What is an Upgrade project mean

<Moderator Message: Besides you say you searched, I cannot believe that it is true. This question has been asked already a lot of times. May be you need to adjust your search terms>
Hello All
I tried to search for the relevant procedure or doc,,but I couldnt able to find the correct one,hence am posting this question.
What is an Upgrade project mean?
As we are going to upgrade from 3.5 to 7 version,,But I dont know anyhting of this upgrade and how to do also.Is there any fixed process for doing this.
Can anyone tell me what are the procedures involved in the Upgrade and what type of work will they expect from us technically as a BW consultant.
Thanks
Shankar
Edited by: Siegfried Szameitat on Feb 19, 2009 10:42 AM

Hi,
Search for 'Upgrade Project' or 'Roles of Consultant during upgrade'.
check this out:
Activities:
https://forums.sdn.sap.com/click.jspa?searchID=22518474&messageID=6953087
https://forums.sdn.sap.com/click.jspa?searchID=22518474&messageID=6729155 this one could be lucky that I wasn't in there because the links provided are not allowed.
Roles:
https://forums.sdn.sap.com/click.jspa?searchID=22518710&messageID=6622978
Siggi

Similar Messages

What exactly Implementation project means ?

I am having very limited knowledge on Implementation project!
I know EWM Module as i am doing automation testing. i just wanted to know what exactly EWM implementation project means? what are the steps involved?

Hello Manjunath
A project implementation for EWM requires definitions regarding structure of warehouse, in order to customize it based on a business blueprint. Then you start to change the system and test system behaviour. You must perform tests and finally move solution to production (this is a short resume of ASAP methodology).
Best regards
Carlos Díaz

What do you mean by changing a Function Group in upgradation projects

Hi ABAPers,
I am new to upgradation project will any one help me in understanding the concepts like.
1) what do you mean by changing a Function Group in upgradation projects
2) what is the relation b/w the Maintenance view and function group
3) what happens when we regenerate the table maintenance in se11
4) how can i restore the changes that have done to FG after regenerating
5) Suggest me is there any Tcode or procedure to see the code in Remote system (like how we compare the versions of remote system)
Could you please help me ..
Any relevant docs you can send it to [email protected]
Thanks in advance..

Hello Smriti,
          Exploding a BOM means to display all the components and sub-components for a BOM in a particular transaction (eg) VA01,CO01,ME22N etc..
You can use the SAP FM's depend on the Functionality:
CS_BOM_EXPLOSION               General BOM explosion
CS_BOM_EXPLOSION_EQUI          BOM explosion - initial screen: equipment
CS_BOM_EXPLOSION_MAT           BOM explosion (old version); as of 3.0, use CS_BOM_EXPL_MAT_V2
CS_BOM_EXPL_EQU_V2             BOM explosion for equipment
CS_BOM_EXPL_KND_V1             BOM explosion for material
CS_BOM_EXPL_MAT_V2             BOM explosion for material
CS_BOM_EXPL_PSP_V1
CS_BOM_EXPL_TPL_V1             BOM explosion for functional location
CSS7                           Explode BOM (Document)
CS_BOM_EXPL_DOC_V1             BOM explosion: document sub-assemblies
CS_BOM_EXPL_GNRL2_V1           General BOM explosion: document sub-assemblies
CSSO
CS_SO_MODE_BOM_EXPLOSION
As per Garet in response to your question better talk to the Functional team to get the better underatanding for your requirement.
Check the below link for more details on BOM:
http://sap-img.com/sap-sd/what-is-bom-referring-to-sap-sd.htm
Thanks,
Greetson

TS3694 itunes error (-42404) -- Okay, getting a little frustrated (but then again, who isn't a little frustrated?). I recently tried to upgrade iTunes software a few days ago but it failed. What is (-42404) error code mean?

itunes error (-42404) -- Okay, getting a little frustrated (but then again, who isn't a little frustrated?). I recently tried to upgrade iTunes software a few days ago but it failed. What is (-42404) error code mean?
I get the following:
(1) iTunes - The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? Yes/No
(2) iTunes - The software required for communicating with iPods and mobile phones could not be repaired. Please reinstall iTunes if you wish to use these devices. OK
(3) iTunes error message - A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404) OK
(4) iTunes error message - We could not complete your iTunes Store request. A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404) There is an error in the iTunes Store. Please try again later. OK
Okay, so I decided to uninstall and reinstall. Funny, iTunes can be found in a program folder, but it does not show up in the programs list. I tried to look for it using the command prompt ("wmic" --> "product get name") but iTunes is not there either. Doesn't even show up in the registry to try to uninstall.
I just want to "properly" uninstall and reinstall iTunes (plus the other usual suspects, Apple Software Update, Apple Mobile Device Support, Bonjour, & Apple Application Support). If anyone out there has any suggestions, please help! (I'm running Windows Vista -- don't judge/laugh) :-)

Okay, feeling like an idiot, but will share so others don't have to. I rebooted my computer and that enabled iTunes to reappear in the programs list. Don't appear to be having the same problems as before (no error messages now). Problem solved!

