What is best analog to digital devise for Final Cut?

I'm using MYTV to transfer anolgue video tape to FC Express, and I can't get any audio. Is there a better devise that is compatible with Apple?

Does your digital video camera "pass through" to your computer? Alternatively you can connect your analogue camera/tape player to your digital camera, record on digital tape and then capture to FCE. It's slower, but works just fine if you only have a few tapes to transfer.
Ross Hunter
Orange, VA

Similar Messages

  • I want to produce wedding dvds.whats the best software to use...final cut x I'm thinking but what about the quality of the dvd?

    i want to produce wedding dvds.whats the best software to use...final cut x I'm thinking but what about the quality of the dvd? Can i use idvd?

    The only Programms I worked with are DVD Studio Pro and iDVD. You can burn a Video-DVD with Toast but  there is no real option to design your Menu. Just a few themes as far as I discovered.
    Do you have a Blue Ray Device to burn* the HD-DVD? Are the Bride and Groom able to watch the Blue Ray?
    * which is only possible with DVD Studio Pro and not iMovie as far as I know.
    This might help
    For better quality I would go the Compressor & DVD Studio Pro workflow I just learned.
    Export the Movie as is from Final Cut Pro and then use Compressor to encode the File.
    Consider delivering the Movie in a different way like a private video on vimeo, a Website or on an SD card which is not really romantic...

  • HT4589 What are the computer requirements or specs for Final Cut Pro

    What are the computer specs required for Final Cut Pro?
    Also is anyone operating Avid Media Seven on an OS X Lion 10.

    Lynn Kielley wrote:
    What are the computer specs required for Final Cut Pro?
    http://www.apple.com/finalcutpro/specs/
    Even though it says 4 GB RAM recommended, I think most experience users woild say 8 GB and up is the real minimum.
    Can't answer the Avid question.
    Russ

  • Premiere Pro 1.5: Best analog to digital converter for BNC?

    Recently I've been looking for an external analog to digital converter (that connects via firewire)that will work with Premiere Pro 1.5 for capturing uncompressed digital video from any source, whether it be BNC composite from a U-Matic to S-VHS via S-Video (either DIN or Y/C BNC) to Betacam SP BNC Component.  It would also be nice if it could import digital sources (i.e. DVCPRO 50/Digital Betacam) as well by SDI. 
    I've looked at a few by AJA or Blackmagic, but I'm not sure if they would work with Premiere Pro 1.5 on Windows XP SP3.
    Does anyone know of a good converter?

    I have NO IDEA if it will work with everything you list, but do some reading at http://www.grassvalley.com/products/converters

  • What kind of hard drive would be best to use as cache for Final Cut?

    Hi,
    I'm having problems with Final Cut Pro because it hangs a lot and runs real slow. I've checked the hard drives and found one of them had problems so I'm going to change it. For a SATA interface, what type of HHDD would you recomend, internal SATA II, External high speed firewire like Apple's G-Drive?
    Thanks in advance  

    If you have additional drive bays available inside your Mac, that would be my first choice.   Second choice would be an external eSATA setup and last would be an external Firewire drive.
    >External high speed firewire like Apple's G-Drive?
    Apple makes a G-Drive?  I thought those were only from G-Tech: http://www.g-technology.com/products/g-drive.cfm
    -DH

  • What external Hard drive should I use for Final Cut Pro?

    Hi:
    I have a Mac Pro and I'm planning to work with HD. What external hard drive should I use?
    PD: I have a NVIDIA on a PCI Express graphic slot.
    Thanks,
    Cabezon

    You'll need to be much more specific; there are 20 or 60 different kinds of high definition. Some require nothing, some require superfast RAID, some require specialized hardware support.
    bogiesan

  • What is best all in one printer for my new MacBook Pro ? Needs to make very high quality photos.

    What is best all in one printer for my new MacBook Pro ? Needs to make very high quality photos. Using USB connection.

    That's a difficult one but I'd always go for HP as they make so many excellent models that you'll always be able to buy the cartridges from almost anyone.  Theyre darn good printer too.  I have four in the office here and one of them is a very neat flatbed with exceptionally high tonal qualities.  One of their cheaper models is the HP 5520 A4 inkjet all-in-one - CMYK.  Good value at £70 and 4800 x 1200 DPI. 

  • Student Help advice! what is best iMac model for Final Cut Pro and logic pro

    Hi
    I am currently looking into getting a iMac, but is toggling to device if I need a 27inch or a 21inch(top model),which will be used for Final Cut Pro and logic
    There is a lot of money being invested iMac, and I really not want to be stu k with a computer that not going to keep up with the amount of work load in the future.
    The specs that I have on mine are..
    21inch 
    Upgrades include
    Sdd drive 512gb
    Intel core i7
    16gb of ram
    Or
    27 inch
    Upgrades
    Fusion drive or sdd 250gb
    Intel core i7
    (Possible graphic card) NVIDIA GeForce GTX 680MX 2GB GDDR5 [+ £105.60]
    (Ram is way to expensive so will buy from second party)
    Anyone who has brought a iMac for final cut or logic what would you likely buy?..Am really stuck on the hard drives between the 27inch fusion and 512gb on the 21inch
    My budget is £1900
    My fear is that the 21inch top model's graphic card may not be good enough for advance editing on Final Cut Pro In the future when I start to get more deep into editing..logic really only needs 8gb to run smoothly..buts its the final cut specs that am having problems deciding. I know iMacs are not future proof or technology lasts for that matter, but I do expect to have it run good for a number of years before I upgrade again.
    If anyone can give me some advice, or even tell me about there set up they have for media work please let me know.

