What i need to filter unwanted sites?

Hi All.
My knowledge is very basic in terms of firewall security but i have learnt so much in CCNA network fundamental, routing protocols and concepts, switching and wireless. Still have to do wan technologies.
What i need to ask from the community if its the right time and right place to ask questions like mine. Here i need to filter social sites (i.e facebook.com, myspace.com ect) including all the torrents and malicious sites. I was advised that i will need Cisco ASA 5505 for this job, but i want to ask the community if is that sufficient enough to have the device only, if not what else can i include.
Thanx in advance folks.

Hello,
I would suggest to go for Cisco Ironport Web Security Appliance which is basically does all your requirements
http://www.cisco.com/en/US/products/ps10164/index.html
Hope this helps
Harish.

Similar Messages

I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have manged to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the pr

I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have managed to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the projects, what I would like is a piece of text or icon that when you roll over it and then click a separate window pops up with additional information in, once finished reading the info you can then click to close the box, any advice on how to do this?

The best way to do what you're asking is with the Composition widget. Start with the Tooltip preset, which, by default shows the info on rollover. You can change the option to show on click, which is what you're after. You can also add the close button or have the info disappear on rollout.
David

When i use Firefox and do a Google search, find what i need and click on the link I keep getting automatically redirected to another search site

When i use Firefox and do a Google search, find what i need and click on the link I keep getting automatically redirected to another search site called http://www.scour.com
Can someone tell me if this is a problem with Google or Mozilla? or both? or neither?

This type of behaviour can be caused by malware. Try running several malware scanners. It is best to run several as each will pick up things that the others miss. Some scanners you can try are:
* [http://www.malwarebytes.org/mbam.php Malwarebytes]
* [http://www.superantispyware.com/ SUPERAntiSpyware]
* [http://www.lavasoft.com/products/ad_aware_free.php Ad-Aware]
* [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx Windows Defender]
* [http://www.safer-networking.org/en/home/index.html Spybot S&D]
This link may help - http://deletemalware.blogspot.com/2010/02/remove-google-redirect-virus.html
If the above malware scanners do not find any malware or can not clear it, you should consider posting in one of these forums for specialized malware removal help:
* http://forums.spybot.info/
* http://www.spywarewarrior.com/index.php
* http://forum.aumha.org/
* http://www.bleepingcomputer.com/forums/
* http://www.spywareinfoforum.com/

Using Get-ADUser but 3.0 needs a filter? What changed?

I'm trying to just do a basic query of AD attributes from a text file of SamAccountNames I have, but I'm upgraded to PowerShell ISE 3.0 and there might be some things new I'm not understanding.
I was just trying to do something simple like this; Get-Content C:\Scripts\userabrivs.txt | ForEach { Get-ADUser -Properties * } | Export-csv C:\scripts\Output\adusers1
but in ISE it always asks for
cmdlet Get-ADUser at command pipeline position 1
Supply values for the following parameters:
(Type !? for Help.)
Filter:
I'm not very good at this so can someone help me understand why it needs a filter when I'm just asking it to use the list of SamAccountNames I have in a text file?

Hi,
You're never telling Get-ADUser which user you want to return. Try this instead:
Get-Content .\userList.txt | ForEach {
Get-ADUser -Identity $_ -Properties *
} | Export-Csv .\userProperties.csv
I highly recommend only returning the properties you need, the wildcard will return more information than most people want to look at.
Don't retire TechNet! -
(Don't give up yet - 12,700+ strong and growing)

What is needed to network 2 computers using Airport card

I know I need an airport card in my eMac, but is there any other cards that have to be in the computer? I want to network my eMac with an iMac using a DSL line. The eMac will be downstairs and the iMac will be upstairs. I'm waiting for delivery from Apple of the iMac. It has everything built in that is needed to network but my eMac doesn't. To make my eMac wireless is all I have to buy is an Airport Card and a Wireless Gateway for the iMac which is the computer connected to the DSL modem and Wireless USB adapter with connects to the eMac? What type of Airport Card do I need to buy for my eMac (model #'s etc.) It is the card that inserts above the super drive in the front of the computer. Is there any software that is needed to install Airport?

I am also doing some configuration changes (we have one Imac and two eMac's)
but one eMac does not have a airport card and is hardwired (ethernet) to the high speed cable modem then a apple airport. One Imac and the Emac with a airport card work fine, it is a bit tricky finding the correct airport card (or airport extreme card if you have a ATI graphics card (use about the mac/system profiler then click on more to see if you have a graphics card (which affects which airport card you need, there are alot of resellers on the net so you should find what you want.
If in doubt there is a free program mactracker which provides data on every mac made (available off off versiontracker.com (free site just register) it will guide
you on the type of card needed. I was quite amazed at the amount of different spec eMac's made in their relativealy short history.
Macwireless.com does sell eMac cards (for two models) but also antenna type
or flash drive appearing USB based wireless connectors that may help.
I found the mactracker program helpful (alot) as alot of web sites provide some vague info and I would hate to se you get stuck with a non returnable card.
The actual card install does not look hard (its done through the cd rom drive door.
I am not sure why we did not get a airport card for ours when we bought it.
Wish I did as it would have saved some $ (maybe) and surf time making sure I find the right one.
We did have a antenna wireless antenna for a "green" Imac (long gone) and it ran on OS9 but it was finicky when we had the airport base station upstairs
and the Imac and antenna in the basement (about 50-75 feet)
Best of luck
Hope this helps, I am not a expert, the serial number on the cd drawer will
nail down the model you have and what you need.
We have been working adding a laser printer and airport express and the two macs with cards work fine but the Emac with no card can not be set up yet. The laser printer will sure save on ink!

I'm trying to connect my MacBook Pro running on OS 10.8.2 to a Linksys EA3500 router and when I go to click on the set up icon I get an "unsupported operating system". Any suggestions on what to do? The Linksys site is useless.

I'm trying to connect my MacBook Pro running on OS 10.8.2 to a Linksys EA3500 router and when I go to click on the set up icon I get an "unsupported operating system". Any suggestions on what to do? The Linksys site is useless. Do I need some kind of upgrade?

