What is a recommended Graphics card for G4MDD running tiger and sometimes..

What is a recommended Graphics card for G4MDD running tiger and sometimes 9.2.2
I really need to have both in accelerated mode, looking at my stats I currently have 9000 PRO with 64mb ram... don't need it for games but high end graphics applications currently using Starta Pro 2.5.3 on 9.2.2 which for my current purposes is afficient

The 9600 runs like crap in OS 9.2.2 with any ATI software you can find because ATI never wrote OS 9 drivers for the 9600. OS 9 ATI software does not recognize the card. You get a basic 2D monitor output that is soft, dull, slightly off-color, and cannot be enhanced with the Monitor's Control Panel calibration utility.
If you spend any amount of time in OS 9.2.2 or you want to use OS 9.2.2 for any of your old games (even 2-D video clip type games), don't get the 9600.
I have a 9600 installed in my MDD G4 and now have an original Radeon for Mac PCI video card installed as well. When I want to use any of my OS 9 games, I move the DVI cable from my LCD monitor over to the old Radeon card and restart.

Similar Messages

Recommended Graphics Cards for Encore / Premiere

Hi-Dee-Ho Everybody:
I started a thread yesterday regarding trouble I am having with Encore CS4, specifically, my "Monitor" window just stops, well, monitoring after a short time while manipulating fairy straight forward 720x480 AVI files. Rather than reiterate it all, here's the link:
http://forums.adobe.com/thread/555265?tstart=0
It's a new system that I'm using. I had been using Encore successfully for the last 6 months on an older, slower machine - Windows XP Home, 4GB memory, ONE processor core.
Everything about the new system should improve the performance of Encore: 8GB of memory, Quad Core, 2.5GHz a HUGE harddrive. The only two things that I see could be the cause of my new problems are:
Windows 7 Home Premium
Different Graphics Card (Intel G43/G45 Express)
I've updated EVERYTHING: Windows 7, display drivers, card drivers, the Roxio PX Engine (4.18.16a). All that's done.
I've heard from many people that they are getting along fine with Windows 7. I am leaning towards this graphics card as the problem. The system was, overall, a great deal but I neglected to ask about the the amount of graphics memory in it.It's just one of those mother board embedded scenarios. I don't know if I should expect much from it.
So, I was wondering if anybody had any experience with this "card". If not, I was wondering if there was a recommended graphics card for Encore and Premiere. A minimum recommendation for graphics memory?
Thanks!
Mark Roberts,
Toronto

Mark,
Many have had problems with embedded Intel graphics chips and various Adobe programs.
For the vast majority, replacing that with either an ATI, or nVidia, has solved the issue.
Though it is overkill for general NLE and authoring, I love my nVidia Quadro FX-4500-512MB has worked perfectly. It is older, and more than you need.
On my laptop, my nVidia GeForce 8800M GTX 512MB has also performed very well.
One is a higher-end, albeit older, 3-D card, and the other, a "mobile" card. What I am getting at is that most of the offerings from ATI, or nVidia should work perfectly, and better than the Intel chip - plus either source will provide many more new drivers, and in a much more timely fashion, than the Intel.
Good luck,
Hunt

HT4664 What is the best graphics card for FCPX?

In the nonstop anti-FCPX propaganda is an article of interest — posted 7/9/12 — comparing the benchmarks of FCPX and PP6.
http://www.streamingmedia.com/Producer/Articles/ReadArticle.aspx?ArticleID=83582 &PageNum=1
The system used was a 2 x 2.93 GHz Quad-Core Mac Pro from early 2009 running MacOS X version 10.7.4 with 12 GB of RAM and an NVIDIA Quadro FX 4800 graphics card with 1.5 GB of onboard RAM.
In most cases PP6 outperformed FCPX with this configuration. However, in the comments Ben Balser pointed out that FCP X's A/VFoundation engine wasn't ideal on the NVIDA card:
"Quadro is actually not the best card for FCP X's A/VFoundation engine, but great for CS6's Mercury engine, so the test is amazingly flawed right there. Try both on a 5780 card and watch things drastically change. I've done that test myself. Exporting to Compressor uses a MUCH more sophisticated encoding engine meant for higher level, professional transcoding, not simple outputs, which are faster using Export Media…"
Apple lists this card on its support page: http://support.apple.com/kb/HT4664
So,
What is the best graphics card for FCPX?

Ben,
Thanks for chiming in on that article. It would be good to have a benchmark comparison with the two systems each with a preferred card.
I'm hoping to see some other comparisons on this thread. Also, some links to other articles about best practices and configurations.

What's the best graphic card for FCP X and a Mac Pro (early) 2008?

