What is AirPort Extreme?

Hey guys, i was just wondering what AirPort Extreme actually is.
Looking around, i think it's just a good router that provides 802.11ac wifi and is really fast....
1. Is the Extreme just a normal router from Apple that supports 802.11ac wifi? Nothing special to it?
2. I dont know anything about these stuff...but in my current router, i can connect an internet cord to it, and there is another internet cord that i can connect to my desktop. I'm not sure if you guys will understand what im saying....but basically, my router has a internet cord go in and go out. The Airport Extreme doesn't seem to have an internet cord come out. Does that mean i won't be able to use wired internet if i choose to use the airport extreme? My desktop supports wireless internet so it doesnt matter but wired internet always seems faster than wireless, expecially in a desktop where i play a lot of online games.
3. I also heard that you can conect an airport extreme to your current router so that you can increase the area of connectivity. Am i correct? So i can basically have 2 routers in my house using the same internet cord? (one in my current router, and the airport extreme without an internet cord?)
4. Can you use it with windows?
if you are confused with any of my questions, please ask!
anyways, thank you in advance

1. The most recent AirPort Extreme supports 802.11a/b/g/n/ac. There's nothing special.
2. Are you referring to the DSL port? In that case, you have a modem-router. If you want an AirPort Extreme, you need a modem where the DSL cable is connected to, and then you have to connect the AirPort Extreme to the router using an Ethernet cable connected to the WAN port of the AirPort.
You can connect your computers wired to the AirPort Extreme. It has got four Ethernet ports.
3. Correct.
4. Of course. If you want to set up the AirPort Extreme with Windows, just download AirPort Utility and follow the steps > http://support.apple.com/kb/dl1547
After setting up the AirPort Extreme, you don't need any software to connect to it

Similar Messages

What replacement Airport Extreme Card do I need for Macbook Pro 8.2?

It looks like my Airport Extreme Card has failed, although the Blue Tooth is fine. I'm assuming that I need to buy a replacement but am struggling to find what I need. I have a Macbook Pro 15" early 2011 i7 2.2ghz so just need to know what cards are compatable.
It's been a slow failiure, over a couple of months but now it is not even recognised in the System profiler. I am happy to open the case and install a new card, I just need t know what will work. Is there a better card than the original out there, or even an upgrade? I've upgraded the Ram and had to change the HHD already, so as a machine it's starting to resemble the Philosopher's Axe...
Any advice would be greatly appreciated!

Hi Ralph,
Thanks for the speedy response!
I"ve had the case open when I changed the HHD and Ram, and can seen where the card slots in. It's held by a supporting arm which lifts up when disconected from the Logic Board. it's weird looking inside, as you can see there are many of the same componants I've seen in other laptops. It is a tidier build though. I'm confident that if I detach the 3 antener conectors and remove the retainer screws a new card will fit back in.
The Genius Bars here in London are highly over subscribed, and I don't think I have the time or budget for that.
I'll keep plugging away, and see what happens. I'm almost getting used to being tethered to the Ethernet cable. I've only tripped over it 20 times a day!
Take it easy.

What causes airport extreme base to crash every day?

this is the newer gigabit version.
i lose airdisk and am unable to access the base with airport utility.
it works for a while but it is guaranteed that it crash at some point during the day
whether i use it or not and whether the computer is on or not.
only way to get it going again is to unplug the power.
thanks for any advice.

Have you updated the firmware to the latest version? The 7.2 versions were pretty bad about locking up. If so, have you tried a factory reset and reconfiguration?

Slow Airport Extreme on wifi

I have a new Macbook with a factory installed airport extreme card (80211). It is very slow linking to the internet. It is constantly going in to scanning mode. I have to click on that to turn Airport on and even then it takes forever to have a page download. It has happened in other locations too so I don't think it's my Internet connection....Any ideas?

