What is a request

hai all..
can any one explain me in detail,what is a request and what are the types of requests and what is the difference between a transport request and a customizing request and what is a workbench request...
no URL's Please....
will be rewarded if helpful
Regards,
Jhansi

Hi Jhansi,
you can create 2 type s of requests
Workbench Request & - Used for Objects like programs ,domains etc
Customizing Request - used for data
But you can also create Transport of Copies to transfer data.
Change Requests
Change requests are managed by the Transport Organizer. Changes to Repository and Customizing objects are recorded in change requests.
So that you can differentiate between global changes to the system and client-specific Customizing settings, the CTS records your changes in either a Workbench request or a Customizing request:
Workbench Requests
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
Customizing requests
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
See also:
Configuring Transport Routes
Request Types and Task Types
http://help.sap.com/saphelp_erp2005vp/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm
regards,
keerthi

Similar Messages

What is customizing request?

what is customizing request?
regards,
phani.

Hi Phani..
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
You can see good details on this thread:
Re: customising and workbench request
and if you need any extra information just have a look in these
http://help.sap.com/saphelp_sm40/helpdata/en/b5/90cd3a21873650e10000000a11402f/content.htm
http://web.mit.edu/ist/org/admincomputing/dev/qa_tr_faq_production.shtml
http://help.sap.com/saphelp_nw04/helpdata/en/3b/dfba3692dc635ce10000009b38f839/content.htm
http://www.planetsap.com/cts.htm
http://www.sapbrain.com/TOOLS/CTS/CTS.html
If it helps Reward with points
Regards Rk
Message was edited by:
Rk Pasupuleti

What is the request state value to shutdown VM using hyper-v?

As we know request state value 3 is used to turnoff VM , what is the request state value to shutdown hyper-v VM ? Is there any different ways to shutdown hyper v VM using C# wmi?
Regards
Venki

This forum is for Windows Embedded Standard 8. Please post to the hyper-V forum is here:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverhyperv
www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET

What is spool request how to give it

could anybody inform me
what is spool request how to give it
thanx
regards
kals.

Hi
When ever you run a job, system creates something called as a spool request.
You can have a list of all your spool requests in T.code SP01 and SP02.
The spool is usually identified by a number.
When you select a spool and select the display button it gives the output of the corresponding job.
Regards
Aravind
<b>Assign points if useful</b>

What is full request? and repair full request?

Hi experts,
please let me know what is full request? and repair full request?

Hi Suman,
Delta loading not possible if FULL requests already available in ODS from same datasource & souce system combination, In order to delta's FULL requests should be changed to Repair FULL full requests. Then system allows Deltas.
<a href="http://sapbwneelam.blogspot.com/2007/09/how-to-do-delta-loads-after-full-loads.html">Repair Full Request</a>
Hope it Helps
Srini

What is repair request? when we use this?

Hi all,
what is repair request?
when actually we use this?
Thanks& Regards,
Ravi Alakuntla.

Hi Ravi,
When you find some records missing when deltas are running then instead of going for re-init and again deltas you can go for repair full request giving selection conditions for those missing records, without affecting your delta laods.
Hope it helps,
Sunil.

What is Change Request?

what is Change Request?

Hi,
Change request are always created whever you made some change.
Tcode Se09,se01,se10 etc are used for transporting elements or obj from one place to another.
check the links.
http://help.sap.com/saphelp_sm32/helpdata/en/42/157408dd674a9cbc099f634e9bd069/content.htm
Transport Request within same Server Different Clients
http://www.sap-img.com/basis/transport-request-within-same-server-different-clients.htm
Please reward points.

What is outer request?

What is outer request and where is it stored? Will the page flow variables be the part of outer qeuest?
Please give me a very meaningful reply.Thanks, I appreciate it.

OuterRequest is the normal HttpRequest , however portlets get a scoped request (presumably using HttpServletRequestWrapper) so that if say PortletA and PortletB are on the same page and porteltA has a pageflow which does request.setAttribute("msg","in A"); and portletB does request.setAttribute("msg","in B"); then each portlet will get to show its own message. if we directly used the standard request , we would get only one message since one would be overwritten as the key to setAttribute is the same.
Nope pageflow variables are part of the pageflow which as you have seen is stored in the session.

With what type of requests sd consultant usually work?

with what type of requests sd consultant usually work?

Chandu, chill out on the rapid-fire posts here. You are clogging up this forum. Do some research on your own. Sounds like you will need to do a lot of research

Any direct method to see what my transport request contains ?