I have a Radeon HD 3870 in my Mac Pro, it seems that I cannot use this configuration with Final Cut Pro X. Then what's the best graphic card for FCP X usable in a Mac Pro (early) 2008?
Thx,
Phil

You can get a 5770 radeon ATI MAC card
Avoid the 5770 cards on ebay and Amazon - many are black market or manipulated cards.
Buy it from Apple online store or B&H photo or Macconection
And in my case, I was able to sell my old 2600 XT card on ebay for $65 and put that money toward a 5770 card (Which was about $230 minus the $65)
I installed the 5770 in my early Mac Pro 2 x 2.8 and it works great

What is the Best Graphics Card for G4 Gigabit Ethernet?

Hi, i use my trusty g4 dual 450 at the moment and i cant help but feel sorry for it.
I think it could do with a bit more ZING
I was looking though some of the graphics card upgrades avalable and i want to make sure i get the best
that i can get for it. I thought the ATI Radeon 9800 pro with 128mb vram was the best i could do but lately
i found better ones that would supposedly work with it.
Can anybody help out a die-hard G4 fan and say whats the best my mac can handle?
Oh yea, I want to see if i can manage to play minecraft well/desently on my mac
and i have my eyes on some 1.6 ghz and 1.8 ghz processors on ebay to help do this, think its a good idea?

I was hoping japamac would reply first, but...
See japamacs page here on the best AGP cards for G4s & G5s...
http://www.jcsenterprises.com/Japamacs_Page/Blog/4B4B7BA2-7ABB-47F1-87AC-B03D379 42BEE.html
You need an AGP 2 x card.

What is the best graphics card for my Powermac G5

Hello every1 @ discussions.apple.com!
I am thinking about upgrading my Graphics card. Currently I have a radeon 9600 in My powermac G5 (early 2005 2.3 ghz dual), it works fine but its a bit slow and drops frames on anything HD. I have been looking around and the best card that i will not need to flash/format to work would probably be a NVIDIA GeForce 6800 GT DDL (I really dont want to have to flash the card as it seems like a slightly complicated process and i would like to keep within all the manufacturers warranties).My main goal is to obtain the best card possible for HD video editing or viewing. I was wondering if there where any superior cards available for my mac that would serve those purposes better.
Many thanks in advance.
All the best.
Dc

The performance differences vary by software in use.
Some software runs better with a Geforce, other with a Radeon.
The Radeon cards will do better with games, but the Geforce will likely do better with 3D and pro apps.
http://www.barefeats.com/radx800.html
As far as viewing HD, any one of the cards will give additional horsepower.
I use a Geforce 6800 GT and a Radeon X800 and I don't see any difference between the two with regard to handling video.
Of course, the two cards do much better than the Radeon 9800 series or other offerings OEM.
After that, it's all up to the CPU, free space on the boot drive and RAM.
Oh, yes, one other benefit of the Geforce is two DVI ports.
The OEM Radeon cards each have one ADC, one DVI.

Graphics Card for Motion 4, RAM and processor upgrade

I am using a dual quad-core Mac Pro with 8GB DDR2 667MHz RAM for FCP and Motion. I have a NVIDIA Quadro FX card which does not work with Motion. Any suggestions on the card? I am looking into ATI 4870. Also, would like to put in some more RAM..any suggestion? I am looking at products on www.crucial.com
Also, does putting two graphics cards help at all?
Considering processor upgrades..will it be worth it?
Thanks in advance for your responses and time.

Also, does putting two graphics cards help at all?
No, unless you need more than two displays.
Considering processor upgrades..will it be worth it?
No.

Advise on dual 1.25 G4 graphics card upgrade to run Motion and Shake.

I have a dual 1.25 GHz G4 PowerMac running 10.4.7 and would like to use Motion and Shake. Motion will not install with the factory ATI Radeon 9000 Pro card and Shake requests OpenGL support so I did not bother trying the install.
I'm considering the Radeon 9800 PRO or the GeForce 7600 GT
I'm also running an ACARD 6880M raid card for storage and hope to avoid any conflicts.
Any advise is much appreciated.

You should be able to get an AGP GeForce 7 series card. It's either a 7600 or 7800, but beyond that I can't remember. Of course, you'll have to flash it, possibly solder on a 128K EEPROM, tape or cut some pins, make sure you have a strong enough power supply...
Your other options are a Radeon 9800 Pro or GeFroce 6800 (Ultra, GT?). You can probably find a PC Radeon 9800 Pro 256MB card (make sure it has 8 memory chips instead of 16, is not AGP Pro/Double-Wide, is prerferably DDR and not DDR2, and to avoid soldering try to find one with a 128K EEPROM - which would never be specified on a site or anything). Again, you'd have to flash it and tape some pins as they're meant for AGP8x slots. They also don't fit well if you try to change their fan/heatsink, or so I've been told.
Definitely max your RAM, but maybe avoid PC3200 memory modules. ; P

What is the best graphics card for me

i have a G5 dual 2.0Mhz (not intel).
i upgraded to an ati radeon 9800 with 256M of memory and performance did improve over my 9800 with 128M of memory. however, i am still experiencing some slow downs that i suspect are graphics-related. what is the BEST option for me?

