What in the heck is going on???

So i looked all around these forums and found that i am the only one to be experiencing this problem. It is a long story so i better start from the begining.
OK so i was having a problem with my limewire it kept opening it self up. the forums that i looked at told me that i had a worm in it.so i did a system restore because i couldn't run my anti- virus or open my task manager. I did that and limewire seems to be working fine i was able to open my task manager but still not my anti-virus. so i thought that i would reinstall it... nothing it kept saying that not all files were properly installed. I left it be. Then one day i went to oopen my itunes and it said the same thing that some files weren't properly installed please reinstall. so i tried to and once i did it said the same thing. My quick time isn't working either and when i go to install it, the installshield doesn't pop up...
so i am completly boogle.
anyone out there know what is going on and if you do can you tell me how to fix it in a idiouts guide mannor thanks

so i did a system restore because i couldn't run my anti- virus or open my task manager. I did that and limewire seems to be working fine i was able to open my task manager but still not my anti-virus.
i'm not convinced that the System Restore got rid of your worm. if it disabled your antivirus and other security software, you might have been picking up secondary infections for a while now.
the priority here is probably getting the PC clean. it might be a good idea to head to a specialist malware-removal help forum for assistance with that. there's a list of forums at the end of this doxdesk document:
doxdesk: other sites about parasites

Similar Messages

Communication Error (-8).....WHAT IN THE HECK IS GOING ON???

One night i was talking to my friend, Phil, (who also has a macbook) perfectly on iChat AV and it was wonderful. The next night i tried again and it wouldn't work with him or my non-macbook friend, Danielle, but only with a different macbook friend, Cheryl. Now I can't connect with anyone outside of my network. I have only been able to connect to my friend David (I give names so that you ar able to differentiate between who is who). However, David is currently living in my house and is therefore in my network so of course i am able to video chat with him.
Everytime i try i get the same "communication error -8". I have tried various solutions i've found in the forums, but nothing seems to help at all. I've also noticed that A LOT of people are having this same problem and am wondering if perhaps it is a manufacturing error that started at the beginning in the factory when it was being made, but i'm probably wrong about that.
Can anyone tell me if they no the solution to this problem?? HELP!!!!!!!!

Please remember you gave me permission to do this.
Ok most routers or modems have certain ports open so that it works out of the box for Web Browsing and Mail applications.
These ports are sort of virtual and inside the device. Your computer also has them.
So Web browsing happens on port 80 that you may have heard of. Mail can be on several for in and out purposes and for the different types of Mail accounts you can have (POP or IMAP) (port 25, 110, 995 or even 443)
Now there are in fact 65535 of these ports. So other applications and certain different internet protocols use these ports. On line games is one reason. These can use multiple ports for one game.
Now from there routers and modems need the ports above a certain threshold to be opened when you want to use them.
This threshold is port 1024.
Now how these ports are opened on different devices can vary.
Port Forward (or a variation name like Virtual Servers or Pinholes) is the oldest and most common.
This allows you to point one port (or sometime s a range) to a corresponding port(s) on your computer.
An example would be to point port 1024 to port 1024 on your Computer.
This method would only allow this to one IP (your computer) on the LAN.
(Hence the original question - Are you doing this ?)
There is normally a table if you need to open more ports for one Application
Next comes DMZ (Demiltarized Zone) This is a means of opening all the ports to One IP (Computer) Not considered secure, but useful for testing. Consider it an extreme form of Port Forwarding.
Next come Port Triggering.
This uses One port up front so to speak that then openes other ports. It has the advantage that multiple computers can use the ports at the same time.
Then comes UPnP (Universal Plug n Play) This gives control to the applications to open the ports when they need them. (they close after a timed period of Non use).
Again multiple computers can use the same ports at the same time.
Not all routers or modems that route have all methods although some do.
Then we come on to iChat.
This uses 29 ports (for AIM Login, File sending, Text chats, A/V chats, the Jabber side and the Bonjour side) over two protocols (total of 31 entries in some cases)
These ports are above the 1024 threshold and some are particular as Apple has said iChat is a VoIP application.
Most devices that route can be controlled by yourself and have default ways to access their set up pages via a web browser.
This will involve an IP typed into the web browser which will bring up a Pop Up asking for a User ID and (Or at least ) a password.
This site http://portforward.com/routers.htm list many devices.
Clicking on yours and then iChat in the next page will take you to a device and application specific page.
It is obviously then goes on about Port Forwarding settings.
However the pages are useful for the default access info.
Once you have gained access it is a question of checking the menus to see it does UPnP. ( It is a one stop enable/disable setting and allows multiple computers)
Consider a router without the ports open as a hardware firewall.
It may allow outgoing stuff giving you intermittent looking results.
If you tell us which device you have then we can point you to a more specific solution.
Networking in general.
Most of these devices do what is called DHCP. It is not so important about what the name means other than it means the device gives out IP numbers (Addresses) to your computers.
However it is not good networking to have two devices doing DHCP.
There is more on this subject but that is enough for now.
8:17 PM Wednesday; August 22, 2007