Don't use the CD software its not necessary.
Infact put it in the trash.
Your router will have an IP address in the range 192.168.1.1
Connect your router to your Mac via Ethernet cable (They usually supply one with the router and don't worry which end goes where the Mac LAN socket is bi-directional)
Also connect your router to your telephone line.
Now open your Web browser Safari . Type in the IP address above and a Javascript control panel will launch
Enter the default password and username (They are on a label on the router )
Your now have the ability to set up your router.
Your will need the password and user name supplied to you by your ISP at a minimum.
Enter these and most modern routers automatically configure the basic networking setting.
You now need to go to the security setting and set this as WPA2 Personal (NOT Enterprise) or WPA2 with AES and TKIP which ever it refers to and create a pass-phase. WRITE it down
You should be online.
Now remove the cable and connect to the Wifi and enter that passphase.

My late 2009 iMac is running slow, particularly on Mail, more so since I upgraded to Yosemite. I have run an Etrecheck but it doesn't mean too much to me. If anyone can point me to what I need to do I'll be very grateful.

My late 2009 iMac is running slow, particularly on Mail, more so since I upgraded to Yosemite. I have run an Etrecheck but it doesn't mean too much to me. If anyone can point me to what I need to do I'll be very grateful.
Etrecheck says:
Problem description:
Imac late 2009 running slow
EtreCheck version: 2.2 (132)
Report generated 5/3/15, 4:33 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
 iMac (21.5-inch, Late 2009) (Technical Specifications)
 iMac - model: iMac10,1
 1 3.06 GHz Intel Core 2 Duo CPU: 2-core
 4 GB RAM Upgradeable
 BANK 0/DIMM0
 Empty
 BANK 1/DIMM0
 Empty
 BANK 0/DIMM1
 2 GB DDR3 1067 MHz ok
 BANK 1/DIMM1
 2 GB DDR3 1067 MHz ok
 Bluetooth: Old - Handoff/Airdrop2 not supported
 Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
 NVIDIA GeForce 9400 - VRAM: 256 MB
 iMac 1920 x 1080
System Software: ℹ️
 OS X 10.10.3 (14D136) - Time since boot: 5:5:56
Disk Information: ℹ️
 ST3500418ASQ disk0 : (500.11 GB)
 EFI (disk0s1) <not mounted> : 210 MB
 Macintosh HD (disk0s2) / : 499.25 GB (308.35 GB free)
 Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
 HL-DT-ST DVDRW GA11N
USB Information: ℹ️
 Apple Inc. Built-in iSight
 Western Digital My Book 111A 1 TB
 disk1s1 (disk1s1) <not mounted> : 32 KB
 My Book (disk1s3) /Volumes/My Book : 1.00 TB (226.58 GB free)
 Apple Internal Memory Card Reader
 Apple, Inc. Keyboard Hub
 Apple, Inc Apple Keyboard
 Apple Computer, Inc. IR Receiver
 Apple Inc. BRCM2046 Hub
 Apple Inc. Bluetooth USB Host Controller
Configuration files: ℹ️
 /etc/hosts - Count: 30
Gatekeeper: ℹ️
 Mac App Store and identified developers
Kernel Extensions: ℹ️
 /Applications/Toast 10 Titanium/Toast Titanium.app
 [not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
 [not loaded] com.roxio.TDIXController (1.7) [Click for support]
 /Library/Application Support/LogMeIn/drivers
 [loaded] com.logmein.driver.LogMeInSoundDriver (4.1.48f99) [Click for support]
 /System/Library/Extensions
 [not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMControl (3.0.13) [Click for support]
 [not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMData (3.0.13) [Click for support]
 [not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.8) [Click for support]
 [not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.8) [Click for support]
 [not loaded] com.novamedia.driver.IceraUSB_MSD_Bypass (1.3.0) [Click for support]
 [not loaded] com.novatelwireless.driver.3G (3.0.13) [Click for support]
 [not loaded] com.novatelwireless.driver.DisableAutoInstall (3.0.13) [Click for support]
 [not loaded] com.option.driver.Option72 (2.15.0) [Click for support]
 [not loaded] com.option.driver.OptionHS (3.26.0) [Click for support]
 [not loaded] com.option.driver.OptionMSD (1.21.0) [Click for support]
 [not loaded] com.option.driver.OptionQC (1.11.0) [Click for support]
 [not loaded] com.pctools.iantivirus.kfs (1.0.1) [Click for support]
 [not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.39) [Click for support]
 [not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.45) [Click for support]
 [not loaded] com.vodafone.driver (3.0.9) [Click for support]
 [not loaded] com.zte.driver.cdc_ecm_qmi (1.0.1) [Click for support]
 [not loaded] com.zte.driver.cdc_usb_bus (1.0.1) [Click for support]
 [not loaded] de.novamedia.driver.NMSmartplugSCSIDevice (1.0.1) [Click for support]
 [not loaded] de.novamedia.oem.vodafone.vtp.huawei.cdc (0.0.2) [Click for support]
 /System/Library/Extensions/NMHuaweiPhonesVTPCDC.kext/Contents/Resources
 [not loaded] de.novamedia.driver.NMUSBCDCACMData.VTP (3.2.6) [Click for support]
 /System/Library/Extensions/NovatelWireless3G.kext/Contents/Plugins
 [not loaded] com.novatelwireless.driver.3GData (3.0.13) [Click for support]
 /System/Library/Extensions/Vodafone.kext/Contents/Plugins
 [not loaded] com.vodafone.driver.Data (3.0.9) [Click for support]