What is the role of an abaper in upgradation project from 4.7 to ecc6.0?

Hi anybody pls forward any documentation and ppts to understand the upgradation project
What is the role of an abaper in upgradation project from 4.7 to ecc6.0?
what we have to check and we have to upgrade give some guidance
thanks in advance.

Hi,
check the below link..
http://www.thespot4sap.com/upgrade_guide_v2.pdf
reward if helpfu.
Regards,
Nagaraj

What is unicode Checks in Upgradation Project

Hi Folks,
Can any one tell me ..
What is Unicode Checks in Uopgradation Project..
What it is Uded for?
Y it is need in Upgradation Project?

Hi Surendra,
Refer to the below related threads:
what is unicode
unicode
unicode
unicode
Hope this will help.
Regards,
Nitin.

What is the process for rollout projects and upgradation projects

Hi All,
Hope you all are doing well.
I am a new bee in oracle apps. Just would like to understand what is the process for rollout projects and upgradation projects and difference between them.
Please help me. Thanks in advance.
Regards,
MM

Don't know which phone do you use but if you configure your Exchange ActiSync Profile on your Phone there is an option for the CONTACTS. Basically Exchange account will pull the contacts from your profile.. I did test it on my iPhone 5 and works for mee
Where Technology Meets Talent

ABAPer role in upgrade project

Hi,
Please let me know the ABAPer role with upgrade project. When Std programs updated by support packs what are the responsibility of ABAPers?
Thanks,
Praneeth

Hi,
Automatic- It means that there will be a green icon. You will have to just click it and it is done.
This is because the changes to the SAP Object have been done either via SNOTE for some note application or you have used the modification assistant. So SAP does not have any problem in determining the changes. So the adjustment is automatic.
Semi-Automatic - In this case there will be a yellow icon. This means that you have to make some manual adjustments. This is because SAP considers that the adjustments are proper but still there is some discrepancy.Probably this is because you have made some note changes and additionally inserted some comments like begin of changes by xxxx on yyyyy for note zzzzz.
So in this case SAP will give you a split screen editor in whihc your existing code and the one coming from support pack will come. So you have to adjust accordingly.
Manual Adjustment - In this case there will be a red icon. This means that you have to make the chnages manually. This is because SAP finds a lot of discrepancy in your program and the one coming via support pack. The reason can be either the earlier note was incorrectly applied or you have added your own code for some custom requirment. So again SAP gives you the split screen editor to make the adjustments.
Your assumptions about Reset to Original and Adopt Modifications are correct.
I hope it solves your queries.
Regards,
Ankur Parab

Scripting problems with upgraded project file

Hello,
I hope someone can offer a bit of help on this one. I have a v3 project file that I upgrade to v4. I decided to add a "return to menu" script to this project file. 3 scripts to set GPRM 0 mov to 0,1,2 for three different menus. And a final Jump script to Jump to Menu 1 if GPRM 0=0, Jump to Menu 2 if GPRM 0=1, Jump to Menu 3 if GPRM 0=2.
This doesn't work - won't work in simulator nor on a build. I suspect that the culprit is the upgraded project file. I made a new v4 project file and replicated these same exact scripts and behold! It works!
So I figured out that it's the upgrade project file that is the reason why these scripts won't work! Very disappointing.
But now, what can I do short of rebuilding this project all the way from scratch?!?
It's too bad you can't open 2 projects and copy and paste from one into another.
Using DVDSP 4.0.3
Dual 2 ghz G5 Mac OS X (10.4.5)

If you'd like to strip out the project assets (video and audio) and use .pict images as place holders instead, then send me the file (with the place holders), I'll happily take a look at it for you. It should be working fine, and I suspect there is something small we have both overlooked.
There are no real issues with projects from v3 going on to v4 where scripting is concerned - the scripts are identical. There will be something else going on here...
Just to be sure your scripts are:
mov GPRM1, 0
Jump MainMenu // your actual menu name is here
then
mov GPRM1, 1
Jump SceneSelection1 // again, your actual menu name is in here
and
mov GPRM1, 2
Jump SceneSelection2 // and again for the menu name
Then your final script reads:
Jump MainMenu If(GPRM1 = 0)
Jump SceneSelection1 If (GPRM1 = 1)
Jump SceneSelection2 If(GPRM1 = 2)
The first script is the start up item for the disc, the second and third scripts are set as targets for buttons on the main menu (which means the script is run before the footage plays) - the last script is set as the menu call and end jump for the track.
You are sure that you are correctly re-setting the GPRM each time you move between menus?
If this simple scripting system isn't working then there is going to be a reason for it besides the upgrade... send me the file, I'll have a look. Alternatively, have a look here for downloadable stuff, and find the zip archive called 'Chi-Ho Lee', which is a simplified PAL version of how I think you should have this set up.

