What is actually happening

OK, I borrowed my brothers Canon ZR60. I'm getting a 4 pin to 6 pin cable from Amazon. Now, when I figure this all out and plug it in, what is actually going to happen? Is the computer actually going to read the tape while it spins (when I'm downloading)? Will I be able to designate different parts (clips) for download (like a digital camera) or is it going to read everything and not stop until it runs out of information? The whole miniDV tape thing confuses me.

Once you plug your camcorder into the computer, you will be able to control the playback within iMovie. While playing the tape, you'll see what's playing inside the iMovie preview window. You can click the Import button when you get to the spot where you want to capture, then click it again to stop capturing. The tape will play on until you stop it.
There's also an iMovie preference setting that will detect when you've stopped the camcorder and restarted it later during a recording session. iMovie will then separate at those points into individual clips.
Once you start to play around with it, you'll see its fairly easy to work with.

Similar Messages

I have 100 songs on i pod touch. But when i connect it to itunes it only showed 44 songs. What is actually happening and how to fix the problem so that all music in my iphone can be seen in my itunes

I have 100 songs on i pod touch. But when i connect it to itunes it only showed 44 songs. What is actually happening and how to fix the problem so that all music in my iphone can be seen in my itune

If they are iTunes purchased music then go to Settings>iTunes and App Store and turn off Show All.
Next
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

What is actually happenning when we are importing a class of some other pac

Sirs,
I have a doubt which is very basic to java,
I want to import a class say "HashMap" to my class.
If i put import "java.util.HashMap" or "import java.util.*;"
Which will be better ?
If i put "import java.util.*; " will it affect the performance?
What is actually happenning when we are importing a class of some other package to our class
Your help solicited,
Sudheesh K S

Many of your questions of this nature can be quickly answered by a search of prior posts to the forums, like this:
http://forum.java.sun.com/thread.jspa?forumID=54&threadID=631979
And why do you tend to post boldened text? It's harder to read.

PPro, AME, and CUDA: What's Actually Happening Here?

I bit the bullet and picked up a new Quadro 4K for my Mac Pro. The videos I'll be making with Premiere Pro will include a scaled-down multi-cam PiP, which the CUDA processors can clearly help with. However, I'm a bit puzzled by something: what's actually going on here behind the scenes, so-to-speak? I'm coming at this question from a software/computer geek perspective, not from a video editing one. I'm sincerely interested in what's going on between PPro, AME, and the nVidia card.
First off, I asked this question back in July. At the end of the thread, Todd says that if I queue up the export with AME, then the rendering would be done by the CPU. Fair enough, but something else is going on with AME and the nVidia card. If I enable the GPU in PPro and then export it through AME, the AME log looks like this:
- Source File: /Volumes/Users/jvp/Library/Caches/TemporaryItems/Multi-Cam Test.prproj
- Output File: /Volumes/Users/jvp/Desktop/multi-cam_1.mp4
- Preset Used: Custom
- Video: NTSC, 1920x1080, 29.97 fps, De-interlaced
- Audio: AAC, 160 kbps, 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 6.00, Max 10.00 Mbps
- The source was deinterlaced
- Encoding Time: 00:20:09
If, however, I disable the GPU in PPro and export the same sequence through AME, the log reads:
- Output File: /Volumes/Users/jvp/Desktop/multi-cam-no-cuda.mp4
- Preset Used: Custom
- Video: NTSC, 1920x1080, 29.97 fps, De-interlaced
- Audio: AAC, 160 kbps, 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 6.00, Max 10.00 Mbps
- The source was deinterlaced
- Encoding Time: 01:18:32
A noteworthy difference in time. Further, during the first export in AME, the GPU is definitely being used at about 33% or so. So clearly it's doing something. What I'm curious to know is: what? Is it actually doing the rendering of the PiP while AME is exporting the video? Or... ?
jas

Harm Millaard wrote:
Apart from other effects, the PIP means scaling and scaling is GPU assisted. That could well be a serious determinant for the differences in encoding times.
Right Harm, I'm certain that the PiP scaling is what's causing the immense difference in exporting (encoding) times. But what I'm curious to know is: why is it mattering when I punt to AME? To me, it implies that either:
PPro is continuing to do some of the work during the export, in the background, even though AME is open and working, or
AME is actually making use of the video card.
That's why I'm curious about this and wondering what's going on from a technical perspective.
jas