 /Volumes/My Book/Extras/WD +TURBO Installer.app
 [not loaded] com.wdc.driver.1394HP (1.0.9) [Click for support]
 [not loaded] com.wdc.driver.USBHP (1.0.11) [Click for support]
Startup Items: ℹ️
 AdobeVersionCueCS2: Path: /Library/StartupItems/AdobeVersionCueCS2
 Qmaster: Path: /Library/StartupItems/Qmaster
 VirtualPCOSServices: Path: /Library/StartupItems/VirtualPCOSServices
 Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
 [killed] com.apple.CallHistoryPluginHelper.plist
 [killed] com.apple.CallHistorySyncHelper.plist
 [killed] com.apple.cloudphotosd.plist
 [killed] com.apple.coreservices.appleid.authentication.plist
 [killed] com.apple.EscrowSecurityAlert.plist
 [killed] com.apple.icloud.fmfd.plist
 [killed] com.apple.Maps.pushdaemon.plist
 [killed] com.apple.photolibraryd.plist
 [killed] com.apple.security.cloudkeychainproxy.plist
 [killed] com.apple.telephonyutilities.callservicesd.plist
 10 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
 [killed] com.apple.awdd.plist
 [killed] com.apple.ctkd.plist
 [killed] com.apple.icloud.findmydeviced.plist
 [killed] com.apple.ifdreader.plist
 [failed] com.apple.mtrecorder.plist
 [killed] com.apple.nehelper.plist
 [killed] com.apple.periodic-daily.plist
 [killed] com.apple.softwareupdated.plist
 [killed] com.apple.wdhelper.plist
 8 processes killed due to memory pressure
Launch Agents: ℹ️
 [not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
 [loaded] com.adobe.CS4ServiceManager.plist [Click for support]
 [loaded] com.adobe.CS5ServiceManager.plist [Click for support]
 [failed] com.logmein.LMILaunchAgentFixer.plist [Click for support] [Click for details]
 [running] com.logmein.logmeingui.plist [Click for support]
 [running] com.logmein.logmeinguiagent.plist [Click for support]
 [not loaded] com.logmein.logmeinguiagentatlogin.plist [Click for support]
 [running] de.novamedia.VodafoneDeviceObserver.plist [Click for support]
Launch Daemons: ℹ️
 [loaded] com.adobe.fpsaud.plist [Click for support]
 [loaded] com.adobe.SwitchBoard.plist [Click for support]
 [loaded] com.adobe.versioncueCS3.plist [Click for support]
 [loaded] com.adobe.versioncueCS4.plist [Click for support]
 [failed] com.apple.spirecorder.plist
 [loaded] com.bombich.ccc.plist [Click for support]
 [running] com.logmein.logmeinserver.plist [Click for support]
 [loaded] com.logmein.raupdate.plist [Click for support]
 [loaded] com.microsoft.office.licensing.helper.plist [Click for support]
 [loaded] jp.co.canon.MasterInstaller.plist [Click for support]
User Launch Agents: ℹ️
 [loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
 [loaded] com.adobe.ARM.[...].plist [Click for support]
 [loaded] com.adobe.ARM.[...].plist [Click for support]
 [loaded] com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
 iTunesHelper Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
 Mail Application (/Applications/Mail.app)
 Dropbox Application (/Applications/Dropbox.app)
 AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
 iAntiVirus Application Hidden (/Applications/iAntiVirus/iAntiVirus.app)
Internet Plug-ins: ℹ️
 LogMeInSafari64: Version: 1.0.730 [Click for support]
 Unity Web Player: Version: UnityPlayer version 3.5.3f3 - SDK 10.6 [Click for support]
 Default Browser: Version: 600 - SDK 10.10
 AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
 FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
 LogMeIn: Version: 1.0.730 [Click for support]
 Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
 LogMeInSafari32: Version: 1.0.730 [Click for support]
 QuickTime Plugin: Version: 7.7.3
 iPhotoPhotocast: Version: 7.0
 AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
 SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
 EPPEX Plugin: Version: 10.0 [Click for support]
 JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Audio Plug-ins: ℹ️
 DVCPROHDAudio: Version: 1.2
3rd Party Preference Panes: ℹ️
 Adobe Version Cue CS2 [Click for support]
 Adobe Version Cue CS3 [Click for support]
 Adobe Version Cue CS4 [Click for support]
 Déjà Vu [Click for support]
 Flash Player [Click for support]
 Growl [Click for support]
 SixtyFourSwitcher [Click for support]
Time Machine: ℹ️
 Auto backup: YES
 Volumes being backed up:
 Macintosh HD: Disk size: 499.25 GB Disk used: 190.89 GB
 Destinations:
 My Book [Local]
 Total size: 1.00 TB
 Total number of backups: 13
 Oldest backup: 2015-04-21 19:59:59 +0000
 Last backup: 2015-05-02 19:49:37 +0000
 Size of backup disk: Adequate
 Backup size 1.00 TB > (Disk used 190.89 GB X 3)
Top Processes by CPU: ℹ️
 12% iavd
 5% iAntiVirus
 5% WindowServer
 5% diskimages-helper
 1% mdworker(5)
Top Processes by Memory: ℹ️
 537 MB kernel_task
 266 MB Google Chrome Helper(4)
 111 MB Google Chrome
 74 MB ocspd
 74 MB WindowServer
Virtual Memory Information: ℹ️
 1.45 GB Free RAM
 2.55 GB Used RAM
 59 MB Swap Used
Diagnostics Information: ℹ️
 May 3, 2015, 11:26:23 AM /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-05-03-112623_[ redacted].cpu_resource.diag [Click for details]
 May 3, 2015, 11:22:17 AM Self test - passed

