What is an anchor target?

So I was going through the description of the 'left' property of the Rect class, on the adobe website. Here's the description:
"The horizontal distance in pixels from the left edge of the component to the anchor target's left edge."
Now I'm trying to apply the skin that I have defined in a separate mxml file under the skin package, to a checkbox object. So as per my understanding, the component here is the checkbox, because that is what i will be applying the skin to. Then what exactly is the anchor target? Is it the parent container?
Thanks

misterbill99 wrote:
mmfernandes wrote:
What is an ONT? 
The ONT is the box where the fiber goes into in your house. It is typically in your garage or someplace like a laundry room. It also has the battery backup.
Lots of models  of the ont's.  Always where the fiber is converted to TV/moca/ethernet.  But sometimes outside.  And often the Battery/BPS are seperate.

Similar Messages

  • What are the data targets for 0EC_PCA_1 and 0EC_PCA_3?

    Hi,
    I am looking at help.sap.com but not able to find out the data flow from these two datasources.
    0EC_PCA_1 (Profit Center Accounting - transaction data) and 0EC_PCA_3 (Profit Center Accounting - Line Item).
    What are the data targets and further flow for these data sources?
    Thanks,
    Akshara

    Hi,
    Data source  - 0EC_PCA_1 and cube - 0PCA_C01
    Data source - 0EC_PCA_3 and Cube - 0PCA_C01.
    you can use same cube for two data sources.
    Standard multi providers - 0PCA_MP01 and 0PCA_MC01.
    Thanks

  • What type of Data target is used when the safety interval is used?

    Hi ,
    what type of Data target is used when the safety interval is used in generic delta in datasource?DSO or cube  or cube?
    Pls explain me ?
    Thanks,
    Nimai

    It's up to your reporting requirement to go for dso or cube..
    I prefer to having staging with DSO and then further reporting on Cube ..
    It's always easier to manage when you have any changes to the cube .. you need not to extract data from R/3 .. if you have dso you can extract directly to cube
    Another thing is -for any reason some of your records got corrupted so you can have full loads to dso which has the overwrite functionality...  and sends delta records to cube. even in cube you can do selective deletion but we have to very careful to avoid double records in next loads
    Edited by: Srinivas on Jul 29, 2010 8:23 PM

  • What are the data target administration tasks?

    What are the data target administration tasks?

    Hi,
    Check this:-------
    Urgent: Relevant Master Data Data Sources for FI-GL  & FI-AP
    http://help.sap.com/saphelp_nw04/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
    Regards,
    Suman
    Edited by: Suman Chakravarthy on Sep 28, 2011 7:33 AM

  • Thoughts on what cards I should target next

    I am trying to decide which cards I should target next. My goal is building up a point balance for a trip to Japan or maybe Brazil. I have four new accounts from Jan which are over six months old now and a prestige card that I picked up two months ago. I can do personal or business cards. Where should be my main focus if I am looking for premium redemptions. RIght now I have about 90k TY points coming in so I was looking into maybe workijng towards signapore airlines, because I can use TY points and amex MRs with their program and redeem for a suite. Normally I would look for AA redemptions but I only have like 14k AA miles in my account and don't think I will be able to build the account back up  that quickly. I have abut 44k amex MRs saved up at moment. Some thoughts on what I might do. I am considering going for the citi premier card for the signup offer since I already have the prestige and I could use that card for travel bonus spend (if I did this then I would have 140k TY points to use). I could pick up the chase co-branded marriott card to redeem for some marriott stays, although I want to go for the ink plus when they have a good signup offer so I'm trying to avoid more chase apps. For amex I was looking at maybe a personal plat or a business plat/prg. None of the signups at the moment look super appealing and I am not getting the great signup offer via cardmatch for the plat. I have a number of URs saved up already but I am trying to save those for hyatt redemptions vs using them on airfare. Which card offers would you suggest I target and which cards should I focus my spend on? I was thinkg about going hard on the Everyday card to try to get my MR account up. .  I currently have venture, cs, citi aa plat, citi prestige, amex everyday, amex spg, ink bold, arrival+, citi hilton, chase hyatt, freedomI got rid of or downgraded the following: csp, amex prg, Citi AA exec

    JustMe3 wrote:
    red259 wrote:
    On second thought it looks like getting the Ink Plus may be harder than I thought. I got notified today that they are changing the bold card over to a revolver basically. They said there will be a set limit and I have option to pay over time with interest. This seems like it will make it very difficult for me to convince chase that I need the ink plus when I already have the bold.Well not necessarily, I'm sure there are others out there that have 2 Chase business cards and didn't have to do any convincing (although I could be wrong). Maybe you should just try for the Ink Plus now if that's the card you really want?Because they have had much higher signup offers in the past. Don't want to app for a 50k offer when I have seen 70k offers in the past and sometimes the higher offers occur around the end of summer. No way to predict for sure, but being its that time of year makes it worth waiting a month or two. 

  • Source patching and track targeting, What is it mainly used for?

    Im reading adobe premier pro cc in a classroom book, and I still dont understand what source track and target track mean, or atleast what they are mainly used for.
    Why do people use it?
    In what work scenario is it mainly used in?

