What is a sub-object ?

Hi,
I'm not consultant abap, but I have to create a sub-object to log some order details that will be used subsequently for repeat order checks.
Can u tell me what is it ? and How create ...
Best Regards,
Lupita.

A subordinate object.
A parent-child relationship.... the child is subordinate to the parent.

Similar Messages

Main Objects and sub-objects

Hi All,
Please tell me what is the meaning of 'Main Objects' and 'Sub-objects' in CRM.
Thanks.

Dear Nishikant,
Kindly follow the below blog which is exporting your crystal report to HTML4.0 version.
If it successfully imported, then the problem may reside in the mapping of values to the SWF file.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417200)ID0191682050DB01264035234114071801End?blog=/pub/wlg/15995
Hope this will help you.
Regards
Gokul.N

Creation of object with sub-objects in ADF Faces

I am trying to create an object that has associated sub-objects (header/detail) using ADF Faces. The user enters the header information in an ADF Form, then he creates detail data. Example: If the object is a PO, user creates the PO header info and, in an ADF table, he creates the PO lines.
The problem is I am not able to figure how to bind the ADF table to the object that is being created. In a normal master-detail form, you drag the associated list from the Data Control palette and JDev automatically creates an accessor iterator that "feeds off" the master iterator. But, in this case, the associated list does not appear in the data control palette. Nor am I certain that is the right thing to do, anyway.
Help! This seems like it would be a common pattern.
Ara

Sorry. Here is some more information:
1. The project is for tracking duplication jobs requests.
2. Data Model--DocumentTicket and JobDocument objects are EJB 3.0 JPA objects. DocumentTicket has a getter (getJobDocuments) to retrieve a List<JobDocument> of related job documents. JobTicketManager is the session bean that encapsulates most business methods.
3. I am using ADF Faces bindings to "publish" the data model to the GUI.
4. In the GUI, I dragged/dropped the DocumentTicket constructor from the data control palette to create the document ticket. This created the appropriate method action bindings, as well as the DocumentTicketIter iterator to iterate over the constructor result.
5. Of course, the user also needs to specify the related job documents. In the GUI, I would like to have an ADF table that displays the current job documents, and a button labeled "Add Document" that is wired to a pop-up dialog. The idea is that the user clicks on the "Add Document" button, enters the information about the new JobDocument object. The object is then created and the table is updated with a new row. The table is also used to manipulate the list of job documents (chiefly, it allows the user to change their listed order).
Step 5 is where I am having trouble. I can see how to create the pop-up dialog, how to wire it to the JobDocument constructor, how to update the data model. The problem is: I do not know to which object I should wire the JobDocument table. Logically, I should be able to wire it to the jobDocumentList property. However, that is not displayed in the data control palette under the constructor results (it is displayed elsewhere; for example, under the result of the findAllDocumentTickets method).
I suppose I could create a separate finder method in the session bean, but then how do I connect it to the object being constructed (i.e., to the JobDocumentIter iterator)?
Either I am missing something here or I am hitting some limitation of the ADF binding framework.
Ara

What kind of view object should I create for this data model?

I have an entity that has several dates. The dates are stored in a table separate from the entity, each entity date has a date type (open, close, interview, etc) associated with it. The DBAs idea (who else of course!) was to have the flexibility to add new types of dates for entities when needed.
So you have tables like this -
Table: EntityTable
Columns: EntityId, EntityName
Table: DatesTable
Columns: EntityId, Date, DateTypeCd
I need to display an editable ADF form where I can update the entity and the entity dates
The ADF form would contain something like this -------
Entity Name: []
Opening Date: []
Closing Date: []
Interview Date: []
What kind of view object would I need to create to achieve this?

That would be a master-detail relation 1-* between 'entity' and 'entity dates'. If your dba has set up the foreign key association in the db and you use the wizard to create the business objects, jdev pick up the relation and create the correct master detail relation in the vo layer for you.
By the way naming a table 'entity' is not a good idea when working with ADFbc. We all talk about entities when we relate to a business object (in this case a row of a table or entity object or EO). So it's hard to distinguish the two, your specific table 'entiyt' and the common term entity or EO which can be a row of any table.
Timo

How can we determine exactly what server an RMI object is bound to?

