What is 429 physical nand block offset 16

this iPad in business had the following error message when turned on:
NAND] _FindFlashMediaAndKeepout :429 physical nand block offset 16
[NAND] start:220 this 0x97aedc00 PROVIDER=0x97b9c500 flashMedia=0x97b9c50
[NAND] WMR_Start:149 Apple PPN NAND Driver, Read/Write
[NAND] WMR_Start:174 FIL_Init [OK]
It was erased and reset to default settings then after a month or so, the error came back. 

Hi, my ipad 2 just got the same problem and after reading all relative post, finnally i figrue it out, that is no software issue at alll just hardware,
I did attemp replace the power button cable on my ipad so i must disconnect the back camera cable so there is my problem. Because the connect some how not exact in place, i took the camera out and the issue is gone. So, in your case, if you did try to replace anything look at them again or you just take them out one by one and reboot ipad until it work.
Hope this help
Binh

Similar Messages

  • HT201412 Apple IPAD has crash with [NAND] _FindFlashMediaAndKeepout:429 physical nand block offset 16 error

    Today my IPad has crashed with this text at the top of the screen - it keeps rebooting bu won't go any further past this piece of text.
    The full error text shown is:
    [NAND] _FindFlashMediaAndKeepout:429 physical nand block offset 16
    [NAND] start:220 this 0x9c0b6c00 PROVIDER=0x9c0b5c00 flashmedia=0x9c0b5c00
    [NAND] WMR_Start:149 Apple PPN NAND Driver, Read/Write
    [NAND] WMR_Start:174 FIL_Init   [OK]
    And then gets no further.
    What is this, does this mean something has burnt out and how do I get the tablet repaired ? I live in the UK and the serial no. of the 16 GB IPad is:
    DN6HDMTNDFJ1
    I so need this tablet for my work and need to get it back up and going again.
    Many thanks,
    Jayne

    Have you tried resetting it? I.e. Hold down the sleep/wake button and the Home button simultaneously until you see the Apple logo appear, then release them and see if the iPad will startup okay.

  • My ipad3 will not turn on except to display the following[NAND] _FindFlashMediaAndKerpout:429 physical NAND block offset 16  [NAND] start:220 this 0xa015cc00 PROVIDER=0x9ed20080 flashMedia=0x9ed20080  [NAND] WMR_Start:149 Apple PPN NAND Driver, Read/Write

    Help. My ipad will not boot up except to show the following message.
    [NAND] _FindFlashMediaAndKerpout:429 physical NAND block offset 16
    [NAND] start:220 this 0xa015cc00 PROVIDER=0x9ed20080 flashMedia=0x9ed20080
    [NAND] WMR_Start:149 Apple PPN NAND Driver, Read/Write
    Ideas? Help

    Hi, my ipad 2 just got the same problem and after reading all relative post, finnally i figrue it out, that is no software issue at alll just hardware,
    I did attemp replace the power button cable on my ipad so i must disconnect the back camera cable so there is my problem. Because the connect some how not exact in place, i took the camera out and the issue is gone. So, in your case, if you did try to replace anything look at them again or you just take them out one by one and reboot ipad until it work.
    Hope this help
    Binh

  • My phone was jettisoned into a hot tub.  Now I'm getting "_FindFlashMediaAndKeepout:600 physical nand block offset 1".  what do I do?

    My phone was jettisoned into a hot tub.  Now I'm getting "_FindFlashMediaAndKeepout:600 physical nand block offset 1".  What do I do?

    If you can turn it off, do so and put the device in a sealed bag of uncooked rice for 3-5 days. After that, you can try and charge it and see if it will work. If not, you will need to purchase an OOW (out of warranty) replacement. See this link for costs in your area. Go to the Warrant & Service pricing section after selecting your area.
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne

  • Findflashmediaandkeepout 601 physical nand block offset 1

    A couple days ago, my phone got slightly wet. I soaked it in rice for a day then let it sit in a fairly warm room/area to air dry for most of the next day. The tird day, I looked over my phone and saw that it appeared to be completely dry so I allowed it to charge. When I plugged it up, I saw the usual Apple logo then 2 seconds later an error message popped up at the top of the screen. This is the main phrase: "findflashmediaandkeepout 601 physical nand block offset 1"
    Seconds later, the message would disappear, but the Apple logo would remain for a few moments, disappear, reappear, etc. The phone is unresponsive to the pressing of just one button (home or power), and shuts off for a maximum of 25 seconds when pressing the buttons in unison.
    I know I should take this to the Geniuses but I'm in desperate need of  answers now.. Can anybody help me fix my phone or even help me understand what this error code means?????

