What is a Secure remote Control solution for ipadv3 to osx 10.8?

I have a desktop and a laptop that I need to control via remote using my iPad 3. I am an administrator of a small network and it is against co policy to use vnc as my MacBook opens up with my access when I control it via vnc/apple desktop sharing. I need a more secure rdp like solution. I cannot use any external solutions like log me in, go to my PC... or the like. re: Against co policy.
I opened two tickets and asked one simple question. Can apple confirm that no apple so has a secure remote access feature built in? With confirmation I can justify having to purchase or develop a solution. They would not admit it.
Rdp is mediocre and somewhat secure. What is the issue for apple to use it for their so?
How about Remote Desktop via a sash tunnel and lock the desktop?
Does anyone have a simple cheap or free solution?

Well the old VPN Client was the ONLY IPsec remote access VPN client that Cisco offered. So they wouldn't need to say "we recommend this one vs. that one" would they?
Any migration needs to take into account new features and potential issues with the new client software. So you would need to confirm your VPN head end type, version, licensing, etc. Decide whether you want to use IKEv2 or sSL transport. Decide how you want to deploy the client software. Decide whether you want to make any changes to the features deployed given the expanded range of capabilities offered by AnyConnect, etc.
Hope this helps. Please rate helpful posts.

Similar Messages

What is STB Remote Control code for the Magnavox 15MF400T/37 set?

Does anyone know or know where to find the correct remote control code for the 15MF400T/37 set?

If none of the codes worked, your only other option is to do a scan.
WHAT IF NONE OF THE CODES WORKED?
If none of the codes worked, try the following procedure. (As before, we will use the example of a TV. For other devices use the appropriate Device Key instead of the
TV
key in step 2 and 3.)
1. Turn on your TV.
2. Press and hold the TV key.
3. While holding down the TV key, press OK
4. Release both keys. The Device Keys will blink twice.
5. Press 9 - 2 - 2
6. Point the remote at the TV.
7. Press the play button
8. Press FF button . Every time you press the FF button the remote sends out a new power-off command to the TV. Keep pressing FF until the TV turns off.
9. When the TV turns off, you have found the right code. Press OK to store this code.
Note: There are over 300 TV and DVD codes. The most common codes are tried first, but you may still need to press FF over 300 times to find the right code. If you reach the end of the list of codes the entire remote will flash twice and return to normal operation. You can exit programming at any time by pressing EXIT
If you do this and it still doesnt work, then your tv and the verizon remote dont have a common code and it will not work with your tv.
====================================================================================
Error exists between keyboard and chair.

Cisco Secure Access Control Server for Windows 3.0

I have to rebuild a server using Cisco Secure Access Control Server for Windows 3.0 ... I cannot locate this software under "download software" in cisco.com ..
where can I download a copy for Cisco Secure Access Control Server for Windows 3.0 ?

Hi,
You can not download the ACS windows Solution engines softwares from the cisco.com > download pages as these s/w are not available there. You can only download patches and remote agent software.
In order to get any ACS software/ upgrade assistance you need to open up a TAC case.
Also, ACS 3.0 is not supported by Cisco anymore..getting support for this version or any 3.x is not possible.
HTH
Regards,
JK

What is the best voice control program for macbook pro

what is the best voice control program for macbook pro?
i have lost the use of my arms and need full voice control.
thank you.

Welcome to the Apple Support Communities
First, use speech recognition. It's installed on OS X, so you don't have to install a third-party app. See > http://support.apple.com/kb/PH11258?viewlocale=en_US

Remote Control settings for Markers

The user manual for Studio Pro 4 states that Remote Control settings for Markers will override all other settings while that part of the track or story plays.
This however, is not the case- In my project the track & story settings for Remote Control>Menu are actually overriding marker Remote Control>Menu settings, & I really need the marker functions to take precedence over other functions.
Any idea how I can make this happen?
Thanks!!
eric

