What i need to write when i buy with VISA - ( country - ? AAO? or .... ) in Kazakhstan ????

Well, then your question is a different one: "What do I need to make a web application with ERP data".
In NetWeaver everything is contained that you need technology wise, but no business applications (almost, there is a grey zone coming from the ABAP world).
If you want to access also business data there are two ways:
1. You can access existing R/3 environments from there via RFC and BAPI
2. You will have to wait for mySAP ERP to run it directly on NetWeaver 04
Regards,
Benny

Similar Messages

What is security code meaning when I buy a app

What is security code meaning when I buy a app

If the card is valid and you are typing the correct code, I can't see why it would not be valid. Have you have any issues at all with previous iTunes or App Store purchases?

What is needed to use iPhone 5 musicdock with iPhone 4S and getting iPhone 4S battery charged. Any adapter yet?

What is needed to use iPhone 5 musicdock with iPhone 4S and getting iPhone 4S battery charged. Any adapter yet?

Not by Apple but see this
SANDBERG 440-45 Adaptor 30 Pin to Lightning Connector
Try Amazon in your Country

Charge of extra 1% when I buy with my credit card ( itunes.mx in MXN )

Charge of extra 1% when I buy with my credit card ( itunes.mx in MXN ) if itunes receipt is $ 360 MXN, why the charge is $ 363.59?

However my bank called me and said that Apple charged me 4 times the amount of 1 dollar. At the end I still can't use the iTunes store, and I have 4 dollars down
Note that the $4 is not really a charge but a hold used to verify the card.
It will be released back to your account.

HT3702 when i purchase with visa card it tell me please contact itunes support to complete this transaction

when i purchase with visa card it tell me please contact itunes support to complete this transaction please help me

Many people are having this same problem. I myself was in touch with iTunes for over a week as well as with my bank (Capital One in this case). For Some reason iTunes has put your debit/credit cards into a "fraud mode". According to my bank representative people have been calling in for about 2 weeks about this, so you and I are not alone at all about this. For me I was able to buy anything as long as it was under $10.00, but anything above gave me the errors you are having. You need to contact your debit/credit card customer service numbers and first make sure that there is no "block" or "cap" on them for iTunes. Then ask them why it is being declined. They may ask you to verrify the city and or state which the iTunes store billing you is in, TELL THEM "CALIFORNIA". Then once you have done everything with the bank you need to contact iTunes Store which is only possible with email (or so Apple has told me), and have them reset the billing and and address information for your account. They will email you back saying that in 30 min...blah blah blah... Basically once they have responded log off from the iTunes store on every single apple device you have: iPhone, iPad, Apple TV, iTunes on your computers, all of them! Then log back in through your COMPUTER and enter all of your information again. This should sove your problem completely. It worked for me.... Good Luck!

Play sound in specified duration and desired file when reading data with VISA functions ?

Hi.
I read data with VISA read function and then I use functions like multiple for showing data on Chart. every thing is OK.
now I want play a specified sound (like a 3s song in my desired folder) when signal amplitude cross over from specified value. then after desired time, it will be wait for new cross over from specified value and this procedure repeat again until I stop the program.
Data comes from MCU and it doesn't stop when system play sound and when system play sound, incoming data for this part (play sound) will be ignore them until specified expired.
I use this VI for reading data and mentioned part which is sound part is empty and I don't know what I must done ?
altougth I use another while loop for sound apart because I want save CPU time.
Thanks.
Solved!
Go to Solution.

I would recommend making the data type of the notifier a cluster that contains a path and a numeric (double). The path tells the player which file to play. The numeric is the duration.
Now for a slightly complicated, but really neat, way to stop your second loop. Do not use a second notifier. Instead, send the normal notification but use Not A Path for the path in the cluster. Your second loop can do a check for the Not A Path and stop when that is recieved.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

What I need to write plug-in for Acrobat Reader ?

Hi There,
I want to write plugin for Acrobat Reader, that's mean I need visual studio or is enough just to have some c compiler ?
One more things. I find out I can use a javascript code do hide toolbar menu and menu item and I founded some inforation that is not possible use that way to disable context menu on right click mouse button. Is that correct ?
Best regards,
grynien

Look at the documentation:
http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/wwhelp/wwhimpl/js/html/wwhel p.htm?&accessible=true
Look at 'Developing for Adobe Reader' in 'Introduction to SDK'.