I am home sharing songs from my computer (library) to another authorized computer (library), the songs will import, but once i sync the iphone (4s) to this computer the songs are shaded and will not import onto the iphone, what the heck is going on?

I am transfering songs from one computer to another using home share. Both machines are authorized in home sharing. The songs import from (my) windows computer to the other (my wifes) authorized MacBook Pro, computer just fine. Once the songs are in the library and i try to sync her Iphone (4s) to her computer the songs ar greyed out and i can't play them nor see them under iPhone after sync is complete. What the heck is going on? BTW, the songs that i have imported are either songs i burned from a CD or songs i have purchased from the iTunes store, so they should sync no problem!? Help please.

screen print of issue...

CS6 has been converted from the upgrade I bought to a trial version. What the heck is going on.

I upgraded from CS5 to CS6 for my IMac. I downloaded CS6 and out in my serial number and it worked fine for a number of weeks. Suddenly when I went to use it it said it was a trial version. I had to register it to use my CS6   I registered it and it worked, but only as a Trial Version of CS6 Extended. I do not want CS6 Extended. I deleted the trial version of CS6 Extended from my hard drive and once again downloaded my upgrade of CS6 and put in my serial number and it worked fine for a couple of weeks. Today, once again, it tells me it is a trial version and will not load unless I register the trial version. What the heck is going on? This is crazy. I simply want to use CS6, for which I paid. Help!
Frank Brault

Thanks!
Date: Sun, 30 Dec 2012 12:49:52 -0700
From: [email protected]
To: [email protected]
Subject: CS6 has been converted from the upgrade I bought to a trial version. What the heck is going on.
    Re: CS6 has been converted from the upgrade I bought to a trial version. What the heck is going on.
    created by Dragoro21 in Photoshop for Beginners - View the full discussion
Its a bug that came with the latest update. The developers know about it and will fix it as soon as they get back from christmas vacation. Lots of us (inluding some of the developers) are suffering the same problem.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4957602#4957602
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4957602#4957602
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4957602#4957602. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop for Beginners by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

None of any of the pictures on Facebook can be opened and seen on the website, I have absolutely no problem on Safari, but I would much rather use Firefox..What the heck is going on????

About a week ago, I had no problem clicking on pictures to open them to bigger size.....As of about 4 days ago - If I try to open a picture on Facebook, it shows the comments but no picture..I don't know what is going on!!! It works fine on Safari, but I would much rather use Mozilla for my own selfish reasons, WHAT THE HECK IS GOING ON????? ( I'VE TRIED EVERYTHING!!!!!)
== This happened ==
Every time Firefox opened
== About a week ago.....

I agree the phones are supposed to come with the battery and battery door missing that is policy of every wireless company. The problem is that the rep that you spoke with wasn't being as thorough as they could have been to ensure that you got complete equipment, is was a processing error from the first representative. Most of the information for exchanging a phone is auto completed by the computers as well so when the rep processes the exchange they don't have any say so as to what is actually in the shipping box so being that you didn't activate the droid 3 on your account when you called in about the missing battery and complained the computer only recognized the droid x because that probably what you had activated on your account, so that's why the second replacement was droid x equipment and not droid 3

What the heck is going on with TV Shows?

Wow the descriptions of the shows are non-existant before you buy them, are listed as "albums" (bug?) and what the heck is going on with shows taking forever to make it to iTunes after they air??? It's killing the experience for me... three days to a week? Who's messing up, ALL the networks or Apple?

