What if HANA was used to process Large Hadron Collider (LHC) Data?

What if you want to record and analyse the data about the particles which are accelerating at 99.99% speed of light?
Watch this video on how data are collected and processed at LHC
Please Download following presentation which provides more insight on Information System which was used in LHC
https://cms-docdb.cern.ch/cgi-bin/PublicDocDB/RetrieveFile?docid=6057&version=4&filename=CHEP-2012-Lucas-Taylor-CMS-Information-Systems-final.pdfhttps://csc.web.cern.ch/CSC/2013/iCSC2013/Right_menu_items/Handouts/Per_lecture_pdf_files/07_Lecture_07-Grid-Interpretation-1_slide_per_page.pdf
https://cms-docdb.cern.ch/cgi-bin/PublicDocDB/RetrieveFile?docid=6057&version=4&filename=CHEP-2012-Lucas-Taylor-CMS-Information-Systems-final.pdf
To know more about LHC visit following links
https://www.youtube.com/watch?v=Nqp43FPx414
http://home.web.cern.ch/about/computing/processing-what-record
http://en.wikipedia.org/wiki/Large_Hadron_Collider
https://csc.web.cern.ch/CSC/2013/iCSC2013/Right_menu_items/Handouts/Handouts.htm
https://cms-docdb.cern.ch/cgi-bin/PublicDocDB/ListBy?topicid=187
http://cds.cern.ch/record/922757/files/lhcc-2006-001.pdf
About Grid Computing
http://en.wikipedia.org/wiki/Grid_computing

Thanks Thomas,
infact SAP is working with Helix nebula. who is researching on use of cloud technologies for LHC Data processing. Using HANA for processing data generated from LHC can help scientists in taking faster decision which can save cost of infrastructure perhaps.
CERN-LHC Use Case | Helix Nebula
http://www.helix-nebula.eu/the-partnership
I found POC done by Michelle Gary which is i think may be helpful.
Physics Analysis in SAP HANA -- Simple PoC
Regards,
Pratik

Similar Messages

What execution plan was used?

Hi there
How can I find out what execution plan was used for an SQL when it was executed as part of the batch-process at night? 10gR2 on ASM, RHEL 5.8 64bit.
Best regards

Are you using the enterprise edition? Are you licensed to use the AWR? If so, assuming that the query ran long enough to be captured in an AWR snapshot (which seems likely if you're asking this question), DBA_HIST_SQL_PLAN will have the plan information and DBA_HIST_SQLSTAT will tell you the plan_hash_value (or values) that were used for a particular SQL_ID in a particular SNAP_ID. DBA_HIST_SNAPSHOT will tell you what SNAP_ID (or set of snap_id's) corresponds to whatever time period you are interested in.
Justin

How to tell what recovery point was used for restore

Is there a way to determine what recovery point was used for a restore after the restore was started.

The question comes from the experience of having a package installed but not being able to build it from the same PKGBUILD (due to nontrivial issues). The package must have been built successfully by *a* build system, so ideally one would want to replicate that build. The relevant differences I could think of are the compiler flags and to a lesser extent the hardware build platform.
You should describe these supposedly non-trivial issues. I've never experienced what you describe in my years using Arch, nor have I ever heard it suggested that the famously vanilla Arch packages are built using some sort of unconventional compiler flags. I have heard multiple developers say using highly modified CPU optimizations and modified linking and such are mostly pointless, however. So I'd bet a week's pay that the build system uses vanilla GCC with the default settings. Why would the thing that actually builds Arch Linux be the one part of the Arch ecosystem that doesn't abide by the Arch standards? Why would only some packages have library linking problems and such when all packages are built on the same machine against the same library versions---and thus the conditions resulting in a failed build would be identical to those in a successful build? I could be wrong, but I think you're on the wrong track. The quickest way to find out is to describe what the real problem is, not what you imagine the solution to be.

My childs ipod touch is missing, someone tried to reset the password around the same time it "Vanished" is there a way to track what WIFI network was used to make this attempt?    We think it was taken at her school and any small info would help!

Trying to find my daughters ipod touch, the last we saw it was around thursday and strangly I recieved an email that the apple id was attempting to be changed and or reset...this was not by me or my wife and my daughter is 7 so i dont think it was her...we think it may have been taken at her school but not sure so what i was wondering was is there a way to pinpiont the wifi network that was used to make this attempt??      If it is then it will be a huge help,              This was a gift from "santa" and finding would really make us happy!!    Thanks for any and all help!!

Trying to find my daughters ipod touch, the last we saw it was around thursday and strangly I recieved an email that the apple id was attempting to be changed and or reset...this was not by me or my wife and my daughter is 7 so i dont think it was her...we think it may have been taken at her school but not sure so what i was wondering was is there a way to pinpiont the wifi network that was used to make this attempt??      If it is then it will be a huge help,              This was a gift from "santa" and finding would really make us happy!!    Thanks for any and all help!!