We have RMI objects that bind to a server in a cluster. How can we determine for
monitoring purposes what server a RMI object is currently bound to /executing
on?
We have tried the most of the Mbeans but can't find one that returns runtime info
for startup classes or RMI objects.
We have a new monitoring requirement we are trying to satisfy.

try get the value of PKEY_OfflineAvailability using shell property system APIs (SHGetPropertyStoreFromParsingName or ShellFolderItem.ExtendedProperty)
Visual C++ MVP

Error message BL011: For object FIAA, no sub-object 100 is maintained

Hi,
When I execute asset revaluation transaction (J1AI), the system shows the following error message: For object FIAA, no sub-object 100 is maintained.
I have searched this error in OSS notes but I haven't found anything about it.
Could you help me? Thanks in advance. Regards.

Probably, the subobject 100 wasn´t created in transaction SLG0, object FIAA. By error message BL011 you´ve
to create this subobject.
Please, run the transaction SLGO, FIAA -> subobject -> new entries -> "100 Post revaluation".

What is user-defined object?

hi,
can someone pls explain to me what does user-defined object means???
my final yr proj is abt that and i really have no idea abt what is user-defined object...
thank u...
(duke point awarded of coz)

my final yr proj is abt that and i really have no
e no idea abt what is user-defined object...
thank u...Well u'd better get started here (http://java.sun.com/docs/books/tutorial/getStarted/index.html) then, dont u ?
ram.

What are all the objects can be imported and exported...

Hi all,
what are all the objects can be imported ..
and what are all objects exported....in XI..
and what is context objects and logical routing..
Cheers,
Raghavesh

Hi,
Your question 1 is not very clear. Are you taking about Export and Import under TOOLS --> EXPORT / IMPORT? If yes, all objects created in the IR and ID can be exported and improted. They are used for moving your objects from one environement to another .TPZ files.
Individual Objects that can be improted in the IR are those that come under
1. External Definitions --> XSD, WSDL, DTD which acts
as the message types.
2. Idocs and RFC's.
3. Imported Archives -->External Mapping progrars ( Java and XSLT ) , external .jar files etc.
Context objects is nothing but to put in simple words an XPATH. At times XPATH can become too long and complex and to avoid typing them at different places, you create CONTEXT Objects for these path and then use them.
Logical Routing refers to Conditional Receievr / Interface Determination where on the basis on some conditoon your target Recievr / Interface is determined.
Regards,
Bhavesh

What is the ODS object settings?

What is the ODS object settings?

Use
When creating and changing an ODS object, you can make the following settings:
BEx Reporting
With the BEx Reporting indicator, you determine whether the ODS object is immediately available for BEx queries. If the indicator is not set, no SIDs are generated for the new characteristics when the data in the ODS object is activated. This optimizes the performance of the activation process, but the ODS object is not available as an InfoProvider for queries. Turn the indicator off for all ODS objects that are only being used for further processing of data in other data targets or that are being used in InfoSets.
ODS Object Type
Select the ODS object type. You can choose between standard and transactional, whereby standard is pre-installed and transactional is only meant for special cases. You can switch the type as long as there is still no data in the ODS object.
See also Transactional ODS Objects.
Unique Data Records
With the Unique Data Records indicator, you determine whether only unique data records are to be updated to the ODS object. This means that you cannot load a data record into the ODS object the key combination for which already exists in the system u2013 otherwise a termination occurs. Only use this setting when you are sure that only unique data records are to be loaded into the ODS object (for example, single documents). A typical application of this is in the loading of mass data. It improves the load performance.
Note
You can also deselect this indicator again (even if data has already been loaded into the ODS object). This can be necessary if you want to re-post deleted data records using a repair request (see: Tab Page: Updating). In this case, you need to deselect the Unique Data Records indicator before posting the repair request, following which you can then reset the Unique Data Records indicator once more. The regeneration of metadata of the Export DataSource, which takes place when the ODS object is reactivated, has no effect on the existing data mart delta method.
Check Table for the InfoObject
Here the name of the InfoObject is displayed for which the ODS object is also the check table, if necessary. You can specify this when creating an InfoObject. See also Tab Page: Master Data/Texts in the InfoObject maintenance.
Automatically Setting Quality Status to OK
With this indicator, you can determine that the system automatically sets the quality status to OK after loading data into the ODS object. You should turn on this function. You should only deselect this indicator if you want to check the data after it has been loaded.
Automatically Activating the ODS Object Data
With this indicator, you can establish that the data that has Quality Status OK be transferred from the activation queue into the active data table, and that the change log is updated. Activation is carried out by a new job that is started after loading into an ODS object is complete. If the activation process terminates, there can be no automatic update.
Automatically Updating Data from the ODS Object
With this indicator, you can establish that the ODS object data be automatically updated. Once it has been activated, the data is updated in the data targets. An init. update is carried out automatically with the first update. If the activation process terminates, there can be no automatic update. The update is carried out by a new job that is started once activation is complete.
Note
Only activate automatic activation and updating if you can ensure that these processes do not overlap.
If you use process chains to guarantee serial processing of the process, these settings are not supported for the object (with the exception of setting the quality status). Then you have to include the automatic processes as process types in the process chain.
Also refer to the example for Including ODS Objects in Process Chains.

