What is -2000F error code mean while doing Internet Recovery?

My new macbookpro (1 hour old) crashed while trying to setup dual boot and now only works with internet recovery.
But no matter how many times i restart and connect via wifi it always shows www.apple.com/support follow by -2000F in second line.
What does this mean? Bad internet connection? None compatiable WIFI router? (Linksys E4200).
Thanks

Mike Yang wrote:
My new macbookpro (1 hour old)
You have 14 days to return the computer w/no questions asked. Plus you have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/your problems. A message board is the LAST place you should be.

Similar Messages

Getting error code 0x400110020000100b while doing system recovery for windows vista 32 bit.

I attempted to do a system recovery on my Laptop using the included recovery discs and got this error 0x400110020000100B. THe disc looked pretty beat so last week I ordered a new set. Now when I got to put disc 2 in (at 80% complete) I get the same error. I called customer support and he took me through the F9 process to no avail and I've also tried the F11 approach which got me no where. I'm frustrated because I really don;t have the money for a new laptop.
Laptop is a HP Pavilion DV6700.
Any help would be appreciated more than you know.
System is Windows Vista 32 bit
The guy on the phone said "well ya know thats a pretty old computer"...gee thanks..
This question was solved.
View Solution.

You're very welcome.

TS3694 itunes error (-42404) -- Okay, getting a little frustrated (but then again, who isn't a little frustrated?). I recently tried to upgrade iTunes software a few days ago but it failed. What is (-42404) error code mean?

itunes error (-42404) -- Okay, getting a little frustrated (but then again, who isn't a little frustrated?). I recently tried to upgrade iTunes software a few days ago but it failed. What is (-42404) error code mean?
I get the following:
(1) iTunes - The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? Yes/No
(2) iTunes - The software required for communicating with iPods and mobile phones could not be repaired. Please reinstall iTunes if you wish to use these devices. OK
(3) iTunes error message - A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404) OK
(4) iTunes error message - We could not complete your iTunes Store request. A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404) There is an error in the iTunes Store. Please try again later. OK
Okay, so I decided to uninstall and reinstall. Funny, iTunes can be found in a program folder, but it does not show up in the programs list. I tried to look for it using the command prompt ("wmic" --> "product get name") but iTunes is not there either. Doesn't even show up in the registry to try to uninstall.
I just want to "properly" uninstall and reinstall iTunes (plus the other usual suspects, Apple Software Update, Apple Mobile Device Support, Bonjour, & Apple Application Support). If anyone out there has any suggestions, please help! (I'm running Windows Vista -- don't judge/laugh) :-)

Okay, feeling like an idiot, but will share so others don't have to. I rebooted my computer and that enabled iTunes to reappear in the programs list. Don't appear to be having the same problems as before (no error messages now). Problem solved!

Can anyone tell me what the following error code means? 4MOT/2/40000004: BOOSTA-1235

Can anyone tell me what the following error code means? 4MOT/2/40000004: BOOSTA-1235
Fans are running permanantly and this is the error I get when running apple hardware test.

SNS is a sensor error. The sensors read actual temperatures at several points inside the Mac chassis to decide when things are heating up, and which fan or fans speed up to improve cooling.
Some of those sensrs are just a thermal-sensitive transistor mounted to a surface that conducts heat, and replacement does not run into big money. Disconnected wires are sometimes a possibility, especially if things were changed nearby, e.g., new heatsink.

Quickly!Quickly!Quickly!What is the error code mean? And how to solve it ?Please give your answer. Thanks

What is the error code mean? Why is there an error?And how to solve it ？Please give your answer. Thanks！
——1110340026
Attachments:
QQ图片20140403140655.jpg ‏108 KB

Sannieboyyyy wrote:
Could be me, but your VI is not working properly on the english version of LV. Can I suggest you to try programming in English in the future?
Yes, it's you. The VI is working just fine, except for some cosmetic issues with the labeling. I don't think is is a valid suggestion to force somebody to program in a specific language, especially since LabVIEW supports all these languages.
Here are the problems with the VI:
If you don't want an amplitude of zero, you need to set the amplitude control to a nonzero value before running. Simple as that!. (You could also set the input range for the amplitude control to exclude zero or use a case structure to skip certain code if the amplitude is zero).
You could also wire the error output to an indicator so it simply displays the errors, but keeps running.
Your while loop is currently useless. You can delete it and the program function will not change. Use a stop button at the loop condition.
Your while loop needs some timing so it runs at a reasonable rate. Either add a small wait or configure the signal generation to "simulate acquisition timing" instead of "run as fast as possible".
LabVIEW Champion . Do more with less code and in less time .

