What is aging bucket and charge backs in receivables?
Hi
Iam new to oracle apps.
what is aging bucket and charge backs in receivables?
help me to learn basic terms of receivables?
Chargebacks
http://download.oracle.com/docs/cd/A60725_05/html/comnls/us/ar/teches12.htm
Aging Buckets
http://download.oracle.com/docs/cd/A60725_05/html/comnls/us/ar/system08.htm
Regards,
Srini
Similar Messages
-
Rev Recognition and Charge Backs From SD and FICO Prospective
Hello Guru's,
Will anyone mail the Building Block link to make config settings for Revenue Recognition and Charge Backs from SD and FICO Prospective, that will be of great help.
Full points for the link / docRevenue recognition settings are explained in note 777996.
-
Hi gurus,
I am creating an A/R aging queries to age open items in 30days buckets( 0-30days, 31-60days,61-90 days and 91days+).My logic for each buckets is below ..
eg -- 31-60days bucket (Key fig)- Item status- Open
Posting date - <= posting date(Variable)
Net due date - btw -31 to -60 days, using offsets
on the key due date variable
(2nd Key fig)- Posting date- <= Posting date(variable)
Net due date - btw -31 to -60 days, using offsets
on the key due date variable
Clearing date-- > Clearing date
Then for the 31-60 days bucket, I now add both key figures together.
The logic is working fine but I just found out that there are a few plants that the buckets are not aging the data correctly like it is in R/3 because some of the customers make partial payment and in R/3 they are moved from an aging bucket to a current one after the partial payment has been made,but BW is looking at the original invoice posting date and not recognising the date that the partial payment was made.
How do I make BW to recognise the partial payment date when a partial payment has been made for the aging instead of the original posting date?
I hope this was not too confusing.
ThanksHi Kartikey,
Thanks for the response. I am not calculating the subtotals at the in the query definition and the sub totals are based on the info object 0customer's setting in the query designer to suppress the result rows. In RSRT also I am unable to get the sub totals.
If I remove the calculations (aging buckets) and display direct key figure in the columns, I am able to get the sub totals.
Is there any specific reason why the sub totals can not be calculated if the columns are calculated key figures/new formula.
Can any one let me know how to fix the sub totals.
Thanks -
my iphone wont turn on but when i plug it in to charge the apple logo comes on and turns back off after a few seconds i dont know what to do i need help
Hello warhogs17,
After reviewing your post, it sounds like the iPhone will not turn on past the Apple logo. I would recommend that you read this article, it may be able to help the issue.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
Hey I just got an iphone 4 and everytime it gets to around 47% battery it dies, when I try to turn it on it says the battery is dead, when i place it in the charger it says 47% then continues to charge, could this be over heating or a bug? What is it and how do I fix it?
Hopefully one of these steps should solve the problem.
1. System Preference > Sound > Output > Internal Speakers
Highlight Internal Speakers
Make sure that Mute is not enabled.
2. Remove the headphone.
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 times to flip the microswitch inside.
Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
Audio Devices window
Side Bar
Click the Built-in Output.
Under Mute any of the boxes checked? If so, uncheck it.
6. System Preferences > Sound> Sound Effects
Play sound effects through:
Select "Internal speakers" and then back to "Selected sound output device". -
What can i do to get my phone working. It went to a black screen when I was playing a game. I pressed the power and home button then it showed the apple logo and went back to a black screen. Doesn't came on, show a charging sign, read on iTunes.
Press and hold the home and power buttons for 15-20 seconds until the white Apple logo appears.
-
My Iphone 4s is plugged in charging after it has fully died. Instead of the apple appearing and staying constant on the screen...the apple is blinking. What does this mean and how do I get the phone to charge/turn back on.
- Try:
iOS: Not responding or does not turn on
- Next try letting the battery fully drain. After charging for a least an hour try again
- Last, make an appointment at the Genius Bar of an Apple store, it appears you have a hardware problem. -
I bought a free app(Documents by Readdle) for free. In my account I had $6.37 but now I have $3.19!! I don't understand why because it was a free app? What do I do and how do I get my money back?
Hi caw52,
Welcome to the Support Communities!