Steve,
There is no such thing as a "factory installed airport extreme card." I think you intended to say your Macbook has Airport. Can you tell us how you are trying to connect to the Internet? Do you have a wireless router (that is what an Airport Extreme is) and if so what kind?
Airport is Apple's implementation of 802.11X WiFi, however in order to make it work it has to wirelessly connect to WiFi router which is connected to Internet (DSL or Cable) modem.
This link is information on Airport Extreme.
http://store.apple.com/us/product/MB053LL/A?fnode=MTY1NDA0Mg&mco=MjE0NDc3Ng
If you don't have a router connected to your Internet Modem then your Macbook will continue to scan and not connect until it can locate a WiFi router.
Regards,
Roger

Airport Extreme & WPA

Just wondering what the airport extreme card is like with WPA? The wireless network i'm going to attach it to does not use the AP Extreme or Express does that make a difference?
Thanks

Just wondering what the airport extreme card is like
with WPA? The wireless network i'm going to attach it
to does not use the AP Extreme or Express does that
make a difference?
Peter,
I'm using a 1.33Ghz 17" Aluminium PowerBook G4, 1.5GB of RAM, with an Airport Extreme card built-in at order time, along with a Netgear WG302 Access Point plugged into a Netgear FVS318v3 Firewall VPN Router. I am currently using WPA2 Personal level security with my laptop & everything is working great.
In order to get the best transfer rates possible, I am using IPNetTuner (with a custom script) from Sustainable Softworks.
Regarding both software & hardware: I have no interest in or other connection to the two companies mentioned.
I happen to be a disabled programmer/analyst with enough healthy-free time "on my hands" to do my research and pick out the components I think will work best for my projects.
After reading how ineffective WEP security is, I knew from the get-go that I wanted WPA or WPA2. Fact is, if I could figure it out (still working on it), I would run a Radius Server and use WPA2 Enterprise level security.
Although some may disagree with my choice of Netgear products, both items are from the business-class of products called the "Pro-Safe" line of gear. After much reading, I felt that they would best suit my needs / budget, and my curiosity to explore new technology I haven't worked with before (networking). HTH.
Regards,
Albert
G4 QuickSilver01 OWC 1.47Ghz CPU 1.5GB RAM 740GB HD Mac OS X (10.4.3) 17" Al PowerBook G4 1.5GB RAM 75GB HD Aiport Extreme Card

I just replaced my airport extreme and now the amber light on my airport express is flashing and so it is not being recognized. I have been on the computer and gone to airport utility and it is simply not showing up at all. What can I do?

I just replaced my airport extreme and now the amber light on my airport express is blinking. When I go to utilities and try to find the airport express it does not show up.
What should I do?

Anytime you change networking hardware it is always a good idea to perform a complete power recycle of that hardware. Check out the following AirPort User Tip for details. Please post back your results.

Problem consistently printing via new (summer 2011) AIRPORT EXTREME BASE STATION and Brother wireless printer (model HL5370DW). What am I doing wrong?