What is the error code mean? And how to solve it ?Please give your answer. Thanks

What is the error code mean? And how to solve it ？Please give your answer. Thanks
Attachments:
QQ截图20140403134626.png ‏59 KB

duplicate post
LabVIEW Champion . Do more with less code and in less time .

Hi can someone explain what the following error code mean and how i can recifty to download a copy of ebook purchase Error getting License. License Server Communication Problem: E_ACT_NOT_READY

Hi can any one help
I keep getting the following error code when I try and down a ebook which I have purchase
Error getting License. License Server Communication Problem:
E_ACT_NOT_READY
can someone advise me what this means and how I recifty the problem to enable me to read the ebook purchase?
Thanks

I am having this exact issue. I just downloaded a book and went to open it and got this exact problem.
I purchased he book through indigo/kobo edition and paid for it and immediately went to open it and am getting the same error
Error getting License. License Server Communication Problem only mine says Bad Device key after.
Not sure why someone has not answered this question yet...i am using windows 7 and this is how i always do it. Never had this problem before when purchasing a book.
i hope someone answers this soon.

HT1369 what is the error code mean -42220

Everytime i start up itunes i get the error code -42220
Also i cant seem to download music to my ipod classic?

duplicate post
LabVIEW Champion . Do more with less code and in less time .

Error code occurs while doing copy data from form to table

Error Code: -V: RABAX_STATE -e:UNCAUGHT_EXCEPTION
The ABAP call stack was:
Method: RAISEELEMENT_NOT_FOUND of program CL_WDR_CONTEXT_NODE

there was an error in your program lines
Please analyze the error and you can found the exact line of error in ST22 tcode
Once you open the st22, select your error and double click on it, then in left hand panel select " Source code extract".
then you wiil see your prg lines...
you will see the arrow like >>>>> in front of exact line error.
As per your errror seems, you have missed the node declaration part , some like that..any how check in st22
Regards
Srinivas

Error code 0x80020000 while trying to burn a disc? What does this mean?

error code 0x80020000 while trying to burn a disc? What does this mean?

Take a look under 'More like this' to the right on this page.

Does anyone know what this error code means?My itunes will not open, no matter how many times i downlaod and restore it??? "The procedure entry point xmlITexTextReaderName could not be located in the dynamic link library libxml2.dlll."

Does anyone know what this error code means?My itunes will not even open, no matter how many times i downlaod and restore it??? "The procedure entry point xmlITexTextReaderName could not be located in the dynamic link library libxml2.dlll." Please let me know if your know anything! It is greatly apprecitated!

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a

I received error code (-50) when trying to restore my iPad. Does anyone know what this error code means?

I received error code (-50) when restoring my iPad2. Does anyone know what this error code means and how to fix it?

See the More Like This Section on the right...

When synchig my iphone to my itunes, I get an error message at the end with code 1150. What is this error code and what does it mean?

When synching my iphone to my itunes, I get an error message at the end with code 1150. What is this error code and what does it mean?

try uninstalling and reinstalling itunes on your computer. here is a link for that http://support.apple.com/kb/HT1925

On updating Creative Cloud, I get an error code 50 - what does this error code mean?

Downloading and installing an upgrade to Creative Cloud, I keep getting an error code 50. I have look for a list of error codes with no luck. Can anyone tell me what this error code means and what the fix is? Thanks in advance.

Error 50 https://forums.adobe.com/thread/1432237 may help

HT201257 Does anybody know what hardware test error code this is 4SNS/1/40000001: TCOH -1.704

Does anybody know what hardware test error code this is 4SNS/1/40000001: TCOH -1.704
Trying to track down fast running fan that will not reset and this error came up.

only apple techncians have access to what those codes mean. It is sensor related, but as it is a hardware problem, you need to bring it into an Apple store or AASP to have it correctly diagnosed and fixed.

What is -2000F error code mean while doing Internet Recovery?

Similar Messages

Maybe you are looking for