What license neede to VSS in CAT 4500 with SUP7L-E

I have two identical chassis with identical cards and supervisors SUP7L-E. License level is ipbase. Is it possible to deploy VSS in this configuration?
I thought it is, but I've found doc http://www.cisco.com/c/dam/en/us/products/collateral/switches/catalyst-4500-x-series-switches/at_a_glance_c45-696645.pdf where:
Supported supervisors on Catalyst 4500-E Supervisor Engine 7-E or 7-LE (identical pairs)
Minimum license IP Base or higher (7-E) or special license (7-LE and Catalyst 4500-X)
What means special license?
In this guide https://supportforums.cisco.com/document/124626/virtual-switching-system-vss-configuration-cisco-4500-series-switches we have only:
3) Minimum license : VSS will work with IP BASE or ENTSERVICES license; it doesn't work with LAN BASE .For information about Software Activation Licensing please refer Cisco Catalyst 4500E Supervisor 7-E and 7L-E and Cisco Catalyst 4500-X Series Software Activation Licensing Deployment Guide.

I have the same issue.
We are configuring VSS on Sup7L-E which has been purchased with IP Base licensing, however when we look at the licensing summary, it indicates that a feature of Enterprise Services has been configured .
Currently we have only configured VSS, so this indicates Enterprise Services is required for VSS, however I cannot find any information confirming this.
Switch#sho license sum
Index 0   Feature: entservices
          Period left: 8 weeks 4 days
          License Type: Evaluation
          License State: Active, Not in Use, EULA not accepted
          License Count: Non-Counted
          License Priority: None
Index 1   Feature: ipbase
          Period left: Life time
          License Type: Permanent
          License State: Active, In Use
          License Count: Non-Counted
          License Priority: Medium
Index 2   Feature: lanbase
          Period left: 0 seconds
Index 3   Feature: internal_service
          Period left: 0 seconds

What will exactly not work when I work with ADF application on IE9 browser.

Can anyone help me in understanding which feature of an ADF version doesn't work on IE9.( Ex:Inputcombolist)

This bug was fixed in JDeveloper 11.1.1.6.0.
For JDeveloper 11.1.1.5.0, patch 11850659 is downloadable from "My Oracle Support" (MOS).
For more information, see Note 1420818.1 - In IE9, Input Components Lose Their Values When Using an af:inputFile on the Same Form - that we published in MOS

I have a new iPod touch and an iPad all my videos work on the iPod, but not on the iPad. What am I doing wrong when I syn with iTunes ?

iPad 2 does not show videos. I just get a black screen when I hit the video app. The videos show as being loaded when connected to iTunes.

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

HT201210 what is the error 0xE8000024 when restoring ipad with itunes in recovery mode

Ipad locked up and I had to restore via recovery mode. error 0xE8000024 popped up several times during the process as well as the autoplay dialog box. Is this normal?

There is some troubleshooting for 0cE8 error codes on this page, which you could you see if it helps fix it : http://support.apple.com/kb/TS3221

Nomad Jukebox Zen Xtra: Need help getting it to work with Vis

Does anyone know if the Zen Xtra will work with Windows Vista 32-bit's? I have tried installing the software that came with my MP3 player on my laptop that runs with Vista and it just doesn't work. Are there new drivers that I need? Please help!

i just found another, easier way to make you zen xtra work with windows vista
go to the support page and download the oldest driver, i think it's version .30 or somehting like that
install that- it should prompt you to overwrite a newer version of the driver, if it does, say ok
vista might then ask you if it installed correctly, say no, and run the installation in compatibility mode
then download the oldest version of nomad explorer, and install that
instead of using the preset instalation directory, select browse
i'm not sure if this has any effect, but i think some of the folders are renamed for vista
when the installation is finished, select "restart my computer now"
if you wait, it may not work properly
this should get nomad explorer running properly with vista
if you don't like this program and prefer creative media source organizer, you can now transfer your music to your harddri've and update your firmwar, without having to worry about external storage, a dual boot system, or any of those messy options

What I've learnt so far and what I need to learn next.