As Jake said - I am not seeing this behaviour either.
If you clear all end jumps from chapter markers and place the markers into stories then you set the menu call for the story. This can be different to the track and depending on which you are playing the menu call for that item will take precedence.
Of course, if you really want to make it bullet proof then you could point the menu call to a script. Assuming that no matter which story you are in, or how you got to the marker in the track, the following script will always return you to a specific button on a menu for the marker that you have just played
mov GPRM0, SPRM7
Jump Menuname, [GPRM0]
SPRM7 is a system parameter that checks which marker has just played. The first line of the script loads the value of this into a memory slot called GPRM0. The second line operates a jump to your menu - I assume there is only one menu here - and using a conditional GPRM based button jump, the value of GPRM0 fills in the value of the button to go to. This saves writing out lines of code for each possible button.
If you have lots of menus then this script can be adapted very easily to cope with that, or you can set up other scripts to identify which menu you have come from so as you know which to go back to.
However, before any of this I would want to know why you are not getting the expected behaviour on our project - my guess is that there is going to be a menu call set into a chapter marker which is over-riding the track or story menu call. If you have end jumps on markers, or menu calls on markers, remove them.

Remote control (media) for Pavilion G6S?

Can you recommend for a remote control (media) for Pavilion G6S?

Hi
> I didn't found any driver for the A500 anyway, even for Vista...
It looks like the A500 is very new on the market and I believe the drivers (Vista) will be released in the next time
You will have to wait a little bit
I think that the Vista driver would be compatible with the Win 7.
I have installed Win 7 on my notebook and most of the vista drivers are working.

What is the best & cheap backup solution for a macpro laptop?

What is the best & cheap backup solution for a macpro laptop? easy & simple to use

Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components: 1. A Time Machine preferences panel as part of System Preferences; and, 2. A Time Machine application located in the Applications folder. It is used to manage backups and to restore backups. Time Machine requires a backup drive that is at least twice the capacity of the drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
Synk Pro
Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
Although you can buy a complete external drive system, you can also put one together if you are so inclined. It's relatively easy and only requires a Phillips head screwdriver (typically.) You can purchase hard drives separately. This gives you an opportunity to shop for the best prices on a hard drive of your choice. Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu. You can find reviews and benchmarks on many drives at Storage Review.
Enclosures for FireWire and USB are readily available. You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports. I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.) You can find enclosures at places such as;
Cool Drives
OWC
WiebeTech
Firewire Direct
California Drives
NewEgg
All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover. Usually the only tool required is a small or medium Phillips screwdriver.

Need to sign Lenovo in order to install our Remote Control app for our Customer - Help please!

Dear All,
Thank you for joining me into the Lenovo Community.
I am not certain if I have started the thread in the right place, if I have not, admins please help me transfer this thread where needed.
One of our Customers is going to purchase our Remote Control application, in order to access and remote control their Android Smartphones, from their Windows PCs (Windows Computers to access and remote control their Android phones). The Customer is using Lenovo as their smartphones (about 2000 of them).
However, our application needs to be signed by Lenovo in order to fully install and run on a Lenovo Android smartphone.
I do not have access to the Support department, nor to the Development department of Lenovo in China.
Is there a way that you would recommend I take, either by contacting Development directly, or Support, and where would that be? China or US?
Thank you in advance and I hope to hear from you soon.
kind regards,
Michael Chatzilias

Use the "auto search" feature of the remote to see get the code.
In the manual, it's under "WHAT IF NONE OF THE CODES WORKED"
Here's a summary:
program the TV, use code 922
Press Play
then Press Fast forward.
Keep pressing fast forward until your tv turns off (go slow, if you go to fast you can use rewind to go back a code).
when it turns off, the remote found the code, press OK to save it.