    Hi mmmaaaaany, 
    Welcome to the Apple Support Communities!
    If your iPhone is unresponsive after getting slightly wet, it may be necessary to have your iPhone evaluated for repair. If you choose to set up the repair, you can follow the links on the attached website to set it up.
    iPhone Other Repair Options - Apple Support
    Have a great day, 
    Joe

  • [NAND ] _FindFlashMediaAndKeepout :601 physical nand block offset 1

    Hi!
    I Need help! Can anyone help me?
    My phone crashd very hard on the floor... everything at the Display was destroed..
    I've changed the Display an now Shows me an error... I dont understand what this means!
    Can anybody read this error and tell me, which part or what else is terminated or any Flex?
    Screen is new, touch works... but when i restore my phone, Shows me this error...
    thanks and sry 4 bad english
    My Error:
    [NAND ] _FindFlashMediaAndKeepout :601 physical nand block offset 1
    [NAND ] start :356 this 0xa18e0400 PROVIDER=0xa04f5e80 flashMedia=0xa04f5e80
    [NAND ] WMR_Start : 149 Apple PPN NAND Driver , Read/Write
    [NAND ] WMR_Start : 174 FIL_Init [OK]
    [NAND ] WMR_Open : 371 VFL_Open [OK]
    [NAND ] s_cxt_boot : 88 sftl : error , unclean shutdown; adopted 3494 spans
    [NAND ] WMR_Open : 420 FTL_Open [OK]
    [NAND ] _publishServices : 642 FTL capabilities : 0x00000001
    [NAND ] _ppnvflGetStruct : 3469 Checking borrowed blocks - count : 25 max_count : 25
    [NAND ] _fetchBorrowedList : 881 number of borrowed blocks 18

    It's always risky opening an iPhone, which is why Apple considers it serious enough so they won't fix a phone that has been opened. This error means that the SSD memory control has detected a failure. It could be a flex not inserted fully, but it could also have been a static discharge when the case was opened because whoever did the repair did not do it on a copper ground plane and/or was not properly grounded him or her self. It's really pretty much impossible to diagnose a hardware fault without proper test equipment. If the front camera problem occurred before the phone was opened it is unlikely to be related to this newest problem. You can check for water damage by removing the SIM card and looking in the empty SIM slot with a bright light. If you don't see any red dots then water probably did not get into the phone, so that would be one less concern.
    What happens if you do a reset (hold the HOME and SLEEP buttons at the same time until an Apple logo appears)?

  • Iphone 5 error message on the top saying, 601 physical nand block offset 1.

    iphone 5,on the screen, apple logo on and some error message on the top saying, 601 physical nand block offset 1. once i remove the cable from laptop to phone it goes on dfu mode and can't restore the phone because of some unknown error. please help.

    yeah i am on my way. lets hope they will fix.
    thanks.

  • I too face the dreaded [NAND ] _FindFlashMediaAndKeepout :601 physical nand block offset 1 [NAND ] start :356 this 0x9f538400 PROVIDER=0x9f6b1f00 flashMedia=0x9f6b1f00 [NAND ] WMR_Start : 149 Apple PPN NAND Driver , Read/Write [NAND ] WMR_Start : 174

    I've seen a few other people who have also had this issue, and their problem turned out to be some kind of camera flex thing, or a main logic board. I have an iPhone 5C iOs 8. I get that weird error message when trying to turn my phone on, after it randomly turned off this morning. Recently, I did have the screen replaced (for the second time) by a THIRD Party. Yes I know, I've voided the warranties, blah, blah blah, please don't crucify me. Now, the phone will bring up the apple logo on a black screen, but it does nothing. I'be tried to restart etc, and may have accidentally wiped out my phone by putting it in recovery mode. But oh well. Also worth noting is that my front camera hasn't worked in a few months, but I did nothing about it. Could the front camera problem be related to this? I also dropped my phone in the sink last night, but it was in its life proof, dried immediately and kept working fine. I have had nothing but problems with this phone, and if anyone has any advice, PLEASE HELP. Thanks.

    I don't believe any of us here can do anything to help you other than to suggest that you take the device back to the third-party that did the repair and have them do the repair correctly.

  • My iPhone 5 fell into the water and writing like this showed up with the apple sign.[NAND]_FindFlashMediaAndKeepout :601 physical nand block offset 1 [NAND] start :356 this 0x96fec400 PROVIDER=0x96193b80 flashMedia=0x96193b80 [NAND] WMR_Start : 149 Apple

    my iPhone 5 fell into the water and a writing like that appeared with the apple sign. (when its turning on) but it is now a gray screen and it is not working, nor can i connect it to my laptop.