What is actually happening with getMoreTLAMemory() and native_blocked

I have an application that seems to periodically lock up and become unresponsive, which we end up killing and restarting. A thread-dump consistently reveals the following scenario:
1) There are many threads (18 or so) with a thread-dump like:
"a0-141" prio=5 id=0x7000 pid=5206 active, native_blocked
at jrockit/vm/MemSystem.getMoreTLAMemory(Native Method)@0xb6783d10
2) One of these threads is holding a lock that many (many!) other threads is trying to acquire. This lock is released quickly in the normal running of things, but obviously the lock-holder is blocked in some sort of memory-allocation activity.
We are currently running jrockit-j2sdk1.4.2_08, with -Xmx512m -Xms192m. We intend to run the app under jrockit-R26.0.0-jdk1.5.0_04 on the next restart.
Any hints on the nature of this getMoreTLAMemory() call, and its native_blocked state? Is the JVM in some sort of GC activity that happens to be taking a long time?
=Matt

Hi,
It seems that your system is Throwing a lot of OutOfMemoryError, which you
are catching in your application. If you catch a such exception, your
application should never ignore it (catch it silently), because you can not
recover from a such exception.So you should terminate your application with
a proper message.
If you know that 512m is enough for your application, then it means that you
have memory leak in your app, and for that I suggest you use Memleak to
track it down, otherwise I suggest you increase the heap to accomodate your
application needs.
Regards,
Tiberiu Covaci
JRockit Team
<Biswo jit> wrote in message news:[email protected]...
Hi
We are also getting a similar sort of problem "Throwing OutOfMemory:
nativeGetNewTLA". Currently we are running
jrockit-R27.1.0-jre1.5.0_08-linux-ia32 with -Xmx512m -Xms512m.
We are getting this log after we used -Xverbose:memory
[INFO ][memory ] 1551.301-1551.586: GC 524288K->524288K (524288K), 285.181
ms
[INFO ][memory ] 1551.601-1552.419: GC 524288K->524288K (524288K), 818.366
ms
[INFO ][memory ] Throwing OutOfMemory: nativeGetNewTLA
[INFO ][memory ] Throwing OutOfMemory: nativeGetNewTLA
[INFO ][memory ] 1552.477-1552.716: GC 524288K->524288K (524288K), 239.779
ms
[INFO ][memory ] 1552.723-1552.958: GC 524288K->524288K (524288K), 235.828
ms
[INFO ][memory ] 1553.016-1553.789: GC 524288K->479738K (524288K), 772.022
ms
[INFO ][memory ] 1553.849-1554.075: GC 524288K->524288K (524288K), 226.385
ms
[INFO ][memory ] 1554.081-1554.309: GC 524288K->524288K (524288K), 228.326
ms
[INFO ][memory ] 1554.377-1555.323: GC 524288K->353358K (524288K), 946.352
ms
[INFO ][memory ] Throwing OutOfMemory: nativeGetNewTLA
[INFO ][memory ] 1555.381-1555.611: GC 524288K->524288K (524288K), 230.352
ms
[INFO ][memory ] 1555.618-1555.937: GC 524288K->524288K (524288K), 319.087
ms
[INFO ][memory ] 1555.944-1556.773: GC 524288K->354232K (524288K), 828.970
ms
[INFO ][memory ] 1556.833-1557.167: GC 524288K->524288K (524288K), 334.113
ms
[INFO ][memory ] 1557.173-1557.408: GC 524288K->524288K (524288K), 234.490
ms
[INFO ][memory ] 1557.415-1558.300: GC 524288K->524288K (524288K), 884.986
ms
[INFO ][memory ] 1558.362-1558.598: GC 524288K->524288K (524288K), 235.418
ms
[INFO ][memory ] 1558.657-1558.957: GC 524288K->524288K (524288K), 299.905
ms
[INFO ][memory ] 1559.013-1559.908: GC 524288K->524288K (524288K), 895.066
ms
[INFO ][memory ] Throwing OutOfMemory: nativeGetNewTLA
[INFO ][memory ] Throwing OutOfMemory: nativeGetNewTLA
[INFO ][memory ] Throwing OutOfMemory: nativeGetNewTLA
[INFO ][memory ] 1559.970-1560.222: GC 524288K->524288K (524288K), 252.018
ms
[INFO ][memory ] 1560.228-1560.462: GC 524288K->524288K (524288K), 234.402
ms
[INFO ][memory ] 1560.470-1561.293: GC 524288K->524288K (524288K), 822.836
ms
[INFO ][memory ] 1561.302-1561.532: GC 524288K->524288K (524288K), 230.341
ms
[INFO ][memory ] 1561.538-1561.772: GC 524288K->524288K (524288K), 233.728
ms
[INFO ][memory ] 1561.785-1562.630: GC 524288K->461707K (524288K), 844.261
ms
[INFO ][memory ] 1562.689-1562.999: GC 524288K->524288K (524288K), 309.380
ms
[INFO ][memory ] 1563.007-1563.370: GC 524288K->524288K (524288K), 362.903
ms
[INFO ][memory ] 1563.377-1564.171: GC 524288K->524288K (524288K), 793.895
ms
[INFO ][memory ] Throwing OutOfMemory: nativeGetNewTLA
[INFO ][memory ] 1564.189-1564.425: GC 524288K->524288K (524288K), 236.357
ms
Any help will be highly appreciated.