Thanks for all the replies.
I've now installed the ad blocker, thrown away the unwanted files, and thrown away a copy of Firefox that Adware said had a problematic extension.
Things are better, but still slow.
Activity Monitor shows that with just Mail, Chrome and Excel running, 2.9GB of my 4GB RAM is used. Opening InDesign (always slow) increase that to 3.2GB. But the graph stays green.
Console shows several potential problems but I don't know if any are significant. In any case I will call my Mac store tomorrow to ask their advice about RAM.
04/05/2015 18:52:05.309 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3383189 oid:3383189 ino:3383189 fsEvents:1 /Users/leopard/Library/Mail/V2/[email protected]/INBOX.mbox/AB2DA797-EBE4-453E-82BD-8CE588E5D59D/Data/9/6/6/Attachments/669999/5 -- /Users/leopard/Library/Mail/V2/[email protected]/INBOX.mbox/AB2DA797-EBE4-453E-82BD-8CE588E5D59D/Data/9/6/6/Attachments/669999/5
04/05/2015 18:52:05.309 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3375445 oid:3375445 ino:3375445 fsEvents:1 /Users/leopard/Library/Mail/V2/[email protected]/INBOX.mbox/AB2DA797-EBE4-453E-82BD-8CE588E5D59D/Data/9/6/6/Messages -- /Users/leopard/Library/Mail/V2/[email protected]/INBOX.mbox/AB2DA797-EBE4-453E-82BD-8CE588E5D59D/Data/9/6/6/Messages
04/05/2015 18:52:10.564 com.apple.backupd-helper[66]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
04/05/2015 18:52:11.090 com.apple.backupd-helper[66]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
04/05/2015 18:52:12.727 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:52:13.021 Mail[309]: XOAUTH2 requires user
04/05/2015 18:52:13.022 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:52:14.284 helpd[296]: Cannot find executable for CFBundle 0x7fb412caabe0 </Library/Documentation/Help/iWorkFunctionsHelp.help> (not loaded)
04/05/2015 18:52:15.085 helpd[296]: Cannot find executable for CFBundle 0x7fb412d1f540 </Library/Documentation/Help/X422MFPHelp.help> (not loaded)
04/05/2015 18:52:17.455 helpd[296]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 1. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
04/05/2015 18:52:17.456 helpd[296]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 1. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
04/05/2015 18:52:21.737 helpd[296]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
04/05/2015 18:52:21.738 helpd[296]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
04/05/2015 18:52:23.292 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 18:52:31.811 AddressBookManager[428]: Validate metadata timed out, cancelling
04/05/2015 18:52:33.395 accountsd[262]: AIDA Notification plugin running
04/05/2015 18:52:33.396 accountsd[262]: Enter ShareKitAccountEnabler - didChangeWithType - type=2 for account [email protected] (A9323757-5224-408D-AE23-0CB83451E046).
04/05/2015 18:52:33.467 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 18:52:33.573 accountsd[262]: AIDA Notification plugin running
04/05/2015 18:52:33.574 accountsd[262]: Enter ShareKitAccountEnabler - didChangeWithType - type=2 for account [email protected] (A9323757-5224-408D-AE23-0CB83451E046).
04/05/2015 18:52:33.922 accountsd[262]: AIDA Notification plugin running
04/05/2015 18:52:33.923 accountsd[262]: Enter ShareKitAccountEnabler - didChangeWithType - type=2 for account [email protected] (D9A0E166-5A9D-4D1B-B82F-E4CA68F064F3).
04/05/2015 18:52:34.068 accountsd[262]: AIDA Notification plugin running
04/05/2015 18:52:34.068 accountsd[262]: Enter ShareKitAccountEnabler - didChangeWithType - type=2 for account [email protected] (D9A0E166-5A9D-4D1B-B82F-E4CA68F064F3).
04/05/2015 18:52:34.354 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 18:52:35.161 icbaccountsd[430]: Connection error while checking Apple Internalness. Error: Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.CrashReporterSupportHelper was invalidated.) UserInfo=0x7fe8584355d0 {NSDebugDescription=The connection to service named com.apple.CrashReporterSupportHelper was invalidated.}
04/05/2015 18:52:35.597 helpd[296]: Could not find access page in directory /Applications/Carbon Copy Cloner/Carbon Copy Cloner.app/Contents/Resources/Help
04/05/2015 18:52:35.598 helpd[296]: Could not find access page in directory /Applications/Carbon Copy Cloner/Carbon Copy Cloner.app/Contents/Resources/Help
04/05/2015 18:52:35.612 helpd[296]: Could not find access page in directory /Applications/Final Cut Pro Studio/Final Cut Pro.app/Contents/Resources/English.lproj/Final Cut Pro Help
04/05/2015 18:52:35.613 helpd[296]: Could not find access page in directory /Applications/Final Cut Pro Studio/Final Cut Pro.app/Contents/Resources/English.lproj/Final Cut Pro Help
04/05/2015 18:52:37.542 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3111641 oid:3111641 ino:3111641 fsEvents:1 /Users/leopard/Library/Mail/V2/[email protected]@imap.gmail.com -- /Users/leopard/Library/Mail/V2/[email protected]@imap.gmail.com
04/05/2015 18:52:37.542 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3078032 oid:3078032 ino:3078032 fsEvents:1 /Users/leopard/Library/Mail/V2/[email protected] -- /Users/leopard/Library/Mail/V2/[email protected]
04/05/2015 18:52:37.542 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3096791 oid:3096791 ino:3096791 fsEvents:1 /Users/leopard/Library/Mail/V2/[email protected]/[Google Mail].mbox/Spam.mbox -- /Users/leopard/Library/Mail/V2/[email protected]/[Google Mail].mbox/Spam.mbox
04/05/2015 18:52:37.542 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3112877 oid:3112877 ino:3112877 fsEvents:1 /Users/leopard/Library/Mail/V2/[email protected]@imap.gmail.com -- /Users/leopard/Library/Mail/V2/[email protected]@imap.gmail.com
04/05/2015 18:52:37.542 mds[55]: (DiskStore.Error:1417) Unexpected file dev:16777225 storeDev:16777218 mode:41ed hint:3105498 oid:3105498 ino:3105498 fsEvents:1 /Users/leopard/Library/Mail/V2/Mailboxes -- /Users/leopard/Library/Mail/V2/Mailboxes
04/05/2015 18:52:39.465 sandboxd[328]: ([430]) icbaccountsd(430) deny mach-lookup com.apple.CrashReporterSupportHelper
04/05/2015 18:52:42.205 com.apple.backupd[433]: Starting automatic backup
04/05/2015 18:52:43.308 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 18:52:50.022 com.apple.backupd[433]: Backing up to /dev/disk1s3: /Volumes/My Book/Backups.backupdb