All I can tell you is Apple is dependent on the networks to provide the files. If the network isn't prompt in providing said files, there is not a lot Apple can do.

What The Heck Is Going On Here? Do I Need a Scan And How?

Okay my friends, maybe some of you could give me a clue what the heck is going on.
For the first time EVER, I keep getting this dialog box cropping up. It says something like Motorola Phone on top of the dialog box, and Incoming File Transfer for what seems to be a JPG image...Like HUH????????
I've had my own computer for over a year now and never got such a thing before. I click the decline button each time it crops up. How do I get rid of this annoying thing..I don't dare accept and open it since I don't even know what the heck it is.
Anyone ever get this?? Anyone have a clue what this is? It's friggin annoying...want to get rid of the darn thing but wouldn't know how..like I said I've never gotten this before.
Now I know Macs aren't supposed to get viruses and some of my PC user friends have suggested that maybe I try to get a virus/spyware scan and directed me to a few freebie places...I just don't like the idea of downloading anything and particularly from a freebie place
If any of you do have any kind of freebie scans that you have used that you know are to be safe could you tell me which?
I did shut down my computer then rebooted...hoping whatever kinks I may have gotten may have resolved itself

In the right conditions, Bluetooth can work up to 30 feet, and through walls. It can't do anything unless you let it. Look in the "Bluetooth" system preference. See if anything shows in the left column. If so, you can select it and see information about in in the right column. Click on the gear at the lower left to see if there is an option to ignore that particular device, or if you aren't using Bluetooth, you can turn it off with the upper-left checkbox.

OMG - I am getting nonstop iCloud password verifications on my iPhone? What the heck is going on?

OMG - I am getting nonstop iCloud password verifications on my iPhone? What the heck is going on?

My be phishing. Don't respond or click on any links if you didn't request a password reset. You can contact the Apple account security team to confirm whether or not it's coming from Apple: http://support.apple.com/kb/HT5699.

Same thing. ConnectionManager::invoke:: failed to find service connection URL" what the heck is going on!!

I was watching a program and got Connectionmanager::invoke:: failed to find service connection URL"
I am pretty steamed. What the heck is going on??

Same problem for me. I have tried logging out, adding a new account to no avail.

My PowerMac G4 smells like burning plastic -- what the heck is going on!?

I have experienced the burning smell before, but almost a year ago. Yes, my machine is eight years old, but I still love her and have been doing whatever I can to keep her alive. The only major surgery I've done, is switched from the Samsung power supply it came with, to a lower powered Apple one. It had been running fine (and quieter since the power supply switch) until today. I powered the computer ON, left it for maybe 20 minutes, and when I came back, the first floor of my house wreaked of burning plastic/electronics. I shut the computer down and left it off for about four hours. Powered it up again recently, worked fine, BUT still emitted that burning stench (though can't tell if it was just blowing around the smell from before or heating up again...).
Does anyone know what the heck is going on with my beloved PowerMac G4 (mirrored drives)? I already purchased a used PowerMac G5 as a backup -- just in case I have to pull the HD from my G4 and move on -- BUT any help to fix my G$ would be most appreciated. Thanks. Nv

Nick,
The first thing to do is to trace the smell if you can. The most likely source of heat is the power supply. If a capacitor leaked somewhere the computer might not work but my money is on melting wire insulation. The wire would still let power get to components but smell of hot insulation, thus it works but smells.
If you are careful, you can remove the power supply from the computer and open it up to take a look inside. If you have a spare CD-ROM drive, you can plug it into the power supply just by itself. Take a paper clip and short out between the green wire and a black wire on the motherboard molex connector (the rectangular one with the most wires going to it.
What you will have on your work bench is the cord from the wall outlet to the power supply, the power supply itself with the cover off, the paper clip jumper and the CD drive. If the paperclip is in place, the fan on the power supply will turn on. The tray for the CD drive should open and close. That will tell you if the power supply is working. If it also starts smelling, then you have isolated the problem.
If the smell comes from any place else, look for signs of melted plastic. One would hope that a fuse would blow before wires short out because the heat is a sign of high current draw.
Try that much and post back.
Jim~

ICal/10.5 What the Heck is going on?