    ShooterNZ is right as far as Source Patching. It's intended chiefly for controlling which track(s) a clip lands on when inserted via shortcut, although it also affects behavior when dragging content to the timelines.
    Track targetting controls the Timeline's behavior for a variety of editing and selection actions. For example, the shortcut D selects one or more clips at the playhead. Try parking the playhead over two or more clips stacked in the Timeline, then target various combinations of tracks and see what happens when you press "D."

  • What is target qty in process /production orders?

    Hi Experts,
    I am doing a report that needs to display the quantity and costs (target / planned / actual) of each component in the process /production orders. Through tcode COR3 --> given a process order# --> Goto -- > Costs, I can see total target qty / total planned qty / total actual qty for each component. But I can only find planned qty and actual qty from tables COSS, COSP, RESB.  Where to get target qty ?
    Can anybody explain to me what is exactly the target qty? Any tables to get target qty? Or any FM to get target qty?
    Thanks a lot.
    Yu

    Dear,
    Definition: target costs                                                                               
    Product Cost Controlling (CO-PC)                                                                               
    The costs expected to be incurred when a specific quantity is produced.                                                                               
    In Cost Object Controlling, the target costs are calculated on the basis 
        of the planned values of a service unit (such as the planned cost of a   
        production order) and the control quantities (such as the yield          
        delivered to stock).                                                                               
    Target costs can be used for purposes such as:                                                                               
    o   To determine variances                                                                               
    o   To valuate work in process                                                                               
    Total Target Costs                                                                               
    Total value of the target costs.                                                                               
    Calculated with the following formula:                                                                               
    Total target costs = Target cost debit + Target cost credit.                                                                               
    Use                                                                               
    Target costs are the planned costs adjusted to the actual operating    
        rate.                                                                               
    The target debit on a manufacturing order is the sum of the            
        activity-independent planned debit of the order and the                
        activity-dependent planned debit of the order multiplied by the actual 
        quantity of the order.                                                                               
    The target credit of a manufacturing order results from the goods      
        receipt postings to stock. The delivered actual quantity is valuated   
        with the planned price according to the price control.                                                                               
    The total value of the target costs is the sum of the target debit and  
        the target credit.                                                                               
    The target costs are calculated during variance calculation and updated 
        to the database.                                                                               
    The target costs cannot be shown until you have performed variance      
        calculation for this target cost version. The target credit for the     
        calculation of the total variances and production variances cannot be   
        calculated until an actual quantity for an order exists after a goods   
        receipt posting.                                                                               
    For the calculation of variances, the target costs are compared with the
        control costs.                                                                               
    Dependencies                                                                               
    The calculation of target costs depends on the selected target cost     
        version.

  • Need table name where i can find all infopackages and what are data targets

    Hi Guys,
    Could you tell me the table name in SAP BW, where i can find what are the data targets in Info Package.
    I need to do this job for 200 infopackages.
    Thanks in advance.

    Hi
    I had similiar problem.
    Look at RSLDPSEl-selupdic.
    THX
    Adam

  • FAQ: Are there rules for what you can access or target with interactions?

    Here are rules for what you can access/target for interactions:
    1. You can always target any page/state of your main application
    2. You can target the current component (the one you are editing in Edit-In-Place)
    3. You can target any component instances in the current component. If your current component contains 2 custom components, then you can target either.
    Keep in mind, transitions in Catalyst can only exist between different states of the same component.
    Answered by: Bear Travis
    See full discussion thread, including examples.

    KCvolunteer07 wrote:
    I have a lot of code that doesn't need to be checked for errors, so I don't know if I should pull that code out and do multiple try catch statements or just leave it like this...if this makes sense for the program logic you are going for then yes it is ok. I would say though the there should only be one try-catch block per thrower because theoretically each exception thrown has a different meaning for what your program should do in response.

  • What is an ageing report? What are the data sources used to develop an agin

    Hello BW gurus,
    I was going thru some of the BW resumes. I could not understand some of the points mentioned below. Kindly go thru them and please explain each of it.
    Thank you.
    TR.
    •     Developed AR ageing report, created invoice layout and processed invoices.
    What is an ageing report? What are the data sources used to develop an aging report
    •     Worked on month-end and year end processes such as Balance Sheet Statements and Profit and Loss Accounts. 
    What data sources does one use to get Balance sheet and P&L accounts tables and fields.
    •     Involved in the end to end implementation of BW at Reliance Group as a team member.
    What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or
    a full life cycle project?
    •     Extensively worked on BW Statistics to optimize the performance of Info Cubes and to create Aggregates.
    What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes.
    What are aggregates why do you need them?
    •     Prepared design documents from the Business Requirement documents and identified the
    relevant data targets for satisfying the customer requirements.
    What are the design documents does one prepare, please give an example. 
    Is cube a data target?

