What is alignment in unicode and what are restrictions

what is alignment in unicode and what are restrictions, dont give about unicode i want only about alignment in unicode
Points will be awarded if usefull

Hi,
Check the following Threads,
what is internal and external encoding in unicode
Unicode
UNICODE
Regards,
Padmam.

Similar Messages

What is causing this problem and what are you doing to fix it? Should I just go back to Internet Explorer?

Every single day, Firefox crashes and sometimes in the most inopertune time. This is very frustrating as some of the times I can not go back in and correct what I was not able to do due to your site crashing. What is causing this problem and what are you doing to fix it? Should I just go back to Internet Explorer?

First, you must use a specific [[Managing profiles|profile]] for Firefox 4.0 Beta and keep your current one for Firefox 3.6 to prevent interferences between the two versions.
For your problem:
# [[Troubleshooting extensions and themes]] could be a cause.
# If not 1. and if it does not happen in [[Safe Mode]], you must disable HW acceleration in Options > Advanced > General. If it solves your issue, your graphic driver is out-of-date and must be updated. Go to your computer manufacturer support site.

HT1688 My iphone 5 won't charge and it's in perfect condition, I dont drop it and it's not cracked. I tried multiple chargers, none of them are damaged and my outlets work with other things so the problem is my phone. What's wrong with it and what should

My iphone 5 won't charge and it's in perfect condition, I dont drop it and it's not cracked. I tried multiple chargers, none of them are damaged and my outlets work with other things so the problem is my phone. What's wrong with it and what should I do? Please help me I need my phone for work.

Make sure there's nothing blocking a contact in the charging port of the phone.

My iPhone 4 turns off (crashes) after accesing any apps, It work fine when plugged to charger. I tried all troubleshooting steps suggested by Apple but it doesn't work. What could be the problem and what are the solutions?

My iPhone 4 turns off (crashes) after accesing any apps, It work fine when plugged to charger (power supply). I tried all troubleshooting steps suggested by Apple but it doesn't work. I backed up my phone. I restored it several times. Even I re-installed iphone software. Also I restored it as a new iphone but doesn't work. What could be the problem and what are the availble solutions?

We can't know if there's a "fixture" because we can't examine your phone. But Apple can. Make a Genius Bar appointment and get your phone evaluated.

What's my RAID config and what disks are working?

At the SunOS 5.8 command line how do I establish what my RAID configuration is and what disks are working and what aren't.
Please!