Remote Control Wanted for a B540

Having problems finding my remote control since I sent my machine back for repair, so I'm asking if anyone has one for sale ?

hi Buckie,
If you need the remote control to use with the TV Tuner, you can get one on this website.
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

What is the best free backup solution for Hyper-V R2/2012? CSV support is necessary

Hi,
I need so guidance, please.
I’m planning to deploy a free backup solution for my virtual environment and I need your advice. I have the following configuration:
Failover Cluster:
Two Dell Servers
OS: Windows 2012 STD
Each server has two AMD Opteron 4180 6C @ 2.6 GHZ
16 GB – RAM (supports 256GB)
QNAP NAS (CSV)
It’s hosting a DC, an Exchange 2010 and soon a SharePoint 2013 VM
Standalone Hyper-V:
Dell Server
OS: Windows 2008 R2 Datacenter
It has two Intel Xeon E5520 @ 2.2 GHZ
16 GB - RAM
It’s hosting 3 VMs
In my research I found these apps. All of them are limited in some way but they do the job:
Veeam Backup Free Edition v7
Altaro Hyper-V Backup
Unitrends Enterprise Backup
PHD Virtual Backup for Hyper-V
HV Backup from CodePlex
Windows Server Backup (WSB)
What is your experience with them? What would you recommend?
When it comes to money, which one is more affordable? (In case I want to buy the full version)
Thanks in advanced.

Hi,
I need so guidance, please.
I’m planning to deploy a free backup solution for my virtual environment and I need your advice. I have the following configuration:
Failover Cluster:
Two Dell Servers
OS: Windows 2012 STD
Each server has two AMD Opteron 4180 6C @ 2.6 GHZ
16 GB – RAM (supports 256GB)
QNAP NAS (CSV)
It’s hosting a DC, an Exchange 2010 and soon a SharePoint 2013 VM
Standalone Hyper-V:
Dell Server
OS: Windows 2008 R2 Datacenter
It has two Intel Xeon E5520 @ 2.2 GHZ
16 GB - RAM
It’s hosting 3 VMs
In my research I found these apps. All of them are limited in some way but they do the job:
Veeam Backup Free Edition v7
Altaro Hyper-V Backup
Unitrends Enterprise Backup
PHD Virtual Backup for Hyper-V
HV Backup from CodePlex
Windows Server Backup (WSB)
What is your experience with them? What would you recommend?
When it comes to money, which one is more affordable? (In case I want to buy the full version)
Thanks in advanced.
Any Altaro Hyper-V Backup User?

How to backup new learned remote-control data for the IR-remote APP???

Hello @ all,
does anybody know a way to backup the new learned remote control on XPERIA Z Tablet?
I found a database under:
"system/vendor/etc/sony-ir-remote/db"
But after I've saved new learned remote controls the date and the size of these DB's
are the same as before. Therefore the IR-remote control APP dosn't save the new data
in these files.
Furthermore there isn't a button in the remote-control APP to backup new learned remote controls.
And I can't choose the remote control APP in the backup function APP from the XPERIA Z Tablet
to save the data. Also the backup with the Sony PC Companion Software dosn't save the learned
remote controls. Who develops such a dross mobile software?
Sorry SONY, but you have the most unpalatable support I've lived to see!
The first SONY support center refered me to another support center.
The mobile support center does not answer to my questions per mail.
Then I call the mobile support center. The answers were shallow and standard.
The support engineer want to ask the development and call back.
However, I am still waiting for promised recall.

I am facing the same problem.
I have spend a few days to configure and train my Sony tablet to configure for all my remotes such as aircon and lighting. I did a backup using the Sony companion to my PC. When my tablet was faulty and serviced. But the backup did not recover the IR remote settings and codes which I programmed previously. I also tried your backup restore app but it also does not save the configuration.
It is VERY IMPORTANT for me to backup the settings.
Please provide the folders and path of where the IR REMOTE settings and personal configuration and codes trained were kept so that I could back them up. Are these path protected area that required rooted access?
Hope that Sony could update the app to include backup of new trained codes and settings and in the meantime to provide a procedure of how to backup the setting and trained IR codes with or without rooting the device.

Remote control Tool for non-IT staff

Hi
We currently run ZENworks for Desktops v7 and have a requirement to
offer our financial systems team the ability to remote control users'
workstation without the need to use Console 1. All workstations are
currently Windows XP SP2 or SP3.
1. Are there any 3rd party/Cool tools that can be used to offer remote
control instead of using Console 1?
2. Do these tools require additional roles/rights?
Thank you.