Find out what Apple ID was used to install an app

I've passed an iPad on to my boss and it seems I've left an app on there that keeps asking for my personal Apple ID for update purposes. Of course he's only come to me with this question when he's gone to do an update because there's 20 apps in the queue for update. So I don't know which app it is that is calling for my details so I can delete and reinstall using his ID.
Is there any way of determining what ID was used to install apps on a device? There are way too many apps now installed to delete and reinstall them all.

Thanks to Meg and rbrylawski for their comments above.
Ggross7 wrote:
You didn't answer his question. Please read the question before posting an answer.
Actually, this is incorrect, as my second post above does answer the question.

What package I can use to processing the image

Hi, all:
I am not familiar with image processing, does anybody can tell me how to filter or smooth a gif image and what pachage I can use with Java language.
Thanks!
zhu

Write it to a BufferedImage and use the necessary filter to manipulate it.

Is there a way to know what apple id was used to purchase songs?

I backed up my songs and in order to play them I need to log in with the apple id that was used to purchase them and I don't remember it. Is there any way to figure it out?

If the songs are in your computer's iTunes library then you should be to see the account that bought them - see my reply on your earlier post : https://discussions.apple.com/message/23450213#23450213
If they aren't in your iTunes library then if you try to add them (File > Add To Library), and their account isn't already authorised, then are you prompted to authorise it ?

HT1311 How can I find out, what Apple ID was used for an App I recently purchased?

I have several Apple IDs and used one of these to purchase Apple Pages. Now I'd like to use the same Apple ID to complete another purchase but just can't figure out what Apple ID I used last time...

The apps in the Apps section of your computer's iTunes library will show all of the apps that you downloaded on it and/or copied form your devices. But if I select one of the apps in the Apps section (in my library in iTunes, not Finder) in there and do get-info, then on the bottom half of the Summary tab on the popup that you I get I see :
With the 'Apple ID' field showing the account id that I downloaded it with

What light bulb to use when processing photos in Photoshop

The recommended temperature is 5600k Daylight balanced, now I'm curious - does it matter what kind of "brand" of lightbulb to use when lighting my room when working at night in processing photographs?
I am new at this and so far I have made sure my monitor is calibrated. I have also read on these forums that the brightness of a monitor has to match the brightness in the room. It sounds quite complex because I'm not sure when is "right". I can eyeball something but how do you know it is "correct" ?
This is very important for me because I want other people to view my work the way it shows up on my monitor but so far these are the only concerns I have. I have made sure to manage the color through photoshop (Adobe 1998) and when saving for web (sRGB) but so far the above questions are my biggest concerns. If a specific lightbulb matters (or any Daylight balanced will do?) and how to balance the room light with monitor brightness? I figure when the monitor is calibrated (default settings seem to be really correct when I go through the whizard) I don't need to adjust anything on the monitor, just the brightness of the light?
lastly, where does the light have to be? Behind monitor, or behind me. I heard that obvious thing is you don't want a glare created by light behind you...
Can anyone please help me out?

I find having diffuse light above and off to the side is what I prefer - and not too bright - though often I process images at night with no light on whatsoever. I have a shaded lamp that mostly lets the light out the top, where it bounces off the ceiling and makes the room lighting quite soft.
If you have daylight lighting coming in during the day (e.g., through windows as I do), for consistency's sake it might be good to try to match it (e.g., with something like the CREE LED bulbs Home Depot sells, specifically the Daylight model). Of course, if you put it in a shaded lamp it can end up a different color. For a long while I had CFL bulbs in the lamps in my office (where I edit) and the difference between my perceptions of things while editing actually WERE night and day, because the fluorescent light color is just nasty.
A bit off topic, but... I'm becoming a big fan of these new CREE LED bulbs. I took a photo of our kitchen lit by these (Daylight models) with daylight coming in a window in the photo, and the light color from outside and in matched surprisingly well - "Daylight" is actually a pretty accurate term. Indoor photos with windows usually show interior lighting looking a deep orange by comparison to overly bluish outdoor light.
-Noel

HT201250 How do I find out what portable drive was the drive I used for Time Machine Backup?