    You're seriously trying to use an electronic device that's been in contact with water????
    You do know that since th beginning of time water and electricity don't mix, right?
    Start being smart and top trying to use it NOW, and put it in a bag of rice for a week.

  • Ipad 3 wi-fi - nand flash media is keepout : 688 physical nand Block..

    Hi,
    i Need help how to fix it?
    Need your guides how to fix it, my ipad warranty is expired. according to apple repair this item cannot repair need to replace 1 to 1. since the warranty expired than i need to up the money MYR 1,300.
    Please guide me what should i do?
    it's logical board? its flash problem, or something else please advice.
    please refer this links:http://www.ifixit.com/Answers/View/138480/The+Error+is+nand+flash+media+is+keepo ut+%3A+688+physical+nand+Block..

    I'm sorry but this item is 1 year and a few months old? damage to nand is not something you'd expect from normal wear and tear and therefore not caused by you. I'd contact Apple again. Be pushy, write emails, ring them. There are people who'd be able to replace this but finding them is the problem. good luck
    pollytintop, 1 hour ago
    Thanks pollytintop for your advice- I’m still keeping looking forward how to fix it. Will not this item (ipad) throw become rubbish due to damaged that do not know cause and cannot repair or fix it? Hope somebody highlighted this issue to Apple (the best customer service ). Thanks

  • Flash media and keepout 600 physical nand black offset 1

    My screen is frozen and this is the message at the top of the screen. Help~please!

    Any physical or liquid damage to the iPhone?
    First try a reset:
    - hold the home button and sleep/wake button down at the same time
    - the iPhonw qill turn off(keep holding) then as soon as you see the Apple logo appear release both buttons
    If the issue remains then try plugging it into a PC/Mac with iTunes and see if it will be recognised. If it is recognised then back it up and then restore to factory settings. If all steps fail then [book an appointment at an Apple Store to have the iPhone evaluated.
    All the best

  • [NAD] _FindFlashMediaAndKeepout :601 pysical nad block offset 1

    I was using my phone when it shutted down and when I booted up again on the bootup screen i've found this:
    [NAND ] _FindFlashMediaAndKeepout :601 physical nand block offset 1
    [NAND ] start :356 this 0x88164400 PROVIDER=0x86c32d80 flashMedia=0x86c32d80
    [NAND ] WMR_Start : 149 Apple PPN NAND Driver , Read/Write
    [NAND ] WMR_Start : 174 FIL_Init  [OK]
    [NAND ] WMR_Open : 371 VFL_Open   [OK]
    [NAND ] s_cxt_boot : 88 sftl : error , unclean shutdown; adopted 482 spans
    [NAND ] WMR_Open : 420 FTL_Open   [OK]
    [NAND ] _publishServices : 642 FTL capabilities : 0x00000001
    [NAND ] _ppnvflGetStruct : 3469 Checking borrowed blocks - count : 23 max_count : 23
    [NAND ] _fetchBorrowedList : 881 number of borrowed blocks 16
    What happend?!
    Help me!!!!
    Thanks Leo

    This might be a hardware problem with your flash drive, you should get it checked by visiting an Apple Store or Authorized Apple Service Provider next to your place.
    iPhone - Contact Support - Apple Support
    Has the software on your device been modified in the past?

  • What are the physical topology and logical topology in sharepoint

    Hi
    what are the physical topology  and logical topology in sharepoint
    how to define  the physical topology  and logical topology in
    sharepoint
    adil

    Here are the example topologies for SharePoint:
    Traditional - 
    http://www.microsoft.com/en-us/download/details.aspx?id=30377
    Streamlined - 
    http://www.microsoft.com/en-us/download/details.aspx?id=37000
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • What is the use of block step in BPM? Please help!

    Hi Experts,
             I would like to know what is the use of block step in BPM? In what cases we can use it?
    Can somebody explain BLOCK by relating to any programming language ( java) control step?
    Please help!
    Thanks
    Gopal

    Hi,
    Block step is similar to what we use curly braces in most of the languages which defines the scope. For example if we are using loop step in bpm to loop through some variable then we can use block step to restrict the scope of loop step up to some point.
    Thanks and Regards,
    Sudheer.

  • Updation of Physical Inventory Blocking Indicator

    Dear All,
    I would like to know how the Physical Inventory Blocking Indicator is updated in the material master recored storage location stock Tab....
    Is there any setting in customizing for this as its not getting updated when I create a Physical Inventory document... ?

    the indiactor is not getting updated at all, If I do it manually by table maintainance the posting block works fine....
    but need a programme name thru which this field is updated. Can anyone tell me where  which programme MARD-SPERR field is being used.
    I dont have access to any standard system where this indicator is updated automatically
    Thanks in advance---

Maybe you are looking for