What is a help set and how to create one.?

Hi everyone,
I need to know that what is a help set, how to create a help set and how to create help file in a java.
Regards.
Bilal

A help set is a set of xml files used in creating the info used by JavaHelp to provide help for an application. Have a look at
http://supportweb.cs.bham.ac.uk/documentation/tutorials/docsystem/build/tutorials/javahelp/javahelp.pdf
for a quick guide to creating a JavaHelp system - there are loads of other useful resources on the web - just look

Similar Messages

What is this effect called, and how to create it?

Hello,
I' m just curious about this gradation effect's name, and how to create it in Photoshop.

Hi,
Chuck is on the right path. You can construct this with the Filter> Pixelate> Color Halftone..., but then you have to go further.
The pattern is made of two sections of the same halftone channel, one rotated 180 degrees and horizontally offset.
Basic outline:
1. create a linear gradient (you can work in color or black/white)
2. Filter> Pixelate> Color Halftone... use a large radius value for bigger circles, and set the channels to 0 or 90
3. after the filter has run, go to the Channels panel and find a transition in one of the channels that you like
4. Cmd/Ctrl click on the thumbnail of the channel to make a selection
5. go back to the Layer panel and turn off the background layer with the full haltone filter effert.
5. create a new layer, and fill it with a color (you want the dots to fill so invert the selection if needed)
6. create another layer and fill it with a second color
7. rotate the layer from step 6 180 degrees, and move it so the same size circles in the middle of you doc overlap. Now offset horizontally so the center point of circles lies halfway between the layer created in step 5.
8. now marquee a selction that goes approximately half of the doc and create masks for both layers.
9. Invert one fo the masks so that what you see is small dots of one color increasing to the center, and the second color decreasing back t the edge
10 create a third layer and fill it with one of the color and drag copy the mask from the dot pattern layer of the opposite color. Drag this layer in stack order to just above the background layer.
11. create a fourth layer filled with the opposite color of the step 11 layer. Drag this layer in stack order just below the layer you created in step 10.
12. Now (there's surely some math that makes this more accurate but I was just eyeballing it), move the top layer with the mask linked down so it is below the other offset centers by ~60-70 %. Unlink the mask and move it back so more of the dot is exposed and starts to show when it will intersect with the other layer.
13. Do the same mask movement with the second color dot layer so more of that layer's circle shows, until each dots tangents match up.
Here's my layer panel for reference.
regards,
steve

I cant understand what this problem... and How to create two channel

i have try solve this problem and there are still happen again....and someone can help me... the another one..there are have solution to design 2 physical channel in my project. Someone can give me advice, any idea and suggestion...t.Q
Now i have attach my final project.vi
Attachments:
Oscilloscope_B.llb ‏130 KB

OK this is by no means a finnished product. I added a state machine and tried to show you how to do some of the things that you are looking for.
Tim
Johnson Controls
Holland Michigan
Attachments:
Oscilloscope.zip ‏119 KB

Not printing text-only graphics on Canon. Not printer problem-print ok on Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Not printing text only on Canon--grahics print ok. Not printer problem. Prints ok on a Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Without your printer model numbers, readers can only give you vague general directions.
System Preferences > Print&Fax > ...
... shows a list of all set-up printers.
If you are having serious problems, it makes sense to "Reset the Printing System" (which also removes all printer set-ups) and add back each printer. It only takes a few minutes.
Mac OS X 10.6 Help: Resetting the printing system

Help, please! I am suddenly being presented with CYMK colors to 2 decimal points. What did I accidentally change and how can I fix it?

This is driving me crazy. I am suddenly being presented with CYMK colors to 2 decimal points. Too much info for me. What did I accidentally change and how can I fix it? I've been through all of the preferences, views etc. I can find but no luck. Thinking this has something to with the color settings (obviously) but with all of the possible options there I could use some help. Thanks, all!

May have been a switch from RGB to CMYK.
Or you moved one of the sliders with shift key pressed.

