What is an ageing report? What are the data sources used to develop an agin

Hello BW gurus,
I was going thru some of the BW resumes. I could not understand some of the points mentioned below. Kindly go thru them and please explain each of it.
Thank you.
TR.
     Developed AR ageing report, created invoice layout and processed invoices.
What is an ageing report? What are the data sources used to develop an aging report
     Worked on month-end and year end processes such as Balance Sheet Statements and Profit and Loss Accounts.
What data sources does one use to get Balance sheet and P&L accounts tables and fields.
     Involved in the end to end implementation of BW at Reliance Group as a team member.
What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or
a full life cycle project?
     Extensively worked on BW Statistics to optimize the performance of Info Cubes and to create Aggregates.
What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes.
What are aggregates why do you need them?
     Prepared design documents from the Business Requirement documents and identified the
relevant data targets for satisfying the customer requirements.
What are the design documents does one prepare, please give an example.
Is cube a data target?

What is an ageing report? What are the data sources used to develop an aging report
Aging refers to values in different time period ranges. Example, the customer (credit) aging report can look like this.
customer (credit) for current period, 0 to 30 days, 30 to 90 days, 90 to 120 days. This is the way aging is classified.
What data sources does one use to get Balance sheet and P&L accounts tables and fields.
For P&L information, you may use 0FI_GL_6 datasource (or 0FI_GL_10 if you use ERP 5.0 version). This datasource reads the same information used in R/3 transaction f.01 (table glt0).
What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or a full life cycle project?
Requirement gathering, blueprint creation, development etc
Refer to posts on Sap Methodology and Sap lifecyle
What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes. What are aggregates why do you need them?
Please check these links
http://help.sap.com/saphelp_nw04/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f0/3c8c3bc6b84239e10000000a114084/plain.htm
What are the design documents does one prepare, please give an example.
Design document is basically a document to say how the design is to be developed for a particular solution ex: FI it says what is the data fow and what are the data targets to be used and how data shld be stored for providing the client a solution they need.
Is cube a data target?
Yes cube is a data target.
Hope this Helps
Anand Raj

Similar Messages

What are the data sources for 0FIGL_V10 cube Balance Sheet and Profit& Loss

What are the data sources for 0FIGL_V10 (G/L (New): Balance Sheet and Profit and Loss) cube. and whether we can install business content regarding this.
Please help me out.
thanks,
sapsdnhelp

Hi,
Check this:-------
Urgent: Relevant Master Data Data Sources for FI-GL & FI-AP
http://help.sap.com/saphelp_nw04/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
Regards,
Suman
Edited by: Suman Chakravarthy on Sep 28, 2011 7:33 AM

Problem in activating the data source using a web service

Hi all,
I have created a web service with Logical and Source System names and i have selected nothing in the Type and Release.
Activated the created web service.
Later i tried creating a data source based on this web service source system and tried activating the data sources.
But it is throwing an error saying that error generating the Web Service /BIC/CQWEB_SER_000020000 and error while activating the data source.
Can any one say why is this happening and is there any pre requisites to be done while creating the web service?
what is the use of Type and Release while creating the webservice?
Thanks,
Pra.

Hi
Please consider reference tables also while creating view, otherwise it won't accept when there are amount and currency fields.
Please have a look at the below url
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=genericdatasourceusingview&cat=sdn_all
thanks,
Teja

Can we change the Data source in AO ?

Hi Folks,
Environment: SAP HANA on AO
I have the following scenario , Am creating a report on one Calculation View: CV and have done some analysis where I have pulled in some dimensions and kept some background filters.
Now I have to generate the same report on another Calculation View: CV2 ( Similar to structure of CV ) and compare the reports. Is there any way to edit copy the previous report and change the data source? Can you guide me on that?
Regards,
Krishna Tangudu

Hi,
You can exchange the calc view by clicking on the button next to the data source name in the tab "components", but when you do this, the new data source will overwrite the settings and filters from the previous data source. So no, there is not a supported way of exchanging the datasource and keeping the filters of the previous data source.
Best regards,
Victor

Import option is not showing the Data Source created using ODBC

Hi all,
I'm new to OBIEE, just installed OBIEE 10g in my system with the help of some reply from this Forum (thanks to Kalyan for this).
Now when I tried to create new rpd, the Import option is not showing the Data source I have created. I have created new Datasource in the SystemDSN tab of the ODBC Administrator window,I have tried this by creating the Datasource in the UserDNS tab as well.
Mine is Windows 7 Ultimate. The new data source which I have created through the ODBC Administrator window is to connect to SQL 2008 (I'm trying to get some table from SQL 2008 database), I don't have Oracle data base.
While creating the Data source ODBC Administrator is showing only two drives (SQL Server and SQL Server Native Client 10.0 ) , so I have created the Data source using the SQL Server Native Client 10.0 drive.
Can some one help me to understand the issue and to solve it.
Thanks,
Mithun

By calling your cellular data provider.

While creating the Data source for Sql server am getting this error?

Hi i new to Power BI sites and office 365,
For my first step
1. i have successful creaeted Gateway in Office 365
2.Now i have creating the Data source for that gateway using Sql server R2
3.While Creating the Data source using the Corresponding gateway i have given and next phase set Credentials phase i have noticed one pop up window and it will shows me like
Data source Settings and below in that window it will show's u the things like
Datasource Name.
Loading......
Credentials type:
Privacy Level:
Failed to verify parameter
I will get this results finally ,so hw should i achive this probelm ,Please let me know if any one knows
So kindly give me the proper answer for this.
Regards

Any suggestions for Chinnarianu?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

What are the main tables using in vendor performance report.

what are the main tables using in vendor performance report.
how many select statements are in ABAP reports.

Refer the links -
vendor performance report !!!
vendor performance report
vendor performance report
I need standard vendor performance report
Regards,
Amit
Reward all helpful replies.

