What if Input and Record Ready buttons both enabled?

If I enable the Input button on a track, I can hear the output. If I disable the Input button but then enable the Record Ready button, I can also hear the output.
Is there ever a purpose for having them both enabled at the same time? I'm just trying to understand them better.
Thanks.

I try to clarify in a simple way:
The Input button is important during recording.
It is similar to analog tape recording process - you can listen to "signal coming to the Tape Head but before is recorded" and "just recorded and playing from the Tape" - so in first case you hear only the Input and in second you hear the Output. You can choose listening Pre Tape Head and Post Tape Head.
If you enable Input button the you can hear signal coming to the Input only and of you disable one you hear the sound read from disk.
First function is called: Input Only. Second one: Auto Input.
Why Auto ? Because your DAW system is automatically switching between :
1) INPUT - during recording and 2) OUTPUT - during playback.
For example: if you have just recorded the guitar part on Track no.5 and you want to correct some and record again but not whole part but only one region then select the recording-start position and to be accurate with rec-start point you need to pre-listen to a few seconds before start recording.
In 1) case you will hear only your guitar ready to record and in 2) case you hear what you've recorded before and in the moment when recording starts you immediately hear your ready to record guitar - DAW automatically switches to Input signal - so just play and record again selected region.
After pressing stop - listen to corrected region - in Play mode DAW always switches to playback mode and you hear only the Output. In Record mode you can choose between Input Only and Auto Input.
Hope be helpfull

Similar Messages

  • The red colored "record ready" button has disappeared  from my track header area. The other four buttons are showing fine, (input (i), hide (h), mute (m) and solo (s).

    The red colored "record ready" button has disappeared  from my track header area.
    The other four buttons are showing fine, (input (i), hide (h), mute (m) and solo (s).
    Can anyone help me with this?
    Thanks
    Johnny

    Ahrenshof: Thank you for your suggestion:
    ((preferences>audio>devices  (re-select your input source) ))
    I already had that done IE. I had duet already chosen as input and output etc etc.
    The problem seemed to be the issue that was addressed by Eriksimon:
    (( ctrl-click the track Header.))
    Following that advice gave me a drop down menu which allowed the various buttons to be
    checked and unchecked.
    Thanks so much for taking the time out to
    help with my problem. It seems to me that
    this formum is far better equipped to handle
    user's problems than any or the options that
    are available on the acual Logic help menu.
    It appears that Logic has been put
    together by techies who, (though they
    may be brilliant at computer software issues), then have
    virtually no skill or imagination with regards explaining
    how to use it, to the actual users.
    I have a PhD in Egyptology. I mention this not
    because I think it a particularly brilliant acheivement
    but just to indicate that I am not a total dummy.
    More to the point I find using Logic needlessly tiresome
    and the explanations that are given in the "Help" menu
    are nothing short of tragic. Perhaps Apple could start to give
    out free ropes or razor blades to everyone who buys the program.
    Not to say it is not much better that the other junk out there, it is,
    the sorry fact is that that is not saying much at all.
    I send sincere thanks to all the users out there who support
    each other through this forum. johnnyloonybin

  • Is there any String variable or something what have input and output data?

    Is there any String variable or something what have input and output data?
    Solved!
    Go to Solution.

    elefank wrote:
    I have a "A"String and i want to merge this "A"String  an other "B"String and I want to get it back to the "A" String 
    I would store the A String in a shift register and then you can use Concatinate Strings whenever you want to add the additional characters to it.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Sound input and recording

    Hello chaps,
    I'm considering buying a Macbook at the weekend, and have been conducting a large amount of research. But I've not been able to find out too much about the sound on the unit. As sound recording would be a primary function of the unit, it would be most appreciated if somebody with a helpful bone or two could answer me a couple of questions!
    Firstly, I understand the Macbook to have optical digital input and output.
    What sample rates and bit-depths will the digital input lock to (and output at)?
    Is it possible to have two separate audio applications recording from the optical input at the same time? What about the line input?
    With regards to the line input, am I correct in assuming this is solely a line-level input, and a standard dynamic microphone cannot be connected (i.e. it must be an amplified microphone)?
    And what about AirTunes? I quite fancy an Airport Express -- but understand this can only be used to stream music from iTumes. Is there really no way to have it receive and reproduce the actual "system" sound output?
    Finally, I use Adobe Audition to do my recording under Windows. Without splashing out on ProTools LE or BIAS Peak, is there a suitable piece of software I might be able to obtain for less money? I am aware of Audacity, but was looking for something perhaps a little more professional with a good multi-track editor. (I'm aware this might be outside the scope of this forum area!)
    If I do need to use Adobe Audition itself for some reason (perhaps dealing with a client's Audition Session file) I would be looking at dual-booting with Windows and transfering my licences for both Windows and AA to the Macbook; can anybody confirm that the audio I/O, both analogue and digital, works properly under Windows?
    Many thanks for your time.