Upgradation project in sap xi

hi expects ,
     i want to know about what would the problem or process in upgradation project.please help me.
                                                                                thank u

Hi,
As an XI Developer one has the following responsibilities
SLD developement is depends upon the Organization.
1) Developing Interface Objects
2) Developing maping objects
3) Developing Config objects like Creation of Communication channels , Sender and Receiver agreemnets, Interface data and    Receiver data.
In Addition to this he has to check whether the files are correctly picking and the files are correctly placing in the Target.
Any Mapping related error means he has to look into those
what are the responsibilities of an XI Developer?
A) Steps are as follows.
1) Receives functional specs.
2) Understand the business requirements.
3) Check whether are the required information is provided in Functional specs or not information like, source sturucutre,target strucutre,Transformation rule, test files, validation rules, error handling, data size etc.
4) Raise issue log if there are issues and resolve it with functional team.
5) Start building or designing the tech specs with all the required details like IR and ID part.
6) Develop the object as per the design.
7) Follow the naming convention as per the doc.
8) Test the developed object with test cases and prepare UTC.
9) Then review will happen with other team members.
Regards
Mohammed

Some tools used for upgrade project

Hi experts,
I am looking for some tools used for upgrade project.What are the frequently used tools in an upgrade project.
Regards,
Kiran

Hi,
There is no specific tool for the upgradation. it dependts on organization. if it has developed its own tool means that is used for the upgradization. noramlly company gets the project based on the presentation of their tool.
our company has a great tool for the upgradization. which find out all unicode related errors and changes that has to be done in new verion.
like this each organization might havedeveloped their tools.
Regards,
Anki Reddy

Cutover Activities for Upgrade Project

Experts
What are the cutover support activities for the administration of the ECC 6.0 (SAP) upgrade project. Also please do let me know how to prepare cutover strategy , and how do we develp cutover plans.
Regards,
Mahesh

Hi,
Check this thread.
CutOver activities in BI7.0 while doing production upgrade BI7.0 FromBW3.x
Regards.

NWDI in upgrade project - Recommendations

Dear All,
We are upgrading ECC and Portal. Earlier client doesn't have NWDI.
Now we are using NWDI, so the customer wants the below recommendations.
1. Provide a recommendation for use of NWDI within the Upgrade project.
2. Provide a recommendation for possible ongoing / expanded usage of NWDI at the project.
Please provide your suggestions.
Thanks.

Hi,
1. If you are implementing ESS/MSS you can upgrade the components using NWDI.
In general for deploying components you either use JSPM or SDM to deploy. And NWDI uses the same method to deploy the components.
It's upto you to use NWDI or to deploy them directly.
Recommendation would be if implementing ESS/MSS you can use NWDI. If you are not modifying the standard SAP Delivered component then you can deploy the components directly.
2. It depends on what all things are you planning to implement.
Hope this helps.
Cheers-
Pramod

SCM 5.1 Implementation Project, Upgrade Project

Hello,
Is any one working on SCM 5.1 Implementation or upgrade Projects..
If you are doing SCM 4.0 to SCM 5.1 upgrade what are the Delta changes you have observed for DP, SNP , PPDS, GATP modules?

i suppose its called SCM2007
you can find the help file for this in help.sap.com
you can also find the release restrictions and release notes for SCM 2007
not sure of active customers
the release date is 31/08/07 as per the PAM
i think it wouldve been beta tested for the last 6 months at least
one might fond some customer specific SCM 2007 notes and that might give an idea of the customers who are using it - nestle/ HP??.... am guessing

Role of ABAP Consultant in an Upgrade Project

Hi Friends,
I'm an ABAP consultant, I've worked on Implementation Projects till now. Last one was on ECC 6.0.
I have been assigned to an upgrade project (from 4.6 to ECC 6.0).
So can anybody let me know what is the role and what are the responsibilites of an ABAP consultant in an Upgrade Project?

Hi,
Role of technical consultant:
1) Code fixes and bugs for upgrade objects
2) SPAU / SPDD corrections
3) removal of obselete statements by checking through the code inspector or EPC
4) replacing the BDC on enjoy transactions with BAPI
5) replacing the call transaction on obselet transactions with the corresponding new transactions.
Few of them are listed above..
Reward if useful
Regards
Shiva

What is an Upgrade project mean

Similar Messages

Maybe you are looking for