What is Infoset and How to create

HI Experts
Can any one please explain me what is the purpose of INFOSET in BW
and how to create a info Set between A Info Object and Cube
Thanks

Dear bw user,
Check the below link
http://help.sap.com/saphelp_nw04s/helpdata/en/ed/084e3ce0f9fe3fe10000000a114084/content.htm
Purpose is,
1.To join required data from basic InfoProviders
2.This allows building a relational BI data model with unified views for reporting (seeveral InfoProviders,but only one view). Therefore, we recommend keeping data in smaller, basic InfoProviders that can be flexibly joined for reporting purposes.
3. To allow BEx Reporting on a DataStore object without turning the BEx Reporting indicator on
4. To evaluate time dependencies (for example, join time dependent master data InfoObjects)
5. To be able to create self joins and left outer joins
Creatind in simple steps
Infoset is a Virtual Infoprovider.
Click on InfoProvider under modeling in RSA1 > Select InfoArea > right click Create Infoset > give name and description.
Select the ODS / Master Data Object or more than one ODS and maintain the link.
Infoset works on Join operation.
you can include Infocube if it is BI 7.
chk this link...
http://help.sap.com/saphelp_nw70/helpdata/en/a3/96663bd194a978e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2f5aa43f-0c01-0010-a990-9641d3d4eef7
Aslo see this link contents
Creating InfoSets
Prerequisites
Make sure that the objects for which you want to define the InfoSet are active. Create any required InfoObjects that do not
exist already and activate them.
Instead of creating a new InfoSet, you can transfer one of the InfoSets that are delivered with SAP Business Content.
Procedure
1. You are in the InfoProvider tree of the Modeling function area in the Administrator Workbench.
Choose the Create InfoSet function from the context menu (right mouse-click) of the InfoArea in which you want to create an
InfoSet. You get to the Create InfoSet dialog box.
2. Type in the following information for your new InfoSet:
¡ technical name
¡ long description
¡ short description
3. In the Start with InfoProvider section, you determine which InfoProvider you want to use to start defining the InfoSet.
¡ Select one of the object types that the system offers you:
ODS Object
InfoObject
Choose an object.
If you want to choose an InfoObject, it must be a characteristic with master data. The system provides you with the
corresponding input help.
4. Choose Continue. You get to the Change InfoSet screen. For more information on editing InfoSets see Editing InfoSets.
When you create an InfoSet, the system generates a corresponding entry for this InfoSet in the subtree of the InfoArea. The
following functions are available from the context menu (right mouse-click) of this entry:
Change
Delete
Object overview
Editing InfoSets
Prerequisites
Before you can get to the screen where you edit InfoSets, the following prerequisites have to be met:
You have created a new InfoSet.
You have selected the Change function from the context menu of an InfoSet entry in the InfoProvider tree of the Modeling
function area in the Administrator Workbench.
You have called the InfoSet Builder transaction, and selected the Change function. You can find additional information
under Additional Functions in the InfoSet Builder .
Procedure
1. You are in the Change InfoSet screen.
Choose a layout for the InfoProvider tree:
InfoArea
InfoProviders Used
All ODS Objects
All InfoObjects
For more information on the screen layout, particularly the layout of the InfoProvider tree, see Screen Layout: Changing
InfoSets.
2. Use the function Where-Used List via AWB to determine which BW objects use the InfoSet that you have selected. You get to
the Administrator Workbench: Where-Used List screen. You are able to work out what would happen in the system if you made
changes to the InfoSet. This helps you to decide whether or not it is sensible to make these changes at this particular point
in time.
3. You define the InfoSet by inserting one or more InfoProviders into the join.
There are several ways of inserting an InfoProvider into the join control:
¡ From the InfoProvider tree:
§ In the InfoProvider tree, double-click on the entry that corresponds to the InfoProvider that you want to add to the join
control.
§ Use the drag-and-drop function to move the InfoProvider into position.
¡ Choose the Add InfoProvider function, to add a particular ODS object or a particular InfoObject independently of the
