What image on 3750 to support VOIP?

i have a new 3750 switch that came with ipbase ios and i need an image to support voip. i looked for downloads on the cisco site but none of the image names told me which support voice. any ideas?
thanks in advance.

Hi
Switches don't directly need to support any 'voice' features like routers do - they simply need to be able to run QoS, supply VVLAN info via CDP and so on.
All these things are standard features on all images (Base, IPServices and Adv IP Services).
The extra features in non-base feature sets are mainly to do with dynamic L3 routing.
So, in short, your IPBase IOS is fine. If you want a different feature set the upgrade is licensed anyway so you should by a feature license (which is quite expensive).
Regards
Aaron
Please rate helpful posts...

Similar Messages

  • What Image of 3750 supports VRF lite?

    Folks,
    I want to implement VRF lite in my network, we have a bunch of 3750's in out network at the edge. Cisco doc says that 3750 support vrf lite, but i tried to download
    Base
    ip services
    advanced service image
    for the 3750, and i still do not see the VRF lite commands?
    Any ideas?

    According to the IOS Feature Navigator, any EMI image from 12.1(11)EA1 supports VRF lite.
    Please refer to the following URL to access the IOS Feature Navigator:
    http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
    Hope this helps,

  • What type of image files can java support?

    I there I'm trying to figure out what type of image formats does java support. Am I right in thinkning that it only supports:
    BMP
    JPEG
    GIF
    TIFF

    I there I'm trying to figure out what type of image
    formats does java support. Am I right in thinkning
    that it only supports:
    BMP
    JPEG
    GIF
    TIFFyup...i think thats about more than enough for normal users right?
    correct...

  • How to convert images which is not supported by the ImageIO?

    I have made one project.
    In that i have used some images and render them on some screen.
    Now there are many images which is not supported by the ImageIO class bcz its showing me exception like
    javax.imageio.IIOException: Unsupported Image Typeso what to do to render this images or can i convert this kind of images to supported images?
    is there anything which can render this kind of images.
    Edited by: Nitz_09 on May 24, 2010 2:12 AM

    CR2 files from which Canon camera?
    Supported cameras are listed here
    Camera Raw plug-in | Supported cameras

  • How to configure cat 3750 to support ssh2

    hey,
    I'm trying to configure, my catalyst 3750 to support sshv2 im running IOS c3750-ipbasek9-mz.122-25.SEB2.
    what commands do I need to enter on the Switch? I got a pdf from cisco showing how to do it. but I don't quite understand it. Right now my switch is just using telnet. I want to configure it to support telnet, sshv1 or sshv2.
    Also all the switches use tacacs as well
    thanks alot!

    This should do it..
    aaa new-model
    username cisco secret cisco
    hostname
    ip domain name
    crypto key generate rsa (this one is interactive)
    line vty 0 4
    transport input telnet ssh
    SSHv1 or SSHv2 is dependant on which version of the IOS you use...
    Check this document:
    http://www.cisco.com/en/US/tech/tk583/tk617/technologies_tech_note09186a00800949e2.shtml

  • How can i control what images load on my project to save preload time and avoid loading all images, elements, divs not yet visible?

    Sup buddies,
    How can I control what images load on my project to save preload time and avoid loading all images, elements, divs not yet visible?
    As the project grows in size the load time increases. How does one control not loading all images ,divs,elements etc. until they're
    needed on the timeline? For example some sections are off and only become visible when recalled. My projects slowly grow in size so loading
    all images , is counter productive . My other option would be to create separate htmls but that breaks the seamless user experience .
    TY...Over N Out... 

    hello, kiwi
    quote: "Is there an easy way to burn a completed project to DVD, but keep only the (lo res, lo size) previews on my hard drive?"
    yes.
    maybe,...
    1. you might think of making DVD backups first prior to importing the photos into Aperture. "Store Files: In their current location" once in Aperture make low rez Previews, and export finished Project.
    or,
    2. bring in the photographs to hard drive first prior to importing the photos into Aperture. "Store Files: In their current location" once in Aperture make low rez Previews, and export finished Project.
    the low rez Previews will stay in Aperture but the high quality Versions will be exported onto DVDs and gone from the hard drive (if you delete the originals).
    another way would be to export small about 50-70 pixel wide high quality jpegs to a folder on your Desktop and import & keep these in Aperture Library as a reference. make metadata to show where the original Project DVDs are stored and DVD filing system used.
    victor