What is vendor performance report what are the fields using in the report

What is vendor performance report what are the fields using in the report and i need some sample reports for that particular topic (clasical report)not using any alvs or any advance topics.
U R Satish Patnaik

hi
good
*"Table declarations...................................................
TABLES:
EKKO, " Purchasing Document Header
CDHDR, " Change document header
SSCRFIELDS. " Fields on selection screens
*"Selection screen elements............................................
SELECT-OPTIONS:
S_EBELN FOR EKKO-EBELN, " Purchasing Document Number
S_LIFNR FOR EKKO-LIFNR, " Vendor's account number
S_EKGRP FOR EKKO-EKGRP, " Purchasing group
S_BEDAT FOR EKKO-BEDAT, " Purchasing Document Date
S_UDATE FOR CDHDR-UDATE. " Creation date of the change
" document
*" Data declarations...................................................
Field String to hold Purchase Document Number *
DATA:
BEGIN OF FS_EBELN,
EBELN(90) TYPE C, " Purchase Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created
" the Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EBELN,
Field String to hold Purchase Document Header *
BEGIN OF FS_EKKO,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EKKO,
Field String to hold Account Number and name of the Vendor *
BEGIN OF FS_LFA1,
LIFNR TYPE LFA1-LIFNR, " Account Number of Vendor
NAME1 TYPE LFA1-NAME1, " Name1
END OF FS_LFA1,
Field String to hold Change date and the name of the user *
BEGIN OF FS_CDHDR,
OBJECTCLAS TYPE CDHDR-OBJECTCLAS, " Object Class
OBJECTID TYPE CDHDR-OBJECTID, " Object value
CHANGENR TYPE CDHDR-CHANGENR, " Document change number
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
END OF FS_CDHDR,
Field String to hold Change document items *
BEGIN OF FS_CDPOS,
OBJECTCLAS TYPE CDPOS-OBJECTCLAS," Object class
OBJECTID(10) TYPE C, " Object Value
CHANGENR TYPE CDPOS-CHANGENR, " Document change number
TABNAME TYPE CDPOS-TABNAME, " Table Name
FNAME TYPE CDPOS-FNAME, " Field Name
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_CDPOS,
Field String to hold Date Element Name *
BEGIN OF FS_DATAELE,
TABNAME TYPE DD03L-TABNAME, " Table Name
FIELDNAME TYPE DD03L-FIELDNAME, " Field Name
ROLLNAME TYPE DD03L-ROLLNAME, " Data element (semantic domain)
END OF FS_DATAELE,
Field String to hold Short Text of the Date Element *
BEGIN OF FS_TEXT,
ROLLNAME TYPE DD04T-ROLLNAME, " Data element (semantic domain)
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
END OF FS_TEXT,
Field String to hold data to be displayed on the ALV grid *
BEGIN OF FS_OUTTAB,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
WERKS TYPE LFA1-WERKS, " Plant
NAME1 TYPE LFA1-NAME1, " Name1
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_OUTTAB,
Internal table to hold Purchase Document Number *
T_EBELN LIKE STANDARD TABLE
OF FS_EBELN,
Internal table to hold Purchase Document Header *
T_EKKO LIKE STANDARD TABLE
OF FS_EKKO,
Temp Internal table to hold Purchase Document Header *
T_EKKO_TEMP LIKE STANDARD TABLE
OF FS_EKKO,
Internal table to hold Account number and Name of the Vendor *
T_LFA1 LIKE STANDARD TABLE
OF FS_LFA1,
Internal Table to hold Change date and the name of the user *
T_CDHDR LIKE STANDARD TABLE
OF FS_CDHDR,
Internal Table to hold Change document items *
T_CDPOS LIKE STANDARD TABLE
OF FS_CDPOS,
Temp. Internal Table to hold Change document items *
T_CDPOS_TEMP LIKE STANDARD TABLE
OF FS_CDPOS,
Internal Table to hold Data Element Name *
T_DATAELE LIKE STANDARD TABLE
OF FS_DATAELE,
Temp. Internal Table to hold Data Element Name *
T_DATAELE_TEMP LIKE STANDARD TABLE
OF FS_DATAELE,
Internal Table to hold Short Text of the Date Element *
T_TEXT LIKE STANDARD TABLE
OF FS_TEXT,
Internal Table to hold data to be displayed on the ALV grid *
T_OUTTAB LIKE STANDARD TABLE
OF FS_OUTTAB.
C L A S S D E F I N I T I O N *
CLASS LCL_EVENT_HANDLER DEFINITION DEFERRED.
*" Data declarations...................................................
Work variables *
DATA:
W_EBELN TYPE EKKO-EBELN, " Purchasing Document Number
W_LIFNR TYPE EKKO-LIFNR, " Vendor's account number
W_EKGRP TYPE EKKO-EKGRP, " Purchasing group
W_VALUE TYPE EKKO-EBELN, " Reflected Value
W_SPACE VALUE ' ', " Space
W_FLAG TYPE I, " Flag Variable
W_VARIANT TYPE DISVARIANT, " Variant
*--- ALV Grid
W_GRID TYPE REF TO CL_GUI_ALV_GRID,
*--- Event Handler
W_EVENT_CLICK TYPE REF TO LCL_EVENT_HANDLER,
*--- Field catalog table
T_FIELDCAT TYPE LVC_T_FCAT.
AT SELECTION-SCREEN EVENT *
AT SELECTION-SCREEN ON S_EBELN.
Subroutine to validate Purchase Document Number.
PERFORM VALIDATE_PD_NUM.
AT SELECTION-SCREEN ON S_LIFNR.
Subroutine to validate Vendor Number.
PERFORM VALIDATE_VEN_NUM.
AT SELECTION-SCREEN ON S_EKGRP.
Subroutine to validate Purchase Group.
PERFORM VALIDATE_PUR_GRP.
START-OF-SELECTION EVENT *
START-OF-SELECTION.
Subroutine to select all Purchase orders.
PERFORM SELECT_PO.
CHECK W_FLAG EQ 0.
Subroutine to select Object values.
PERFORM SELECT_OBJ_ID.
CHECK W_FLAG EQ 0.
Subroutine to select Changed values.
PERFORM SELECT_CHANGED_VALUE.
CHECK W_FLAG EQ 0.
Subroutine to Select Purchase Orders.
PERFORM SELECT_PUR_DOC.
Subroutine to select Vendor Details.
PERFORM SELECT_VENDOR.
Subroutine to select Text for the Changed values.
PERFORM DESCRIPTION.
END-OF-SELECTION EVENT *
END-OF-SELECTION.
IF NOT T_EKKO IS INITIAL.
Subroutine to populate the Output Table.
PERFORM FILL_OUTTAB.
Subroutine to build Field Catalog.
PERFORM PREPARE_FIELD_CATALOG CHANGING T_FIELDCAT.
CALL SCREEN 100.
ENDIF. " IF NOT T_EKKO...
CLASS LCL_EVENT_HANDLER DEFINITION
Defining Class which handles events
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
METHODS:
HANDLE_HOTSPOT_CLICK
FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
IMPORTING E_ROW_ID E_COLUMN_ID.
ENDCLASS. " LCL_EVENT_HANDLER DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION
Implementing the Class which can handle events
CLASS LCL_EVENT_HANDLER IMPLEMENTATION .
*---Handle Double Click
METHOD HANDLE_HOTSPOT_CLICK .
Subroutine to get the HotSpot Cell information.
PERFORM GET_CELL_INFO.
SET PARAMETER ID 'BES' FIELD W_VALUE.
CALL TRANSACTION 'ME23N'.
ENDMETHOD. " HANDLE_HOTSPOT_CLICK
ENDCLASS. " LCL_EVENT_HANDLER
*& Module STATUS_0100 OUTPUT
PBO Event
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'OOPS'.
SET TITLEBAR 'TIT'.
Subroutine to fill the Variant Structure
PERFORM FILL_VARIANT.
IF W_GRID IS INITIAL.
CREATE OBJECT W_GRID
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
I_PARENT = CL_GUI_CONTAINER=>SCREEN0
I_APPL_EVENTS =
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0
CALL METHOD W_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT = W_VARIANT
I_SAVE = 'A'
I_DEFAULT = 'X'
IS_LAYOUT =
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
IT_OUTTAB = T_OUTTAB
IT_FIELDCATALOG = T_FIELDCAT
IT_SORT =
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0.
ENDIF. " IF W_GRID IS INITIAL
CREATE OBJECT W_EVENT_CLICK.
SET HANDLER W_EVENT_CLICK->HANDLE_HOTSPOT_CLICK FOR W_GRID.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
PAI Event
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'CANCEL'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form PREPARE_FIELD_CATALOG
Subroutine to build the Field catalog
<--P_T_FIELDCAT Field Catalog Table
FORM PREPARE_FIELD_CATALOG CHANGING PT_FIELDCAT TYPE LVC_T_FCAT .
DATA LS_FCAT TYPE LVC_S_FCAT.
Purchasing group...
LS_FCAT-FIELDNAME = 'EKGRP'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Number...
LS_FCAT-FIELDNAME = 'EBELN'.
LS_FCAT-REF_TABLE = 'EKKO' .
LS_FCAT-EMPHASIZE = 'C411'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-HOTSPOT = 'X'.
APPEND LS_FCAT TO PT_FIELDCAT .
CLEAR LS_FCAT .
Name of Person who Created the Object...
LS_FCAT-FIELDNAME = 'ERNAM'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-OUTPUTLEN = '15' .
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Date...
LS_FCAT-FIELDNAME = 'BEDAT'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Vendor's account number...
LS_FCAT-FIELDNAME = 'LIFNR'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Account Number of Vendor or Creditor...
LS_FCAT-FIELDNAME = 'NAME1'.
LS_FCAT-REF_TABLE = 'LFA1'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Vendor Name'(001).
LS_FCAT-SELTEXT = 'Vendor Name'(001).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Creation date of the change document...
LS_FCAT-FIELDNAME = 'UDATE'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Change Date'(002).
LS_FCAT-SELTEXT = 'Change Date'(002).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
User name of the person responsible in change document...
LS_FCAT-FIELDNAME = 'USERNAME'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Modified by'(003).
LS_FCAT-SELTEXT = 'Modified by'(003).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Short Text Describing R/3 Repository Objects...
LS_FCAT-FIELDNAME = 'DDTEXT'.
LS_FCAT-REF_TABLE = 'DD04T'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '15'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Old contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_OLD'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
New contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_NEW'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
ENDFORM. " PREPARE_FIELD_CATALOG
*& Form SELECT_PO
Subroutine to select all the Purchase Orders
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PO .
SELECT EBELN " Purchasing Document Number
ERNAM " Name of Person who Created
" the Object
LIFNR " Vendor's account number
EKGRP " Purchasing group
BEDAT " Purchasing Document Date
FROM EKKO
PACKAGE SIZE 10000
APPENDING TABLE T_EBELN
WHERE EBELN IN S_EBELN
AND BEDAT IN S_BEDAT.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S401(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDFORM. " SELECT_PO
*& Form SELECT_OBJ_ID
Subroutine to select Object ID
There are no interface parameters to be passed to this subroutine.
FORM SELECT_OBJ_ID .
IF NOT T_EBELN IS INITIAL.
SELECT OBJECTCLAS " Object Class
OBJECTID " Object value
CHANGENR " Document change number
USERNAME " User name
UDATE " Creation date
FROM CDHDR
INTO TABLE T_CDHDR
FOR ALL ENTRIES IN T_EBELN
WHERE OBJECTID EQ T_EBELN-EBELN
AND UDATE IN S_UDATE
AND TCODE IN ('ME21N','ME22N','ME23N').
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Header Not Found'(031).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EBELN IS INITIAL
ENDFORM. " SELECT_OBJ_ID
*& Form SELECT_CHANGED_VALUE
Subroutine to select Changed Values
There are no interface parameters to be passed to this subroutine.
FORM SELECT_CHANGED_VALUE .
IF NOT T_CDHDR IS INITIAL.
SELECT OBJECTCLAS " Object class
OBJECTID " Object value
CHANGENR " Document change number
TABNAME " Table Name
FNAME " Field Name
VALUE_NEW " New contents of changed field
VALUE_OLD " Old contents of changed field
FROM CDPOS
PACKAGE SIZE 10000
APPENDING TABLE T_CDPOS
FOR ALL ENTRIES IN T_CDHDR
WHERE OBJECTCLAS EQ T_CDHDR-OBJECTCLAS
AND OBJECTID EQ T_CDHDR-OBJECTID
AND CHANGENR EQ T_CDHDR-CHANGENR.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Item Not Found'(032).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_CDHDR IS INITIAL
T_CDPOS_TEMP[] = T_CDPOS[].
ENDFORM. " SELECT_CHANGED_VALUE
*& Form SELECT_PUR_DOC
Subroutine to select Purchase Order Details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PUR_DOC .