Hi *,
I have 2 doubts.
1) I have a query already existing. Now I have created a web template of it. When I transport the query, is it that the web template automatically transports along with the query or we need to explicitly assign the request to web template ?
2) Is there any direct method(table or program) to know what are the objects contained in a transport request. I have hundreds of queries categorised into various transport requests. Some also contain web templates, InfoObjects etc. In a single shot I want to know what a particular request contains.
If I use SE09 or SE10, the UIDs of the query elements are displayed which I need to put in the table RSZELTTXT and see the description. This is making our task cumbersome.
Please let me know if we have any direct method so that I can assign points to the useful answers.
Regards,
Srinivas

Hi Mr Kapadia,
Appreciate your prompt reply. I have assigned you points.
But one thing - here I can see all the UIDS in a single instance for the request, but if I need to know what that UUID refers to - a query , web template etc or what then it could have completely solved the issue.
If you can find any table which also contains the descriptions and waht type of object it is do let me know.
Anyways, I guess this is a useful info for everyone.
Regards,
Srinivas

Custom Component : How to detect what charset the request used?

I want to write a file upload component, this component must use the same charset as the request used to decode file name from data post from web browser, How to detect what charset the request used?

Hi Eddie,
As Arjit suggested, there are a bunch of functions available in WEBI like GetDominantPreferredViewingLocale(), GetLocale() and GetPreferredViewingLocale(), etc. that you could use.
There are no such specific functions provided within Dashboards tool.
So, you can create a WEBI report, and have one of these formulas specified in a variable in the webi report. Then, have the block published as a BIWS and use this BIWS in your dashboard.

What does transport request do?

I read ab to know out the 3 -system landscape . Now I want a clear idea of what the transport request does. I also want to know how the configuration is transported between development and QAS or production client.

Radhika,
The Correction and Transport System
Changes created in the development system must somehow be moved, then incorporated into the test system, then subsequently moved and incorporated into the production system. The SAP Correction and Transport System (CTS) serves this purpose and is the vehicle by which SAP moves objects such as programs, screens, configurations or security settings from one system to the next. Additionally, the CTS ensures consistency between systems by maintaining log entries for any attempted or completed activities. If used correctly, the CTS creates an effective and standardized procedure for managing and recording changes made to the system while providing an excellent mechanism for integrating either newly created objects or existing objects that have been altered to meet the customers needs.
Follow the link for some useful material on CTS
http://www.planetsap.com/cts.htm
Hope this helps
Vinodh Balakrishnan

Problem getting what you had requested error message

Why am I getting the message "Sorry, we had a problem getting what you had requested, try back later" instead of the player?

This happens quiet often on random profiles on MySpace, slideshows and music players.One time the same shows and players load and play correctly then next time I go to that same page th4 same player or slideshow gives me an error message...... while at that very moment some of my friends are having no problem accessing those same shows and players.
I also get an error message on some profile slideshows that says something like No Images in Album or Album May Be Set To Private when some of my friends have no problem viewing the slideshow and never get an error message. When I contact someone I know when I experience the problem with one of their slideshowsor players they say the settings are correct and I should be able to view it. Aggravating to say the least....

What file was requested when play() is ran on the client

I have been looking for a way to tell what file was requested from within a VOD app when a video is played. I want to use the file name for something else but I dont want to have to send it with a second argument in connect().
Is it possible to tell what file is requested??? If so how can I do this??

well to do so you will have to write server side code to look at the stream and then request
the name its in the serverside language refrence.....after you get the name you will have to call to the client with the name.....sending the name through oncConnect probably has the least over head.

What r spool requests and procedure of configuring printer in SAP

Hello Experts,
i hv one question? wt r spools and wt are spool requests ? what are they used for? also i need a step wise step procedure for configuring printer in SAP . My email id is [email protected] . Requested to revert at earliest as this is very urgent.
points guaranteed.
regards,
Somya

hi
whenevr u print ur output , spoll no. will be generated.
Go to TCode Sp01/SP02 and give the spool No. which u generated and there u can find ur spool with outputlist,
The basic transaction to set an printer within an SAP system is SPAD.
I would recommend you to access the online SAP help at the following URL where you will find detailed information on how to set printers :
http://help.sap.com/saphelp_46c/helpdata/en/d9/4aa45b51ea11d189570000e829fbbd/frameset.htm
regards
ajai

What is a request

Similar Messages

Maybe you are looking for