You can use our DSRAZOR for eDirectory/NDS and NetWare product for this.
See the applets called "ZEN Remote Control / Remote View by User" and "ZEN
Remote Control / Remote View by Workstation" in the HelpDesk Examples
section of the DSRAZOR Console. The applets can be customized to your
needs - such as limiting which containers and/or which workstations are
shown, and allowing only remote control or only remote view (instead of
both). After any necessary modifications are made (we can show you how or
make the changes for you), save the applet as an EXE to distribute to the
people who will use it. Having the applet as an EXE means they will not
need ConsoleOne and they will not need the full DSRAZOR product either.
The example applet in the DSRAZOR Console is based on the user's own
privileges. If you do not want to grant these users their own privileges
for remote control / remote view, the applet can be modified to use our
optional Zero Privilege Helpdesk NLM. You would need one NetWare server to
run the Zero Privilege Helpdesk NLM. When you load the NLM you will specify
the name of a group (such as financial systems group). Then only the
members of that group will be able to successfully use the applet, which
they will have as a stand-alone EXE.
An evaluation of DSRAZOR is available from:
http://www.visualclick.com/?source=NVsupZen7r
"Donald Sparko" <[email protected]> wrote in message
news:eaK4m.1481$[email protected]..
> Hi
>
> We currently run ZENworks for Desktops v7 and have a requirement to
> offer our financial systems team the ability to remote control users'
> workstation without the need to use Console 1. All workstations are
> currently Windows XP SP2 or SP3.
>
> 1. Are there any 3rd party/Cool tools that can be used to offer remote
> control instead of using Console 1?
>
> 2. Do these tools require additional roles/rights?
>
> Thank you.
>
> --
>

Tab Control Solution for my project

I am implementing the program acquisition and signal processing. The program has two parts are Aquisition and Analysis. I want to integrate into a program should use the "tab control". Each program section have some special processing so I do not know how the tab control to not conflict.
+ Aquisition Tab will perform receiving signals continuously from the computer through the COM port, recording the file by "write the measurement file" .tdms
+ Analysis performs the "read measurement file .tdms", which have been recorded to display and several other process.
I expect people to help to have appropriate solution for the tab control for my project.
Attachments:
EMGbk_UI_standard.vi ‏171 KB
2603_sEMG_10.zip ‏342 KB

Hi ducta,
Ofcourse you can integrate the tab control in your project.But please clarify me on this question.
Do you want to use the tab control in a toggling fashion?i.e. initially keep the tab in acquisition and then change the tab in analysis and then again change it to acquisition.If you are using this way then only it makes sense as the acquisition and analysis will hand in hand according to the tab control.
Regards,
SrikrishnaNF

Desktop remote control software for iPhones?

Is there any software for desktop pc's to remote control an iPhone? I see numerous apps to control things from the iPhone, but I need one for the other way around.
We are looking to possibly deploy our own in-house app, but need to remote control the devices for troubleshooting/presentation purposes.
Any information is appreciated!

Not as of yet. The only thing that is remotely (no pun intended) close is remote file access, like apps such as Air Sharing.

Remote control code for Sharp LC-32DV200E

Hi there!
i have just tried all codes for Sharp from BT Vision help page and it does not work. My telly is less than a year old, so it can't be an issue of old telly. Does anyone know any other codes (apart from those on |BT Vision list in help)? I will greatly appreciate some help here. Thanks in advance.

Yankee2 wrote:
Bought a new rev'8' sky remote control as the old one has hard-to-push buttons. I followed the instructions for programming the remote to my tv (LG 32LC2DB) but the codes supplied do not work on new remote. Checked code on 'old' remote (0206) and tried that - no luck. Red light does not blink when holding down 'select' and 'red button'. Switched everything off, removed batteries, turned back on and still nothing. New remote does work all Sky controls but not tv. Any suggestions would be appreciated. Try these codes as well 1293 1206.Then try the procedue below.Press TV (one flash)Hold select and red till remote flashes twice999SelectTVSelect and red till two flashesEnter codeSelect

What is a Secure remote Control solution for ipadv3 to osx 10.8?

Similar Messages

Maybe you are looking for