    The digital noise is a factor of the number of bits. It is actually 6 * n, where n is the number of bits.
    So for an 8 bit signal, the noise is 48 dB down, about par for a cassette tape.
    16 bit is 96 dB down.
    24 bit is 144 dB down, which for all practical purposes, means that everything else (pre-amps, et al) are what affects the signal fidelity.

  • Perhaps silly, but, can Garageband take Dolby Digital 5.1 Input and record?

    Using the built in mini toslink on the Mac? Or, can it simply do stereo? I see no reference to digital, or, AC3, or, TOSLINK or anything else in the help.
    I have a music source that outputs dolby digital and want to be able to accept input from it.

    Didn't think so, have searched the net for products allowing me to use the digital input, have not found any yet. I see things like Handbrake that allow me to convert say MPEG2 movies with DD content, but, what allows me to input the content in the first place?

  • T30 freezing issues and Touchpad & Trackpoint buttons not working.

    Firstly I'll explain the freezing issue (this is now the 3rd time I've typed this, as the first two times my laptop froze before I finished!)
    I run my laptop with the battery at 100% and plugged in and that's fine; as is running it on battery. The problem arises when my battery is low and I plug it into recharge. Soon after it's running on a/c the screen will go black and only way to shut down is by holding the power button. If I try to restart it too soon, the indicator lights next to the power button will illuminate, but the screen will stay black. Usually after 5-10 minutes it'll boot to the IBM screen & boot the rest of the way, but not too long into normal operation it'll go black again (sometimes hitting ctrl/alt/del will bring the screen back but it would be very distorted (pixilized) and would go black again and reboot. What could be causing these problems while recharging the battery? I've tried this with a couple different batteries (both OEM IBM) and it does it with both.
     Secondly, both left and right "mouse" buttons are now nonfunctional (though the middle button of the track points works.) I have the latest version of Ultranav Wizard and all the buttons are enabled. The touch pad and trackpoint ball work fine, just the 2 left and 2 right buttons do not. What could be the culprit for this issue? Luckily I have a usb mouse so that's what I'm using for the time being.
    Message Edited by GoalieFergy53 on 02-14-2009 02:30 PM

    My T42p Touchpad and Trackpoint work fine however,
    the buttons are not responding properly.
    I'm forced to use an optical mouse to properly maneuver when working on
    the screen.
    When the well is dry, we'll all know the value of water.

  • No "Record Show" buttons on verizon website to control DVR

    New to FiOS, and also just had my box swapped out. I can control my DVR using my iPhone DVR Manager app, but I don't get any options to control it from the Verizon site. I see the 'How To Record a show from online' page describing the red buttons "Record" "Record Series", but I'm not seeing them on the pages I should be seeing them on.
    Anyone @ Verizon able to take a look?
    Thanks!

    dabido wrote:
    New to FiOS, and also just had my box swapped out. I can control my DVR using my iPhone DVR Manager app, but I don't get any options to control it from the Verizon site. I see the 'How To Record a show from online' page describing the red buttons "Record" "Record Series", but I'm not seeing them on the pages I should be seeing them on.
    Anyone @ Verizon able to take a look?
    Thanks!
    I just checked via the website and I see the Record and Record Series buttons just fine here. I know that several months ago some people had this same experience, after a few days the magically buttons re-appeared.
    Do you still have a problem?
    Justin
    FiOS TV, 25/25 Internet, and Digital Voice user
    QIP7232, QIP7100-P2, IMG 1.9
    Keller, TX 76248

  • Problem in using Step into and Step Over button in Test Stand user interface development.