    What is an ageing report? What are the data sources used to develop an aging report
    Aging refers to values in different time period ranges. Example, the customer (credit) aging report can look like this.
    customer (credit)  for current period, 0 to 30 days, 30 to 90 days, 90 to 120 days. This is the way aging is classified.
    What data sources does one use to get Balance sheet and P&L accounts tables and fields.
    For P&L information, you may use 0FI_GL_6 datasource (or 0FI_GL_10 if you use ERP 5.0 version). This datasource reads the same information used in R/3 transaction f.01 (table glt0).
    What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or a full life cycle project?
    Requirement gathering, blueprint creation, development etc
    Refer to posts on Sap Methodology  and Sap lifecyle
    What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes. What are aggregates why do you need them?
    Please check these links
    http://help.sap.com/saphelp_nw04/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/f0/3c8c3bc6b84239e10000000a114084/plain.htm
    What are the design documents does one prepare, please give an example.
    Design document is basically a document to say  how the design is to be developed for a particular solution ex: FI it says what is the data fow and what are the data targets  to be used and how data shld be stored  for providing the client a solution they need.
    Is cube a data target?
    Yes cube is a data target.
    Hope this Helps
    Anand Raj

  • Targetting a div on a page from an .swf file

    Imagine I have an swf file on an html page.   Beneath it I have a div called "container".  I would like to hit a button in the flash file and have the contents of the container div change.  I've done a similar thing with frames or iframes in the past, but I'm thinking there is a way to tell flash what div I am targetting.  I would love to see the answer in AS3 since I'm trying to get myself away from many years of using AS2. 
    Thanks!

    use javascript to change your div contents and the flash externalinterface class to communicate between actionscript and javscript.

  • Error message: Page Anchor not found: 188 when exporting to ePub

    I have been working on exporting a book from InDesign CC 2014 to reflowable ePub format. The book is about 250 pages long with numerous photographs, all of which are anchored objects. I am now able to export a good-looking ePub file, but I keep getting just this one error message, Page Anchor not found: 188, followed by the pathname for the file.  I don't see a problem at page 188, but I'm not very experienced with InDesign.  I have done several searches, and I'm not sure exactly what a "page anchor" is. Can anyone help me figure this out?  Can I just ignore this error.  Thanks.

    I had similar problems which were resolved when I anchored images only within text with styles that would not be included in the TOC, and also made sure there were no blank paragraphs (unnecessary hard returns) with a style that would be included in the TOC. Hope that helps.

  • Target system(Destination) for RFC call ?

    Need some help in calling an RFC for xi interface.
    For triggering the data in to xi , RFC needs to be called. This RFC can be called using an ABAP Program / report . BUT inorder to call that RFC a Destination / Target system needs to be defined . Even though RFC destinations can be managed by transaction SM59 what will be the target system for calling this RFC in a generic sense?
    Like what destination i should be expecting this code : ?
    REPORT  Z_TEST.
    CALL FUNCTION 'ZFunctest' destination ????
    Please suggest
    Krishna

    Yes i now understand the scenario : well is this statment correct ?
    When we say like this :
    CALL Function 'ZTEST' Destination SIDCLNT015
    does this mean ZTEST should be there in destination system ? which means the RFC i am writing should be there on xi systems whose system id is SID ?
    As i heard some where that ZTEST should be there on targetsystem i call for ?
    Please suggest
    Krishna

  • Target Message for generation HTML email?? : Michal's Blog (2718)

    hey folks,
    I'm trying out the scenario described in Michal's blog <a href="/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter">XI: HTML e-mails from the receiver mail adapter ?</a>
    What should be the target message type/interface which is generated by XSLT mapping? If it is an message type containing relevant HTML tags (HTML, BODY, P, OL etc), is there any standard XSD/DTD for HTML tags..something similar to XSD for mail package?
    The XSLT mapping seems to generate a HTML code w/o any XML header (<?xml version="1.0" encoding="UTF-8"?>). Is an XML message w/o this header valid?
    I appreciate your help/inputs
    thx in adv
    praveen

    Praveen,
    it can be anything
    Reason is that the output of your XSL mapping will not be validated against the target XSD and so you can create a dummy messagetype or use the source itself as the target message type etc.
    Regards
    Bhavesh

  • What is the recommende​d maximum file size for a VI ?

    1.) I am involved in documenting a project that includes LabView developed controls for a built from scratch test instrument. The LabView I am wading through involves multiple VIs, many of which are large files that are difficult to decipher. I would like the programmer to consider reducing the VI file sizes by breaking the large VIs up into sets of smaller VIs. What would be a target file size to shoot for?
    2.) Is it possible to avoid the use of global variables in LabView projects made up of multiple sub-VIs?
    Lost in Code

    Probably better guidelines that dictates 'size' of a vi are:
    typically no more than 1 video screen in size
    is it legible
    and is it's function and operation clear.
    I have seen examples of '1 vi does it all' that were many screens wide and tall, totally a flustercuck, and nearly 1 MB in size.
    Globals and local variables (except for LV2 style) are typcially shunned for they can create a host of problems (race conditions, indeterminant data).
    Use connector pane to wire controls and indicators to. Then use wires between vi's to transfer data. I tend to use clusters to hold shared data.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~
    "It’s the questions that drive us.”
    ~~~~~~~~~~~~~~~~~~~~~~~~~~

Maybe you are looking for