The following information should help you with this:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
Judy -
How can the dunning letter shows O/S amt and corresponding aging bucket?
Hi,
I am going to implement the dunning letter setup in R12. Our user request to have the dunnng letter layout which should show all regular dunning details but also the aging info of the outstanding invoices, i.e. which aging bucket the outstanding amount will be shown. Anybody have idea and help? Thanks a lot.
EdmondThank you Nagarajan. I have a dunning letter created in Crystal Reports for our client. It is fairly limited in scope, it just has the customer name and address, invoice numbers and dates, amounts due and the text they wanted in it.
I can import it into B1 9.0 and set it as the default for Dunning Letter #1 and it runs, but unlike other formats where there is a DocEntry and/or ObjectID and a ?DocKey@ or ?ObjectId@ parameter, how do I limit the report to just one customer? Typical document layouts run for the document that's on the screen. In the dunning process, the report runs once for every customer when the Dunning Letter Method is set to "One Letter per BP". I have to limit the report to one customer at a time. Right now, each dunning letter based on the Crystal report is identical and it contains all the data for every customer.
So, does anyone have any ideas for what selection criteria needs to be included in the Crystal report to have it select just one customer from the dunning wizard tables? Thanks.
Michael
Edit: I created a ?WizardID@ parameter and a ?CardCode@ parameter to limit the report to a single dunning wizard event and a single customer. While it works fine in Crystal itself, it doesn't work in B1 at all. I had thought that by limiting the report in this way, it would only create dunning letters for a single customer. -
What is the best app for backing up my mac. I do publication work and need to save my work?
what is the best app for backing up my mac. I do publication work and need to save my work?
My answer does not have the black Apple logo but the hardearned black belt of (bad) experience.
There is one problem with TimeMachine. It can get corrupted out of the blue with no warning and it will not want to restore correctly (as an added "bonus" you get to find this out the "hard" way, when you need it most). Plus it takes ages for the data to be copied back, sometimes days. Haven't tried my 600gb backup on Mavericks but Mountain Lion had this knack of breaking Timemachine after a couple of months.
To back up my entire server is use SuperDuper. It mirrors the drive to an external one (usb for example) The cool thing is you can use that usb drive and start the OS X from it (by holding Alt when you hear the boot chime).
This way you have a working copy of your entire machine. You can even go to another mac and boot it from there. I literally ran the OS X Server in my company from a usb drive on an old MacBook Pro until i got around to fix the problems with the actual server machine.
This has saved me twice already as the Hitachi drives Apple uses, tend to die like clockwork after 4000-5000 hours of use with no warning.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
PS. As a sidenote... SSDs are more reliable than a normal HDD (not to mention faster) I can't stress this enough, my Server is on two SSDs now. I can't tell you how stress free the setup is, it doesn't feel like a computer but more like a router, it just works... forever. After two years with SSDs my server has had two days of downtime and their health is at 97%, they will literally last 100 years with normal use. I'd go so far as to recommend you buy an SSD and move your old HDD to an external enclosure and use that as a usb backup. (for SSDs i use Plextor / Lite-On M3s (older) or the M6s (newer)) -
I send my iPhone to apple because my standby button doesn´t fit, what exactly should i send to apple? earphones and charging cable too?
No! All Apple needs is your actual phone. Do not send the box or anything else as they will throw it away and you won't get anything back except for a phone! Do not send the sim card either and make sure you backed it up!
-
What is the best way to back-up my Hi-8 video tapes and then load them onto my i-Mac so I can edit them on i-movie? A camera store will convert them to DVD for $32/120min. Will I lose a lot of quality that way?
Quality is not much of an issue with Hi8, the main issue is age of the tapes. The older the tapes, the more degraded the images are going to be. Regardless of how you transfer the video, the quality is going to be pretty much the same.
The "best" way depends on how valuable the images are to you and how many tapes you have. I did a similar project last winter with a collection of 14 Hi8 tapes that dated from 1994 to 2002. I bought a converter bridge (Canopus), maximum RAM for my Mac, and a huge hard drive. I also decided to get Final Cut Express because it had more ability to enhance the pictures after downloading them. I am very happy with the results, but it cost me nearly $1200 for the upgrades, equipment, and software.