    hi,
    I am developing operator interface in VC++
    currently I am facing a problem, I have created Teststand UI button controls dynamically on the dialog, I have assigned the buttons for break, Resume, Break all, Resume all, Step into and step over.
    Break, Besume, Break all , Resume all buttons are working fine, the Step into and step over buttons are enabling if I break the execution, but after breaking the execution when I click the Step into button I expect that the current step will be executed and, breaks at the next statement, but when I click the Step Into button It is behaving like resume button, I mean the executioin is going on till the end of the sequence file, it is not breaking at the next statement,
    Is my Step into button working the way it is supposed to be?, it is the same case with my step over button alsoI am connecting the TSUI button control to the execution view mgr in the  CTestExecDlg:nDisplayExecutionApplicationMgr(LPDISPATCH exec, ExecutionDisplayReasons reason)
    message funciton , and nothing I am doing nothing else, this is my code statement how I am connecting the button to the execution view manager. 
    mExecutionTab.m_pControlPtrArray[0].mExecutionViewMgr->ConnectCommand(mExecutionTab.MiscControls.m_StepInto,CommandKind_StepInto,0,CommandConnection_NoOptions);
    mExecutionTab.m_pControlPtrArray[0].mExecutionViewMgr->ConnectCommand(mExecutionTab.MiscControls.m_StepOver,CommandKind_StepOver,0,CommandConnection_NoOptions);
    Am I missing anything wrong? Can anyone please help me out.

    Al B,
    I'm not the original author of this post, but I have encountered a similar problem.  My C# application has implemented the following "debug" buttons that work just fine: Run All, Pause, Continue, Stop.  But my Step Over button causes the Sequence to run to completion.  When the user clicks on the StepOver button, only one line is executed:
              this.axExecutionViewMgr.Execution.StepOver();
    but it behaves like its calling
              this.axExecutionViewMgr.ResumeExecution();
    Can you offer any insight into this issue?

  • How to check the button Disable/enable property in openscript

    I am creating a test script using openscipt 12.2.0.1 and needs to verify whether a button is in disabled or enabled mode.
    I am trying below code:
    boolean enable=adf.commandToolbarButton(
    *125, "/web:window[@index='0' or @title=' - Collections Customer - Oracle Applications']/web:document[@index='0' or @name='13hipll5e2_1']/web:ADFCommandToolbarButton[@text='Pay' or @absoluteLocator='pt1:USma:MAnt1:pt1:TRX_FL:AP1:AT2:_ATp:ctb1']".exists();*
    if(enable)
    fail("Test failed");
    But this code is not working and Test failed for both enabled and disabled button.
    Please suggest the code which i can use for my scenario.
    Edited by: robi sharma on Apr 12, 2013 2:41 AM
    Edited by: robi sharma on Apr 12, 2013 2:42 AM
    Edited by: robi sharma on Apr 12, 2013 2:42 AM
    Edited by: robi sharma on Apr 12, 2013 2:43 AM
    Edited by: robi sharma on Apr 12, 2013 2:43 AM

    Hi Robi,
    Try this...
    String disabled = adf.commandToolbarButton("XPATH").getAttribute("disabled");
    if(disabled.trim().equals("false"))
        fail("Test failed");
    }If you want to convert your string to boolean use the following:
    boolean boolValue = Boolean.parseBoolean(disabled);
    if(! boolValue)
        fail("Test failed");
    }Regards,
    Deepu M

  • What will i do with my ipad stuck on white apple logo and itunes not recognized it. i'll always try to press and hold both the home botton and sleep/wake button but nothings happen.

    what will i do with my ipad 2 ios 5.0.1 stuck on white apple logo and itunes not recognized it. i'll always try to press and hold both the home botton and sleep/wake button but nothings happen.

    if that dose not work then you can always put it into DFU mode by connecting to your computer and holding down the home button and sleep/wake button for excatly 10 seconds and then relesing the sleep/wake button and keep holding down the homebutton till iTunes tells you it has detected an iPad in recovery mode then just do a restore

  • My Ipod touch camera's shoot and record buttons are not woking and the screen keeps freezing because of it. What to do?

    whenever i open the camera and click the buttons (in pic) the screen freezes and no picture is taken or video is made....Help please. I did try turning -the ipod off but nothing happened.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Sample rate off the audio input and out devices do not match - what to do?