We can no longer publish to .Mac
Now all my events on my iPhone are one hour later than all the events on my Powerbook.
Have restored my iPhone, have exported and imported the events..
...and still nothing is right
What the heck is going on!!!!!!!???????

I'm sure that Apple is working on the publishing issue as it is huge - and everyone is complaining about it. Regarding the time - sounds like the time zone on the phone was not correct or a daylight savings option was not checked etc. I don't have an iPhone to be able to tell you where to look - but since iCal isn't syncing to .mac or to peoples phones, the time issue is most likely not iCal.

Flash player, what the heck is going on I seriously need this for my iPad

Flash player, what the heck is going on I seriously need this for my iPad, just about every thing you look up on the Internet, asks you to download the adobe flash player??????????

Old news...
http://www.apple.com/hotnews/thoughts-on-flash/

What are the objects that goes inactive after Transportation

Hi,
Usually,What are the objects that goes inactive after Transportation?
If you have any links for tranportation ,please send.?
Regards.,
Naresh.

HI,
the main reason for most of the transports to fail is:
1)Transporting each and every object in the same transport request.
Ideally,
u2022The Infobjects should be transported first in a separate request.
u2022Then the Data source and the Info providers (Cube, ODS, Data source and Multiproviders) together in a separate request.
u2022At the end the transformations and the DTPu2019s in an another separate request.
If the above mention sequence is followed while transporting the transport failures can be avoided.
2)Also when a change is made to an ODS (I object added or deleted) it should again be transported along with the transformation but in separate request.
I.e. the ODS 1st and the transformation.
Hope this helps.
regards,
mahesh.

What the Heck is going on with 10.5.2? . . . Part 1

Part 2: Is a huge list of all kinds of weirdness that follows this, but . . .
For the longest time 10.5.2 was flawless and I thought +"I'm home!"+ Then my machine started freezing at sleep and then the Part 2 of things started to happen that I am seeing many others doing through. Then the other day the Energy Control Panel just disappeared. I looked at it earlier in the day and later I was restoring my laptop from a partition on my main machine and wanted to make sure that it didn't go to sleep/freeze during. So I went to the Energy Panel to make sure it was set it to "never" and it was not there. Just Plain Gone. Just earlier I have it set just to make the screens dim and I can make it sleep manually when I know I will be done for a while. So I saw it and it was there. But a restore via TM of the ES PP the screens didn't dim, and the screen saver that is turned off, came on. What!
This install of 10.5.2 was done so very carefully and more meticulously than any install in my life. Been using Macs since the late 80's. There are just a couple of apps installed that have been there and all worked great for many weeks. Then all of a sudden freezes and then System Prefs Panels start disappearing. What's next . . . . Oh that's Part 2. I need to get this Sleep thing dealt with before I transcribe my notes. But I will. I know, +"Oh, Joy!"+
I spend more time messing with keeping this thing running now than using it. I have to make a recommendation for a start up organization that has an obscenely large budget and I can spec anything I want. But if this is the way OSX is going to be, I'll go XP. At least all the complications will be expected and potentially addressed.
Anyone having the same problems or found the culprit? Please no "mines fine comments". Remember this is a place to find fixits, not comments for comments sake.
Any assistance will be greatly appreciated by me personally and Apples Third Quarter Profits.

TheGuyintheProjectionBooth wrote:
That's what this was. A very meticulous virgin reinstall, more so than any other install I have ever done in 18 years. With the worst results of any of them. And then what's the use of TM then? IF you can't recover any file you need. Supposedly the file being from a previous and "cleaner" install, it should be safe and clean. If not and not advisable to pull form, then why TM at all?
Time Machine is meant to restore your own documents or a full system restore. You are not supposed to replace random parts of the operating system using Time Machine or any other means. You don't know what caused your problems. You don't know if your problems are specific to a specific user on your machine.
What is the point of doing a meticulous virgin install and then hacking it up?
It's obvious that there are still major holes in 10.5.x. Of which I am hearing from many third party vendors that I am trying to get updates from. So if they see it, they're there. I am very curious to see how large 10.5.3 will be. I read the list of fixes is quite large and getting larger.
Does this mean you will do what so many others have done and hope that 10.5.3 is going to magically fix your problems? Guess what - if your machine is flaky, installing an update is only going to make it worse.
As soon as I can get at least level with the tide, I will post Part 2, I have to sort through my notes, which is a list of all the things that have gone wrong.
Until then . . . . arm yourselves. I know you'll want to retort.
Perhaps not. If you're going in and hacking up your machine, it is pointless to try to diagnose problems due to any number of unknown problems you may have caused yourself.
Also, I took the time to read your post and ask some very specific questions to which you didn't bother to respond. Why would I respond to your Part 2 if you wouldn't meet me halfway on Part 1?