IF NOT T_CDPOS IS INITIAL.
SORT T_EBELN BY EBELN.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_EBELN INTO FS_EBELN WITH KEY EBELN =
FS_CDPOS-OBJECTID BINARY SEARCH.
IF SY-SUBRC NE 0.
DELETE TABLE T_EBELN FROM FS_EBELN.
ENDIF. " IF SY-SUBRC NE 0.
ENDLOOP. " LOOP AT T_CDPOS...
LOOP AT T_EBELN INTO FS_EBELN.
MOVE FS_EBELN-EBELN TO FS_EKKO-EBELN.
MOVE FS_EBELN-ERNAM TO FS_EKKO-ERNAM.
MOVE FS_EBELN-LIFNR TO FS_EKKO-LIFNR.
MOVE FS_EBELN-EKGRP TO FS_EKKO-EKGRP.
MOVE FS_EBELN-BEDAT TO FS_EKKO-BEDAT.
APPEND FS_EKKO TO T_EKKO.
ENDLOOP. " LOOP AT T_EBELN...
T_EKKO_TEMP[] = T_EKKO[].
ENDIF. " IF NOT T_CDPOS IS INITIAL
ENDFORM. " SELECT_PUR_DOC
*& Form SELECT_VENDOR
Subroutine to select Vendor details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_VENDOR .
IF NOT T_EKKO IS INITIAL.
SORT T_EKKO_TEMP BY LIFNR.
DELETE ADJACENT DUPLICATES FROM T_EKKO_TEMP COMPARING LIFNR.
SELECT LIFNR " Account Number of Vendor or
" Creditor
NAME1 " Name 1
FROM LFA1
INTO TABLE T_LFA1
FOR ALL ENTRIES IN T_EKKO_TEMP
WHERE LIFNR EQ T_EKKO_TEMP-LIFNR.
IF SY-SUBRC NE 0.
MESSAGE S002(M8) WITH 'Master Details'(033).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EKKO IS INITIAL
ENDFORM. " SELECT_VENDOR
*& Form DESCRIPTION
Subroutine to get the description
There are no interface parameters to be passed to this subroutine.
FORM DESCRIPTION .
IF NOT T_CDPOS IS INITIAL.
SORT T_CDPOS_TEMP BY TABNAME FNAME.
DELETE ADJACENT DUPLICATES FROM T_CDPOS_TEMP COMPARING TABNAME FNAME
SELECT TABNAME " Table Name
FIELDNAME " Field Name
ROLLNAME " Data element
FROM DD03L
INTO TABLE T_DATAELE
FOR ALL ENTRIES IN T_CDPOS_TEMP
WHERE TABNAME EQ T_CDPOS_TEMP-TABNAME
AND FIELDNAME EQ T_CDPOS_TEMP-FNAME.
IF NOT T_DATAELE IS INITIAL.
T_DATAELE_TEMP[] = T_DATAELE[].
SORT T_DATAELE_TEMP BY ROLLNAME.
DELETE ADJACENT DUPLICATES FROM T_DATAELE_TEMP COMPARING ROLLNAME.
SELECT ROLLNAME " Data element
DDTEXT " Short Text Describing R/3
" Repository Objects
FROM DD04T
INTO TABLE T_TEXT
FOR ALL ENTRIES IN T_DATAELE_TEMP
WHERE ROLLNAME EQ T_DATAELE_TEMP-ROLLNAME
AND DDLANGUAGE EQ SY-LANGU.
IF SY-SUBRC NE 0.
EXIT.
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_DATAELE IS INITIAL.
ENDIF. " IF NOT T_CDPOS IS INITIAL.
ENDFORM. " DESCRIPTION
*& Form FILL_OUTTAB
Subroutine to populate the Outtab
There are no interface parameters to be passed to this subroutine.
FORM FILL_OUTTAB .
SORT T_CDHDR BY OBJECTCLAS OBJECTID CHANGENR.
SORT T_EKKO BY EBELN.
SORT T_LFA1 BY LIFNR.
SORT T_DATAELE BY TABNAME FIELDNAME.
SORT T_TEXT BY ROLLNAME.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_CDHDR INTO FS_CDHDR WITH KEY
OBJECTCLAS = FS_CDPOS-OBJECTCLAS
OBJECTID = FS_CDPOS-OBJECTID
CHANGENR = FS_CDPOS-CHANGENR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_CDHDR-USERNAME TO FS_OUTTAB-USERNAME.
MOVE FS_CDHDR-UDATE TO FS_OUTTAB-UDATE.
READ TABLE T_EKKO INTO FS_EKKO WITH KEY
EBELN = FS_CDHDR-OBJECTID
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_EKKO-EBELN TO FS_OUTTAB-EBELN.
MOVE FS_EKKO-ERNAM TO FS_OUTTAB-ERNAM.
MOVE FS_EKKO-LIFNR TO FS_OUTTAB-LIFNR.
MOVE FS_EKKO-EKGRP TO FS_OUTTAB-EKGRP.
MOVE FS_EKKO-BEDAT TO FS_OUTTAB-BEDAT.
READ TABLE T_LFA1 INTO FS_LFA1 WITH KEY
LIFNR = FS_EKKO-LIFNR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_LFA1-NAME1 TO FS_OUTTAB-NAME1.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
MOVE FS_CDPOS-VALUE_NEW TO FS_OUTTAB-VALUE_NEW.
MOVE FS_CDPOS-VALUE_OLD TO FS_OUTTAB-VALUE_OLD.
READ TABLE T_DATAELE INTO FS_DATAELE WITH KEY
TABNAME = FS_CDPOS-TABNAME
FIELDNAME = FS_CDPOS-FNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
READ TABLE T_TEXT INTO FS_TEXT WITH KEY
ROLLNAME = FS_DATAELE-ROLLNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_TEXT-DDTEXT TO FS_OUTTAB-DDTEXT.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
APPEND FS_OUTTAB TO T_OUTTAB.
CLEAR FS_OUTTAB.
ENDLOOP.
ENDFORM. " FILL_OUTTAB
*& Form GET_CELL_INFO
Subroutine to get the Cell Information
--> W_VALUE Holds the value of Hotspot clicked
FORM GET_CELL_INFO .
CALL METHOD W_GRID->GET_CURRENT_CELL
IMPORTING
E_ROW =
E_VALUE = W_VALUE
E_COL =
ES_ROW_ID =
ES_COL_ID =
ES_ROW_NO =
ENDFORM. " GET_CELL_INFO
*& Form VALIDATE_PD_NUM
Subroutine to validate Purchase Document Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PD_NUM .
IF NOT S_EBELN[] IS INITIAL.
SELECT EBELN " Purchase Document Number
FROM EKKO
INTO W_EBELN
UP TO 1 ROWS
WHERE EBELN IN S_EBELN.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E717(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EBELN[]...
ENDFORM. " VALIDATE_PD_NUM
*& Form VALIDATE_VEN_NUM
Subroutine to validate Vendor Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_VEN_NUM .
IF NOT S_LIFNR[] IS INITIAL.
SELECT LIFNR " Vendor Number
FROM LFA1
INTO W_LIFNR
UP TO 1 ROWS
WHERE LIFNR IN S_LIFNR.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E002(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_LIFNR[]...
ENDFORM. " VALIDATE_VEN_NUM
*& Form VALIDATE_PUR_GRP
Subroutine to validate the Purchase Group
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PUR_GRP .
IF NOT S_EKGRP[] IS INITIAL.
SELECT EKGRP " Purchase Group
FROM T024
INTO W_EKGRP
UP TO 1 ROWS
WHERE EKGRP IN S_EKGRP.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E622(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EKFRP[]...
ENDFORM. " VALIDATE_PUR_GRP
*& Form FILL_VARIANT
Subroutine to fill the Variant Structure
There are no interface parameters to be passed to this subroutine
FORM FILL_VARIANT .
Filling the Variant structure
W_VARIANT-REPORT = SY-REPID.
W_VARIANT-USERNAME = SY-UNAME.
ENDFORM. " FILL_VARIANT
reward point if helpful.
thanks
mrutyun^