    This is fundamental, I know, but nevertheless I can't find my way around it. I get this error message when trying to recor:
    Sample rate off the audio input and out devices do not match
    and am asked to do this:
    Use the appropriate operating system or audio device control panel to adjust the sample rates of the input and output devices to use the same settingt.
    I have defined the sample rate to 44.1/16 bit in accordance with my inbuild soundcardt.
    I am trying to record from LineIn.
    When running on a M-Audio sound card I don't face any problems.
    HP 8560W, sound card IDT/High definition audio Codec
    Any suggestions?
    Knud
    Copenhagen

    You're sure you have set BOTH the input and output settings to 44.1 16 bit?
    Which version of Windows are you running?  There are a number of posts on this forum about how to fully access both the Windows Mixer and the Mixer for your soundcard.  Especially, you need to ensure that all "Windows Sounds" are turned OFF.

  • Enabling and disabling the button in the multi record block

    hi all,
    i am using
    Forms [32 Bit] Version 6.0.8.24.1 (Production)
    Oracle Database 10g Release 10.2.0.1.0 - Production
    i have a multi record block each block contains a button(button is to approve the record in terms of changing the status)
    i have the items like date,remarks and button
    the button should be enabled if the remarks is not null otherwise it should be disabled.
    for this in pre-record trigger i have written
    if :record is null then
       set_item_property('button',enabled,property_false);
    else
          set_item_property('button',enabled,property_false);
    end if;what problem is enable and disable is impacting on all the buttons in the block. in other words if first record's remarks is null then all the records button is disabled. if first record's remarks column is not null then all the records of the button column is enabled.
    i have to make enable and disable the button for the corresponding record.that means if first record's remarks column is not null then only first records button should be enabled others should be disabled.
    Thanks..

    You need to set the No. of items displayed to 1 as Ammad had said, additionally you can set the X and Y Position (Just Y will do and having fixed X) of the button depending upon the current record.
    can u explain this part alone bit more (setting the position of x and y)You need to calculate the variable Y_POS depending upon the current position of the cursor that is the current record.
    You can find the current record Y_POS using combination of
    V_CURRENT_RECORD := :SYSTEM.CURSOR_RECORD;
    V_TOP_RECORD := GET_BLOCK_PROPERTY ('BLOCK_NAME', TOP_RECORD);
    V_ITEM_Y_POS := GET_ITEM_PROPERTY ('ITEM_NAME', Y_POS);
    -- Also needs to add the Y_POS of the relative other items in the muti-record block
    V_HEIGHT := GET_ITEM_PROPERTY ('BUTTON_NAME', HEIGHT);
    -- Note :- TOP_RECORD  Returns the record number of the topmost visible record in the given block.
    V_Y_POS := V_ITEM_Y_POS + ((V_CURRENT_RECORD - V_TOP_RECORD) * V_HEIGHT);
    -- You will need to add Distance between Items in records if anyThen you can Set the current Y_POS of the button.
    SET_ITEM_PROPERTY ('BUTTON_NAME', Y_POS, V_Y_POS);
    [/code[
    Hope this helps
    Best Regards
    Arif Khadas
    Edited by: Arif Khadas on Feb 24, 2011 4:58 PM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Where can I find and include the "record" radio buttons in Logic 9?

    Ok, I feel like a real dummy but for some reason when I installed the Logic 9 upgrade (upgraded from Logic 8) all the "record" radio buttons on the audio channel strips were missing. (They are there on the instrument channel strips.) Can anyone tell me how to get them back? I checked all the preferences I could find but somehow I'm not finding the one that will get me back my "record" radio buttons.
    Help!
    Mark

    They should be there on both. Only frozen SI tracks loose theirs (obviously), but my question earlier is irrelevant: even with no input selected there still ought to be a record button on the track header.
    OP: have you looked at the configuration of the track header? ctrl-click in it to find out.

  • Push Button in Multirecord block and Record Number

    Hi All,
    I have a push button in Multirecord block.
    for eg. there are 5 records in that block and cursor is on 1st record. if users pressess the push button on 3rd record (or other than 1st record) i want to get that 3rd record number. i am not able to get this. i checked :system.trigger_record, cursor_record, mouse_record values but it is not working correctly.
    what code should i write in when-button-pressed trigger to work it the way i want.
    can anybody help.
    regds

    Yes i got it
    Re: multi-record push button
    set mouse navigable property to true for push button and you get the :system.trigger_record value.

Maybe you are looking for