Thanks again Darren, time has haemorrhaged as usual.
http://www.cuddletech.com/veritas/vxmake/index.html is very good but I'm such an old newbie it's embarrassing.
I can see PLEX (type 'pl' ?) & 'mirr' & 'sd array... ' references but have a long way to go in understanding this. The 'v', 'pl' & 'sd' hierarchy. Must go on a course!
Thanks for empowering me. Any finger paint indicating THIS IS A WORKING / BUSTED RAID COMPONENT would be excessive icing on the cake.
Regards, Martin
jamesw@bloater - /usr/users/jamesw $ vxprint -ht
Disk group: rootdg
DG NAME NCONFIG NLOG MINORS GROUP-ID
DM NAME DEVICE TYPE PRIVLEN PUBLEN STATE
RV NAME RLINK_CNT KSTATE STATE PRIMARY DATAVOLS SRL
RL NAME RVG KSTATE STATE REM_HOST REM_DG REM_RLNK
V NAME RVG KSTATE STATE LENGTH READPOL PREFPLEX UTYPE
PL NAME VOLUME KSTATE STATE LENGTH LAYOUT NCOL/WID MODE
SD NAME PLEX DISK DISKOFFS LENGTH [COL/]OFF DEVICE MODE          *
SV NAME PLEX VOLNAME NVOLLAYR LENGTH [COL/]OFF AM/NM MODE          *
dg rootdg default default 0 1025695775.1025.bloater
dm rootdisk c0t2d0s2 sliced 4711 35363560 -
dm rootmirr c1t2d0s2 sliced 4711 35363560 -                    *
dm rootswap c0t3d0s2 sliced 4711 35363560 -
dm swapmirr c1t3d0s2 sliced 4711 35363560 -                    *
v rootvol - ENABLED ACTIVE 34308072 ROUND - root
pl rootvol-01 rootvol ENABLED ACTIVE 34308072 CONCAT - RW
sd rootdisk-B0 rootvol-01 rootdisk 35363559 1 0 c0t2d0 ENA
sd rootdisk-01 rootvol-01 rootdisk 0 34308071 1 c0t2d0 ENA
pl rootvol-02 rootvol ENABLED ACTIVE 34308072 CONCAT - RW
sd rootmirr-01 rootvol-02 rootmirr 0 34308072 0 c1t2d0 ENA          *
v swapvol - ENABLED ACTIVE 35330576 ROUND - swap
pl swapvol-01 swapvol ENABLED ACTIVE 35330576 CONCAT - RW
sd rootswap-B0 swapvol-01 rootswap 35363559 1 0 c0t3d0 ENA
sd rootswap-01 swapvol-01 rootswap 0 35330575 1 c0t3d0 ENA
pl swapvol-02 swapvol ENABLED ACTIVE 35330576 CONCAT - RW
sd swapmirr-01 swapvol-02 swapmirr 0 35330576 0 c1t3d0 ENA          *
v var - ENABLED ACTIVE 1027216 ROUND - fsgen
pl var-01 var ENABLED ACTIVE 1027216 CONCAT - RW
sd rootdisk-02 var-01 rootdisk 34308071 1027216 0 c0t2d0 ENA
pl var-02 var ENABLED ACTIVE 1027216 CONCAT - RW
sd rootmirr-02 var-02 rootmirr 34308072 1027216 0 c1t2d0 ENA          *
Disk group: datadg
DG NAME NCONFIG NLOG MINORS GROUP-ID
DM NAME DEVICE TYPE PRIVLEN PUBLEN STATE
RV NAME RLINK_CNT KSTATE STATE PRIMARY DATAVOLS SRL
RL NAME RVG KSTATE STATE REM_HOST REM_DG REM_RLNK
V NAME RVG KSTATE STATE LENGTH READPOL PREFPLEX UTYPE
PL NAME VOLUME KSTATE STATE LENGTH LAYOUT NCOL/WID MODE
SD NAME PLEX DISK DISKOFFS LENGTH [COL/]OFF DEVICE MODE          *
SV NAME PLEX VOLNAME NVOLLAYR LENGTH [COL/]OFF AM/NM MODE          *
dg datadg default default 40000 1025773419.1122.bloater
dm array1 c4t1d0s2 sliced 14335 495007744 -
dm array2 c2t1d0s2 sliced 14335 495007744 -
dm array3 c9t1d0s2 sliced 14335 495007744 -
dm array4 c7t1d0s2 sliced 14335 495007744 NOHOTUSE
dm array5 c14t1d0s2 sliced 14335 495007744 -
dm array6 c12t1d0s2 sliced 14335 495007744 -
v Saturn - ENABLED ACTIVE 104857600 SELECT - fsgen
pl Saturn-01 Saturn ENABLED ACTIVE 104867840 CONCAT - RW
sd array3-02 Saturn-01 array3 20973568 104867840 0 c9t1d0 ENA          *
v UniQ - ENABLED ACTIVE 10690560 SELECT - fsgen
pl UniQ-01 UniQ ENABLED ACTIVE 10694656 CONCAT - RW
sd array1-01 UniQ-01 array1 0 10493952 0 c4t1d0 ENA          *
sd array1-04 UniQ-01 array1 241203200 200704 10493952 c4t1d0 ENA          *
pl UniQ-02 UniQ ENABLED ACTIVE 10694656 CONCAT - RW
sd array6-03 UniQ-02 array6 209735680 10694656 0 c12t1d0 ENA          *
v bats - ENABLED ACTIVE 104857600 SELECT - fsgen
pl bats-01 bats ENABLED ACTIVE 104867840 CONCAT - RW
sd array2-02 bats-01 array2 104867840 104867840 0 c2t1d0 ENA          *
pl bats-02 bats ENABLED ACTIVE 104867840 CONCAT - RW
sd array5-03 bats-02 array5 146814976 104867840 0 c14t1d0 ENA          *
v ccl_live - ENABLED ACTIVE 104857600 SELECT - fsgen
pl portbase2-01 ccl_live ENABLED ACTIVE 104867840 CONCAT - RW
sd array6-01 portbase2-01 array6 0 104867840 0 c12t1d0 ENA          *
v devel - ENABLED ACTIVE 104857600 SELECT - fsgen
pl devel-01 devel ENABLED ACTIVE 104867840 CONCAT - RW
sd array2-01 devel-01 array2 0 104867840 0 c2t1d0 ENA          *
pl devel-02 devel ENABLED ACTIVE 104867840 CONCAT - RW
sd array4-01 devel-02 array4 0 104867840 0 c7t1d0 ENA          *
v dev2000 - ENABLED ACTIVE 20971520 SELECT - fsgen
pl dev2000-01 dev2000 ENABLED ACTIVE 20973568 CONCAT - RW
sd array3-01 dev2000-01 array3 0 20973568 0 c9t1d0 ENA          *
v ncltest - ENABLED ACTIVE 125829120 SELECT - fsgen
pl ncltest-01 ncltest ENABLED ACTIVE 125841408 CONCAT - RW
sd array1-02 ncltest-01 array1 10493952 125841408 0 c4t1d0 ENA          *
v oracle - ENABLED ACTIVE 62914560 SELECT - fsgen
pl oracle-01 oracle ENABLED ACTIVE 62920704 CONCAT - RW
sd array4-05 oracle-01 array4 346071040 62920704 0 c7t1d0 ENA          *
pl oracle-02 oracle ENABLED ACTIVE 62920704 CONCAT - RW
sd array5-01 oracle-02 array5 0 62920704 0 c14t1d0 ENA          *
v portstrs - ENABLED ACTIVE 104857600 SELECT - fsgen
pl portstrs-01 portstrs ENABLED ACTIVE 104867840 CONCAT - RW
sd array6-02 portstrs-01 array6 104867840 104867840 0 c12t1d0 ENA          *
v spare - ENABLED ACTIVE 20971520 SELECT - fsgen
pl spare-02 spare ENABLED ACTIVE 20973568 CONCAT - RW
sd array3-03 spare-02 array3 125841408 20973568 0 c9t1d0 ENA          *
pl spare-03 spare ENABLED ACTIVE 20973568 CONCAT - RW
sd array2-05 spare-03 array2 419471360 20973568 0 c2t1d0 ENA          *
v sysccl - ENABLED ACTIVE 104857600 SELECT - fsgen
pl sysccl-01 sysccl ENABLED ACTIVE 104867840 CONCAT - RW
sd array1-03 sysccl-01 array1 136335360 104867840 0 c4t1d0 ENA          *
v systest - ENABLED ACTIVE 104857600 SELECT - fsgen
pl systest-01 systest ENABLED ACTIVE 104867840 CONCAT - RW
sd array3-04 systest-01 array3 146814976 104867840 0 c9t1d0 ENA          *
v users - ENABLED ACTIVE 83886080 SELECT - fsgen
pl users-01 users ENABLED ACTIVE 83894272 CONCAT - RW
sd array4-06 users-01 array4 408991744 83894272 0 c7t1d0 ENA          *
pl users-02 users ENABLED ACTIVE 83894272 CONCAT - RW
sd array5-02 users-02 array5 62920704 83894272 0 c14t1d0 ENA          *