What actually happens @Completed filling free space info for database

Hello,
i see some strange thing with my 15.7 Ase server
Earlier for a very big db of around 1TB the recovery time would be around 15Mins( i mean for the 1TB db to come online).
Now its taking only seconds to come up.
so wanted to check what actually happens in this stage.
Started filling free space info for database 'xxx'
Completed filling free space info for database 'xxx'
The difference is that we have created new server and bcpd the data into it.
Please can someone explain.
Thanks

ASE keeps counters in memory of the amount of free space available on devices and segments. When ASE is shutdown cleanly (aka "politely"), these values are flushed to disk and used to initialize the in-memory counters on reboot. If ASE is shutdown abruptly, the values have to be recalculated, a process which involves either reading every OAM page in the database or every Allocation page.

The battery for my Macbook Pro 13 "has only 121 cycles and is not charging anymore, my Mac is telling me that it is necessary to exchange it. You have any tips for me to find out what might be happening with my battery?

The battery for my Macbook Pro 13 "has only 121 cycles and is not charging anymore, my Mac is telling me that it is necessary to exchange it. You have any tips for me to find out what might be happening with my battery?

Guys, i am actually trying using a solution provided by the article shared by dominic23,
It says "Another option is to get an ionizer to help the atmosphere in the workplace be more conductive and pull charges away from contact surfaces, including yourself."
So in my home, we have such device that could clean the air using ion, and i am using it in my room...
Result: BANG!!! The electric shock on my macbook has gone!! I don't really care about physics but somehow it works! You guys should give it a try.
Thanks again dominic23

What has to happen to get elements 10 to run in OSX 10.8?

What has to happen to get elements 10 to run in OSX 10.8?

can run editor and premiere but not photoshop.
Which editor? How are you trying to open elements? The actual editor or organizer, the welcome screen, which?

I just purchased Audition CC as a single app purchase for $19.19/month. I already have Creative Cloud installed. The program is not downloading - I clisk the "downlaod" button, the page says the program is downloading, but nothing is actually happening.

I just purchased Audition CC as a single app purchase for $19.19/month. I already have Creative Cloud installed. The program is not downloading - I clisk the "downlaod" button, the page says the program is downloading, but nothing is actually happening. What is going on?

Nobody can tell you anything without proper system info or other technical details.
Mylenium

What may be happening with my macbook pro 17''?

what may be happening with my macbook pro 17''? I made a few months ago upgtrade 4GB of memory to 16gb, everything was going well until the graphics began to dance and fails, until it gave bluescreen ... never seen it in a mac. Serial Number C0*******F92
Graphics card Intel HD Graphics 3000 512 MB? Was never 512mb graphic, do not know what may be going on .... please help.
<Personal Information Edited by Host>

The graphics memory increases to a max of 512 when you upgrade the RAM. The RAM is actually the most likely culprit, since it's been recently changed. Put the original RAM back in and see if your problem goes away.

Hi, i can't hear any sounds from my pad when i'm recording video what seems to happen? but it has sounds in songs from downloaded files.i just can't record sounds..

hi, i can't hear any sounds from my pad when i'm recording video what seems to happen? but it has sounds in songs from downloaded files.i just can't record sounds..

Hey ErikSimon, I kept troubleshooting my problem last night and when I loaded my samples an alternate way, actually the longer way, it worked. I think I have gremlins in the system or something, but I got it working again. I was having the issue when I tried loading the samples via these instructions that were mentioned in SFLogicninja's Youtube video @ 3:07
http://www.youtube.com/user/SFLogicNinja#p/u/8/7YjgKLZ2jpY
They are good instructions, but the Logic gods weren't smiling on me last night. Really weird and frustrating at the same time. Thanks anyways.

What does it happen with worng bit version?