What are the transactions we use day to day in the bw before go live

what are the transactions we use most in the bw before go live?
Tcodes for backend objects like creating infocube and so on.
Tcodes for front end objects like creating queries and so on.
Thank you.
York

Hi Les,
check previous posting
Transaction Codes for BW Developers
SAP BW n R/3 transactions.
table TSTCT contains all the transaction codes
RSA6 Maintain DataSources
RSA7 BW Delta Queue Monitor
RSA8 DataSource Repository
RSA9 Transfer Application Components
RSD1 Characteristic maintenance
RSD2 Maintenance of key figures
RSD3 Maintenance of units
RSD4 Maintenance of time characteristics
RSDBC DB connect
RSDDV Maintaining Aggregates
RSIMPCUR Load Exchange Rates from File
RSISET Maintain InfoSets
RSKC Maintaining the Permittd Extra Chars
RSLGMP Maintain RSLOGSYSMAP
RSMO Data Load Monitor Start
RSMON BW Administrator Workbench
RSOR BW Metadata Repository
RSORBCT BI Business Content Transfer
RSORMDR BW Metadata Repository
RSPC Process Chain Maintenance
RSPC1 Process Chain Display
RSPCM Monitor daily process chains
RSRCACHE OLAP: Cache Monitor
RSRT Start of the report monitor
RSRT1 Start of the Report Monitor
RSRT2 Start of the Report Monitor
RSRTRACE Set trace configuration
RSRTRACETEST Trace tool configuration
RSRV Analysis and Repair of BW Objects
SE03 Transport Organizer Tools
SE06 Set Up Transport Organizer
SE07 CTS Status Display
SE09 Transport Organizer
SE10 Transport Organizer
SE11 ABAP Dictionary
SE24 Class Builder
SE80 Object Navigator
RSCUSTA Maintain BW Settings
RSCUSTA2 ODS Settings
RSCUSTV*
RSSM Authorizations for Reporting
SM04 User List
SM12 Display and Delete Locks
SM21 Online System Log Analysis
SM37 Overview of job selection
SM50 Work Process Overview
SM51 List of SAP Systems
SM58 Asynchronous RFC Error Log
SM59 RFC Destinations (Display/Maintain)
LISTCUBE List viewer for InfoCubes
LISTSCHEMA Show InfoCube schema
DB02 Tables and Indexes Monitor
DB14 Display DBA Operation Logs
DB16 Display DB Check Results
DB20 Update DB Statistics
r/3 (bw related)
SBIW BIW in IMG for OLTP
BD61 Activate Change Pointers - Generally
BDLS Convert Logical System Names
BF11 Application Areas
RSA2 OLTP Metadata Repository
RSA3 Extractor Checker
RSA5 Install Business Content
RSA6 Maintain DataSources
RSA7 BW Delta Queue Monitor
RSA8 DataSource Repository
RSA9 Transfer Application Components
RSO2 Oltp Metadata Repository
RSO3 Set Up Deltas for Master Data
LO setup table
OLI1BW INVCO Stat. Setup: Material Movemts
OLI2BW INVCO Stat. Setup: Stor. Loc. Stocks
OLI3BW Reorg.PURCHIS BW Extract Structures
OLI4BW Reorg. PPIS Extract Structures
OLI7BW Reorg. of VIS Extr. Struct.: Order
OLI8BW Reorg. VIS Extr. Str.: Delivery
OLI9BW Reorg. VIS Extr. Str.: Invoices
OLIABW Setup: BW agency business
OLIFBW Reorg. Rep. Manuf. Extr. Structs
OLIIBW Reorg. of PM Info System for BW
OLIQBW QM Infosystem Reorganization for BW
OLISBW Reorg. of CS Info System for BW
OLIZBW INVCO Setup: Invoice Verification
Check out AHP's reply specifically in the link:
urgent
Assign Points if Helpful *****
Regards,
Ravikanth

Wiki or Robohelp - What are the benefits of using a wiki vs publishing projects in robohelp?

What are the benefits of using a wiki vs publishing projects in robohelp? I currently use RH9/RH9 Server and publish multiple SSL. The company is looking to stop using Robohelp and replace our online help authoring tool (RH) with a wiki. Are there any benefits of going to a wiki environment. What RH features/functions that I have today will i not have by having IT import our robohelp files into a wiki?
I know that a wiki is not an authoring tool, but someone must think it is and we'll still have all the functionality of publishing multiple SSLs, reports, etc once in the wiki environment. Any comments - is this the best route?

