What i sthe diff b/w Interactive Report and ALV Interactive report
Hi All,
I want to know the basic diff b/w Interactive report and ALV interactive report.
Can any one tell me the exact diif.
Thanks in Advance,
Jd
hi jagadish,
both are used for same purpose
interactive report means an output list which displays basic details & allows user to interact, so that a new list is populated based on user-selection. With interactive list, the user can actively control data retrieval and display during the session. a total no of 21 lists including main list are genearetd in interactive lists.
I suggest to use ALV.by using ALV we can display in Grid as well as list format.
Output format will be good . Sorting,Filtering facilities are provided by itself.We can have column headings also. using oops we can also do alv reporting.
if helpful reward some points.
with regards,
suresh babu aluri.
Similar Messages
-
What is the diff b\w open form and start form in scripts.
Hi,
can any one tell me what is the diff andb\w open form and start form in scripts.when we should use open form and when start form.Hi Friend.
I have understood some usefull information and would like to share with you.
Within one transaction, you can open and close several layout sets using OPEN_FORM and
CLOSE_FORM, however not simultaneously. You can use parameters in the OPEN_FORM to control
whether the output is stored in the same print request. But also the SAP spool decides,
depending on several plausibility checks, whether new output is appended to an existing
print request or whether to create a new print request anyway.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
You cannot combine ABAP/4 list output and SAPscript output in one print request.
START A LAYOUT SET AGAIN
Usually a print program does not print only one urging letter or one account statement, but
several layout sets for different customers. To have the output for each customer begin with
the start page of the layout set, you must start the current layout set again and again.
To start a layout set again, you must first end the current layout set and then open the
layout set again. Within one print request, first call the function module END_FORM. It
executes the final processing for the current layout set. Then start the layout set again
using START_FORM. Output then begins again on the start page of the desired layout set.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION CLOSE_FORM
Hope your obstacle is cleared.
If not do ask me again? -
What is the diff b/w flat file and legacy system?
Hi everyone,
when v say v r working on scenario FILE to FILE? which format of file r v usually working on? and what is the diff b/w flat file and legacy system?
thanxHi,
<i>when v say v r working on scenario FILE to FILE? which format of file r v usually working on?</i>
>>>Many a times it will be a Flat file with CSV format,Tab delimited format, fixedlength fields.
<i>what is the diff b/w flat file and legacy system?</i>
>>>We can not differeniate like this..
Flat file may come from any systems, it may be live system or legacy system.
Legacy system- is something like old, or past one. If you talk about SAP , then older versions of SAP can be called as a legacy system.
So it may be a file system, or any system which is old version but it doesnot mean it is not in use,
Regards,
Moorthy -
What is main diff b/w imported Archives and External Defination in IR
What is main diff b/w imported Archives and External Defination in IR
Hi Vijay,
ED-standard schema for describing the message structure.If you have the structure provided to you from some external application you can use it in PI directly without recreating in PI.you can import following formats which are used to describe message schema
WSDL (Web Service Description Language),
XSD (XML Schema Definition Language),
DTDs (Document Type Definitions)
Imported Archives: its used basically for java and xslt mapping where you create the required mapping externally using some tools
(java-eclipse/NWDS .XSLT-stylus studio).You can also implement XSLT and Java mappingsf and save them as archives in the Integration Repository.
read More details here
[ED|http://help.sap.com/saphelp_nwesrce/helpdata/en/26/9e97b0f525d743882936c2d6f375c7/content.htm]
[Imported Archives|http://help.sap.com/saphelp_nw04/helpdata/en/4c/b2ad3de2d76b3be10000000a114084/content.htm]
Regards,
Srinivas -
What is the diff b/w transactional cube and std cube
What is the diff b/w transactional cube and std cube
Hi Main differences,
1) Trasactional infocube are optimized for writing data that is multiple user can simultaneously write data into it without much effect on the performance where as the std infocube are optimized to read the data ie.e through queries.
2) transactional inofcubes can be loaded through SEM process as well normal laoding process.Std can be loaded only thorugh normal loading process.
3) the way data is stored is same but the indexing and partionong aspects are different since one is optimized for writing and another one for reading.
Thanks
Message was edited by:
Ajeet Singh -
What is the diff b/w Conventional Path and Direct Path?