What the heck is going on with my Virtual Memory??!!

I'm not really sure why but when I check activity monitor and see my VM it says i'm using anywhere from 230-270 gigs of virtual memory. This is literally fresh out of restart when it says this much and never changes. I go through and check every process I see runing and create a quick estimate of the virtual memory being used, and it's definitely not over 10 gigs if even 5; honestly I think it's listing between 1-2.
What the heck could be causing this? Verified HD and came up clean. Should I be concerned? I'm not gonna lie this macbook isn't running the best it used to be. Watching videos, whether mp4, mkv, youtube, is pretty laggy. I'm aways sure to close all other processes to to try and maximize video performance, not that it helps much. I'm considering a fresh install and recovery via timemachine.

I excluded the list of fonts from step 4 as I'm a graphic design major and have well over a thousand...and I didn't want you to burn up your scroll wheel or rub the tips of your fingers off with the amount of scrolling you'd have to do had I included them .
Command 1:
com.displaylink.driver.DisplayLinkDriver (1.7)
com.rogueamoeba.HermesAudio (3.0.1)
com.Cycling74.driver.Soundflower (1.5.1)
com.bresink.driver.BRESINKx86Monitoring (7.0)
com.logmein.hamachi (1.0)
foo.tun (1.0)
foo.tap (1.0)
Command 2:
com.autodesk.backburner_server
com.autodesk.backburner_manager
net.openvpn.client
com.vmware.launchd.vmware
com.themha.airlock.daemon
com.rogueamoeba.hermes
com.logmein.hamachi
com.google.keystone.daemon
com.displaylink.usbnivolistener
com.bombich.ccc
com.autodesk.wiretapgateway
com.autodesk.sw_start
com.autodesk.sw_server
com.autodesk.sw_probed
com.autodesk.sw_dbd
com.autodesk.sw_bwmgr
com.autodesk.dl_mpd
com.autodesk.backburner_start
com.autodesk.adlm
com.adobe.versioncueCS4
Command 3:
com.wacom.pentablet
com.lexmark.hostregister
com.lexmark.hostinfoupdater
com.lexmark.hbnlistener
com.google.keystone.root.agent
com.displaylink.useragent
com.adobe.CS4ServiceManager
com.google.GoogleContactSyncAgent
com.adobe.ARM.930da3ce175de4e82bd3cdf1dd8571f74bd3b6a7236bc94bfc00f6e9
com.adobe.AAM.Scheduler-1.0
Command 4:
/Library/Components:
XiphQT.component
/Library/Extensions:
ham.kext
/Library/Frameworks:
.DS_Store
AECore.framework
AEProfiling.framework
AERegistration.framework
Adlm.framework
Adobe AIR.framework
AudioMixEngine.framework
Cairo.framework
Compressor.framework
DSPPublishing.framework
DivX Toolkit.framework
EWSMac-GC.framework
EWSMac.framework
Frameworks
FxPlug.framework
GLib.framework
Gtk.framework
HPDeviceModel.framework
HPPml.framework
HPServicesInterface.framework
HPSmartPrint.framework
Jackmp.framework
Jackservermp.framework
MacFUSE.framework
MediaServerAPI.framework
Mesh3DS.framework
Mono.framework
NyxAudioAnalysis.framework
OpenVPN.framework
Panda.framework
PluginManager.framework
ProMetadataSupport.framework
Python.framework
Qmaster.framework
TSLicense.framework
WacomMultiTouch.framework
XSKey.framework
libZJBIG.dylib
libxml.framework
/Library/Input Methods:
/Library/InputManagers:
Safari AdBlock
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
CANONiMAGEGATEWAYDL.plugin
CANONiMAGEGATEWAYLI.plugin
CouponPrinter-FireFox.plugin
CouponPrinter-Safari.webplugin
DivXBrowserPlugin.plugin
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
Flip4Mac WMV Plugin.webplugin
Google Earth Web Plug-in.plugin
JavaAppletPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