  • What version of SQL Server support ssl connection with TLS. 1.2 (SHA-256 HASH)

    Hi,
    I just want to know,
    What version of SQL Server support ssl connection with TLS. 1.2 (SHA-256 HASH).
    if support already,
    how can i setting.
    plz.  help me!!! 

    The following blog states that SQL Server "leverages the SChannel layer (the SSL/TLS layer provided
    by Windows) for facilitating encryption.  Furthermore, SQL Server will completely rely upon SChannel to determine the best encryption cipher suite to use." meaning that the version of SQL Server you are running has no bearing on which
    encryption method is used to encrypt connections between SQL Server and clients.
    http://blogs.msdn.com/b/sql_protocols/archive/2007/06/30/ssl-cipher-suites-used-with-sql-server.aspx
    So the question then becomes which versions of Windows Server support TLS 1.2.  The following article indicates that Windows Server 2008 R2 and beyond support TLS 1.2.
    http://blogs.msdn.com/b/kaushal/archive/2011/10/02/support-for-ssl-tls-protocols-on-windows.aspx
    So if you are running SQL Server on Windows Server 2008 R2 or later you should be able to enable TLS 1.2 and install a TLS 1.2 certificate.  By following the instructions in the following article you should then be able to enable TLS 1.2 encryption
    for connections between SQL Server and your clients:
    http://support.microsoft.com/kb/316898
    I hope that helps.

  • How do I spot what images are RGB using the separations preview?

    2 Questions: 1. How do I spot what images are RGB using the separations preview? 2. Is there an easy way to convert those to CMYK without opening each one in PS? I did this before all the time but I'm rusty and can't remember how I did it. I'm on CS6.

    You can one of several methods to find out:
    (1) You can use the Links panel.  Open the Links panel. Go the panel menu and choose Panel Options. In the Panel Options dialog, Under Show Column check "Color Space". Now when you view your Links panel it will show the color space of all linked images.
    (2) You could use Preflight, and set up a Preflight Profile. In the profile, go to the Color section > Color Spaces and Modes Not Allowed, and check RGB. Then any RGB images would be flagged.
    (3) If you need to know BEFORE you place the images, use Adobe Bridge. Open the folder where the image are. Use the Metadata panel and view the color space of the images.

  • I contacted what I thought was Brother Support for my new printer, then I got skeptical.  He gained access through a program called TeamViewer, is my Mac safe?

    i contacted what I thought was Brother Support for my new printer, then I got skeptical.  He gained access through a program called TeamViewer, is my Mac safe?

    They're probably just interested in getting $ from you, there are several companies who advertise in a way that suggests 'official' support for all sorts of things. Unfortunately, if they had access as you describe, they potentially could have installed other software and/or read any of your files.
    Ideally - change all passwords for email/banking/login & restore a backup from before this happened.

  • For CRM 5.0 what is the ECC version supported

    Hi,
    Can any one help on this
    For CRM 5.0 what is the ECC version supported?

    ECC 5.0 onwards,
    lower versions can also be integrated using some plug-ins
    hope this helps
    additional info:
    SAP ECC 6.0 and subsequent releases will automatically contain all integration interfaces that so far have been contained in the SAP R/3 Plug-In and that ensured the technical integration with other SAP Components.
    Customers who run SAP R/3 4.6C, SAP R/3 Enterprise 47x100 and 47x200, and SAP ECC 5.0 will receive additional integration interfaces in a Support Package for PI 2004.1. The delivery of this Support Package will be synchronized with that of mySAP Business Suite. The 2005 delivery is in November as part of Support Package 10. Information about the delievery from 2006 onwards are take place here
    This rule applies only for customers with a SAP R/3 Plug-In release PI 2004.1. Customers with PI 2003.1 or older must first upgrade to PI 2004.1 or SAP ECC 6.0.
    No new interfaces will be provided for integration between new SAP component releases and SAP R/3 3.1I to 4.6B.
    Message was edited by: RH

  • What versions of WSDL are supported?