current layout of the InfoProvider tree. You get to the dialog box of the same name. Enter the data that the system asks you
for.
If you know the technical name of the InfoProvider that you want to add, this method is quicker than switching the layout of
the InfoProvider tree.
When this function is complete, the InfoProvider that you selected is displayed in the join control. For more information on
the structure of the join control, see Join Control.
4. Define the join conditions. For more information see Defining Join Conditions.
5. You can get general information such as object version, date created and date changed via Goto ® Global Settings. You can
also set the indicator Most recent Reporting for InfoObjects from here. You can find additional information under Most recent
Reporting for InfoObjects.
6. Via the button Documents, which appears on the pushbutton bar, you can access document editing for this InfoSet.
7. You can use Check to check the correctness of the InfoSet definition. The log display is shown in the screen area under
the join control.
8. Save the InfoSet. The log display is shown in the screen area under the join control.
9. Activate the InfoSet. After activation, the system executes the checks. The result of the activation is displayed in the
log in the screen area under the join control.
Additional Functions in the InfoSet Builder
You can also use transaction RSISET to call up the InfoSet Builder when you want to edit an InfoSet. Select the InfoSet that
you want to edit. Value help is available for this. Additional functions are also available to help you edit and manage your
InfoSet.
Compare
You use this function from the main menu to check if the InfoProviders used in the InfoSet have been changed and the InfoSet
needs to be adjusted as a result. For more information, see Matching InfoSets.
Jump to object maintenance
You use the InfoObjects and ODS Objects functions to jump to the maintenance screen for the InfoProviders included in the
InfoSet definition.
Info functions
There are various info functions on the status of the InfoSets:
The Object Catalog Entry
The log display for the save, activate, and delete runs of the InfoSet.
Display in tree
You use this function to display in a tree structure all the properties of the A version (active) of the selected InfoSet.
Header data
InfoProvider and its fields
On condition
Wherecondition
The display is empty, if no active version is available.
Version comparison
You use this function to compare the following InfoSet versions:
The active (A version) and modified (M version) versions of an InfoSet
The active (A version) and content (D version) versions of an InfoSet
The modified (M version) and content (D version) versions of an InfoSet
The Display InfoSet screen appears. Depending on which option you choose, the system displays either all of the differences
between the two versions of the selected InfoSet or all of the properties of both versions in a tree structure.
Transport connection using AWB
You use this function to transport an InfoSet into another system.
The Administrator Workbench: Transport Connection screen appears.
The system has already collected all the BW objects that are needed to guarantee the consistency of the target system.
InfoSet data display
You use this function to access the data target browser. If you have already loaded data into the InfoProviders included in
the InfoSet, you can display this data.
Delete
You use this function to delete an existing InfoSet.
Copy
You use this function to copy an existing InfoSet and, if necessary, edit it further.
Show/hide technical names
You can use this function to show alias names for fields. These alias names are necessary in InfoSets, for example to be able
to map self joins. Field alias names start with F, followed by a five-digit number.
Defining Join Conditions
Use
A join condition determines the combination of records from the individual objects that are included in the resulting set.
Before an InfoSet can be activated, the join conditions have to be defined in such a way (as equal join condition) that all
the available objects are connected to one another either directly or indirectly.
Usually, however, only rows containing a common InfoObject or rows containing InfoObjects that share the same basic
characteristic are connected to one another.
Connect tables T1 and T2 using a join and set as a join condition that the F1 field from T1 must have the same value as F2
from T2. For a record from table T1, the system determines all records from T2 for which F2(T2) = F1(T1) is true. In