04/05/2015 18:53:40.588 mapspushd[322]: 2015-05-04 18:53:40.588, 322, 42c4fc20, [MapsAnnouncements]: server returned error: 404 for URL http://gspe21.ls.apple.com/config/announcements?hardware=iMac10,1&lang=en&os=osx &os_build=14D136&os_version=10.10.3
04/05/2015 18:53:40.589 mapspushd[322]: 2015-05-04 18:53:40.588, 322, 42c4fc20, [MapsAnnouncements]: Failed to load announcements document: Error Domain=GEOErrorDomain Code=-601 "The operation couldn’t be completed. (GEOErrorDomain error -601.)" UserInfo=0x7fba42c4deb0 {NSErrorFailingURLStringKey=http://gspe21.ls.apple.com/config/announcements?hardware=iMac10,1&lang=en&os=osx &os_build=14D136&os_version=10.10.3, HTTP Status Code=404}
04/05/2015 18:53:40.989 com.apple.xpc.launchd[1]: (com.apple.quicklook[440]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
04/05/2015 18:53:41.159 nbagent[439]: XPC Activity invoked with state=0
04/05/2015 18:53:41.160 nbagent[439]: XPC Activity invoked with state=2
04/05/2015 18:53:41.329 storeaccountd[317]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff9a8580770> connection from pid 439 with interface <AccountServiceInterface: 0x7ff9a8598880> (PID 439)
04/05/2015 18:53:41.739 periodic-wrapper[441]: Running daily periodic task.
04/05/2015 18:53:43.613 storeaccountd[317]: ADI: {
 "Accept-Ranges" = bytes;
 "Cache-Control" = "max-age=14400";
 Connection = "Keep-Alive";
 "Content-Encoding" = gzip;
 "Content-Language" = "en-us";
 "Content-Length" = 793;
 "Content-Type" = "application/x-apple-plist";
 Date = "Mon, 04 May 2015 17:53:43 GMT";
 Etag = "\"e20-5071070ddab80\"";
 Expires = "Mon, 04 May 2015 21:53:43 GMT";
 "Keep-Alive" = "timeout=15, max=281";
 "Last-Modified" = "Tue, 04 Nov 2014 23:01:18 GMT";
 Server = Apache;
04/05/2015 18:53:44.006 sandboxd[328]: ([447]) nbstated(447) deny ipc-posix-shm-read-data com.apple.AppleDatabaseChanged
04/05/2015 18:53:58.000 kernel[0]: hfs: mounted Recovery HD on device disk0s3
04/05/2015 18:53:58.472 mdworker[366]: (ImportBailout.Error:1325) Asked to exit for Diskarb
04/05/2015 18:53:58.474 mdworker[435]: (ImportBailout.Error:1325) Asked to exit for Diskarb
04/05/2015 18:53:58.476 mdworker[436]: (ImportBailout.Error:1325) Asked to exit for Diskarb
04/05/2015 18:53:58.476 mdworker[437]: (ImportBailout.Error:1325) Asked to exit for Diskarb
04/05/2015 18:53:58.478 CoreServicesUIAgent[359]: unexpected message <OS_xpc_error: <error: 0x7fff76be0c60> { count = 1, contents =
"XPCErrorDescription" => <string: 0x7fff76be0f70> { length = 18, contents = "Connection invalid" }
}>
04/05/2015 18:53:58.478 mdworker[438]: (ImportBailout.Error:1325) Asked to exit for Diskarb
04/05/2015 18:53:58.558 fseventsd[42]: Logging disabled completely for device:1: /Volumes/Recovery HD
04/05/2015 18:53:58.565 mds[55]: (Volume.Normal:2464) volume:0x7f96c413b000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Recovery HD
04/05/2015 18:53:58.000 kernel[0]: hfs: unmount initiated on Recovery HD on device disk0s3
04/05/2015 18:56:38.724 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:56:39.031 Mail[309]: XOAUTH2 requires user
04/05/2015 18:56:39.031 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:56:40.704 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:56:40.977 Mail[309]: XOAUTH2 requires user
04/05/2015 18:56:40.977 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:56:43.160 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:56:43.428 Mail[309]: XOAUTH2 requires user
04/05/2015 18:56:43.428 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:57:00.920 WindowServer[154]: CGXDisplayDidWakeNotification [729933074334]: posting kCGSDisplayDidWake
04/05/2015 18:57:00.920 WindowServer[154]: handle_will_sleep_auth_and_shield_windows: Deferring.
04/05/2015 18:57:01.086 identityservicesd[287]: <IMMacNotificationCenterManager: 0x7fd52247b130>: notification observer: com.apple.iChat notification: __CFNotification 0x7fd522414040 {name = _NSDoNotDisturbDisabledNotification}
04/05/2015 18:57:01.235 identityservicesd[287]: <IMMacNotificationCenterManager: 0x7fd52247b130>: NC Disabled: NO
04/05/2015 18:57:01.241 identityservicesd[287]: <IMMacNotificationCenterManager: 0x7fd52247b130>: DND Enabled: NO
04/05/2015 18:57:01.242 identityservicesd[287]: <IMMacNotificationCenterManager: 0x7fd52247b130>: Updating enabled: YES (Topics: (
04/05/2015 18:57:06.630 com.apple.backupd[433]: Will copy (547 KB) from Macintosh HD
04/05/2015 18:57:06.720 com.apple.backupd[433]: Found 14392 files (112.99 GB) needing backup
04/05/2015 18:57:06.728 com.apple.backupd[433]: 136.19 GB required (including padding), 118.1 GB available
04/05/2015 18:57:09.840 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:57:10.119 Mail[309]: XOAUTH2 requires user
04/05/2015 18:57:10.119 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:57:12.387 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:57:12.668 Mail[309]: XOAUTH2 requires user
04/05/2015 18:57:12.669 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:57:14.340 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:57:14.619 Mail[309]: XOAUTH2 requires user
04/05/2015 18:57:14.619 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:57:14.620 com.apple.backupd[433]: Deleted backup /Volumes/My Book/Backups.backupdb/Paul Breeden’s imac (2)/2015-05-02-204937 containing 782.8 MB; 118.88 GB now available, 136.19 GB required
04/05/2015 18:57:22.106 com.apple.backupd[433]: Deleted backup /Volumes/My Book/Backups.backupdb/Paul Breeden’s imac (2)/2015-05-03-181125 containing 31.6 MB; 118.92 GB now available, 136.19 GB required
04/05/2015 18:57:22.108 com.apple.backupd[433]: Removed 2 expired backups so far, more space is needed - deleting oldest backups to make room
04/05/2015 18:57:22.281 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 18:57:22.562 Mail[309]: XOAUTH2 requires user
04/05/2015 18:57:22.562 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
04/05/2015 18:57:47.959 com.apple.backupd[433]: Deleted backup /Volumes/My Book/Backups.backupdb/Paul Breeden’s imac (2)/2015-04-25-125849 containing 2.94 GB; 121.86 GB now available, 136.19 GB required
04/05/2015 18:57:47.960 com.apple.backupd[433]: Removed 3 expired backups so far, more space is needed - deleting oldest backups to make room
04/05/2015 18:58:01.552 com.apple.backupd[433]: Deleted backup /Volumes/My Book/Backups.backupdb/Paul Breeden’s imac (2)/2015-04-26-110446 containing 6.31 GB; 128.17 GB now available, 136.19 GB required
04/05/2015 18:58:01.554 com.apple.backupd[433]: Removed 4 expired backups so far, more space is needed - deleting oldest backups to make room
