. What is a process code in ALE
. What is a process code in ALE
could u plz explain clearly
hi,
a process code represent function mod.,
Process code will come in to picture when you deal with IDOCS .. you need to assign a code which internally will have a Function module or a Include, that will have entire code to run your bussiness for an IDOC or EDI or ALE.
reward useful points,
siva
Message was edited by:
Shan
Similar Messages
-
What is a process code in ale idoc
what is a process code in ale idoc,what is the purpose of Process code.
Hi,
Let me tell some scenario then u would be able to understand what a process code is-------
In ALE ie, the data requested system is receiver and the data already presented system is sender ie, from where we are having the data,
here in sender side----
we need a program to tranfer required data into idoc--( idoc is just a data container ) in sender side this program logic is in a function module it is configured in we41.
ie this will transfer the data from database to idoc----in sender side it is a process code
and in receiver side after receiving the data we have to post it in database again program needed it is also ie the required code is also in function module it is configured in we42
it is about receiver side f.m or simply process code
okkkkkkkkkkkk -
Need of Process code in ALE Inbound Processing?
Hi All,
What is the need of process code in ALE Inbound Processing? Why do we need to reach the function module through process code? we can as well directly point to function module.Hi Ravi,
Please chcek this link perhaps it may help.
http://help.sap.com/saphelp_erp2005/helpdata/en/dc/6b804043d711d1893e0000e8323c4f/frameset.htm
Regards,
Ferry Lianto -
What is the process code for Message type FUNDMA
Hi,
I am sending CO elements to the distributed server using ALE. Can somebody tell me what is the process code for the message type FUNDMA?
Thanks
WilliamCheck entries of table VEDI_TMSG1. This contains Message types and associated Process codes.
Hope this helps.
ashish -
What is the process code for message type FIXEDASSET_CREATE?
Hi all
please tell me that what is the process code for
MESSGAE TYPE = FIXEDASSEt_CREATE,
FUNCTION MODULE = IDOC_INPUT_FIXEDASSET_CREATE,
BASIC TYPE = FIXEDASSET_CREATE01 ?
thanx in advance.......
Edited by: Prachi Sharma on Jan 11, 2008 7:45 AM
Edited by: Prachi Sharma on Jan 11, 2008 8:03 AMHi,
Check the Tcodes WE41 and WE42 for Outbound and Inbound process codes
Check below Tables as well
EDE1T
EDE2T
EDE5T
EDE6T
TEDE5
TEDE6
Regards,
Satish -
1.What is A process Code?
2. How to associate a process code with an output type ?Hi
Process Code turn drives which Function Module to use,which in turn will determine the content of the message.
This link will be helpful for teh second query
<u>http://logosworld.com/www7/EDI/HTML/IDocBook.htm</u> -
What is outbound process code for quotation
hi
what is outbound process code for quotationProcess code for outbound processing - Code which identifies the type of data which is to be sent via the IDoc interface.
Use - Using the process code, the IDoc interface finds the application selection module which converts the SAP document into an IDoc.
The process code is only used with applications which perform outbound processing via Message Control (NAST).
Check with tcode WE41
Process code SD12 - QUOTES: Quotation
Regards,
maha -
Message type, Idoc type and process code in ALE/Idoc
Each Idoc version(creams01 or cremas03) will have seperate process codes in Inbound process?
Whether Message type triggers the process code or the Idoctype/idoc triggers the process code in Inbound process?
regards
Message was edited by: henryHi Henry,
About your question as how should you assign seperate process code for the same message type ( with different IDoc Type )-
In We42, the message type can be assigned to the processing code. But here you will find that along with message type there are two more fields - Message Code & Message Function.
You can use any one these to serve your purpose.
e.g. you can assign
-process code P1 to message type M with Message code 1
-process code P2 to message type M with Message code 2
Further these process types can be configured to call separate FMs.
Now depending on IDOC types your external system should populate the message type as well as Message code so that accordingly process code will be determined at the time of inbound processing.
I hope it's clear & correct
Thanks,
Ram -
What is the Process code for IDoc SISCSO01
Hi all,
I am using 4.6c version.
I am going for an outbound IDoc SISCSO01 for sales Order confirmation.
I want the process code (we41) which suits this IDoc SISCSO01.
Can you please help to get the process code so that my IDoc can be sent succesfully.
Best Regards,
GangoluHi Gangolu,
I don't think there is an outbound process code for IDoc type SISCSO01.
But you can generate the IDoc with this FM <b>MCV_STATISTICS_ALE_OUT_ORDER</b>. But you still need to setup partner profile, distribution model and etc.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful. -
PROCESS CODE IN RECEIVING SYSTEM
Dear gurus,
What is the process code in receving system in ALE.
should we create a new process code or select the process code from exists.
advise please.