When we create a table maintenance generator what is the program object

When we create a table maintenance generator what is the program object
& What is the database object is being created?

check links
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=use%20of%20table%20maintenance%20generator&cat=sdn_all
http://www.sapdevelopment.co.uk/tips/tips_tabmaint_tcode.htm
http://www.sap-img.com/abap/create-a-table-maintance-program-for-a-z-table.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
Rewards if useful.....................
Minal

What is the program object is being created when we activate smartform?

What is the program object is being created when we activate smartform?

hi,
while activate the smart form, a function module is being created.
by using this function module we can pass the business data to the form.
in print program we can simply call the function module which has been created by smart form while it activate and pass required parameters to it.
for more information follow this link.
http://sap.niraj.tripod.com/id67.html
regards,
Ashok Reddy

What kind of view object would I need to create to achieve this ADF form?

I have an entity that has several dates. The dates are stored in a table separate from the entity, each entity date has a date type (open, close, interview, etc) associated with it. The DBAs idea (who else of course!) was to have the flexibility to add new types of dates for entities when needed.
So you have tables like this -
Table: EntityTable
Columns: EntityId, EntityName
Table: DatesTable
Columns: EntityId, Date, DateTypeCd
I need to display an editable ADF form where I can update the entity and the entity dates
The ADF form would contain something like this
Entity Name: []
Opening Date: []
Closing Date: []
Interview Date: []
What kind of view object would I need to create to achieve this?

That would be a master-detail relation 1-* between 'entity' and 'entity dates'. If your dba has set up the foreign key association in the db and you use the wizard to create the business objects, jdev pick up the relation and create the correct master detail relation in the vo layer for you.
By the way naming a table 'entity' is not a good idea when working with ADFbc. We all talk about entities when we relate to a business object (in this case a row of a table or entity object or EO). So it's hard to distinguish the two, your specific table 'entiyt' and the common term entity or EO which can be a row of any table.
Timo

What is the SNRO Object To maintain Course Groups

What is the SNRO Object To maintain Course Groups. Or is there a transaction?

All objects will be maintained at TNRO table, please check.
Thanks
Satyasuresh

What is match code object?

hello all
what is match code object? how to use the match code objects in our program?

Hi ,
Match Code object is used to attach an F4 help to any field.
whenever you cant find any F4 help for any field you just attach an Match Code Object to the Parameter / Select options.
Match COde objects are like Search Help created in SE11. if you cant find any standard Match Code object then you can create a Search Help in SE11 and attach it to the field , then you will have the F4 Help.
Hope this is helpful to you.
Regards,
Vivek Shah

Creating sub-object

Hello,
new to java I've noticed that the only chance to instantiaced sub-object is this (strange to me since I've never seen a such thing in c++):
public class MYObject {
public class Dog {
//main
MYObject o = new MYObject();
MYObject.Dog dog = o.new Dog;the 'o.new' is strange to me; do you confirm this way either there are some others?
regards.

mickey0 wrote:
maybe your right; it doens't make sense to put it inside a class; but Dog isnt' a good example of it. I'll explain by words: I have a object made of 'components' (a car with wheels, doors, seats make more sense). So to me make sense say:
public class Car {
public class Wheel{
}now: I only instantiated Wheels not because I really need it but only to work on it (add properties) and in the end I will assign the Wheels to the car:
Car c = new Car();
Car.Wheels tempWheel = c.new WHeels();
//do many stuff on tempWheel
wheels.add (tempWheel);maybe (as you said) it makes more sense something like:
public class Wheel {
public class Car {
public List<Wheel> wheels = new List<Wheels>();
//main
Car c = new Car();
Wheel tempWheel = new Wheel();
//do stuff on tempWheel
c.add (tempWheel);I do only put the Wheels inside the Car just because I think that conceptually they belong to car.Which they do. But not necessarily exclusively. The next question is why were you trying to instantiate Wheel from outside of Car?

What is a sub-object ?

Similar Messages

Maybe you are looking for