Hello guys,
Is it possible a bug?
If i have been downloaded get Flash Player than i have been checked.
The installation Flash Player 64 Bit was duing after completed installation But same distirbutable Flash Application like Zinc Studio crashes becasue Flash Player installs worng bit version on directories:
In C:\Windows\System32\Macromed\Flash\
Flash64_.......ocx
NP64......dll
See at picture I don't change it... Flash Player Installer got worng Bit version
and in C:\Windows\SysWOW64\Macromed\Flash\
Flash32_.....ocx
NP32.......dll
See picture
What does it happen?? Why does installation get fails worng 32- and 64-Bit Version
I have been tired for sloved problem. Flash Player won't install currect Bit version in System32 and SysWOW64 ???
I haven't been installed worng. But same browser like Chrome or IExplore got crazy installation.
How do i reslove currect Bit version of Flash Player 32 for System32\Macromed\Flash and Flash Player 64 for SysWOW64\Macromed\Flash
Thanks for bug report
// Edit: Than it happens with Zinc Studio kills and exits now
I have been openned Zinc Application - I would like building nice Flash Application like Adobe Air 3.x
I get Project > Build project....
Zinc Studio will compile and got worng Flash Player 64 Bit from C:\Windows\System32\Macromed\Flash
Than it happens with Zinc Studio because Flash Player 64 Bit doesn't support yet.
But Flash Player Installer was getting worng installing on directory System32 ( 32 Bit ) That is crazy by Adobe Installer Please improve that Adobe Installer!
PS: Sorry my Operating System is German Language , Windows 7 Professional 64 Bit, Visual-Theme Android.
Thanks for answers

You actually have to blame Microsoft for this; on 64-bit systems:
32-bit stuff is installed in the syswow64 folder
64-bit stuff is installed in the system32 folder
I haven't read all in your long post, but if you try to run Flash content in a 32-bit browser and a 64-bit browser, you will see that everything works fine. Check http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html 1. & 2.
Some additional reading: http://en.wikipedia.org/wiki/WoW64

My Airport Time Capsule only works when I turn off and turn on, but I think this may end up with the unit. What can this happening and how to solve?

Time Capsule Airport
Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.

This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
In the airport utility bring up your Time Capsule.
Simply post the screenshots here.
So here is mine.
Click on the Edit button and give us the Internet and Wireless and Network tab..
eg.
Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
This is wifi in your computer.
The following are important..
DO not use long names with spaces and non-alphanumeric names.
Use short names, no spaces and pure alphanumeric.
eg TC name. TCgen5
Wireless name TCwifi
Use WPA2 Personal security with 10-20 character pure alphanumeric password.
read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
OS X Mavericks: Time Machine problems
Mount the TC manually in finder.
AFP://TCgen5.local
When asked for the password .. that is the disk access password and save it in the keychain.
Reset Time Machine
See A4 here. http://pondini.org/TM/Troubleshooting.html

How do I delete my old iPhone backup since I can not back up my new phone. Will I lose any pictures? Can you ever see what is actually on the cloud? Last, how do I delete the old iPhone back up. Thanks, been trying to do this for a long time.

I want to delete my old iPhone backup since I can not back up my new phone. Will I lose any pictures? Can you ever see what is actually on the cloud? Last, how do I delete the old iPhone back up. Thanks, been trying to do this for a long time.

Deleting the backup only permanently deletes the backup from iCloud. It doesn't do anything to the data currently in your account or on your devices. To delete it, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of the device that you want to delete the backup for, then tap Delete Backup.
You can't see anything in an iCloud backup, if that's want you're asking. You can only restore it to your device. You can, of course, see your other iCloud data.

Is there a way to tell what is actually being passed to DB from PreparedSta

Is there a way to tell what is actually being passed to DB from PreparedStatement? What I mean by that is that I have a PreparedStatement that is a simple
prepstmt = connection.prepareStatement("Insert into table (col1, col2, col3, .... colx) values (?,?,?....?)");
(there are x ?s)
I precompile this, and later, when there is a connection I call set all the variables
prepstmt.setInt(1, someint); prepstmt.setString(2, "\\'" + somestring + "\\'"); etc... prepstmt.executeUpdate();
I get back an exception thrown by Oracle complaining that one of my values is too large for the column (but doesn't say what column/value).
So I made a string that contains what ought to be the same query
String debug = "Insert into table (col1, col2, col3, .... colx) values (someint,'somestring',etc....someotherint)"; System.out.println(debug);
I give the printed out line directly to Oracle through SQLScratchpad and it works just fine in there and I can confirm the row has been inserted. Nothing is too big.
Is there a way to look at what the PreparedStatement actually has as values in there? I found I could look at the original statement (the one with the ?s) if I expand the prepstmt object in the debugger's (Eclipse) view, but nothing to show me where the values were filled in.
Thanks for any help you can give me.

Hrm, I'm suspecting that perhaps it has to do something with setting CHAR fields. Some of the fields in this table are CHAR but I don't see a call in my PreparedStatement that can set a char, only a String, so that's what I've been using, but it may be that that's not the right thing to do. I'm running Java 1.5.10, and looking through the API there doesn't seem to be anything specifically for char.

What is actually happening

Similar Messages

Maybe you are looking for