Thanks in advance for any help you folks can offer. I'm a newb here and will try to offer as much detail as I can about the dilemma at hand.
Scenario: Home network has been recently set up for wireless internet access via NEW Airport Extreme Base Station (purchased September 2011). Units accessing the network include: 2011 Macbook Pro, 2011 Macbook Air, 2007 Macbook, 2009 Macbook Pro, 2 iPhone 3GSs, and a 1st-gen iPad (and a partridge in a pear tree AEBS is configured to run WPA2 encrypted network, as well as a WPA2 guest network. I am attempting to yoke a BROTHER HL5370DW wireless B or G/ ethernet / usb-capable printer to the main network such that any and all units can print wirelessly or its equivalent (i.e., via printer hooked to AEBS through USB hub)
Problem: Despite configuring the Brother printer to recognize the main WPA2 network I created, I am unable to get wireless printing to work. My workaround was to physically connect Brother printer to AEBS via USB, specifically using a Belkin USB hub (after all, I wanted access to usb drives, as well as the printer). This workaround works ONLY SOME OF THE TIME. Generally, after a fresh boot of any computer or after a restart of the AEBS, any given computer will be able to print (i.e., any computer wirelessly connected to the main WPA2 network recognizes the printer). HOWEVER, at random times, printer access is gone (as is access to USB drives connected to AEBS's usb hub). Wireless networks are still up and running when that happens. IS THERE A WAY TO GET THE USB HUB's devices (i.e., printer and usb drives) to ALWAYS REMAIN AVAILABLE AS LONG AS THEY STAY CONNECTED TO THE AEBS? In other words, what accounts for the intermittent loss of the usb peripherals?
Sometimes, I just shut the airport off on whatever computer is having this problem, and the problem goes away. Sometimes, the problem is present across all computers in the house, sometimes only a few are affected. I can ALWAYS see the AEBS in the Airport Utility if the AEBS is connected to the particular computer via ETHERNET CABLE.
My theories:
- true wireless printing (i.e., without usb hub workaround) doesn't work because the N network somehow isn't backwards compatible with the Brother printer, which, i believe, is B/G. Although...isn't Wireless N networking supposed to work with BG devices? I did find a thread (https://discussions.apple.com/thread/2570774?start=0&tstart=0 ) that explains some of the particulars of WPA2 encryption and Wireless B/G issues, but it was beyond my level of comprehension (I'm a psychologist, but not an Apple Genius
- The usb workaround is only intermittently viable because of some flaw in the Airport or Airport Utility that causes dropouts to happen when a Macbook Pro or Air's lid gets closed or one gets opened after having been at a different network (e.g., at my office).
QUESTIONS:
- Should I try to use my old router (7 year old Linksys WRT54G) as an access point and connect the Brother printer to that G-router? How do I do that?
- I wouldn't mind just relying on the usb hub method if I could just insure more consistency (i.e., no random dropouts of peripherals). How could I do this?
Rule out:
- wireless printing works on my printer - it was being recognized back before the AEBS. I had the Linksys router running a WEP network and had the wireless printer talking with no cables to the router and the computers. (I just don't want to revert to using WEP encryption given its lack of security and my trying to protect HiPAA related health information on behalf of patients)
Any help will be greatly appreciated.
Thanks in advance!

13 ASCII characters = 104 (aka 128)-bit WEP
encryption
If turning off WEP works, then you just need to
provide the cameras with the "Equivalent Network Password".
One of the problems with WEP is that the actual
standard relies on a 10 character HEX key for 40bit
WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier, vendors use certain
algorithms to convert simple alphanumeric passwords
(or passphrases) into HEX keys, thus enabling the use
of simple easy to remember WEP password rather than
lengthy HEX keys. The problem is that different
vendors use different algorithms to generate the HEX
key and therefore a ASCII password on an AEBS will be
hashed differently on a non-Apple client and vice
versa.
You may find the following article helpful:
- Apple article, especially the part about
"Third-party client to Airport".
Brilliant idea about trying the system with No encryption on... that DID solve the problem... almost.. once I turned off the encryption option, and restarted the Airport, I got a dialog box showing that the "Base station needs attention" but it didn't indicate WHAT kind of "assistance" it needed. Nonetheless, I closed out of the Airport program only to find that the indicator light, which had been Green, was now, flashing Yellow and I could not connect anything, including my computer. I opened the Airport program again and found the ONLY way I could get the Green light on was to select some sort of encryption option... then the light would go Green again but my cameras would not hook up again, and when I went back in and ONLY changed the option to NO encryption, I got the yellow flashing light and the "this base unit needs attention" warning...
I think your suggestions are almost on the mark... is there any way of reconciling the WEP coding between the cameras and the Airport??? Or turning off the encryption option and STILL have Airport work?
Thanks again for your help and suggestions... I really appreciate it.
geoff