04/05/2015 18:58:30.290 com.apple.backupd[433]: Deleted backup /Volumes/My Book/Backups.backupdb/Paul Breeden’s imac (2)/2015-04-27-095120 containing 110.88 GB; 239.05 GB now available, 136.19 GB required
04/05/2015 18:58:30.290 com.apple.backupd[433]: Deleted 5 backups containing 120.95 GB total; 239.05 GB now available, 136.19 GB required
04/05/2015 18:58:30.290 com.apple.backupd[433]: Backup date range was shortened: oldest backup is now Apr 28, 2015
04/05/2015 18:59:01.076 com.apple.xpc.launchd[1]: (com.apple.quicklook[533]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
04/05/2015 18:59:09.015 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 18:59:10.846 nsurlstoraged[308]: purgeEntireFileSystemStore - failed to rename the current cache dir /Users/leopard/Library/Containers/com.apple.mail/Data/Library/Caches/com.apple. mail/fsCachedData to new cache dir /var/folders/wv/x9z7l4911p33dv8jyv6nby6m0000gn/T/fsCachedData_remove. Errno=18
04/05/2015 18:59:14.837 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 18:59:51.249 spindump[412]: Saved spin report for System Preferences version 14.0 (14.0) to /Library/Logs/DiagnosticReports/System Preferences_2015-05-04-185951_Paul-Breedens-imac-5.spin
04/05/2015 19:00:05.000 kernel[0]: process WindowServer[154] caught causing excessive wakeups. Observed wakeups rate (per sec): 157; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 66094
04/05/2015 19:00:05.871 com.apple.xpc.launchd[1]: (com.apple.ReportCrash.Root[544]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.ReportCrash.DirectoryService
04/05/2015 19:00:05.875 SubmitDiagInfo[340]: Couldn't load config file from on-disk location. Falling back to default location. Reason: Won't serialize in _readDictionaryFromJSONData due to nil object
04/05/2015 19:00:11.473 spindump[412]: Saved wakeups_resource.diag report for WindowServer version ??? (???) to /Library/Logs/DiagnosticReports/WindowServer_2015-05-04-190011_Paul-Breedens-im ac-5.wakeups_resource.diag
04/05/2015 19:00:56.197 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
04/05/2015 19:00:56.530 iconservicesd[59]: Failed to move temp file /Library/Caches/com.apple.iconservices.store/B9FF2D6E-5D0C-1218-402C-B706F28B0A 68.isdata.tmp to /Library/Caches/com.apple.iconservices.store/B9FF2D6E-5D0C-1218-402C-B706F28B0A 68.isdata with error: Error Domain=NSCocoaErrorDomain Code=516 "“B9FF2D6E-5D0C-1218-402C-B706F28B0A68.isdata.tmp” couldn’t be moved to “com.apple.iconservices.store” because an item with the same name already exists." UserInfo=0x7fb949c13070 {NSSourceFilePathErrorKey=/Library/Caches/com.apple.iconservices.store/B9FF2D6E -5D0C-1218-402C-B706F28B0A68.isdata.tmp, NSUserStringVariant=(
 Move
), NSDestinationFilePath=/Library/Caches/com.apple.iconservices.store/B9FF2D6E-5D0 C-1218-402C-B706F28B0A68.isdata, NSFilePath=/Library/Caches/com.apple.iconservices.store/B9FF2D6E-5D0C-1218-402C -B706F28B0A68.isdata.tmp, NSUnderlyingError=0x7fb949c11ba0 "The operation couldn’t be completed. File exists"}
04/05/2015 19:00:57.204 QuickLookSatellite[545]: Failed to obtain sandbox extension for path=/Users/leopard/Library/Caches/com.apple.quicklook.satellite. Errno:1
04/05/2015 19:00:57.211 QuickLookSatellite[545]: Failed to obtain sandbox extension for path=/Users/leopard/Library/Caches/com.apple.quicklook.satellite. Errno:1
04/05/2015 19:00:57.796 QuickLookSatellite[545]: CGSConnectionByID: 0 is not a valid connection ID.
04/05/2015 19:00:57.796 QuickLookSatellite[545]: Invalid Connection ID 0
04/05/2015 19:01:02.753 sandboxd[328]: ([545]) QuickLookSatelli(545) deny file-issue-extension /Users/leopard/Library/Caches/com.apple.quicklook.satellite
04/05/2015 19:01:02.824 sandboxd[328]: ([545]) QuickLookSatelli(545) deny mach-lookup com.apple.nsurlstorage-cache
04/05/2015 19:01:02.837 sandboxd[328]: ([545]) QuickLookSatelli(545) deny file-issue-extension /Users/leopard/Library/Caches/com.apple.quicklook.satellite
04/05/2015 19:01:02.896 sandboxd[328]: ([545]) QuickLookSatelli(545) deny mach-lookup com.apple.nsurlstorage-cache
04/05/2015 19:01:08.015 com.apple.xpc.launchd[1]: (com.apple.quicklook.satellite.7940DB53-496F-47D2-87E2-C3EE3CBF1E27[545]) Service exited due to signal: Killed: 9
04/05/2015 19:01:19.128 apsd[75]: Illegal subject name missing 'courier.push.apple.com' (2.5.4.3): ({
 label = "2.5.4.6";
 "localized label" = "2.5.4.6";
 type = string;
 value = US;
 label = "2.5.4.8";
 "localized label" = "2.5.4.8";
 type = string;
 value = California;
 label = "2.5.4.7";
 "localized label" = "2.5.4.7";
 type = string;
 value = Cupertino;
 label = "2.5.4.10";
 "localized label" = "2.5.4.10";
 type = string;
 value = "Apple Inc.";
 label = "2.5.4.3";
 "localized label" = "2.5.4.3";
 type = string;
 value = "courier.sandbox.push.apple.com";
04/05/2015 19:01:24.087 Adobe InDesign CS5[550]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.3 instead of 10.10.3. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
Call location:
04/05/2015 19:01:24.087 Adobe InDesign CS5[550]: 0 CarbonCore 0x93ff9291 ___Gestalt_SystemVersion_block_invoke + 135
04/05/2015 19:01:24.087 Adobe InDesign CS5[550]: 1 libdispatch.dylib 0x9a9460b5 dispatch_once_f + 251
04/05/2015 19:01:24.087 Adobe InDesign CS5[550]: 2 libdispatch.dylib 0x9a9470d8 dispatch_once + 31
04/05/2015 19:01:24.088 Adobe InDesign CS5[550]: 3 CarbonCore 0x93f7269d _Gestalt_SystemVersion + 1050
04/05/2015 19:01:24.088 Adobe InDesign CS5[550]: 4 CarbonCore 0x93f717c0 Gestalt + 150
04/05/2015 19:01:24.088 Adobe InDesign CS5[550]: 5 AdobeAFL 0x016ebfae _ZN5adobe3afl12MacFileUtils13AFileToFSSpecERKNS0_5AFileER6FSSpec + 5254
04/05/2015 19:01:24.088 Adobe InDesign CS5[550]: 6 ??? 0x8feb70b3 0x0 + 2414571699
04/05/2015 19:01:28.908 Mail[309]: {"status":"400","schemes":"Bearer","scope":"https://mail.google.com/"}
04/05/2015 19:01:28.952 Adobe InDesign CS5[550]: The function ‘CGSFlushWindow’ is obsolete and will be removed in an upcoming update. Unfortunately, this application, or a library it uses, is using this obsolete function, and is thereby contributing to an overall degradation of system performance. Please use `CGSFlushWindowContentRegion' instead.
04/05/2015 19:01:29.229 Mail[309]: XOAUTH2 requires user
04/05/2015 19:01:29.229 Mail[309]: Failed to start the SASL connection
SASL(-1): generic failure: XOAUTH2 requires user
Hope this isn't too much ... thanks again for everyone's input.

