What IOS do I need for SSH and VPN

Greetings,
I am not a Cisco expert but can muddle my way thru configurations. I have inherited my position from someone else who setup our VPN infrastructure long ago. Problem is that we have added a new location and I have been asked to add it to our VPN. I found a spare 2610 in the equipment closet with IOS Version 12.2(24) which is a higher version than some of the other working VPN routers in the field. I am basically using the other VPN router configs as a template but when I issue the command "crypto", it does not recognize it. Nor does it recognize the command "ip ssh". So the questions are, do I have to get an updated IOS? If this IOS is ok, do I need an add-on VPN pack? If yes to either one, how do I get it? - Thanks.
Don

So if I do a "show ver" on the router I am having trouble with, I see:
IOS (tm) C2600 Software (C2600-IO3-M), Version 12.2(24), RELEASE SOFTWARE (fc1)
On one of the working VPN routers I see:
IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.2(15)T14, RELEASE SOFTWARE (fc4)
So I see the K9 in the IOS version of the working router. Thanks for that part of the puzzle.
Now my question is, how do I get that IOS?
Don

Similar Messages

  • What licenses do I need for CUCM and CME

    Hi Experts,
    I am a newbie to Cisco IP telephony and request your guidance.
    My boss has asked me to order some 7942 phones for a CUCM based site and some 7942 phones for a CME based site.
    For CUCM 9, I understand that we need an enhanced user licenses on CUCM side.
    For the IP phone, I see 2 part numbers and am confused.
    CP-7942G - Cisco Unified IP Phone 7942G
    CP-7942G-CH1 - Cisco Unified IP Phone 7942G, for Channels, with one station user license
    What is the station user license mentioned in the part number CP-7942G-CH1 ? Is it the same as the enhanced user licenses? Assuming i am ordering enhanced user licenses, what should I order CP-7942G or CP-7942G-CH1?
    I also see a part number SW-CCM-UL-7942= ? What is this part? is it needed?
    And what do I need for CME?
    Is FL-CME-SRST-10 enough for the CME?
    What is the part number for the phones? Is it CP-7942G or CP-7942G-CCME?
    I also see another part number "SW-CCME-UL-7942="? What is it? And is it really needed?
    I heard that Cisco simplified Licensing from version 9. At least it doesn't look simple to me :( 
    Can you please help me, Experts?
    Thanks,
    Pete

    Hi without knowing your business goals, current network, etc here is some feedback.
    Depending on your design, if the sites are connected via a reliable WAN you could run the branch site as SRST and not CME, this way you get a rich feature set of the centralised call manager and simplify licenses, etc.
    Anyway, you need to size your CUCME (or SRST) correctly as each Cisco router  hardware platform has a maximum supported handsets. If you have a SIP provider new purchased ISRs now come with 10 CUBE licenses other wise you will need something else such as a VIC for dial tone.
    For instance the following is a router that comes with 25 CME 
    C2901-CME-SRST/K9        
    2901 Voice Bundle w/PVDM3-16,FL-CME-SRST-25,UC Lic,FL-CUBE10
    You can add CP-7942G-CCME which is the physical phone and license for CME
    Use CP-7942G= for the Call Manager Deployment as you will get UCL Enh or CUWL for the user side
    If you have existing routers you will need to obtain upgrade licenses for voice/CME add DSPs if needed for conferencing, media termination, etc, CUBE or voice cards and you can add the phones.
    Router handset capacities see Table 7
    http://www.cisco.com/c/en/us/products/collateral/routers/2900-series-integrated-services-routers-isr/data_sheet_c78_553896.html
    Hope this helps

  • What type of connector needed for Russia and iPod?

    I'm traveling to Russia and will need to recharge iPod once I get there. What kind of adapter/connector will I need? I have the 80GB.

    If you want to connect the iMac to something that has Toslink then you would need a cable similar to this:
    http://www.amazon.com/6ft-Toslink-Mini-Cable/dp/B000FMXKC8/ref=pdcp_e_1?pf_rd_p=413863501&pf_rd_s=center-41&pf_rd_t=201&pf_rd_i=B0002MQGRM&pf_rd_ m=ATVPDKIKX0DER&pf_rdr=1TDMZGX7YP22Q17RP1X3
    I use one myself, they work fine.