What is the best way to make 3g/4g simcard work with airport extreme

I live in Mumbai, India and I am tired of the state of broadband connection over here. I have vodafone 3G Data only SIM with me which I use via a 3G dongle that plugs into my mac. It has a decent speed and I would like to use it as a primary internet connection across the 3 iPhones, 2 iPads, a Mac and 2 apple tvs at my home.
I have a 2014 airport extreme and i want to know what hardware do i need to make the 3g sim work with it? like put the sim in the hardware/adapter and then plug it into the wan port of the airport extreme and let the AE handle my dhcp so that i can access 3g internet from all my devices?
also, i was something 4g compatible as 4g is on the roll in India. it doesn't have to be a wireless router on its own but something that can dial the connection and provide internet access to the AE via the wan port.
thanks.
Neerav

The only reason I mention it would be configure your network for a roaming instead of extended setup. The number one advantage over an extended is bandwidth performance ... aka speed.
For example, I have a Cisco RVS4000 wired router as my main Internet router. I am fortunate that my 2-story home came pre-wired for Ethernet. I have placed an AirPort Extreme and a Time Capsule, connected by Ethernet back to the Cisco; one on each floor to provide a seamless wireless network for an assortment of wired/wireless clients. With this setup, I am able to stream HD TV content throughout the house. Mine is an example of what you can do with a roaming network.

We use an Airport Extreme in my office, which works fine for me. Occasionally we need to have more than one computer running on it, but for some reason it won't connect to the internet. It says we have internet, but won't connect to wifi. What's going on?

I use my computer everyday in our office and have no issue connecting to the internet/wifi, but when my boss comes in and tries to connect it doesn't work. It tells her she has internet, but won't connect to the wifi. We've tried a few different tactics(the basic ones I've seen on here), but nothing seems to be working for us. My computer automatically connects to our wifi.
Just recently the Airport Extreme has started with the blinking amber colored light on the front, which I believe means something is wrong? Can anyone help us figure out what's going on and why we can't get my boss' computer to connect as it should?
Thank you!

Here's an update:
Now the light is not blinking. It's a solid, consistant green. I don't know if it helps to narrow it down or anything, but I just figured I'd mention it.

Airport Admin Utility can no longer access Airport Extreme, what now?

I have an Airport Extreme that worked fine for a long time with a specific IP. They sold out and the new company came in and installed new equipment. The settings had to change on the Airport. After that, I lost my ability to print through the Airport USB port.
I tried to resolve the problem the other day. My Airport Admin Utility saw the Airport, but I couldn't access it. When I clicked configure, a window came up saying "Reading configuration from base station", then a Password login window came up. I enter my password, it says "Reading configuration from base station", then it says "An error occurred while trying to access the base station. Make sure your network connection is valid and try again.". It does the same thing whether I enter the right or wrong password.
It started working unexpectedly for a little while. I experimented with some settings. Now I can't access it again. The Airport Admin Utility sees the Airport as 10.0.0.0, my laptop's IP says 169.xx.whatever. I thought the Airport was supposed to distribute IP addressed. It did for awhile after I set it that way, but then it went back to 169.xx.whatever.
I'm lost. I don't know how I will ever access the Airport again. Or get my printing capability back.
Help!!!

Ok. I'm going to try a reset on a day where I have some time to mess with it. There are some things I need clarified for me about settings. Please correct me as needed.
In the internet tab:
-Connect using Ethernet is selected.
-Configure Manually was selected before as it is now.
-IP address: do I use their IP or 10.0.0.0 or 10.0.1.1 or what?
-Subnet mask: It used to be 255.255.255.0 now it's 255.255.0.0.
-Router address: What do I put here, use their IP or 10.0.0.0 or 10.0.1.1 or what?
-DNS servers: I will enter their DNS servers.
-Domain name: blank
-WAN Ethernet Port is selected Automatic.
Under Network Tab:
-Distribute IP adresses is checked.
-Share a single IP address (using DHCP & NAT)used to be checked, now Share a rnage of IP addresses (using only DHCP) is checked.
-DHCP Lease: 4 hours. What is best here?
Do I really need to worry about anything else? If the password is reset how to I access from default settings?
Thanks, after this I should have a better understanding of network settings and the AEBS.
J-

The USB port on my 4th generation Airport Extreme does not recognize any peripheral devices whatsoever. In other words, it does not function at all. What can I do?