Silverlight.plugin
Unity Web Player.plugin
Unused
WacomNetscape.plugin
WeatherScope.plugin
flashplayer.xpt
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
npdivx.xpt
npgtpo3dautoplugin.plugin
nsIQTScriptablePlugin.xpt
/Library/Keyboard Layouts:
/Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.CS4ServiceManager.plist
com.displaylink.useragent.plist
com.google.keystone.agent.plist
com.lexmark.hbnlistener.plist
com.lexmark.hostinfoupdater.plist
com.lexmark.hostregister.plist
com.wacom.pentablet.plist
/Library/LaunchDaemons:
com.adobe.versioncueCS4.plist
com.apple.aelwriter.plist
com.apple.qmaster.qmasterd.plist
com.apple.remotepairtool.plist
com.autodesk.adlm.plist
com.autodesk.backburner_manager.plist
com.autodesk.backburner_server.plist
com.autodesk.backburner_start.plist
com.autodesk.dl_mpd.plist
com.autodesk.sw_bwmgr.plist
com.autodesk.sw_dbd.plist
com.autodesk.sw_probed.plist
com.autodesk.sw_server.plist
com.autodesk.sw_start.plist
com.autodesk.wiretapgateway.plist
com.bombich.ccc.plist
com.displaylink.usbnivolistener.plist
com.google.keystone.daemon.plist
com.logmein.hamachi.plist
com.rogueamoeba.hermes.plist
com.themha.airlock.daemon.plist
com.vmware.launchd.vmware.plist
net.openvpn.client.plist
org.macports.Privoxy.plist
/Library/PreferencePanes:
DivX.prefPane
Fan Control.prefPane
Flip4Mac WMV.prefPane
MacFUSE.prefPane
PenTablet.prefPane
VersionCueCS4.prefPane
/Library/PrivilegedHelperTools:
com.bombich.ccc
/Library/Privoxy:
privoxy
/Library/QuickLook:
BrushViewQL.qlgenerator
GBQLGenerator.qlgenerator
LogicQLGenerator.qlgenerator
VMware Fusion QuickLook.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleHDVCodec.component
AppleIntermediateCodec.component
AppleMPEG2Codec.component
AppleProResCodec.component
CanonMJPEGAVI.component
CanonMJPEGAVIDec.component
CanonText.component
DVCPROHDCodec.component
DVCPROHDMuxer.component
DVCPROHDVideoDigitizer.component
DVCPROHDVideoOutput.component
DVCPROHDVideoOutputClock.component
DVCPROHDVideoOutputCodec.component
DesktopVideoOut.component
DivX Decoder.component
DivX Encoder.component
FCP Uncompressed 422.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
Google Camera Adapter 0.component
Google Camera Adapter 1.component
IMXCodec.component
MayaIFF.component
/Library/ScriptingAdditions:
Adobe Unit Types.osax
/Library/Spotlight:
GBSpotlightImporter.mdimporter
LogicPro.mdimporter
Microsoft Office.mdimporter
iWork.mdimporter
/Library/StartupItems:
BRESINKx86Monitoring
CoreDuoTemp
FanControlDaemon
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
alot...
Library/Frameworks:
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
Move_Media_Player.plugin
doubleTwistWebPlugin.bundle
fbplugin_1_0_1.plugin
fbplugin_1_0_3.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.930da3ce175de4e82bd3cdf1dd8571f74bd3b6a7236bc94bfc00f6e9.plist
com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.8F30A2BB-9699-4472-B47A-69D 7FA822C70.plist
[email protected]
com.apple.FolderActions.enabled.plist
com.apple.FolderActions.folders.plist
com.google.GoogleContactSyncAgent.plist
Library/PreferencePanes:
.c4dsetup
.c4dsetupCINEMA 4DF51A2E69
Airlock.prefPane
Connect360.prefPane
Perian.prefPane
Library/QuickTime:
AC3MovieImport.component
Perian.component
Command 5:
Connect360Helper, DockSpaces, MiniUsage, OpenVPN Connect, Bowtie, SpacieHelper, Rowmote Helper, Dropbox, BambooCore

What in the heck is going on???

Similar Messages

Maybe you are looking for