Cheers,
R.Rajendranprocess code will invoke related function module
you need the process code to determine which Function is used for creating/processing the IDoc.
Go to WE20 (Partner) and choose you inbound processing messages.
In the first tab you´´ll find the processing code.
Transaction: WE42 to define the processing code
Tcode: WE57 and BD51 to map the Function to this processing Code.
Process Codes will be linked to the inbound function module which in turn will read the data from the inbound idoc and post in the application document.Jus double click on the process code it will take you to the corresponding function module. -
Can any body tell me about process codes, What exactly the significance of Process codes in the outbound and inbound system?
What is the use of process code in ALE/IDOC scenario? and where will u create the process codes.?Hi,
Just check the tcodes we41- outbound and we42-inbound. You can find out all related process codes . when you select and look this will be having related FM.
Kindly go thro this link, u will get idea abt process codes.
http://help.sap.com/saphelp_47x200/helpdata/en/dc/6b805a43d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/dc/6b804d43d711d1893e0000e8323c4f/frameset.htm
Regards....
Padmam. -
PROCESS CODE FOR PURCHASE ORDER
Hi Friends,
what is the process code for Purchase order... because i need to creating a partner profile in WE20 in the inbound side.. if iselect message type ORDERS menas.. that related.. process code( for purchase order is not displaying)..
can any of you give me the <b>Message type </b> and that related <b>Process code</b> for <b> purchase order</b>..
thanks
BabuHi Babu,
You will find out the all Process Code from WE41 for Outbound & WE42 for Inbound.
The Process code for ORDERS: Purchase order is ME10 for Outbound and you can find it out the message type for Inbound from WE42.
If need more info let me know..
Cheers
Veera -
Hai Friends
I created new CUstom idoc for BETMAS01.
Please give response to the following topics.
1)What is the process code or TCODE of BETMAS01 (Site master).
1)How to raise the outbound idoc automatically when the site data was created?.
Advance Thanks to all.
WIth regards
KrishnaHai Friends
I created new CUstom idoc for BETMAS01.
Please give response to the following topics.
1)What is the process code or TCODE of BETMAS01 (Site master).
1)How to raise the outbound idoc automatically when the site data was created?.
Advance Thanks to all.
WIth regards
Krishna -
Process code for inbound credit Memo
Hi All,
May know what is the process code for inbound Credit Memo (Return of Goods)
Thanks,
MatthewHi Gautham,
I checked the IDOC in BD87 tcode and it is saying "Function module not allowed: IDOC_INPUT_ORDRSP".
I gave ORDR as the process code in the inbound parameters of the receiver system partner profile.
In the sender system, I gave me10 as the process code. And there the status is 12, so everything is fine over there.
Vishwa. -
Inbound 810 Invoice - Process code
Hey,
Can any one say me what is the process code for inbound 810.
Should i use INVL nor INVM.
please advise.Hi
I am working on the Invoice receipt thru EDI-IDoc from Vendors (EDI-810 INBOUND). I am getting certain errors.
Error 1:
Customer , Vendor XXXXXXX not known
Message no. FD110
Error 2:
G/L Account XXXXXXX can only be posted internally.
Message no. F5562
I have tried to trigger IDocs using basic types INVOIC01 and INVOIC02. But all in vain.
Please rush your answer,
Cheers
Maruthi
Maybe you are looking for
-
Here is my JSP code <h:dataTable value="#{manageAssetMB.currbean.allAttrAssociations}" var="currAttrAssoc" > <h:column> <h:outputText id="input" value="#{currAttrAssoc.attr.name}" /> <h:outputText value="*" rendered="#{currAttrAssoc.mandatory}" /> </
-
One short beep and one 1 beep on hp pavilion media center 8120n
My tower is not booting up when I turn it on. My son took the side off and was going to put more memory in it for me, but in the end he didn't. He put the old memory back in and put the side casing back on. Today, when I turn it on, it has 1 short
-
Any ideas are appreciated. Photoshop and Bridge are set to English, but every time I open camera raw it is set to Spanish and I can't figure out where to change the language. Mac OS 10.4.1 Thanks
-
Deleting plot from Waveform Chart
How can I delete a plot from a Waveform chart using the chart's Attribute Node? Thanks!
-
Hi All, We have two oracle databases and I would like to compare the structure changes in tables, views, procedures, functions etc. I found a very good tool (i.e. DBDiff for Oracle) but its Demo and only doing first five structure changes. Does anyon