  • What license do I need for 25 SSL VPN Peers

    Hi all,
    I want to implement Active/Standby cluster with a pair of 5550 ASAs and I have a licensing question. Here is the "sh activation-key detail" output from both devices...
    ASA1:
    sh activation-key detail:
    Serial Number:  XXXXX
    No active temporary key.
    Running Activation Key: XXXXX XXXXX XXXXX XXXXX XXXXX
    Licensed features for this platform:
    Maximum Physical Interfaces    : Unlimited
    Maximum VLANs                  : 250      
    Inside Hosts                   : Unlimited
    Failover                       : Active/Active
    VPN-DES                        : Enabled  
    VPN-3DES-AES                   : Enabled  
    Security Contexts              : 2        
    GTP/GPRS                       : Disabled 
    SSL VPN Peers                  : 2        
    Total VPN Peers                : 5000     
    Shared License                 : Disabled
    AnyConnect for Mobile          : Disabled 
    AnyConnect for Cisco VPN Phone : Disabled 
    AnyConnect Essentials          : Disabled 
    Advanced Endpoint Assessment   : Disabled 
    UC Phone Proxy Sessions        : 2        
    Total UC Proxy Sessions        : 2        
    Botnet Traffic Filter          : Disabled 
    This platform has an ASA 5550 VPN Premium license.
    The flash activation key is the SAME as the running key.
    ASA2:
    sh activation-key detail:
    Serial Number:  XXXXX
    No active temporary key.
    Running Activation Key: XXXXX XXXXX XXXXX XXXXX XXXXX
    Licensed features for this platform:
    Maximum Physical Interfaces    : Unlimited
    Maximum VLANs                  : 250
    Inside Hosts                   : Unlimited
    Failover                       : Active/Active
    VPN-DES                        : Enabled
    VPN-3DES-AES                   : Enabled
    Security Contexts              : 2
    GTP/GPRS                       : Disabled
    SSL VPN Peers                  : 25
    Total VPN Peers                : 5000
    Shared License                 : Disabled
    AnyConnect for Mobile          : Disabled
    AnyConnect for Cisco VPN Phone : Disabled
    AnyConnect Essentials          : Disabled
    Advanced Endpoint Assessment   : Disabled
    UC Phone Proxy Sessions        : 2
    Total UC Proxy Sessions        : 2
    Botnet Traffic Filter          : Disabled
    This platform has an ASA 5550 VPN Premium license.
    The flash activation key is the SAME as the running key.
    So it looks obvious that I'll have to upgrade the first ASA to support 25 SSL VPN Peers in order to build HA cluster, right?
    Now I want to know do I need the "ASA5505-SSL25-K9" license or something else.
    Thanks much in advance for any help!

    Hi all,
    as I said I tried to upgrade the ASA1 to version 8.3, but unfortunately the limit of 2 SSL VPN Peers remained.
    It seems so that I’ll have to buy that license, although I don’t need that functionality. If someone has some more hints left, I’d be grateful to hear them.
    Here is the output from “sh activation-key detail” and below the output from “sh ver”:
    Licensed features for this platform:
    Maximum Physical Interfaces   : Unlimited     perpetual
    Maximum VLANs                 : 250           perpetual
    Inside Hosts                   : Unlimited     perpetual
    Failover                       : Active/Active perpetual
    VPN-DES                       : Enabled       perpetual
    VPN-3DES-AES                   : Enabled       perpetual
    Security Contexts             : 2            perpetual
    GTP/GPRS                       : Disabled       perpetual
    SSL VPN Peers                 : 2             perpetual
    Total VPN Peers               : 5000           perpetual
    Shared License                 : Disabled       perpetual
    AnyConnect for Mobile         : Disabled       perpetual
    AnyConnect for Cisco VPN Phone : Disabled       perpetual
    AnyConnect Essentials         : Disabled       perpetual
    Advanced Endpoint Assessment   : Disabled       perpetual
    UC Phone Proxy Sessions        : 2             perpetual
    Total UC Proxy Sessions       : 2             perpetual
    Botnet Traffic Filter         : Disabled       perpetual
    Intercompany Media Engine     : Disabled       perpetual
    This platform has an ASA 5550 VPN Premium license.
    Licensed permanent key features for this platform:
    Maximum Physical Interfaces   : Unlimited     perpetual
    Maximum VLANs                 : 250           perpetual
    Inside Hosts                   : Unlimited     perpetual
    Failover                       : Active/Active perpetual
    VPN-DES                       : Enabled       perpetual
    VPN-3DES-AES                  : Enabled       perpetual
    Security Contexts             : 2             perpetual
    GTP/GPRS                       : Disabled       perpetual
    SSL VPN Peers                 : 2             perpetual
    Total VPN Peers               : 5000           perpetual
    Shared License                 : Disabled       perpetual
    AnyConnect for Mobile         : Disabled       perpetual
    AnyConnect for Cisco VPN Phone : Disabled       perpetual
    AnyConnect Essentials         : Disabled       perpetual
    Advanced Endpoint Assessment   : Disabled       perpetual
    UC Phone Proxy Sessions       : 2             perpetual
    Total UC Proxy Sessions       : 2             perpetual
    Botnet Traffic Filter         : Disabled       perpetual
    Intercompany Media Engine     : Disabled       perpetual
    The flash permanent activation key is the SAME as the running permanent key.
    Cisco Adaptive Security Appliance Software Version 8.3(2)
    Device Manager Version 6.4(7)
    Compiled on Fri 30-Jul-10 17:49 by builders
    System image file is "disk0:/asa832-k8.bin"
    Config file at boot was "startup-config"
    xxxxx up 12 mins 33 secs
    Hardware:   ASA5550, 4096 MB RAM, CPU Pentium 4 3000 MHz
    Internal ATA Compact Flash, 256MB
    BIOS Flash M50FW016 @ 0xfff00000, 2048KB
    Thanks,
    Simo

  • What technical components are needed for integration of SAP BI and BO?