What is the diff b/w Conventional Path and Direct Path?
While doing exp/imp
which one is best in peroformance Conventional Or Direct
consider my Oracle is 9i (9.2.0) and Os is Solaris 9
Could you please clarify.....
Thankshttp://download.oracle.com/docs/cd/B10501_01/server.920/a96652/ch01.htm#1005685
-
What is the diff in term of fastness and performance between retina and last mbp version in PERCENTAGE ?
Ty to not give links i want an answer here and now by someone who knows what hes talking about.But old mbp is not available with ssd you have to buy the option right ?
Anyway, outside reboot speed is there a speed difference between retina and old version in term of general processing ?
I have a 2009 MBP that originally came with a SATA drive. Recently, I swapped drives; now, it has 512GB SSD. In other words, you can easily increase the speed of a standard MBP. There is going to be an increase in general processing with the Retina MBPs, but the significance depends on the application. For example, booting Photoshop used to take just over 30 seconds with a SATA drive; with an SSD, it's just under 10 seconds. But controlling for the SATA vs SSD, the differences are smaller and incremental.
Ok you speak about a diff with the retina in term of better graphics when zooming but will this advantage be relevant also on my external giant monitors ?
I can't answer that, so I'll leave that to someone with more expertise in this area. -
What is the diff b/w web as and Netweaver 7.0.
hi
SAP 4.7 is based on Web AS
ECC 6.0 is based of Netweaver 7.0.
pleze illusterate this oneNow SAP evolved into using the Internet technology and is called as service oriented architecture (SOA). There are lots of functionalities available in ECC 5.0 and ECC 6.0 compared to R/3 in integrating with other systems. Probably to understand the specific release dependent changes, you can go thro the help documentation. For example to understand the diff between ECC 6.0 and ECC 5.0
1. ECC 6.0 enables Business area posting - Segment reporting made easy.
2. Profit center accounting is through new GL.
3. Document splitting: Split of entry to post assets and liabilities to respective profit centers. (Balance sheet items)
4. Enables commitment of FM, improved CRM feature & Mobile sales feature
Here are the list of Transactions not their in ECC 6.0
QAS1 Download Insp. Specs. (Obsolete)
QAS2 Download Basic Data (Obsolete)
QAS3 Upload Results (Obsolete)
QAS4 Upload UD (Obsolete)
WLF1K Report used to generate WLF1K is: SAPLWLF1
O07C Report used to generate O07C is: SSFPSEMAINT -
What is the diff b/w Sap Scripts and Smart Forms
Hi,
Whats the diff b/w SAP Scripts and Smart Forms..
I need the internal explanation for both Smart Forms and SAP Scripts mean when we execute what happens whether Print Program r Forms starts execution 1st and SIMILARLY FOR SMARTFORMS WHETHER FM'S R FORMS.
Thanks & Regards,
Gopi.Hi
Difference with SMARTFORMS vs. SapScript(SE71)
The Following are the differences :-
a) Multiple page formats are possible in smartforms which is not the case in SAPScripts
b) It is possible to have a smartform without a main window .
c) Labels cannot be created in smartforms.
d) Routines can be written in smartforms tool.
e) Smartforms generates a function module when activated.
f) Unlike sapscripts (RSTXSCRP), you cannot upload/download Smartform to your local harddisk.
It was said that it was provided in CRM 3.0 version, but not available in R/3. You can download smartforms into Local PC in a XML format. In the same way you can upload this XML format into Smartform. From the smartform editor itself you can call download option, if you are working in CRM 3.0 environment.
In R3 also, you can download into XML format. However, it's not sure about uploading. Refer to the program 'SF_XSF_DEMO'.
In 4.7 Enterprise, other have seen this utlity which is completey missing in 4.6c. There is functionality to downlaod a complete form or only a particular node. (Utilities -> Download form). It will create a XML file and save it in the hard disk.
For others, if you want to download/upload the Smartforms source, you will need the help from the Basis people. What you can do is to create a Transport and then FTP down to your local harddisk. When you need the Smartform source in another system, you have FTP up the Smartforms file back to the SAP server. Finally, the Basis team, will tp it into your system.
g) The protect and endprotect command in sapscript doesn't work with smartforms. For example on a invoice: First data of position no 80. is printed on page one, other data of position no 80 is printed on page 2. And there's nothing you can do about it. Actually, there is something you can do about it. By using a folder node and checking the 'protect' checkbox, everything in that folder will be page protected.
check out this link:
http://www.sap-img.com/smartforms/sap-smart-forms.htm
Reward points if helpful.
