireless routers, many on the same channel, and it's causing some interference/slower speeds because of it. I need help finding the most optimal channel. MY SSID's are the 1st two in the pic. .maybe someone could help me so my airport only broadcasts "mode" "n" instead of "b/g/n", and "a/n" respectfully. and find the best channel to switch to, as you can see many people have channel have 1, 6, 11. help please! thanks!

i tried your suggestion corvus32, as you can see in the screen shot, but if you look at the second screen shot, it's still showing that I'm transmitting more than the "n" mode. I refreshed the wifi scanner to make sure that it was an accurate reading, but still not broadcasting ONLY "N" mode

What MP4 Compressor settings should I choose for a 10 min 9GB QT video to be uploaded onto a website?

What MP4 settings should I choose for a 10 min 9GB QT video (exported from FCP) to be uploaded onto a website?
They said 'I've been trying to upload the video to our website but our IT contact has told me that it is too big. Could you send the file in MP4 format compressed for web?'
Any thoughts would be really appreciated.
Warm regards
Peter

Hi,
Go to Compressor inspector window>Encoder tab>Click Video: Settings button>In the window that comes up go to Data Rate and change the default 220 Kbits/sec to 150.
The resulting file (if DV, under a minute) will definiteltly be under 2MB and quality good enough. Remember that quality always depends on the source, the greater your original footage looks the better the compression result.

Should I choose struts to learn?

Hello,everyone!
I have learned jsp and servlet...And I want to learn a framework for web project buliding.
"Struts" is the first word to my mind...But I have a little bit exprience in structs,because I made a project with struts action servlet(am I right?...I think action is a branch of servlet )...but I dont think the other part of struts' taglib is good enough.And except that I have no imagnation of struts...Could you give me some advise of what's framework should I choose?
Thank you!

Could you give me some advise of what's
framework should I choose?It depends on if you are doing this for a job, or for your own enrichment. If you are on a team of developers, talk it over with them and make a decision that's best for the group.
If it is for your own, Struts probably comes to mind first since it is so prevalent. I've been using Struts about a month now. I've got mixed feelings on it, but it is a requirement of the project that it be in Struts.
Personally, I plan on learning Struts to the best of my ability, and then choosing another framework for my own enrichment (maybe Spring?), so that I can compare and contrast the two, as well as have an additional tool to use.

Service Dpt. got troubles repairing my mac and give me alternative options.. What option should I choose? Help!

I got a MacBookPro few months ago (October 2011)
                   17-inch, Early 2011
Processor 2.2 GHz Intel Core i7
Memory     4 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6750M 1024 MB
Software   Mac OS X Lion 10.7.4
But for multiple issues I had to take it back. After several repairs, they offered me the three options below as the 17-inch MBP is discontinued(?).. Which one should I choose?
The main reason I want a 17-inch screen is that I am working with graphics and also I move often, so I can't afford carrying an iMac around.
1. Replace the unit with this 15-inch Macbook Pro - this would take approximately 2 weeks to arrive
15-inch MacBook Pro
• Part number: Z0MV
• 2.3GHz Quad-core Intel Core i7, Turbo Boost up to 3.3GHz
• 4GB 1600MHz DDR3 SDRAM - 2x2GB
• 128GB Solid State Drive
• SuperDrive 8x (DVD±R DL/DVD±RW/CD-RW)
• MacBook Pro 15-inch Hi-Res Antiglare Widescreen Display
• Backlit Keyboard (US) & User’s Guide (English)
• Accessory Kit
2. Replace the unit with a 15-inch Macbook Pro Retina - this could take approximately 4-6 weeks
15-inch: 2.3GHz Retina display
2.3GHz quad-core Intel Core i7
Turbo Boost up to 3.3GHz
8GB 1600MHz memory
256GB flash storage1
Intel HD Graphics 4000
NVIDIA GeForce GT 650M with 1GB of GDDR5 memory
Built-in battery (7 hours)2
3. We repair your unit in store as soon as possible.
Can you help me out please?
1) I am afraid that if I choose the third option, I won't be able to fix my MBP in the future in case that there are no spare parts (for example, if I get problems with the screen).
2) I don't understand how equal are the three models based on their prices...

"Another reason that makes me worry, is that I may go live in a country which doesn't have an Apple Store. (but they do have Apple representative suppliers)."
Then what's the worry? Consider how long you intend to own this MBP. Figure 3 years. Buy AppleCare to make sure you're covered.You're obsessing about an issue that may or may not happen. This is just my opinion. The other opinions are, from what I read, based upon what each poster wants, not what you need. You've got to assess your own requirements.

What type of Container Persistence should I choose �?

Hi,
I would like to know... what type of persistence should I choose to manage the entities bean.
At first I choose CMP because it seems to be much easy to understood and maintain, and it seems to work fine with small queries...
Every record of a table of muy RDBMS is represented by CMP Bean... �? is it true �?
What happens if i will like to extract a big table with thousands and thousands records �? does this, affects to the performance of my server �? how can i control...�?
Can I make complex queries with the CMP beans or should i use BMP beans in this case �?
I do not know if the ejb-ql language will result helpful to perform complex queries...
Can you help me �?
Thank you....

Hi,
I would like to know... what type of persistence
should I choose to manage the entities bean.CMP or BMP - those are the two choices.
>
At first I choose CMP because it seems to be much easy
to understood and maintain, and it seems to work fine
with small queries...
Every record of a table of muy RDBMS is represented
by CMP Bean... �? is it true �?True.
>
What happens if i will like to extract a big table
with thousands and thousands records �? does this,
affects to the performance of my server �? how can i
control...�?Yes, indeed, it does affect performance.
One way to handle that is to use a session bean to access all the data at once and then send back a collection of objects. There's a Core J2EE pattern called session facade that can help:
http://java.sun.com/blueprints/corej2eepatterns/Patterns/SessionFacade.html

Mail I inherited an iMac, OS X 20.6.8. The Mail system is corrupted. I cannot close mail formats that opened to be written and sent. I just get an unpleasant noise when I try to close these. Also, I don't know what the outgoing mail link should be.

RE: Mail
I inherited an iMac, OS X 10.6.8. The Mail system is corrupted. I cannot close blank mail formats that opened to be written and sent. I just get an unpleasant noise when I try to close these. Also, I don't know what the outgoing mail link should be.
Please help!
M. Levine

Quit Mail, Trash this file...
Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop for now...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
/Users/YourUserName/Library/Preferences/com.apple.mail.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

I have an early MiniMac with OS X 10.4.11. Can I get a free OS upgrade and which version should I choose? Do I just download and over ride the current OS system or what?

I have an early MiniMac with OS X 10.4.11. Can I get a free OS upgrade and which version should I choose? Do I just download and over ride the current OS system or what?

First what model Mini do you have? That will determine how high y can go.
How to identify Mac mini models
In any event you will have to pay

I'm trying to load the free trial of Illustrator; I get to the Download page, click the big blue box at the top righthand of the screen, but it asks me to choose an application (?) What should I choose to open my new trial with? Thanks.

Giving Illustrator a try with the free trial offer. When I go to download Ai, I am asked to choose an application with which to open it--what should I choose?

Sounds like you maybe trying to download with firefox. In Internet explorer it will automatically switch to the correct application, but with firefox it prompts you instead.
Scroll down the window and find content manager. That will download the installer. Run the installer, after the installer has finished and the manager runs. Open the manager if it is not already, then from there you can select illustrator. It will install it for you.

What HT link should i choose 800 or auto?

Similar Messages

Maybe you are looking for