HT1386 I am trying to sinc my iPhone with my iTunes to get my music on my phone and i keep getting an error message 42001 pop up when i attempt to sync what is this error message and what do i do to fix this problem??

I am attempting to sync my phone with iTunes and I keep getting an error message 42001 so my phone can not sync with iTunes... What is this error message and what can I do to fix this problem and sync my phone to iTunes?

Dear Apple team,
I recently bought an iphone3GS from USA and jail broke it. Since I heard the there are lots of disadvantages I thought to unlock it officially through the original owner (in copy). He assisted me and confirmed that he unlocked it with AT& T (See the attachment). According to the instructions I restored the phone. But it is not activating with “Activation server is currently not available, please try again or try with iTunes”
When I try with iTunes , it says “you haven’t inserted a SIM” even though I insert the original AT&T SIM.
My current location is Sri Lanka ,so don’t have any apple support.
Please help me to be a good fan of apple.

Hi, my MacBook Pro has become very slow... what could be causing this and what can I do to fix it?

Hi, my MacBook Pro is working very slowly.. what could be causing it and what can I do to fix it??

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

What is the BIS pack and what does it allow?

Hi BBers,
just me again!
I read over this forum the last few days, and got my email/facebook/msn question fixed via going back to the telstra shop and getting a BIS pack for $10/m along with my 1GB data included in my cap plan.
So all emails working well ...
My next question is ... what is the BIS pack, and what does it allow me to do/use? it was 530pm when the sales lady got to me, so she whipped it up on the computer, and sent me packing saying it will all be good in 20 mins .... no real detail except "unlimited email" ... but im sure the other sales person when I bought my phone said "apps, msn, facebook and stuff" were covered by the BIS plan.
So please help me!!!
I have WiFi at home, and can connect to it, but now I dont know when Im using it, or the data pack, or the BIS haha its driving me (and my husband) nuts!
Ok, wait for replies, thanks for all views/posts.
Heather

Hello,
FYI -- "here", as in these forums (which are targeted at BB/RIM services rather than carrier services), would not be the best place to find out something specific for one carrier. With so many thousands of carriers with dozens of different plans each, it's pretty much impossible to keep track of the specifics. The generic information is this:
http://www.blackberryfaq.com/index.php/What_do_I_need_a_Data_Plan_for%3F
But, there certainly can be variations on that given the different packages carriers put together. I do suggest you do as JSanders recommended -- contact your carrier and find out what you've signed up for.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

What is the posting program and what kind of it is?