Help need to switch Muse site to BC on a allready hosted plan

Hi, i also posted on BC forum...
I have a client that was in a hurry to have his emails accounts before the entire website.
So i went on and bought the email marketing plan (cos he will also need to do email campains) an pointed his domain everything is working fine, at this moment he has his accounts the domain is live.
The site would be just a small 7-10 pages not to complicated.
Has a graphic designer (who has venture into Business catalyst cos it had all the solutions i needed, well that's what the promotional videos said anyway) I made a site in Muse.
First i did a temporary page thats says "comming soon", and then i made the entire site, all the design and menu but with blank pages cos the client didnt have all the content yet (and still dont have). I uploaded that site to a sub directory so he could see the evolution.
He approved the design, yay!
At the end of the process, he told me he needed to have full control with the editor. (style, images, bulleted list, need to put downloadable document like pdf etc.) i told him that he could only modify what was allready there with the Muse in Browser editing (that he saw when i made the pitch using another site) he was impress with the way it worked.
so i told him i would have to remake "template".
I thought of using a BC template, and modify the looks to adapt to my client image, Of course, use a responsive theme so he could make the change at one place only. (cos in Muse you need to make the changes on the 3 layouts).
Now, i created a new temporary site using one of the new responsive template available.
How can i import that new site onto his live domain? In other words, how can a switch from a theme made in Muse, to a BC template?
cant i just delete everything in the root folder, and upload the entire new site via ftp?
please help me find the solution. i am a bit in a panic here
hope you could understand my lousy English.
Sincerely,
i.d.

This would need to be transparent for m'y client...
Y
Envoyé de mon iPhone
Le 2014-04-20 à 15:29, Sanjit_Das <[email protected]> a écrit :
Re: help need to switch Muse site to BC on a allready hosted plan
created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
Thanks for additional details.
Unfortunately we cannot change site template of a live site in BC , but as a workaround Create a site from BC using the template you wish to use then publish the site from Muse to the site created from BC and transfer the contents stored from live site to trial site. Ater final transition is done , you can delete the already paid site and make live the new trial site which includes new site template.
Thanks,
Sanjit
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6314730#6314730
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6314730#6314730
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6314730#6314730. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How do I stop Firefox from opening unwanted sites or (inescapable) dialogs

My Firefox, as soon as I open a web page opens either (1) an overlying dialog typically flashing saying I am the 1000000th person or my computer is slow or buy this or (2) another unwanted site in another tab typically trying to sell something. Cases of type (2) are annoying but at least the tab can be deleted but cases of type (1) prevent me from using Firefox at all because the dialog does not have an exit button so I have to stop Firefox to get rid of it. This problem only happens with Firefox - IE never has these problems. I have scanned for malware using 3 different programs and I have tried deleting Firefox and re-installing it (keeping my profile) but the problem is still there. If I knew what the process was I could at least delete the process.
I love my Firefox - please help!

You can check for recently installed suspicious or unknown extensions.
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Do a malware check with several malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Why SharePoint 2013 Hybrid need SAN certificates and what SAN needs ?

I've read this article of technet, but I couldn't undarstand requied values of SubjectAltname.
https://technet.microsoft.com/en-us/library/b291ea58-cfda-48ec-92d7-5180cb7e9469(v=office.15)#AboutSecureChannel
For example, if I build following servers, what SAN needs ?
It is happy to also tell me why.
[ServerNames]
AD DS Server:DS01
AD FS Server:FS01
Web Application Proxy Server:PRX01
SharePoint Server(WFE):WFE01
SharePoint Server(APL):APL01
SQL Server:DB01
[AD DS Domain Name]
contoso.local
(Please be assumed that above all servers join this domain)
[Site collection strategy]
using a host-named site collection
[Primary web application URL]
https://sps.contoso.com
Thanks.

Hi,
From your description, my understanding is that you have some doubts about SAN.
If you have a SAN, you can leverage it to make SharePoint
a little easier to manage and to tweak SharePoint's performance. From a management standpoint, SANs make it easy to adjust the size and number of SharePoint's hard disks. What you could refer to this blog:
http://windowsitpro.com/sharepoint/best-practices-implementing-sharepoint-san. You could find what SAN needs from part “Some
SAN Basics” in this blog.
These articles may help you understand SAN:
https://social.technet.microsoft.com/Forums/office/en-US/ea4791f6-7ec6-4625-a685-53570ea7c126/moving-sharepoint-2010-database-files-to-san-storage?forum=sharepointadminprevious
http://blogs.technet.com/b/saantil/archive/2013/02/12/san-certificates-and-sharepoint.aspx
http://sp-vinod.blogspot.com/2013/03/using-wildcard-certificate-for.html
Best Regard
Vincent Han
TechNet Community Support

What widget is used for this Site-of-the-Day?