Hi,
There are many differences. The idea of a wiki is to allow anyone to view and/or edit the content. Depending on the wiki system, you can set access control for viewing and editing.
Wiki's typically have simple syntax (html in a wiki is a serious security risk), allow image embedding, links and attachments. You will need to learn the specific syntax (rather easy, but also very limited).
What will you lose? This depends on the features available in the wiki system as well as the available plugins. A few downsides:
- WYSIWYG editor limited, if at all.
- No snippets
- No variables
- Dropdowns (may be possible through plugins)
- Index
- Styling based on css classes (mostly supported through HTML which is a security concern)
- Only one version of your support system: multiple versions require multiple installations/configurations.
- No searching in attachments.
- No CBT (Though some wiki's allow comments in the wiki code)
- No Word/FrameMaker import.
- You have to create your own CSH calls.
On the upside:
- Most wiki systems are free, even for commercial use.
- The syntax is quite simple, allowing you to quickly write text.
- Wiki's typically offer good support for syntax highlighting.
- They are very easy to set up.
- Most wiki's have plugins to enable comments.
The greatest downside in my opinion is that you always have the latest version of all files. Whenever you update a page, everyone immediately has the latest version. And if you want to create help for a feature that isn't released yet, you will have to use access control to make sure not everyone sees the (unfinished) help for the unreleased feature. With RoboHelp you have a single source that creates a one way output.
We use both RoboHelp and wiki's: RoboHelp for customer help and wiki internally to share knowledge. And sharing knowledge is what wiki's are designed for.
Greet,
Willam

What are the function modules used in interactive ALV and parameters?

what are the function modules used in interactive ALV and parameters?