I have had my Airport Extreme for almost a year now. I have not been able to get it to work. It has never worked. I have tried everything in the apple manuals, my peripheral device manuals, and online help. My Airport Extreme Base Station has a completely dead USB port. The USB connector does have voltage and ground. Apparently there is no data transfer. I do not know how to test the data pinouts. I don't know if it is a software or driver problem, or if it is a hardware or wiring problem. My computer is a mid-2009 13" MacBook Pro. All of my external devices work well with the MacBook Pro. The USB functionality on the MacBook Pro has always performed without a glitch. It seems the problem with the Airport Extreme must either be a network communication problem or a hardware/hardwire problem. I bought the Airport Extreme to build a home inTRAnet network. I have a seperate 3rd party router for inTERnet. Contrary to what the manuals declare, the initial setup of my Airport Extreme requires inTERnet setup during the process. Even when the choice is made to limit the network access to LAN only, when I reach the end of the setup process, a prompts reads that the Airport Extreme may not function because I have not set it up for inTERnet with the WAN. Well, Dah... during the intial stages of the setup I told the machine to configure an inTRAnet only LAN setup. So... I went ahead and set it up for inTERnet and WAN. Either way, the USB port is not working. Then I set it up for the whole package, WAN, LAN, and everything. Still... no function out of the USB port. Any ideas?
P.S. The Ethernet works and so does the 802.11 tranceiver. The USB port is the only problem, but a major, major one for my needs. There is no peripheral functionality.

Okay so I figured it out. I inherited the Configurator already set up so I didn't realize that our former administrator was brilliant and set things up a little differently. To anyone else who finds themselves in this spot try this:
After you plug the iPad in and open Configurator instead of trying to 'Prepare' the device click 'Assign'
There should be groups of Users listed on the left hand side of the screen.
Select the group you want the ipad to be a part of, or make a new group. ***Note a group can be one person so this is a good feature for teachers to have individual app assignements for students.
After you select the user group click the little plus ( + ) button on the bottom of the screen under the second column of info where names and device serial numbers should appear.
Type the name of the person, group, whatever you want to identify that assignment by into the blank that pops up after you hit the plus ( + )
Then select the assignment you just made and tohe 'Check Our' button at the bottom. At this point a box will pop up with a window at the top listing all devices supervised by Configurator. There is a tiny down arrow button that opens a scroll down menu to the right of this box. Click that, then select the device connected by USB as the one to assign.
The name of the assignment you gave it will show on the lock screen now and you can assign apps and profiles to the device like you would any other device in your Configurator inventory.
Good Luck.

Icannot get my pcs to see the external hard drive when I attatch it to the usb port of the airport extreme. They do recognize a thumb drive but will not see the external hard drive. What do I need to do. The ext hard drive is a "MY PASSPORT" with no pw

I need assistance getting my windows computers to see my external harddrive attached to the airport extreme. It is a my passport. The disk shows on the airport utilitiy but neither of my pcs can see it. If i connect a simple thumb dirve they see it just fine.
What do i need to do to get this to work. There is no password on the external hard drive at the moment. I tried removing it to see if that would work.

There are a number of posts related to access issues between Windows Vista / 7 and AirPort Disks. Two potential solutions being forwarded are: 1) Changing the LAN Manager authentication level, and/or 2) Disabling the Windows Search feature.
To change the LAN Manager authentication level:
From the Windows Vista / 7 desktop, click Start
Search for: security
Click 'Local Security Policy'
Goto Local Policies > Security Options
Under Policy, double-click 'Network security: LAN Manager authentication level'
Change level to: Send LM & NTLM responses
Under Policy, double-click 'Network security: Minimum session security for NTLM SSP based (including RPC) clients'
De-select 'Require 128-bit encryption'
Click OK
To disable Windows Search:
Start > Control Panel > Programs > Programs & Features
On the right-hand side, click "Turn Windows features on/off"
Scroll down, and de-select "Windows Search".
Press OK, close all windows and restart.
A third "solution," that has worked for me, is verify that both the AirPort base station and the Win7 PC are using the exact same Workgroup Name. In my case, I use "WORKGROUP" (without the quote marks) for this name. From the AirPort Utility, you would enter this value on the Disks > File Sharing tab. On Win7, Start > Control Panel > System and Security > System > Change Settings > Change > Workgroup

What happened to my airport extreme that airport utility says used to be part of my network but no longer is found?