    Hello,
    What technical components are needed for integration of SAP BI and BO?

    Hi,
    you need to setup a BOBJ server (eg. BusinessObjects Enterprise XI 3.1 or BO Edge 3.1) and then install the BusinessObjects integration Kit for SAP on the same machine your BOBJ server runs.
    In order to build reports you can either use Crystal Reports (eg Install Crystal Report Designer 2008 V1 if you have an XI 3.1 server installed), WebIntelligence (Install the Business Objects XI 3.1 Client Tools in order to be able to build universes), BusinessObjects Voyager or XCelsius. Please note that you have to always install the BOBJ integration Kit for SAP (should be the same version as your server and client installation) on your clients AFTER you installed one or more of the above client tools.
    Please take again a look at the following link for more detailed information (from Ingo) on this:
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f]
    Regards,
    Stratos

  • I have iPhoto Version 8.6, and and want to upgrade to Version. I can't find a download for Version 9.0.0.  Exactly what version do I need to download and or buy, and where do I find it.  Every version of 9 that I download tells me I need an earlier one.

    I have iPhoto Version 8.6, and and want to upgrade to Version 9. I can't find a download for Version 9.0.0.  Exactly what version do I need to download, and or buy, and where do I find it?  Every version of 9 that I download tells me I need an earlier one.

    There is no download aside from the one in the Mac App Store available to people running Mac OS X 10.6.6 and newer. The other way of getting iPhoto 9 is to purchase iLife 11 on DVD. As iLife 11 requires Mac OS X 10.6.3 or newer, it's usually best to update to 10.6.8 for free and then use the Mac App Store version.
    (61916)

  • What charging adapters do I need for Finland and England

    What charging adapters do I need for Finland and England

    Bring the power adapter that you got with your phone - you just need to get an adapter for the plug into the wall. You don't need a converter.
    Airports usually sell the adapters and stores that sell luggage often have them also.
    ~Lyssa

  • How to find out what are the interfaces used for Job and Job Codes

    HI All,
    I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
    Thanks In Advance
    Sunny

    Hi,
    Here is an idea for your request.
    Basically you can create a simple query on multiprovider 0TCT_MC01.
    Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
    Choose following characters into your objects:
    InfoProvider ( 0TCTIFPROV )  - you can create a variable for choosing infoprovider before query runs.
    *Tp.[Type of BI Application Object] 0TCTBISOTYP  = filter this with 'QUERY' or whatever your need is.
    *BI Application Object 0TCTBISBOBJ,  ( this will give you the name of the queries)
    In key figures choose,  Count for BI Appl. (0TCTWTCOUNT).
    (number for query run)
    Create a condition , for top 20.
    Hope this helps.
    Derya

  • What drivers do I need for a dell V515w AIO printer on my MacBook Pro OX S 10.7.2

    What drivers do I need for a Dell V515w all in one printer for my MacBook Pro OS X 10.7.2 ????

    Uh, tough call, you'll have to check what is used with a PC, drivers or driver+software.
    If driver+software then that's a problem as they likely won't write one for OS X.
    If drivers you can install these open source one and hopefully it might work,  Dell and Apple don't get along so you likely won't see Dell drivers installed by Apple in OS X like they do for others.
    http://sourceforge.net/projects/gimp-print/files/

  • What cable do I need for a full migration from a 2011 MacBook Pro to a new current one-wireless migration way too slow.?

    What cable do I need for a full migration from a 2011 MacBook Pro to a new current one-wireless migration way too slow.?

    All you need is an Ethernet cable.
    Just plug it into both machines. Don't bother with a crossover cable, just a plain old Ethernet cable will do. The Ethernet ports on the Macs are smart and will adjust appropriately.

  • What adapter do i need for my macbook pro for a presentation

    what adapter do i need for my macbook pro for a presentation

    What model/Year MBP do you have and what are you connecting it to?
    Ciao.

  • What charger do I need for my 2008 macbook pro 15"

    what charger do I need for my 2008 macbook pro 15"?

    This one:
    http://store.apple.com/us/product/MC556LL/B/apple-85w-magsafe-power-adapter-for- 15-and-17-inch-macbook-pro
    Ciao.

  • What app do i need for my phone printer officejet pro 8500a

    what app do i need for my phone printer officejet pro 8500a

    Hi tiys,
    If you have a Android phone you can download HP home and biz app from the andriod market.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • What app do i need for my epson 600 printer to work with my ipad

    what app do i need for my epson 600 printer to work with my ipad

    Hi,
    You are asking at a wrong forum, anyway firstly please check to see is your printer in this list ? 
    http://support.apple.com/kb/ht4356
    If Yes, please follow this checklist and fix:
    iPad: http://www.apple.com/support/ipad/assistant/airprint/
    If No, check with Epson
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • What software would I need to copy and burn DVD's

    What software would I need to copy and burn DVD's

    Copy what kind/type of DVDs?  For non-copy protected DVDs you can use Disk Utility (in the Applications folder) to make a disk image of the DVD disk and then burn it back to a disk.
    OT

Maybe you are looking for