principle, as many records from T2 can be found as required. If one or more records are found, the corresponding number of
records is included in the result set, whereby the fields from T1 contain the values from the record from T1 under
consideration, and the fields from T2 contain the values of the records found from T2.
Procedure
There are various ways of defining join conditions:
Using a mouse-click
Position the cursor over a row in an InfoObject. Press the left mouse-button and, keeping the left mouse-button pressed down,
trace a line between this row and a row in another object. Providing that the join condition between the two rows that you
have indicated is a valid join condition, the system confirms the join condition by displaying a connecting line between the
two rows.
Using the Link Maintenance pushbutton
You get to the Link Maintenance dialog box.
In a tree structure on the left-hand side of the screen, all of the InfoProviders that are already included in the join are
displayed along with their fields or attributes. If you double-click on one of these fields or attributes, the system
displays on the right-hand side of the screen all of the fields or attributes with which you are able to create a join
condition.
In the Selection column, set one or more of the indicators for the fields or attributes for which you want to create a join
condition. The system generates valid join conditions between the fields or attributes that you specify.
You use the Delete Links pushbutton to undo all of the join conditions.
You use the All Characteristics or the Basic Characteristics Only pushbutton to choose between the corresponding display
variants.
We recommend that you use the Basic Characteristics Only option. The All Characteristics setting displays all of the
technical options involved in a join. If you are not able to find a join condition on the basic characteristic level, then
the All Characteristics setting is useful, but this is an exceptional case.
When you have finished making your settings, click on the Continue icon.
We recommend this method, because the system searches for all the possible join conditions for any field or attribute that
the user specifies, ensuring that the join conditions are defined without errors.
Using the Context Menu Left Outer Join Inner Join
Usually inner-join operators connect all the objects in a join to one another. You can also connect each object with any of
the many other objects by using a left outer join operator.
You can find additional information about usage and special features under Left Outer Join.
If you want to use a left-outer join operator to connect an object, select the object and choose the corresponding function
from the context menu.
The system displays all of the valid join conditions that originate from this object. The connecting lines that represent
these join conditions are labeled as Left Outer Join . InfoProviders, on which a left outer join condition is affixed, are
differentiated by color from the InfoProviders that are connected using an inner join operator.
If you used a left outer join operator to connect two objects, you have to make sure that all on conditions are linked except
for these two objects with the formulation of join conditions.
Note that you cannot add an object, which you have already connected by using the left outer join operator, to another
object.
If you want to use an inner-join operator instead of the left-outer join operator, select the object that you want to
connect, and choose the Inner Join option from the context menu. Again the system displays all the valid join conditions that
originate from this object, and labels the connecting lines accordingly.
Result
Once the join conditions have been defined in such a way as to connect all the available objects to one another, either
directly or indirectly, the InfoSet is ready to be activated.
You click on the Check pushbutton in the pushbutton toolbar to find out if these preconditions for the activation have been
met.
For objects that are joined by a left-outer join operator, there is one extra condition that has to be met, namely that all
the other objects have to be connected to one another either directly or indirectly.
http://help.sap.com/saphelp_erp2004/helpdata/en/ed/084e3ce0f9fe3fe10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ed/084e3ce0f9fe3fe10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/a3/96663bd194a978e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2f5aa43f-0c01-0010-a990-9641d3d4eef7
Hope itr helps
Regards
Bala
Also