I have been working on regaining wireless printing from my MacBook and just discovered something new to me. I brought up Airport Utility and received a screen display showing my network. The diagram box for the Airport Extreme has a warning icon and clicking on the diagram box for the Airport Extreme brings up the message that my airport extreme cannot be found and that it USED TO BE part of my network. The only help given is to check the device and make sure it is plugged into power, within range and connected to the Internet. Its been a long time since I last set up the Airport Extreme, but it is powered up, in the same place and connected to my cable modem as before. I continue to have wireless connection to the Internet from my MacBook and iPhone. What I do not have is wireless connection from the the MacBook to my Brother Printer as I did until, for unknown reasons, it stopped working.
So far, I have checked all the help for the printer problem and wonder if my problem is in the Airport Extreme? The printer does find the Airport Extreme, but still does not print wirelessly, only by attaching it with USB cable to the MacBook.
Resetting the Airport Extreme will wipe out that setup, but should I do this anyway? Might it help the printer problem.
Thanks for your help. I've worked on this a long time using available material.

I see now that long questions are not going to be read and answered. Understandable. Since writing this I got help on one aspect of question and now have Airport Extreme visible through Airport Utility and it seems to work. However the wireless printer still does print. On the printer's screen, it recognizes my wireless network and connects. When I try to print from the MacBook, the usual printer icon comes up, but with Printer is Offline. Printer is Not Connected. So far, nothing in Apple or Brother help has given me answer to this problem. Any ideas would be appreciated.

What are some of the best iOS apps can remotely played videos, audios, photos and text files from a NAS hdd connected to Airport Extreme USB port? And how to configure this setup?

I have already set up NAS hdd as connecting it at USB port of Airport Extreme, i also want to remotely access it from iPhone, so what's the next step? What are some of the best iOS apps can remotely played videos, audios, photos and text files from the NAS hdd and how to configure this setup?

*Edit - I am not able to connect to the NAS when hardwired to the airport extreme.

What are the best settings to use for the newest AirPort Extreme (AC wifi) with my optimum online service provider?

I have the current generation of the AirPort Extreme and a handful of devices that utilize the new 5Ghz A/C frequency. My internet speeds were blazing fast when I had first set it up but lately it has been lagging terribly. I was told that changing my dhcp did help, which it did it seems like it might be back to its normal speeds but I just want to know what are the best settings to configure for the airport so that I can get the most out of my service on all my devices? I'm using a CAT 6 cable which does help, I have a guest wifi setup with a wifi password which I understand will slow it down a little. Can anyone just point me in the right direction or just give me a step by step guide on what settings to configure? Should I really consider turning off the guest network?

I am assuming that you are looking to configure your network to provide the highest level of bandwidth possible for your network clients. If that is the case, the following are a few things to consider:
The Internet modem should support Gigabit Ethernet. That is the Ethernet connection between the modem and your 802.11ac AirPort Extreme should be Gigabit Ethernet.
Use CAT-5e or CAT-6 Ethernet cables between all wired connections.
Only expect 802.11ac performance with 802.11ac clients in the same room as the base station.
Eliminate or significantly reduce any forms of Wi-Fi interference on both the 2.4 & 5 GHz bands.
When streaming, especially HD video on your local network, use wired connections between the host and player devices when possible.
Other than the above suggestions there are no "magic" settings that you can make on your AirPort. Note: The Guest network shares the same bandwidth as the "main" network. Unless you have a network goal to provide this type of network, it is best left disabled.

What is AirPort Extreme?

Similar Messages

Maybe you are looking for