Absolutely agree with Mike. My X800 is wonderful. I never really did A/B tests with the original 9600 but Aperture is very pleasant with the X800.
Sam

WHAT IS THE BEST VIDEO CARD FOR FINAL CUT PRO and MOTION?

Hello folks,
I have found a lot of posts regarding all kinds of troubles with ATI READEON X1900 video card.
When I talked to people from Apple, trying to decide which videocard to install in new MAC PRO, Ati Radeon X1900 was the one they did recommand for FCP and Motion. So are there any other cards which would actually suite better for Final Cut Studio2, or is Ati Radeon X1900 really the one to go with?
Thanks for any suggestions,
Kootenay

Techreport has some more information on the new 55nm Radeon (X3000) which should be another "mid November" releases, as well as an updated 8800 GT that still is under wraps.
So seems Intel and everyone else is trying to get new products out before the end of the year, if possible.
Drivers for graphics controllers may or may not need the work that sometimes seems to plague companies.

Is nVidia Geforce GT640 good graphics card for PrE10 despite low memory bandwidth?

Can anybody confirm that the nVidia Geforce GT640 is a reasonable graphics card for Premiere Elements 10 and Photoshop Elements 10?
The person who assembled my Core i7 3770K desktop with 16Gb of RAM at 1600mHz installed the nVidia GT640 card with 2Gb of DDR3 memory. He said that this was a good (fairly low cost) card for video editing because it has 384 CUDA cores - very helpful in video editing. I am pretty ignorant about graphics cards, but like the low power usage, 65 watts, and reputed cool operating temperatures. I have since read that DDR5 memory would have been much faster because of greater memory bandwidth - say 80-90Gb per second compared with 28.5Gb per second for the DDR3 memory on the GT640 card. I was after economical power use. DDR5 cards use 110 watts upwards and run much hotter than DDR 3 cards, all other things being equal. The really fast cards require special power units and cooling.
Does anybody know whether limited memory bandwidth is important in video editing? Is speed much more critical in gaming than in video editing? Are other attributes such as 384 CUDA cores, nvenc syncing, dedicated encodment, 28nm Kepler architecture, 2Gb memory frame buffer, 1.3 billion transistors, plenty of texture units - more important than memory bandwidth in video editing? Does bandwidth limited by DDR3 memory affect quality of image?
I read that the GT640 would be much faster (producing better image quality?) than the HD4000 integrated Intel graphics of the Core i7 Ivy Bridge processor. Is this so?
Windows 7 Home Premium 64 bit and all programs are installed on a 120Gb OCZ Agility 3 solid state drive. My data drive is a 1Tb Seagate SATA 3 at 7200 RPM. I have a beautiful 21 inch ASUS vs228n LED monitor and LG blu-ray burner.
I did lots of editing with PrE 3 with a Dell 3.06 gHz hyperthreading desktop and Win XP. The output and even the preview monitoring was clear and stable. I am still capturing standard definition mini dv tape by firewire from a 3MOS Panasonic handycam, but plan to upgrade to HD 3MOS with flash memory. I make the preview monitor really small - about 7cm wide - in PR10, because the quality of the preview picture is much poorer than the quality that I experienced with the Premiere Elements 3 program with Win XP. Is this just an indication of memory-saving in PrE 10 previews? I expect output to be much superior, although still mpeg2-DVD quality until I upgrade my camera. I have set rendering on maximum bitrate.
Anyway, despite these reservations with preview quality, the GT640 seems to be performing fine. Picture quality in Photoshop, online and elsewhere on my computer is excellent.
I updated the nVidia display driver only yesterday to version 306.23.
Nearly all graphics cards forums are about gaming. I hope to see more forums about graphics in editing here.
What do you think of the 2Gb nVidia GT640 for editing with PrE 10 and Photoshop Elements 10? What would you say about picture quality in the PrE 10 monitor versus quality of output? Was picture quality in the PrE 3 monitor sharper and more stable, as I imagine?
Regards, Phil