What is open data set and close data set

what is open data set and close data set,
how to use the files in sap directories ?

hi,
Open Dataset is used to read or write on to application server ... other than that i am not sure that there exists any way to do the same ... here is a short description for that
FILE HANDLING IN SAP
Introduction
Files on application server are sequential files.
Files on presentation server / workstation are local files.
A sequential file is also called a dataset.
Handling of Sequential file
Three steps are involved in sequential file handling
OPEN
PROCESS
CLOSE
Here processing of file can be READING a file or WRITING on to a file.
OPEN FILE
Before data can be processed, a file needs to be opened.
After processing file is closed.
Syntax:
OPEN DATASET <file name> FOR {OUTPUT/INPUT/APPENDING}
IN {TEXT/BINARY} MODE
This statement returns SY_SUBRC as 0 for successful opening of file or 8, if unsuccessful.
OUTPUT: Opens the file for writing. If the dataset already exists, this will place the cursor at the start of the dataset, the old contents get deleted at the end of the program or when the CLOSE DATASET is encountered.
INPUT: Opens a file for READ and places the cursor at the beginning of the file.
FOR APPENDING: Opens the file for writing and places the cursor at the end of file. If the file does not exist, it is generated.
BINARY MODE: The READ or TRANSFER will be character wise. Each time n characters are READ or transferred. The next READ or TRANSFER will start from the next character position and not on the next line.
IN TEXT MODE: The READ or TRANSFER will start at the beginning of a new line each time. If for READ, the destination is shorter than the source, it gets truncated. If destination is longer, then it is padded with spaces.
Defaults: If nothing is mentioned, then defaults are FOR INPUT and in BINARY MODE.
PROCESS FILE:
Processing a file involves READing the file or Writing on to file TRANSFER.
TRANSFER Statement
Syntax:
TRANSFER <field> TO <file name>.
<Field> can also be a field string / work area / DDIC structure.
Each transfer statement writes a statement to the dataset. In binary mode, it writes the length of the field to the dataset. In text mode, it writes one line to the dataset.
If the file is not already open, TRANSFER tries to OPEN file FOR OUTPUT (IN BINARY MODE) or using the last OPEN DATASET statement for this file.
IF FILE HANDLING, TRANSFER IS THE ONLY STATEMENT WHICH DOES NOT RETURN SY-SUBRC
READ Statement
Syntax:
READ DATASET <file name> INTO <field>.
<Field> can also be a field string / work area / DDIC structure.
Each READ will get one record from the dataset. In binary mode it reads the length of the field and in text mode it reads each line.
CLOSE FILE:
The program will close all sequential files, which are open at the end of the program. However, it is a good programming practice to explicitly close all the datasets that were opened.
Syntax:
CLOSE DATASET <file name>.
SY-SUBRC will be set to 0 or 8 depending on whether the CLOSE is successful or not.
DELETE FILE:
A dataset can be deleted.
Syntax:
DELETE DATASET <file name>.
SY-SUBRC will be set to 0 or 8 depending on whether the DELETE is successful or not.
Pseudo logic for processing the sequential files:
For reading:
Open dataset for input in a particular mode.
Start DO loop.
Read dataset into a field.
If READ is not successful.
Exit the loop.
Endif.
Do relevant processing for that record.
End the do loop.
Close the dataset.
For writing:
Open dataset for output / Appending in a particular mode.
Populate the field that is to be transferred.
TRANSFER the filed to a dataset.
Close the dataset.
Regards
Anver
if hlped pls mark points

My MacBook Pro persistently will not connect to my wireless router. The message "connection timeout" appears. What is a connection timeout and how can I fix?

My MacBook Pro persistently will not connect to my MiFi Verizon wireless router. The message "connection timeout" appears. What is a connection timeout and how can I fix?

Hi there terri900!
You may want to try configuring your router settings to match the recommended settings for iOS and OS X devices, which can be found here:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
You may also find some helpful information for troubleshooting this issue in this article, which can help you with any manner of issues with Wi-Fi connections:
Wi-Fi Quick Assist
http://support.apple.com/kb/HT1145
Take care, and thanks for visiting the Apple Support Communities.
-Braden

What are the uses of MVC, Extension and how to create it for begineers pls

what are the uses of MVC, Extension and how to create it for begineers pls
dont give link for tutorials please explain ,
thank you,
Regards,
Jagrut BahratKumar Shukla

Hi,
Check out this link :
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/0f/ab3a3c9ca75402e10000000a114084/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/0f/ab3a3c9ca75402e10000000a114084/content.htm</a>
It is the best possible explanation and documentation that you'll get.
Thanks,
Tatvagna.