The only other thing to consider is to be sure that if you go with an outside vendor (like the Camera Store) that the files they provide for you will be in a format that iMovie can recognize.
Good luck. -
Apple IPod Silver slim-line.: Lost for many years, found and charged it. Turns on Has picture of IPod on the screen with an unhappy smilie on it.
Message says contact Apple.com/Support.
On Back designed by Apple California made in (China) I think. 1st row of numbers A105 EMC 1984: 2nd line Rated 5-30Vdc; Last line 1.0A max
Can you please tell me how to make it work bearing in mind that I am not really computer literate at 72 years of age?
It has engraved on back in strange printing FC (c) inside C C E a screen with double square perimeters inside the letters V(Cc) I then a Tick in a circle. That is all apart from the apple with a bite out of it.Take a look at this article: iPod displays a sad iPod icon - Apple Support
-
Can friends and family option be disputed or charged back ever?
Hello I was wondering if someone sends money using "friends or family" option, can it ever be charged back or disputed? In the past I have sold online game items (Ingame currency and items) for real money. I always give the buyer what he paid for and what we agreed to. Now a few times the buyer will dispute the charge, deliberately scamming me after I have gave them the item / gold. I literally have no protection because I'm selling an online item, therefore there's no shipping. I'll sell $50 in gold (in game currency to the buyer, and I'll give it to him. Then a few days later he'll dispute it on purpose to scam me because he knows he'll get away. I HATE scammers, and I'm tired of getting scammed.I'm tired of getting ripped off, and losing the items that I worked hard for to get.
So I'm wondering if someone sends me money via friends and family option can it be disputed or charged back? It seems like this is my only option. I'm a honest seller, and I always give the buyer what he wants. I'm tired of getting scammed because paypal always goes with the buyer. So I'm down $50 and they just keep the items I gave them. I REALLY need to know. So if someone sends money using the option friends and family, can it be disputed?
1. You are not allowed to sell and ask a buyer to pay using the friends / family option, if paypal realise that is what you are doing you risk your account being limited. 2. A person can't dispute a friends / family payment BUT they can do a chargeback directly via their credit card company if they used a c.c. to fund their paypal payment. ************************************** I give up my time to help you so a thank you or kudos would be cool.
Marking one of my replies as a solution would be appreciated if I sorted your problem. -
What does it mean when your screen just goes black and will not turn back on? I can connect it to computer to charge and it recognizes it and charges it but no picture on screen.
Hey Krkirst10,
Thanks for the question. It sounds like you may have a hardware issue with your device, however let's try to isolate as much as possible to determine if that is so. To isolate the issue, follow the regular troubleshooting steps for power issues:
Will not turn on, will not turn on unless connected to power, or unexpected power off
1. Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
2. Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
Learn about LCIs and corrosion.
3. Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
4. After at least 30 minutes, if:
- The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen. Then unplug the phone from power. If it immediately turns off, seek service.
- The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
- Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
5. If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
- If the display turns on, go to step 4.
- If the display remains black, go to next step.
6. Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
7. If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
My issue is still not resolved. What do I do next?
Contact Apple Support.
For additional information, see this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thanks,
Matt M.
Maybe you are looking for
-
Hello i took a class in the past on java programming and we used a program called jpad. I was wondering if anybody knew anywhere i can download this program or other programs for java programming. Thanks, Jim
-
I wish to re attach my device to my iTunes account but I do not appear to have the manage devices option - someone please help
-
TableView and TablePosition problem
Hi, I have a little problem about the use of TablePosition for the TableView control. I use a listener on tablePosition to get the selected rows. Here's the code: ObservableList<TablePosition> tablePositions = getSelectionModel().getSelectedC
-
Firefox freezes the computer for about 20-30 seconds (not even Alt+Tab works), the screen blinks black and then it shows the desired page. Does that several times at the beginning, then sort of stabilizes. This happens even if I simply hover the mous
-
Retrieve one key software for G550
I have Lenovo G550 and I did partition my hdd (C drive). And one key recovery is not working. Lenovo tech support told me that I will have to send it to its depot at Texas. Is there anyway to retrieve the software by myself ? If I make a disk out of