hi sunil
check these links,
About ALV:
http://www.geocities.com/mpioud/Abap_programs.html
ALV Group Heading
http://www.sap-img.com/fu037.htm
and few more,
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
also run the folowing code and see
check this sample code.you will be well versed with all the events of a interactive alv report.mark points if useful.
*& Report ZALV4_INTERACTIVE *
*& interactive alvs *
REPORT ZALV4_INTERACTIVE NO STANDARD PAGE HEADING
MESSAGE-ID ZMSG
LINE-COUNT 37(3)
LINE-SIZE 134.
TYPE-POOLS : SLIS.
TABLES DECLARATION ********************
TABLES : VBRK, " BILLING MASTERS TABLE
VBRP. " BILLING ITEM TABLE
TYPES DECLARATION ********************
TYPES : BEGIN OF TY_VBRK, " types for billing masters table
VBELN TYPE VBRK-VBELN, " billing document
WAERK TYPE VBRK-WAERK, " document currency
VKORG TYPE VBRK-VKORG, " sales organization
FKDAT TYPE VBRK-FKDAT, " billing date
BUKRS TYPE VBRK-BUKRS, " company code
BUTXT TYPE T001-BUTXT, " company name
NETWR TYPE VBRK-NETWR, " net currency value
LINE_COLOR(4) TYPE C,
END OF TY_VBRK.
TYPES : BEGIN OF TY_VBRP, " types for billing document item data
POSNR TYPE VBRP-POSNR, " billing item
FKIMG TYPE VBRP-FKIMG, " actual invoiced quantitty
VRKME TYPE VBRP-VRKME, " sales unit
NETWR TYPE VBRP-NETWR, " net currency value
MATNR TYPE VBRP-MATNR, " material number
ARKTX TYPE VBRP-ARKTX, " short text for sales order item
END OF TY_VBRP.
FIELD CATALOG ********************
DATA : WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
WA_FIELDCAT1 TYPE SLIS_FIELDCAT_ALV.
LAYOUT DECLARATION ********************
DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV,
WA_LAYOUT1 TYPE SLIS_LAYOUT_ALV.
EVENTS DECLARATION ********************
DATA : TY_EVENTS TYPE SLIS_ALV_EVENT,
IT_EVENTS TYPE SLIS_T_EVENT.
PF STATUS ********************
DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
USER COMMAND ********************
DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
R_UCOMM LIKE SY-UCOMM.
INTERNAL TABLES ********************
DATA : IT_VBRK TYPE TABLE OF TY_VBRK, "internal table for billing master
IT_VBRP TYPE TABLE OF TY_VBRP, "internal table for billing item
*internal table for field catalog
IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
IT_FIELDCAT1 TYPE SLIS_T_FIELDCAT_ALV.
WORK AREA ********************
DATA : WA_VBRK LIKE LINE OF IT_VBRK, "work area for billing master
WA_VBRP LIKE LINE OF IT_VBRP. "work area for billing item
VARIABLE DECLARATION ********************
DATA : V_DATE TYPE SY-DATUM, " variable to store date values
V_VBELN TYPE VBRK-VBELN, " variable for billing document
V_FKDAT TYPE VBRK-FKDAT, " variable for billing date
V_FLAG(1). " variable for flag
SELECTION SCREEN ********************
SELECT-OPTIONS : S_VBELN FOR VBRK-VBELN , " Billing document
S_FKDAT FOR VBRK-FKDAT, " Billing date
S_MATNR FOR VBRP-MATNR. " Material number
PARAMETERS : R1 RADIOBUTTON GROUP G1, "whole item details
R2 RADIOBUTTON GROUP G1. "selected item details
INITIALIZATION ********************
INITIALIZATION.
V_FLAG = 'X'.
V_DATE = SY-DATUM - 20.
S_FKDAT-SIGN = 'I'.
S_FKDAT-OPTION = 'EQ'.
S_FKDAT-LOW = V_DATE.
S_FKDAT-HIGH = SY-DATUM.
APPEND S_FKDAT.
SELECTION SCREEN VALIDATION ********************
AT SELECTION-SCREEN.
PERFORM CONVERSION. " performs data conversion for input
PERFORM VBELN_VALIDATE. " validating the billing document
PERFORM FKDAT_VALIDATE. " validating the billing date
START OF SELECTION ********************
START-OF-SELECTION.
SET TITLEBAR 'AAAA'.
PERFORM VBRK_POPULATE. " populating the billing master detais
PERFORM FIELDCATALOG. " designing the field catalog
PERFORM EVENTS. " performing the events for top of page
PERFORM DISP_BASICLIST." displaying the basic list
*& Form VBELN_VALIDATE
text validating the billing document
--> p1 text
<-- p2 text
FORM VBELN_VALIDATE .
IF S_VBELN IS INITIAL.
MESSAGE E000 WITH 'Make entries in all required fields'.
ELSE.
SELECT SINGLE VBELN
FROM VBRK
INTO V_VBELN
WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
MESSAGE I000 WITH 'BILLING DOCUMENT DOESNT EXIST'.
ENDIF.
ENDIF.
ENDFORM. " VBELN_VALIDATE
*& Form FKDAT_VALIDATE
text validating the billing date
--> p1 text
<-- p2 text
FORM FKDAT_VALIDATE .
SELECT SINGLE FKDAT
FROM VBRK
INTO V_FKDAT
WHERE FKDAT IN S_FKDAT.
IF SY-SUBRC <> 0.
MESSAGE I000 WITH 'BILLING DATE DOESNT EXIST'.
ENDIF.
ENDFORM. " FKDAT_VALIDATE
*& Form VBRK_POPULATE
text populating the billing master details
--> p1 text
<-- p2 text
FORM VBRK_POPULATE .
DATA : LD_COLOR(1) TYPE C.
LD_COLOR = 5.
SELECT VBRK~VBELN
VBRK~WAERK
VBRK~VKORG
VBRK~FKDAT
VBRK~BUKRS
VBRK~NETWR
T001~BUTXT
FROM VBRK INNER JOIN T001
ON VBRKBUKRS = T001BUKRS
INTO CORRESPONDING FIELDS OF TABLE IT_VBRK
WHERE VBRK~VBELN IN S_VBELN AND
VBRK~FKDAT IN S_FKDAT.
LOOP AT IT_VBRK INTO WA_VBRK.
LD_COLOR = LD_COLOR + 1.
IF LD_COLOR = 8.
LD_COLOR = 1.
ENDIF.
CONCATENATE 'C' LD_COLOR '10' INTO WA_VBRK-LINE_COLOR.
MODIFY IT_VBRK FROM WA_VBRK.
ENDLOOP.
ENDFORM. " VBRK_POPULATE
*& Form CONVERSION
text data conversion to take leading zeroes into account
--> p1 text
<-- p2 text
FORM CONVERSION .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = S_VBELN
IMPORTING
OUTPUT = S_VBELN.
ENDFORM. " CONVERSION
*& Form DISP_BASICLIST
text displaying the basic list
--> p1 text
<-- p2 text
FORM DISP_BASICLIST .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = PF_STATUS
I_CALLBACK_USER_COMMAND = USER_COMMAND
I_STRUCTURE_NAME =
IS_LAYOUT = WA_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = 'X'
IS_VARIANT =
IT_EVENTS = IT_EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_VBRK
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISP_BASICLIST
*& Form FIELDCATALOG
text designing the field catalog
--> p1 text
<-- p2 text
FORM FIELDCATALOG .
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-SELTEXT_L = 'BILLING DOCUMENT'.
WA_FIELDCAT-COL_POS = 1.
WA_FIELDCAT-EMPHASIZE = 'C610'.
WA_FIELDCAT-KEY = 'X'.
WA_FIELDCAT-OUTPUTLEN = 20.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'WAERK'.
WA_FIELDCAT-SELTEXT_L = 'DOCUMENT CURRENCY'.
WA_FIELDCAT-COL_POS = 2.
WA_FIELDCAT-OUTPUTLEN = 20.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'VKORG'.
WA_FIELDCAT-SELTEXT_L = 'SALES ORGANIZATION'.
WA_FIELDCAT-EMPHASIZE = 'C610'.
WA_FIELDCAT-COL_POS = 3.
WA_FIELDCAT-OUTPUTLEN = 20.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'FKDAT'.
WA_FIELDCAT-SELTEXT_L = 'BILLING DATE'.
WA_FIELDCAT-COL_POS = 4.
WA_FIELDCAT-OUTPUTLEN = 20.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_L = 'COMPANY CODE'.
WA_FIELDCAT-COL_POS = 5.
WA_FIELDCAT-OUTPUTLEN = 20.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'BUTXT'.
WA_FIELDCAT-SELTEXT_L = 'COMPANY NAME'.
WA_FIELDCAT-COL_POS = 6.
WA_FIELDCAT-OUTPUTLEN = 25.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'NETWR'.
WA_FIELDCAT-SELTEXT_L = 'NET CURRENCY VALUE'.
WA_FIELDCAT-COL_POS = 7.
WA_FIELDCAT-OUTPUTLEN = 20.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_LAYOUT-ZEBRA = 'X'.
WA_LAYOUT-INFO_FIELDNAME = 'LINE_COLOR'.
ENDFORM. " FIELDCATALOG
*& Form SET_PF_STATUS
text set the pf status
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'Z50658_PFSTATUS' EXCLUDING EXTAB.
ENDFORM. "SET_PF_STATUS
*& Form SET_USER_COMMAND
text set the user command
FORM SET_USER_COMMAND USING R_UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN 'CLICK'.
IF R1 = 'X'.
IF NOT IT_VBRK IS INITIAL.
SELECT POSNR
FKIMG
VRKME
NETWR
MATNR
ARKTX
FROM VBRP
INTO CORRESPONDING FIELDS OF TABLE IT_VBRP
FOR ALL ENTRIES IN IT_VBRK
WHERE VBELN = IT_VBRK-VBELN.
IF SY-SUBRC <> 0.
MESSAGE I000 WITH ' NO BILLING DETAILS FOUND'.
ELSE.
IF V_FLAG = 'X'.
PERFORM DET_FIELDCATALOG.
V_FLAG = ''.
ENDIF.
PERFORM DET_LISTDISPLAY.
ENDIF.
ENDIF.
ENDIF.
IF R2 = 'X'.
READ TABLE IT_VBRK INTO WA_VBRK INDEX RS_SELFIELD-TABINDEX.
IF SY-SUBRC = 0.
SELECT SINGLE POSNR
FKIMG
VRKME
NETWR
MATNR
ARKTX
FROM VBRP
INTO CORRESPONDING FIELDS OF WA_VBRP
WHERE VBELN = WA_VBRK-VBELN.
ENDIF.
APPEND WA_VBRP TO IT_VBRP.
ENDIF.
IF V_FLAG = 'X'.
PERFORM DET_FIELDCATALOG. "designing the field catalog for items
V_FLAG = ''.
ENDIF.
PERFORM DET_LISTDISPLAY. "displaying the secondary list
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'UP'.
LEAVE TO SCREEN 0.
WHEN 'CANCEL'.
CALL TRANSACTION 'SE38'.
ENDCASE.
ENDFORM. "SET_USER_COMMAND
*& Form DET_FIELDCATALOG
text designing the field catalog for item details
--> p1 text
<-- p2 text
FORM DET_FIELDCATALOG .
WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
WA_FIELDCAT1-FIELDNAME = 'POSNR'.
WA_FIELDCAT1-SELTEXT_L = 'BILLING ITEM'.
WA_FIELDCAT1-COL_POS = 1.
WA_FIELDCAT1-OUTPUTLEN = 20.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
WA_FIELDCAT1-FIELDNAME = 'FKIMG'.
WA_FIELDCAT1-SELTEXT_L = 'INVOICE QUANTITY'.
WA_FIELDCAT1-COL_POS = 2.
WA_FIELDCAT1-OUTPUTLEN = 20.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
WA_FIELDCAT1-FIELDNAME = 'VRKME'.
WA_FIELDCAT1-SELTEXT_L = 'SALES UNIT'.
WA_FIELDCAT1-COL_POS = 3.
WA_FIELDCAT1-OUTPUTLEN = 20.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
WA_FIELDCAT1-FIELDNAME = 'NETWR'.
WA_FIELDCAT1-SELTEXT_L = 'NET CURRENCY VALUE'.
WA_FIELDCAT1-COL_POS = 4.
WA_FIELDCAT1-OUTPUTLEN = 20.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
WA_FIELDCAT1-FIELDNAME = 'MATNR'.
WA_FIELDCAT1-SELTEXT_L = 'MATERIAL NUMBER'.
WA_FIELDCAT1-COL_POS = 5.
WA_FIELDCAT1-OUTPUTLEN = 20.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
WA_FIELDCAT1-FIELDNAME = 'ARKTX'.
WA_FIELDCAT1-SELTEXT_L = 'SALES ORDER ITEM'.
WA_FIELDCAT1-COL_POS = 6.
WA_FIELDCAT1-OUTPUTLEN = 20.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
WA_LAYOUT1-ZEBRA = 'X'.
ENDFORM. " DET_FIELDCATALOG
*& Form DET_LISTDISPLAY
text displaying the secondary list
--> p1 text
<-- p2 text
FORM DET_LISTDISPLAY .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME =
IS_LAYOUT = WA_LAYOUT1
IT_FIELDCAT = IT_FIELDCAT1
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = IT_EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_VBRP
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR IT_VBRP[].
ENDFORM. " DET_LISTDISPLAY
*& Form EVENTS
text
--> p1 text
<-- p2 text
FORM EVENTS .
CLEAR TY_EVENTS.
TY_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
TY_EVENTS-FORM = 'TOP_OF_PAGE'.
APPEND TY_EVENTS TO IT_EVENTS.
ENDFORM. " EVENTS
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
SKIP.
ULINE.
WRITE :/2 ' DATE :', SY-DATUM,
45 'INTELLIGROUP ASIA PVT LTD',
110 'TIME :', SY-UZEIT.
WRITE : /3 'USER :', SY-UNAME,
45 'TITLE :', SY-TITLE,
110 'PAGE :', SY-PAGNO.
ULINE.
SKIP.
ENDFORM. "TOP_OF_PAGE
Cheers
navjot
Reward with points if it is helpful
Message was edited by:
navjot sharma