My itunes is playing up. every time I play a track or album I get a crackling interference noise. What's this all about and how can I stop it?

my itunes is playing up. Every time I play a track or album I get a crackling interference noise. It sometimes abates for a while but then comes right back again!What's this all about and how can I stop it?

See if this article will help:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362

I've been sent a scan of a document as an attachment. Clicking on it, I get the message, "Pixel aspect ration correction is for preview purposes only. Turn it off for maximum image quality." What is pixel aspect ration and how do I turn it off?

I've been sent a scan of a document as an attachment. Clicking on it, I get the message, "Pixel aspect ration correction is for preview purposes only. Turn it off for maximum image quality." What is pixel aspect ration and how do I turn it off?

It's "aspect ratio", not aspect "ration".
It's what determines whether you have square pixels ("normal") or, if rectangular pixels, what the aspect ratio (width : length) of that rectangle is.
It's explained in the Help files. I cannot go into more detail because you have neglected to provide information about your platform and exact version of Photoshop.
Example in next post

I forgot my security questions and I have a different email address but it's not updated to my Apple ID how can I change my security setting and how to rescue my Apple ID?

I forgot my security questions and I have a different email address but it's not updated to my Apple ID how can I change my security setting and how to rescue my Apple ID?

Alternatives for Help Resetting Security Questions and Rescue Mail
     1. Apple ID- All about Apple ID security questions.
     2. Rescue email address and how to reset Apple ID security questions
     3. Apple ID- Contacting Apple for help with Apple ID account security.
     4. Fill out and submit this form. Select the topic, Account Security.
     5. Call Apple Customer Service: Contacting Apple for support in your
          country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID

I was able finally to delete unwanted text boxes in my document; however, now my second page is missing and there are several following pages in a language that appears to be Latin. What sin have I committed and how do I atone to get my second page back?

I was able finally to delete unwanted text boxes in my Pages document; howver, the result is that the 2nd page of my document is missing and there are now several following pages in a language that appears to be latin. What sin have I committed and how do I atone?

10 marks for recognising the Latin (sort of) that is the placeholder text in your template.
You are using a Word Processing template. WP templates have content flowing from page to page. As one page fills up, a new one is created. If some of that text is deleted or displaced the pages retract.
When you combine text, invisibles like word spaces, returns, tabs, page breaks etc with objects that have text wrap set, the mix can behave in an apparent odd fashion.
Start with showing where everything is:
Menu > View > Show Layout/Invisibles
Start with getting rid of any excess returns you may have used to "position" things. Next cut and paste objects like textboxes, shapes, charts and tables "Inline" ie in as part of the text. If necessary also turn off text wrap on objects or minimise it so that doesn't push text completely out of the way.
Insert Section breaks in the Text where you want fixed breaks in the layout these will provide separation between layout on different pages.
Basically you need to clean up your layout or think about doing it another way.
If there is a lot of layout, you will need to learn Pages methods for doing this in a WP template or do it in a Layout template where each page is individual and all objects are floating with no default text area.
Peter

What's the implicit joins and how to configure it?

Hello guys
what's the implicit joins and how to configure it? What's the purpose of implicit and explicit joins?
Please help
Thank you

Thus, on my side, I think that :
Explicit join define the join condition between the key column from the table.
(table1.di = table2.id)
While
Implicit Join define :
* the type of join outer, inner, ...
http://gerardnico.com/wiki/dw/join/start
* And the relationship (one-to-many, cardinality)
http://gerardnico.com/wiki/dw/data_quality/relationships
And all this information are used to generate the statement (query).
And I don't really know why you have two type of key :
* Physical Foreign Keys
* Logical Foreign Keys
Regards
Nico

What is correlation ? when and how to use it in BPEL process?

Hi,
What is correlation ? when and how to use it in BPEL process?
Thanks

Hi:
Take a look at this entry http://blog.andrade.inf.br/2010/03/oracle-bpel-11g-correlation-sets.html
thx
best

What is a help set and how to create one.?

Similar Messages

Maybe you are looking for