Regards,
Swathi. -
What is the diff b/w Abstract class and an interface ?
Hey
I am always confused as with this issue : diff b/w Abstract class and an interface ?
Which is more powerful in what situation.
Regards
VinayHi, Don't worry I am teach you
Abstract class and Interface
An abstract class can have instance methods that implement a default behavior. An Interface can only declare constants and instance methods, but cannot implement default behavior and all methods are implicitly abstract. An interface has all public members and no implementation. An abstract class is a class which may have the usual flavors of class members (private, protected, etc.), but has some abstract methods.
Edited by SASIKUMARA
SIT INNOVATIONS- Chennai
Message was edited by:
sasikumara
Message was edited by:
sasikumara -
What is the diff.b/w UD connect and DB Connect
Hai,
can any one expalin diff.b/w UD connect and DB connect...
RegardsHi Lakshmi,
please check the threads below
UD and DB Connect
DB connection,UD Connect Document
Also this
http://help.sap.com/saphelp_nw04s/helpdata/en/a6/c0e51914e842e19bda39dbbe4fe78c/frameset.htm
hope this helps!
Regards
Chandru -
WHAT IS THE DIFF B/N DRILLDOWN REPORT AND INTERACTIVE REPORT
HI
EXPERTS CAN U HELP ME FOR THIS
THANKUHi....
There is no difference between drill down and interactive report, they are the same.
With drilldown reporting, SAP provides you with an interactive information system to let you evaluate the data collected in your application. This information system is capable of analyzing all the data according to any of the characteristics that describe the data. You can also use any key figures you wish to categorize your data. You can display a number of objects for a given key figure, or a number of key figures for a given object. In addition, the system lets you carry out any number of variance analyses (such as plan/actual comparisons, fiscal year comparisons, comparisons of different objects, and so on).
You can produce both simple, data-directed lists (basic reports) and complex, formatted lists in drilldown reporting (form reports).
Drilldown report provides you with comfortable functions for navigating through your data. For example, you can jump to the next level of detail or the next report object on the same level, hide individual levels and switch between the detail and drilldown lists. It also provides a number of additional functions which let you process lists interactively (sorting, conditions, ranking lists, and so on). SAP Graphics, SAPmail and the Excel List Viewer are also integrated into drilldown reporting.
The drilldown functions are divided into three groups which differ in the number of functions available. That way each user can choose the functional level most suited for his requirements.
In addition to the online functions for displaying reports, drilldown reporting also provides functions which let you print reports. A number of formatting functions are available to let you determine the look of your printed reports (page breaks, headers and footers, underscores, and so on).
The menus and the functions available directly on the drilldown report make it easy to use the information system.
What is an Interactive Report?
An interactive report generally works in the following fashion:
1. Basic list is displayed.
2. User double clicks on any valid line
or
User selects a line and presses as button on the tool bar.
3. The corresponding event is triggered
4. Then in the code, the line on which action was done, is read.
5. Depending on the values in that selected line, a secondary list is displayed.
6. Steps from 2-5 are repeated till the end.
From the above explanation, I believe, its clear that, the 20th list, will essentially depend on the "selected line" of 19th list. According to your question, you want to move to 20th list directly, without "a prior list". May I know the exact requirement so that, an appropriate solution can be suggested?
Again, your question was, how to move to 20th list directly on pressing of execute button. Its not possible to move to 20th list. You must cross over a basic list, before you can go to a different list level, using the code given by Pavan.
What are Drilldown reports?
The lines of basic list of a drilldown report when clicked, will take the user to the corresponding (standard) object's display.
For eg: Suppose your report's primary component is purchase requisition, (assume you are printing PR details), and the basic list displays details of many PRs.
Eg: when clicked on a particular line of the PR basic list, it takes you to std t-code me53 (display of purchase requisition). This is the 'Drill-down' functionality.
