What if best way to watch quick time movies?

What is the best way to watch and compile quicktime movies that come into iphoto from my point and shoot camera? Should I put them into KEYNOTE, or export into IDVD? It's nice to edit them somehow, too..

Once you launch iMove you will see the iPhoto Library in the Event Library (bottom Left) then click on your iPhoto Videos it will load all of your videos.  Take a look at this link, http://www.apple.com/support/imovie/

Similar Messages

  • Whats the best way of watching iplayer through my apple tv?

    When mirroring off my mac book pro the picture stutters. When playing iplayer from my iphone the picture is very grainy. And I cannot get it to work from my ipad at all! Any help? Thankyou

    All of those problems sound like you have network issues.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

  • One headphone does not work or works 50% of the time.  What is best way to resolve?

    one headphone does not work or works 50% of the time.  What is best way to resolve?

    First of all, I'd recomend resetting the iPod. Do this by pressing the 'Menu' and 'Center" buttons for 10 seconds or until the Apple logo appears.
    If this doesn't work, then it sounds like a hardware fault.
    To identify the issue, if you have one, try plugging the iPod into a speaker through the dock. If this works, then the issue is with the headphone jack. If not then the logic board is dead.  If the iPod is less than a year old, then it can be repaired by Apple for free. Just book an appointment for the Genius bar.
    If not then, you could see about sending it to an iPod Repair Company, such as my own. A replacement headphone jack would cost £30.00 in the UK, including next day delivery. Other companies you could try would beUKiPodRepairs, but we guarantee to beat any quote that you get.
    Hope that this helps,
    Mark Sweeney
    Dr Pod Founder

  • Whats the best way to transfer everything from my old macbook pro to a new mac mini, i have a external hard drive which i backup to regularly via time capsule

    whats the best way to transfer everything from my old macbook pro to a new mac mini, i have a external hard drive which i backup to regularly via time capsule

    Check out > OS X Lion: How to use Migration Assistant to transfer files from another Mac

  • What is the best way to get a time capsule to work with a new network name?

    What is the best way to get a time capsule to work with a new network name?

    Well it seems that you did not explain to us the full story.  Did you change ISP's or something? Why would it not show up anymore?
    What colour is the light on the time-capsule? If it's blinking amber, then you probably need to do a factory-reset. That should get it to show up again in AirPort Utility.

  • What is the best way to watch cricket on line in Mac Book pro

    what is the best way to watch cricket online in Mac Book Pro

    This is not a place where we discuss about sports, google is a nice place to find a good website.

  • HT204382 what is the best apple download for quick time?

    what is the best apple download for quick time?

    None. Just run QuickTime. It is part of your Lion system. It is in your Application folder.

  • Using the new iPad, what's the best way to watch video files (away from home) which are stored on a NAS (WD My Book Live)? Any help would be appreciated!

    Using the new iPad, what’s the best way to watch video files (away from home) which are stored on a NAS (WD My Book Live)?  Any help would be appreciated!

    Before you go, move the files to I tunes and sync them down.  There is no viable way to stream from your nas drive to the pad.

  • Whats the best way to move files from a hard drive that wont boot?

    I made a bootable USB disk and it appears to work fine. I can still read and open files on the old disk (admin account only) from the new USB drive the old one doesn't boot. I don't have a backup but would like to move files to the USB and then reformat the old drive. 
    Whats the best way to capture the data?
    There are four user accounts on the old drive. Only one on the new drive so far. Do I need to set up four accounts on the new drive in order to copy data from each?

    Time Machine is for making backups and restoring ones it previously created. It doesn't restore data backed up or copied in other ways. In your case, it's better to use a cloning utility or manually drag the files than it is to use Time Machine.
    (124317)

  • Using final cut studio what the best way of getting a mini disc in to FCP?

    I do some weddings and record some audio on to a mini disc recorder ( the small ones . On my avid liquid edit suite I just used to run it in live or ingest it on a 2 hour timer, and just record audio.
    What the best way to do it with final cut studio and final cut pro?

    Is there a reason you can't do the same on your mac system? What outputs does the audio recorder have?
    Jerry

  • What actually is Quick Time movie?

    Hello guys,
    when exporting my HDV video project from FCP using Quick Time movie option, what actually is it? When I look at file info, it says .mov file, Quick Time movie format, codec HDV 1920x1080. So what is Quick Time movie? And how it differs from let's say QuickTime in Compressor?
    Thank you.