What are the key fields used to group double orders in t-code SDD1?

What are the key fields used to group double orders in t-code SDD1?
Cheers,
VT

Hi,
You can group the duplicate sales documents with the help of the following fields,
Sold-To-Party,Document type,date and sales area details.
Regards,
Gopal.

What are the advantage of using a passive monitoring technique ?

What are the advantage of using a passive monitoring technique

Hi Plawansai,
I saw your question that is still unanswered.
I believe an advantage of using a passive monitoring technique is that it won't interfer with live traffic, as it does not inject traffic into the network or modify the traffic that is already on the network.
One drawback anyway, is that post-processing time can take a large amount of time with passive monitoring!
A combination of the two monitoring methods seems to be the route to go.
V.

What are the implications of using jquery version 1.10.2 rather than the version (1.7.1) that Adobe

What are the implications of using jquery version 1.10.2 rather than the version (1.7.1) that Adobe uses? Thanks
Bob

I am having trouble when my Edge Animate composition (banner ad) appears on a web page that uses jquery version 1.8.23. Some of the functionality of the host page no longer works. This occurs only when my composition is present & the functionality returns when another ad is displayed (either a Flash ad or a gif). It happens in Chrome Version 31.0.1650.63 m, Chrome Version 33.0.1738.0 canary & IE 11.
I had edited my Edge Animate files to use the Adobe CDN option & to point to another server (mine) so only the html file was needed to be placed in the ad rotator & on the host's server. I now have edited them again to include the Google CDN locations for version jquery 1.10.2 (http://ajax.googleapis.com/ajax/libs/jquery/1.10.2/jquery.min.js). I am waiting for the host site to try this updated html file. When I visit just this new page & the old one that pointed to 1.7.1 for that matter, it works fine.
Thank you for taking the time to read and answer my message.
Bob

What are the data targets for 0EC_PCA_1 and 0EC_PCA_3?

Hi,
I am looking at help.sap.com but not able to find out the data flow from these two datasources.
0EC_PCA_1 (Profit Center Accounting - transaction data) and 0EC_PCA_3 (Profit Center Accounting - Line Item).
What are the data targets and further flow for these data sources?
Thanks,
Akshara

Hi,
Data source - 0EC_PCA_1 and cube - 0PCA_C01
Data source - 0EC_PCA_3 and Cube - 0PCA_C01.
you can use same cube for two data sources.
Standard multi providers - 0PCA_MP01 and 0PCA_MC01.
Thanks

What is an ageing report? What are the data sources used to develop an agin

Similar Messages

Maybe you are looking for