Hi,
I've been struggling with Extension Builder 3 for 2 days and have made some head way with it but I've got a long way to go.
If you are a novice like me, this post will could provide some useful info, if you are an extension builder guru, skip this part and try help me with what I need to learn
What I've learnt:
1) Extension Builder 3 sucks but CCEB4B is awesome: http://davidderaedt.github.io/CC-Extension-Builder-for-Brackets/
     - EB3 requires you to close down Photoshop everytime you want to test your extensions, CCEB4B doesn't
     - EB3 is slow and ugly, CCEB4B is fast and beautiful.
     - CCEB4B set's up an extension icon in your manifest that you can edit straight away (nice touch).
2) AngularJS (or something similar) is a must have for advanced extensions. Using controllers helps abstract your code which is always nice.
3) You can't automagically JSON an object in ExtendScript and send it back to JS, you have to manually do it which isn't great but works well as an extension, (although not all photoshop object work with extensions, namely Layers & ArtLayers).
var ArtLayer = function () {}
var ArtLayers = function () {}
ArtLayer.prototype.toJson = function() {
    return "{ name: '{0}', bounds: { left: '{1}', top: '{2}', right: '{3}', bottom: '{4}' } }".format(
        this.name,
        this.bounds[0],
        this.bounds[1],
        this.bounds[2],
        this.bounds[3]
4) String.format function is handy Used in the code above.
if (!String.prototype.format) {
String.prototype.format = function() {
    var args = arguments;
    var sprintfRegex = /\{(\d+)\}/g;
    var sprintf = function (match, number) {
      return number in args ? args[number] : match;
    return this.replace(sprintfRegex, sprintf);
5) Always use ExtendScript Toolkit to verify that your JSX files run before testing your extension, it's much easier to debug problems that way.
6) Adobe generator looks good, if you are making anything that exports images you probably want to use it instead of looping through all the layers via ExtendScript.
What I need:
1) Event Reference for use with CSInterface.addEventListener
2) A way to sychronously return a result from CSInterface.evalScript
3) Can ExtendScript have the same power Generator has with exporting layers?
4) Why can't we do Layers.prototype.toJson = function etc?

What I need:
1) Event Reference for use with CSInterface.addEventListener
I would like that too. Documentation is pretty sparse and none of the event listener examples actually work (inside of PPRO anyway).
2) A way to sychronously return a result from CSInterface.evalScript
Not sure why you need it to be synchronous. Your should always expect that parts of your app are blocking and therefore use callbacks religiously. If you need sequential execution you can achieve that inside of the jsx file. Also, the evalScript does let you define a callback method quite easily.
Kai

Best practice when using Tangosol with an app server

Hi,
I'm wondering what is the best practice when using Tangosol with an app server (Websphere 6.1 in this case). I've been able to set it up using the resource adapter, tried using distributed transactions and it appears to work as expected - I've also been able to see cache data from another app server instance.
However, it appears that cache data vanishes after a while. I've not yet been able to put my finger on when, but garbage collection is a possibility I've come to suspect.
Data in the cache survives the removal of the EJB, but somewhere later down the line it appear to vanish. I'm not aware of any expiry settings for the cache that would explain this (to the best of my understanding the default is "no expiry"), so GC came to mind. Would this be the explanation?
If that would be the explanation, what would be a better way to keep the cache from being subject to GC - to have a "startup class" in the app server that holds on to the cache object, or would there be other ways? Currently the EJB calls getCacheAdapter, so I guess Bad Things may happen when the EJB is removed...
Best regards,
/Per

Hi Gene,
I found the configuration file embedded in coherence.jar. Am I supposed to replace it and re-package coherence.jar?
If I put it elsewhere (in the "classpath") - is there a way I can be sure that it has been found by Coherence (like a message in the standard output stream)? My experience with Websphere is that "classpath" is a rather ...vague concept, we use the J2CA adapter which most probably has a different class loader than the EAR that contains the EJB, and I would rather avoid to do a lot of trial/error corrections to a file just to find that it's not actually been used.
Anyway, at this stage my tests are still focused on distributed transactions/2PC/commit/rollback/recovery, and we're nowhere near 10,000 objects. As a matter of fact, we haven't had more than 1024 objects in these app servers. In the typical scenario where I've seen objects "fade away", there has been only one or two objects in the test data. And they both disappear...
Still confused,
/Per

I need to connect my mac air with my mac mini home computer?

I cannot find out what is needed to connect my mac air with my home computer, a mac mint

If you have a WiFi network at home, the MBA should easily connect to the Mac mini or vice-versa for anything from file sharing, oprical disc sharing, or even screen sharing. Start in System Preferences > Sharing and turn on the desired services. In that same panel you can choose whether that access is for all users or for specific user accounts on the particular system.
Then go to the other computer and open Finder then look under "shared" and select the computer you want to share. If you have activated screen sharing as well as file sharing you will actually have logon to both shares using the user account and password for the user you specified on the other machine.

What i need to write when i buy with VISA - ( country - ? AAO? or .... ) in Kazakhstan ????

Similar Messages

Maybe you are looking for