For this, in the at-line selection of your program, as per the above ex: you'll set the parameter ID of PR number BAN (that you can get from Data element) in memory (using set parameter id) and then calling the corresponding transaction (usually skipping initial screen of the std t-code).
Likewise, if it's Material Number (Matnr), you'll be displaying MM03 transaction w.r.t. the line's matnr
Hope it will help u
regards
Bala -
What is the Diff B/w Occur 0 and Occurs 10
Hi ,
I am creating an internal table one with occurs 0 and other with occurs 10
if i extract the data from the data base and store in the internal table's then what will be the difference ,how these two internal tables will differ.The number <N> indicate how many lines has to have the table in initialization time: i.e. when the program is loaded in memory, the space for the table depends on the initialization numbers of the records.
AT run time if the table needs more space, this'll automatically be enhanced.
But If you know your table can have a certain numbers of records, you can indicate it in the defination, what'll improve the performance:
all the space the table needs is taken at the beginin, so it doesn't need to enhance the space at run time.
When this initial area is full, the system makes twice as much extra space available up to a limit of 8KB. Further memory areas of 12KB each are then allocated.
You can usually leave it to the system to work out the initial memory requirement. The first time you fill the table, little memory is used. The space occupied, depending on the line width, is 16 <= <n> <= 100.
It only makes sense to specify a concrete value of <n> if you can specify a precise number of table entries when you create the table and need to allocate exactly that amount of memory (exception: Appending table lines to ranked lists). This can be particularly important for deep-structured internal tables where the inner table only has a few entries (less than 5, for example).
To avoid excessive requests for memory, large values of <n> are treated as follows: The largest possible value of <n> is 8KB divided by the length of the line. If you specify a larger value of <n>, the system calculates a new value so that n times the line width is around 12KB." -
What is the diff. b/w certificate login and normal login?
Dear All,
I have recently cleared my SAP certification, so i am now operating with a new account with MY S.NO and Password provided by SAP. prior to that i had a normal account.
I cant find difference in both the acounts. I was told that in case of certified candidates the SAP logo is displayed. Is It?
If its tru, y cant i see any logo or diff. by my name?
rgds,
PrashantDear Prashant
No SAP Logo will display with your name after certification but it will display when you will become the employee of SAP, So have to wait for this.
You can just request for Logo of your Certification but this will not display with your name on SCN
I think you were using your P account before this one. The main difference between these two is that you can login to [Server Marketplace|http://service.sap.com/] with your S ID but can't with P ID and also you can use Certificate Login (Sign Sign-On) option for your S ID.
one other thing that i noticed that when you will go to edit your Business Card in the Last Tab (COMMUNITY) you will see option MY RELATION TO SAP here you can show Customer I think this option is available for P account.
Thanks and Regards,
Faisal -
What is the diff between the ipad 3 and the i pad 4th generation
what are the main differences between the i pad 3 and the 4th generation
http://www.techradar.com/news/mobile-computing/tablets/ipad-4-more-than-twice-as -fast-as-ipad-3-benchmarks-reveal-1108743
http://www.digitaltrends.com/mobile/ipad-3-vs-ipad-4/
Cheers, Tom
Maybe you are looking for
-
Issue: Back up failed when syncing with Itunes
I get an error message when syncing our iPods with iTunes - - - (iTunes could not back up the iPod, "Isaac's iPod," because a session could not be started with the iPod.) Any hints as to what this is indicating?
-
How can i op out The all content include calender reminder and 3rd party on my icloud?
Help me to up out these all content on my iCloud n itunes cos i dont Know how can It works by sync
-
Hi guys, Pls clarify my doubt,In my pricing procedur I have not maintained any value in subtotal column against the condition type kept all the columns blank even then how system calculating the Net price and the tax in billing Regards Bhuvanashree
-
Ipod isnt seen on computer or itunes...updater trouble
well i was putting new songs on my new ipod and my computer froze....then all my songs were gone and my computer or itunes couldnt see my ipod...i tried the new updater and now everytime i connect my ipod my computer slows down and ipod is seen as re
-
Hi experts, I have query in MIRO, I want to know how i Can get exact value of unresricted use stock (LMENGE01). actually my requirement is LmMENGE01(unrestricted use stok) = LOSMENGE (Inspection lot quantity) - (LMENGE02 + LMENGE03 + LMENGE04 + LMENG