Sheltie,
Thank you for the kind words. We all work very hard to help others with video-editing. Some of us also show up on other Adobe forums, depending on the products that we use most often.
Besides helping out, I also find that I learn something new every day, even about programs that I have used for decades. Heck, I just learned something new about PrE vs PrPro (my main NLE program), when I went to try and help a user. I probably actually use PrE more to test my theories, or to replicate a user's problem, than I do to actually edit my videos. Still, when applicable, I do real work in the program.
With about a dozen "regulars" here, if one of us is not around, several more usually are. Personally, I do not understand how Steve Grisetti and John T. can dedicate so very much time here. Steve is a noted author of books on PrE, PSE, Sony DVD Architect, and others, plus helps run a video/photography Web site, Muvipix.com, that is very active, and has so very much to offer. John T. is always under the watchful eye of The JobJarQueen, and gets dragged, kicking and screaming, out into the yard, or up on his roof, so can be gone for a bit.
Neale usually beats us all, since he's in the UK, and normally answers all the questions, that come in too late for us to see. He is also a PrE power-user, so beats me hands down.
I travel a great deal, but no one ever misses me. Was supposed to do a trip to Sydney last Dec., but had to cancel. Have not gotten details on the reschedule of that trip, but it would have been my first jaunt south of the Equator. Gotta' make that happen.
Good luck, and happy editing,
Hunt

Best Graphics Cards for Motion 4

Hi All, what's the best graphics card for Motion 4. The The Nvidia GTX 285 or Radeon 4870
My Mac is a 2009, Dual 2.26, 12GIG Ram, External Raid 5 and running 10.6.2
All Motion files and media are stored on the raid running eSata
Thanks.
Message was edited by: addy77
Message was edited by: addy77

We've been waiting for a Macintosh version of the 5870 for more than a year. Get the 4870, learn the application, buy a new card if you can make money with it.
Waiting for the next iteration of Mac-compatible graphics cards is a waste of time if you need to get to work.
bogiesan

Any recommendations for a new Graphics card for Mac Pro?

Any recommendations for a new Graphics card for mac pro edit in Premiere 2014 and I need to have output to a monitor my current graphics card is ATI Radeon HD Graphics 5870 1024 MB I find better for what I need?

Look at this EVGA card for the Mac

Recommended Graphics card and processor for Equium L20-264

Hi,
I was wondering what graphics cards are compatiable with equium l20-264 because i have a standard ATI eXpress radeon 200M (rubbish) and wanted to upgrade my graphics card but i am a beginner i have upgraded my ram but really need a upgrade for my graphics card for a batch of games for vista (you are probably thinking how i got vista on a non-vista laptop ^_^)
I also wondered if i coould upgrade my proccesor to a better one something like 1.0 GHZ to 2.5 GHZ but a celeron one so i don't have to get a new motherboard.

Hi
I will not recommend any graphic cards for this unit because its generally not possible to replace or upgrade the graphic card chip on the notebooks.
The CPU upgrade could be possible.
The CPUs on the newer generation of notebook motherboards are not soldered and it could be possible to remove it.
BUT the CPU upgrades are not advisable because
- firstly you will lose the warranty and
- secondly the notebook could run unstable because of the higher temperature.
However, I found some compatible Intel Celeron-M CPUs which are supported by motherboard:
Intel Celeron-M 350 (1.30GHz) FSB: 400MHz
360 (1.40GHz)
370 (1.50GHz)
380 (1.60GHz)
bye

What is the best Graphic Card Option for me?

I have a first generation Quad Core Mac Pro with a Radeon X1900XT with dual DVI Connections for my two older Apple 24" LCD Displays. I want the best card to run Adobe CS5 and support dual DVI for my 2 monitors. I was told maybe the ATI 4870 or 5770. What would be the best card for CS5 and Final Cut Studio?

300 dollars.. 250 for the backplane board(661-5706), and for the single processor tray(661-5707) - your price may vary.. I got mine for 50 dollars.
so, for 300 dollars.. you can make your 2009 mac pro into a 2010.. and yes, you can use the same existing processors.. the good news is that 1333 mhz memory works with the following processors in the new board: W3570, W3580(High end 3.33 2009 mac pro quad which was 1400.00 extra as a configure to order on apple's store from a 2.66 quad-core at 2499.99), and finally the W3680.
I am running still my w3580 with now 8GB of DDR3 1333 mhz memory.. it was 1066, but i got 1333 for a great price..
If you want to know more information about this, please send me a private email.
I can help you if you want..
Please note: if you have the 4870 HD Apple version, and not pc flashed, the sensor reading is too high for the 2010's firmware... you will need the GT120 or the 5770 graphics card.. 5870 is not going to be available for sometime and there is rumor from AMD themselves stating the card might be EOL..

What is a recommended Graphics card for G4MDD running tiger and sometimes..

Similar Messages

Maybe you are looking for