Hi, I have 10.7.4 and need to figure out what drive I was using for Time Machine Backup. I have three drives and I have connected each of them to my macbook pro, but I get an error, "Time Machine Error, The backup disk is not available" when I hit the time machine icon on the top of the screen and the "backup delayed" prompt. If I try Back up Now I get message, "Time Machine could not complete the backup. Back up disk is not available." I am trying to figure out what the time machine back up would actually look like as a file on the drives but I don't see a folder/file name Time Machine. If I enter Time Machine I can see in the far right column, in purple, the last back up date (Sept. 12, 2012), but when I hit it nothing happens. In the Time Machine preference box the select disk has, in red and to the right, "Delayed" with an "i" within a circle, and the option indicates, "Next backup: when disk is connected."
I know I have a years worth of backups on one of the three drives, but I can't figure out how the heck to find them or how to determine what was the last drive I used for the backups within Time Machine. Help please.

Hi, I have 10.7.4 and need to figure out what drive I was using for Time Machine Backup. I have three drives and I have connected each of them to my macbook pro, but I get an error, "Time Machine Error, The backup disk is not available" when I hit the time machine icon on the top of the screen and the "backup delayed" prompt. If I try Back up Now I get message, "Time Machine could not complete the backup. Back up disk is not available." I am trying to figure out what the time machine back up would actually look like as a file on the drives but I don't see a folder/file name Time Machine. If I enter Time Machine I can see in the far right column, in purple, the last back up date (Sept. 12, 2012), but when I hit it nothing happens. In the Time Machine preference box the select disk has, in red and to the right, "Delayed" with an "i" within a circle, and the option indicates, "Next backup: when disk is connected."
I know I have a years worth of backups on one of the three drives, but I can't figure out how the heck to find them or how to determine what was the last drive I used for the backups within Time Machine. Help please.

Does anyone know what software was used for Mac Welcome Video?

As you may remember when you turned your mac on for the first time, a ver neat welcome video played with upbeat music. Well I just wanted to know if anybody knew what program(s) was used to make it. If you know or have any idea please tell me. Thanks!

Hi and welcome to discussions. I tried to find something about it, but was not successful. I would guess though that this has been made using some of Apple's own software, everything else would not really make sense. And there actually is one tool in the portfolio capable of creating something like that: Motion. So, as an educated guess, I would say that's the one.

What was used here?

I was wondering what Adobe product was used to make the graphic on this page?..... http://direct.adobe.com/v?xlWcHcnEcccTHnH
Was it created from a product or created by a graphic artist freehand?

Yes, as we see in many cases the lines between vector and raster are blurred. (Speaking metaphorically) This could well have started out as photographic (raster) and been traced in illustrator (Vector). Not so much the entire image because it looks to be a collage of subjects. If I were tasked with reverse engineering this image I would use a combo of both Photoshop and Illustrator as I saw fit, which best utilized my level of current experience. There may be hundreds of ways to create a piece like this, from hand drawn marker comps which could be scanned, traced and touched up, to using a tablet in nothing more then Illustrator, but when creating I find it best to stick with what tools you are most effective with. My best guess is its final end user file format was illustrator. (but perhaps I'm just Illustratorcentric)

I'm stuck at the activation stage! I don't have the original sim card and I don't know what carrier it was originally on! How can I get into my phone?

I was wondering if there was any way of accessing my iPhone 4 without a micro sim card. I am currently at the activating section, and after it tells you to find WIFI, it says to enter a sim card. I bought this iPhone off of my friend and he took out his original sim card! I dont know what carrier he was using. Is there any way I can access the phone just to play music on it for now?

Buy a H20 Wireless micro SIM card off eBay for $.99. You can activate the phone/SIM from their website. H2O uses AT&Ts network.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

What are the tables used for ACR & Master data daemon job?

Hi Experts,
What are the tables used in the backend for ACR & Master data daemon jobs. I would like to see the details of CHANGERUNMONI or ACR/Hierarchy Change run.
Kr,
Praveen

Hi Praveen,
Have you tried these tables BALHDR, BALDAT and BALOBJT for checking master date daemon delta status. It may not give you complete details. but definitely helps.. If you find any more details please do let me know..
Thanks,
Bharath

I have a Windows laptop running with Windows 7 (64 bits). i was using itunes normally. Few days ago I upgraded to 10.5.2. When I completed download and install process, itunes opened and got stuck.It says "Updating itunes library". What can I do?

I have a Windows laptop running with Windows 7 (64 bits). i was using itunes normally. Few days ago I upgraded to 10.5.2. When I completed download and install process, itunes opened and got stuck.It says "Updating itunes library". What can I do?

Hi Drgeert-
The hub may not be broken per se, but Apple has made adjustments to the limits on current that can be drawn from ports.
You probably need a new hub.
These may be helpful and/or interesting:
USB: High Bandwidth and Isochronous Devices Must Be Separated
USB Product-Specific Details
Luck-
-DaddyPaycheck

What if HANA was used to process Large Hadron Collider (LHC) Data?

Similar Messages

Maybe you are looking for