    What versions of WSDL are supported? Esp is WSDL 2.0 is supported?

    I could be wrong here but from my understanding only 1.1 is supported in terms of version in the current 10g release of the SOA suite. I believe the 11g version will be very up to date and support WSDL 2.0

  • What Raw camera files are supported by Aperture Ver 3.6.  I have tried to file a list of compatible camera models, but as yet can't find one.

    What Raw camera files are supported by Aperture Ver 3.6.  I have tried to file a list of compatible camera models, but as yet can't find one.  My OS is OS X Yosemite 10.10.1.  I have recently bought a Canon 7D MkII and have found Adobe Lightroom does not as yet support the 7D MkII.  So I though Aperture may support the 7D MkII because Yosemite 10.10.1 now does.

    Hi Folk,
    I just found the answer to my question.  Yes it is supported with OS X Yosemite 10.10.1.  See the link below and the ***** Note at the bottom of the list.
    http://www.apple.com/aperture/specs/raw.html

  • What image size for full page photo?

    What image size is required to be able to create a single full page photo in an iPhoto book?
    I shoot in RAW and use Lightroom for most of my photography. However, for family pictures, I'd like to create an iPhoto book. I exported from Lightroom as 100% quality jPEGs / at 320 dpi / small side 2000 pixels -- but I still get a triangle warning that this is not big enough for a single photo page. What dimensions/resolution is required to put one photo on a page?
    By the way, would you recommend jPEG? I tried TIFF and while those file sizes much larger, I still get warning triangle?
    Finally, when I re-import to the new size that someone hopefully will recommend, how do I delete my old (too small) images in iPhoto?

    AEPC
    Welcome to the Apple user to user assistance forums
    In iPhoto '08 & '09 the warning comes on if a photo is below 180 dpi - so for 8.5 x 11 you need a minimum photo size of 1530 x 1980 pixels - and remember is you zoom or crop the photo in the book the area you actually printing must be that - not the original sized photo
    The format of the photo (TIFF or JPEG) makes no difference in the warning symbol only the pixel size
    LN

  • What level of Elements will support Olympus OMD-M-5 Raw Files (.ORF) ??

    What level of Elements will support Olympus OMD-M-5 Raw Files (.ORF) ??

    Yes it is the OM-D E-M5 Newly purchased. Love the camera but don't like the Olympus software.
    I have Elements 7, but have previously been a Canon user and have hitherto used Canon DPP software to process my CR2 Raw files.

  • What does the RunTime engine support?

    Hello,
    Does anyone know what functions the RunTime engine supports? Or is there a
    NI link I can follow. Some goodies like the VI server don't seem to be
    supported in RTE 5.1.
    6i any different?
    Thanks
    Martin

    I know about the paths, but I had problems with getting the username with
    the Open application reference, an error came up 'function not supported'
    and a pointer to the VI that caused it.
    It's my mistake to say the VI server was not included. But are the
    Application properties (web etc) included ?
    Thanks
    Martin
    "Dennis Knutson" wrote in message
    news:[email protected]..
    >
    > I use VI server with the run time engine all the time. When you build an
    app,
    > you have to specify which vi's are called dynamically so that they are
    included.
    > Paths parse out a little differently too when you've got a built app.
    Sometimes,
    > all it takes is an extra Strip Path.
    >
    > "Martin E" wrote:
    > >Hello,>>Does
    anyone know what functions the RunTime engine supports? Or
    > is there a>NI link I can follow. Some goodies like the VI server don't
    > seem to be>supported in RTE 5.1.>6i any different?>>>Thanks>Martin>>

Maybe you are looking for