    As has already been stated, a .mov file is like a box that contains video and audio. The video and audio could be made from any number of codecs.
    There is NO universal high quality video file format that will playback an all systems or platforms. In order for ANY video/audio file to playback on any given system/platform, it MUST HAVE the codecs used to make those files installed on that system. There are many QuickTime .mov files that will NOT playback on a Mac, IF the specific codec needed isn't installed on that Mac.
    The same is true with the .avi files format; .avi is just a box like QuickTime.
    You're best bet would be to identify the playback systems requirements for video/audio files and then target your output for that. Do it for every system/platform/delivery method that the file will be played on.
    For example, I produced a program that would be played at the main branch of our library. Their playback system required an MPEG-2 Transport Stream and had very specific bit rate requirements. They also wanted the program to air on the local PBS channel, which had totally different requirements. And finally, they wanted several copies on DVD to distribute to donors whom helped make the exhibit possible. So with just one program, I had to output three different file types for this one project. This is also true of television broadcast. Different broadcasters will have different requirements. Some want BetaSP tape, some want DigiBeta. Some want an MPEG-2 Program Stream and some might even want a DVD-Video. Don't expect there to be a "one file fits all" type of situation.
    -DH

  • My business has 100 ipads 3g with no control at the moment - i need to now control the ipads - what apps they can use - and restict certian use on the ipads - whats the best way to do this - it will need to be done remotley.

    my business has 100 ipads 3g with no control at the moment - i need to now control the ipads - what apps they can use - and restict certian use on the ipads - whats the best way to do this - it will need to be done remotley.

    MDM  -- moble device management 
    MDMs
    Airwatch, Meraki, MobileIron, Profile Manager on OS X Server, or Zenprise
    For a comparison see this page:
    http://www.enterpriseios.com/wiki/Comparison_MDM_Providers
    Airwatch
      http://www.air-watch.com/
    Meraki -- A free MDM   [ expect lots of email and phone calls about upgrades ]
      http://www.meraki.com/products/systems-manager/
      https://discussions.apple.com/thread/4067210?tstart=0
      Good howto by Sergio Sosa.
      https://discussions.apple.com/thread/2594001?start=15&tstart=0
    MobileIron
      http://www.mobileiron.com/
    Profile Manager by Apple
    Zenprise
      http://www.zenprise.com/

  • My iPad screen is not responding, whats the best way to clean it and what could be the problem, its 2 days old

    my iPad screen is not responding, whats the best way to clean it and what could be the problem, its 2 days old

    Braunzoes wrote:
    my iPad screen is not responding, ...
    Try a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    Braunzoes wrote:
    ... whats the best way to clean it ...
    How to Clean Apple Products
    http://support.apple.com/kb/HT3226
    Braunzoes wrote:
    ... its 2 days old
    iPad User Guide iOS 6

  • Whats the best way to transfer all my pic and vid files from Mac Air to back up drive to free up space on hard disk?

    whats the best way to transfer all my pic and vid files from Mac Air to back up drive to free up space on hard disk?

    Get a third drive if needed, open the Time Machine pane of System Preferences, set it not to exclude that drive, and drag the files to it. If you're moving an iTunes or iPhoto library, launch the application with the Option key held down and choose the moved library.
    (118789)

  • Whats the best way to go about learning C?

    I'm an almost complete noob when it comes to programming. I did write a few simple pascal programs about 10 years ago at school, thats about it.
    What I hope to achieve is (hopefully) not that complex, but I'm not sure where to start learning. My reason for wanting to learn is this: I really love MOC (music on console) but I ended up wanting a GUI player which still worked without the mouse. Every one I tried just isnt a patch on MOC, IMO, or just has one or other feature that doesnt work without a mouse. So it occurred to me, I have the source code for all these GUI players and the source for MOC, perhaps I can "modify" MOC and create a GUI version, or alternatively write some kind of front end to MOC.
    So far, I have had a go with Glade and Anjuta IDE, but my knowledge of C being almost nonexistent is making things tough. I'm probably trying to do it wrong anyway, my thought was to create a GUI in glade and make it call functions from the moc source... :?:
    So I need a crash course in C programming with Glade (I think?) and I'm not sure what the best way to proceed is.
    Any tips on how best to learn? I ask here because you all seem to be the most knowledgable group I can think of

    I'm not trying to discourage you, but the idea of Frankensteining all that C source into your own custom GUI music player is likely to cause nothing but hours of frustration. C is a great language for system programming, but for most application software it's far too low level and for most beginners it's far too dangerous (it lets you do bad things that can kill your app in dozens of intersting and extremely hard to debug ways).
    What I would suggest is that you first off break the problem in half. Use a client/server approach. The server does all the low-level heavy lifting of decoding/decompressing the music files and sending them to your audio subsystem. Something like Music Player Daemon (MPD) is perfect for the server part and is specifically designed to be controlled by a separate client program.
    Then all you have to do is write the GUI client of your dreams. For that I would recommend something like Python plus the GUI library of your choosing (Qt, GTK, wxWidgets, etc. all have nice Python bindings). Python is a far easier beginner language than C and can do much more work with much less code. You'll spend less time mucking around looking for memory leaks and invalid pointer references and more time actually making your GUI do useful work Oh, and there just happens to be a Python MPD client library so the task of communicating with the server gets even easier.

Maybe you are looking for