My Muse website is for my design business, and I need to show several pages of design samples (covers, logos, tech art, etc.). I think a slideshow widget will work best, but I have problems with the built-in ones (another forum entry probably). I like this presentation from an Adobe Muse Site-of-the-Day (http://du2design.com), and like that the thumbnails "fade" back while the selection is in the front. I can't find any widget that does this; the thumbnails disappear completely. Can you tell me what widget was used here, or how one was modified? Thanks. Here is a screenshot of the effect.
(not sure how to add an image here)
file://localhost/Users/jbaumgartner/Desktop/sample.tiff

Anshul,
Thanks for the help. I changed the widget I had to your suggested one, and I think it's what I need. However, I still have problems with it which I don't seem be able to resolve. Most of the elements of the widget I can access and will be able to change (color, size, position, etc), but there are a couple of things I don't see options to solve.
1. I "Placed" 20 cover samples into the widget, and they loaded OK and show in the Assets window. None of them are in the thumbnails, only the various gray tints. How can anyone select a sample or even see the samples that are presented? I can find no way to make the thumbnails reflect the samples.
2. As I said, I placed 20 samples. The thumbnail container loaded all 20 items (tints), but the container just extends to the right outside the site dimensions in a single row. I don't see anyway to make the container multi-rows and stay within the boundaries of the site. This is how the example was presented, 15 samples with 3 rows of 5.
3. My site has a static menu area in the upper left of the page for navigating the site, a master item. In design mode, the page has the widget placed to the right of this area, but in Preview mode (and also browser mode), the slideshow samples appear to the left of the position and overlap the menu area. I don't see any way of fixing this. Changing the position of the target area in the container further right makes no difference, it still Previews to the left of Design position and overlaps the menu.
I think this widget may work for my needs, but not if I can't resolve these issues listed above. I'd appreciate any help with this. Thanks,
John B

Is Captivate what I need?

So far my journey into E-Learning has been to use PowerPoint to create PowerPoint Show's (ppsx) adding questions along the way to test understanding. I have not yet had the need to publish the content on our Intranet as it sits on our central server available to all. This though is a natural progression as I will need to offer both the ability to attend classroom style training along with the flexibility of self led learning.
My real question if I understand the ability & limitations of Adobe Presenter is whether I should be looking at Captivate instead of Presenter - or possibly both! My biggest and urgent need is to be able to create self led learning content on IT Systems such as SAP and other company specific IT systems.
I believe that I cannot 'video' screen movements in real time in Presenter but can in Captivate, am I right in this? Your thoughts on Presenter, Captivate or a better platform to achieve what I need would be gratefully received!

Presenter comes with a bundled app called Adobe Video Creator which allows you to capture video of screens on your computer as well as a talking head of you via your web cam at the same time.
Personally I feel that if all you are trying to do is demonstrate the software tasks and not require interactivity of the learner then this little tool is the way to go. You can see some videos that I have created about using Adobe Captivate on my website at www.infosemantics.com.au All of these videos were captured with Adobe Video Creator. It's far quicker to create video tutorials using this tool than either Captivate's Video Demo feature or even Camtasia.

I am looking to start developing apps for the iTunes Store, but I have no previous experience. What is the best way for me to start on this? As in which programs and materials must I need and what I need to know. Thanks!

I am looking to start developing apps for the iTunes Store, but I have no previous experience. What is the best way for me to start on this? As in which programs and materials must I need and what I need to know. Thanks!

You will need a Mac, with OS X 10.6+ on it, to be able to develop iOS apps.
There is some info on these pages :
developer site : https://developer.apple.com
developing for iOS 7 : https://developer.apple.com/ios7/
developer support : https://developer.apple.com/support/
developer forums : https://devforums.apple.com/index.jspa (you will need to be a registered developer to access them)

I need to create another site in dreamweaver and Publish it to

I make a dreamweaver site with mx 2004, well now I need to
create another site in dreamweaver and Publish it to the same site
as prior but in a NEW Directory , what to do ?

> Yes,what to insert at manage site > edit >
advanced > remote info > Host
> directory ?
Try nothing at first. Connect to the remote site. Tell us
what folder
names you see there.
> I try upload [with: ftp host:ftp://www.polis-land.com
& Host
> directory:/dialup/ =thenewfolder]but shows error [when
press test at
> advanced >
> remote info] :
That's wrong. Try this -
Remote Host - www.polis-land.com
Host directory - <blank>
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"123polis123" <[email protected]> wrote in
message
news:fl0uco$qpb$[email protected]..
> Yes,what to insert at manage site > edit >
advanced > remote info > Host
> directory ?
> to manage site > edit > advanced > remote info
> ftp host ?
>
> I try upload [with: ftp host:ftp://www.polis-land.com
& Host
> directory:/dialup/ =thenewfolder]but shows error [when
press test at
> advanced >
> remote info] :
>
> An FTP error occured - cannot make connection to host .
The remote host
> cannot
> be found.
> ???
>

Need to filter the out put of iw38 reprort

hello Experts,
i have requirement like need to filter the out put of iw38 report and after that again i need to filter that output by using department and client code and oreder .ned to show out put with 3 push buttons .
dertails:
selection screen fields:
region
customer code
oreder
date range
from these 4 fields i need to pass two(order and date range)   fields to iw38 report and then what ever output i am getting again that should filter by customer code and region which are there in my program
, need to display the out put with 3 push buttons .
plz suggest me with appraoach and sample code .
Note : i am using using submit and return export memory but its directly showing iw38 output and not coming back.

Hi ananta,
The function module LIST_FROM_MEMORY loads the list from the ABAP Memory to an internal table of the row type ABAPLIST.
The function module WRITE_LIST inserts the content of an internal table of the row type ABAPLIST in the current list.
The function module DISPLAY_LIST displays the content of an internal table of the row type ABAPLIST in a separate list screen.
check the below program..
REPORT Z642_TEST2.
DATA list_tab TYPE TABLE OF abaplist.
SUBMIT riaufk20 EXPORTING LIST TO MEMORY
                                AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject = list_tab
EXCEPTIONS
    not_found = 1
    OTHERS     = 2.
IF sy-subrc = 0.
CALL FUNCTION 'WRITE_LIST'
    TABLES
      listobject = list_tab.
ENDIF.
write: ' This is calling program', sy-repid.
Edited by: Rammohan Nagam on Apr 8, 2009 4:05 PM

What i need to filter unwanted sites?

Similar Messages

Maybe you are looking for