HI,
what is the posting program and what kind of it is?

Hi,
I am not sure in what context you are talking about. In case of a IDOC, there will be a function module which picks the data in the IDOC and posts the same to the respecitve application.
If you require more details explain the context of the same.
Regards,
Ravi
Note : Please close the thread, if the question is answered

I get power cuts in France. I need a ups emergency power supply. What spec do I need and what is the best manufacturer?

I get power cuts in France. I need a ups emergency power supply. What spec do I need and what is the best manufacturer? I have a Mac Pro from 2007 2 x 3 ghz dual core intel xeon. I would like a machine which will work with a replacement Mac Pro which I will be getting in the next few months. Alan Boyle

1500VA 865Watt
APC in some/most countries
Cyberpower - what I used to replace APC
You do not need pure sine-wave or SMART series which are top price but considered besr may be over-kill

I can't completely control my cursor on my macbook pro, and it keeps jumping to the right of the screen and switching my screen to the dashboard or utilities. Any ideas on what might be causing this, and what I can do about it?

i can't completely control my cursor on my macbook pro, and it keeps jumping to the right of the screen and switching my screen to the dashboard or utilities. Any ideas on what might be causing this, and what I can do about it?

If you have another pointing device installed, remember that the Mac uses "all sources live". You can literally use two or more mice or two or more keyboards at once.
Your trackpad, if that is what you are using, must be very clean. Any debris may be seen as another "finger".

TS4009 My iCloud storage is full and I need to delete some stuff. Can anyone tell me what is important to keep and what not? I have done all I can but it still says I need to delete before I can back up on iCloud.

My iCloud storage is full and I need to delete some stuff. Can anyone tell me what is important to keep and what not? I'm just not sure what I really should back up each night and what doesn't really matter. I know my photo's should back up, but other than that, I'm not really sure.
I have taken some pics off and videos and appt, but it still says I need to delete before I can back up on iCloud. I'm starting to wonder if its a glitch with my personal phone. Can anyone help me?
Thanks!

Only you can decide what's critical to back up. One option is to import your photos and videos to your computer (see http://support.apple.com/kb/HT4083), then either delete them from your phone or exclude the camera roll from your backup in settings.
You might try going to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll), then look at the size of your next backup. If it doesn't go down significantly, something else is wrong.

While importing a CD into my iTunes library I kept getting the following error message- iTunes library cannot be saved- An unknown error occurred (-54). What does this error mean and what can I do about it??

While importing a CD into my iTunes library I kept getting the following error message- iTunes cannot be saved- An unknown error occurred (-54). what does this error mean and what can I do about it??

The CD I imported (in the above post) is now not in my iTunes library. Any help would be appreciated .

I have 2 yr old Iphone 4 and have not backed up or connected to Itunes or backed up for 1 yr. I have new computer and want to connect and copy Itunes folder from external HD to new computer and install Itunes. What steps should I take and what precautions

I have a 2 yr old Iphone 4 and have not backed up or connected to Itunes up for 1 yr. I have new Windows 7 computer and want to connect and copy Itunes backed up folder from external HD (a year ago) to new computer and install new Itunes and new IOS. What steps should I take and what precautions? I don't want to lose any data on my phone such as music, photos, contacts, notes, texts etc, nor lose music from prior backed up Itune folder. Apps should be OK from app store? Thanks for any help.

Hello CosK,
The following guide can step you through the process of using a backup of your iPhone 5 to transfer your content to your iPhone 5s.
Transfer content from an iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
Should one or both of your phones fail to appear in iTunes, the following article provides troublesooting steps that can assist.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen

What exactly is Sand Box and what does it do?

What exactly is Sand Box and what does it do? I think it works in the Security Mechanism of Java as a Byte Code Verifier (or atleast as a part of the Byte Code Verifier)..
Your thoughts please..?

What exactly is Sand Box and what does it do?It's a concept. It means that the executed code (of applets, Webstart apps) has restricted access rights to System resources. So if it tries anything evil, it won't be able to.

What is alignment in unicode and what are restrictions

Similar Messages

Maybe you are looking for