    All kinds of things affect system & HD performance, I can't tell you why your 4 year old Mac is slow.  Just because your old Mac is slow doesn't mean that a new iMac will be equally slow.
    You are correct about the issue with the smaller fusion drives.  It's one of the reasons I am not high on recommending them.  Everyone thinks they want power & performance but don't understand the gap between marketing and real life performance.  The 1TB fusion drive however should give you a good combination of rapid access and sizeable storage capacity.
    I have used external FW800 / 7200rpm drives for years and have never had a problem with any of them.  I consider them very reliable but admittedly I DO NOT use consumer drives like the WD MyBook that the big-box stores sell.   For the most part I assemble my own with OWC Mercury Elite enclosures.  In the past few years I have centered on WD Caviar Black and WD Scorpio Black drives.  I also have some Seagate Barracuda 7200.xx drives.  They all perform excellently and reliably.
    Pls. refer to my earlier post for what i recommended to you.

  • WHAT IS THE BEST VIDEO CARD FOR FINAL CUT PRO and MOTION?

    Hello folks,
    I have found a lot of posts regarding all kinds of troubles with ATI READEON X1900 video card.
    When I talked to people from Apple, trying to decide which videocard to install in new MAC PRO, Ati Radeon X1900 was the one they did recommand for FCP and Motion. So are there any other cards which would actually suite better for Final Cut Studio2, or is Ati Radeon X1900 really the one to go with?
    Thanks for any suggestions,
    Kootenay

    Techreport has some more information on the new 55nm Radeon (X3000) which should be another "mid November" releases, as well as an updated 8800 GT that still is under wraps.
    So seems Intel and everyone else is trying to get new products out before the end of the year, if possible.
    Drivers for graphics controllers may or may not need the work that sometimes seems to plague companies.

  • What is the cost for Final Cut Pro if I don't have a previous version to update?

    What is the cost for Final Cut Pro if I don't have a previous version to update? I see the $299 price for updates.
    What is the brand new purchase price?

    Thanks so much. Yes I was thinking on the lines of PwnySlaystation's response.
    I appreciate the help.
    Will this new version run on OS 10.6.8?
    Thanks for the help.

  • What is the recommended set up for Final Cut Pro re: Scratch Disks etc

    What is the recommended set up for Final Cut Pro with regards to Scratch Disk etc.
    I have a lot of projects and at the moment they are all over the place on various external HDDs etc.
    I just bought a new Firewire 800 External HDD and want to get everything straight but I'm not quite sure where to start...
    Any advice would be appreciated.
    Thank You

    Media Manager (available from the File menu bar item) will consolidate all elements of your project together with a linked copy of the project file to a single folder in a location of your choice. There are various options to leave out unused footage, include handles etc. Safest way is to copy the files. Delete the originals when you are sure the copy works.
    The user manual has a detailed description of how MM works.

  • What other programs are for Finale Cut Pro

    What other programs are for Finale Cut Pro?
    Like added transisions and such.

    Start out here where you'll find tons of top quality FREE plugins made by some very creative folks.
    http://www.fcp.co/forum/9-free-fcpx-plugins-and-templates
    The only "must-have" plugins I'd recommd are "Slice X" by CoreMelt, and "Nattress Levels & Curves" from Noise Industries (FX Factory).
    Everything else is just eye candy.
    I advise my students to not buy plugin until you actually need them for a paying job, and have that work pay for it.

  • What are the system requirements for Final Cut Pro 7?

    I can't find the system requirements for Final Cut Pro 7, I can find the system requirements for X, but like I said not 7.
    I need to know the system requirements for Final Cut Pro 7, so I can buy the correct Macbook.
    Is there anyway I can find out the system requirements.

    Thanks
    I'm somewhat inept about things like this, so I just want to make sure once more: This is in regards to Final Cut Pro 7?

  • IMac to TV for Final Cut Pro

    I'm a newbie so forgive my ignorance.
    I have a mid 2010 iMac and I would like to hook it to my HD insignia TV to view playback for Final Cut content.
    I just need to know which method is the best (VGA, Mini DV, Hdmi, etc)
    What cords &  adapters do I need?
    I'm running OS X mountain Lion with Final Cut Pro X.
    Insignia 32inch HD TV model # NS-32LB451A11 (rev A)
    Thanks!

    Oh. I also have a Cakewalk US-25 EX 24bit 96 kHz sound card too.

  • Best way to adjust audio on Final Cut Pro 5 Quicktime Export?? Render files

    What is the best way to adjust audio on Final Cut Pro, Quicktime self-contained export? Please note all render files and orginals master clip are gone. So adjustments will need somehow be made to the exported Quicktime file.
    As always thanks in advance for your reading and replying to my post,
    Sebastian

    Export the aiff file out of QT Pro, and import it into SoundTrack. Sweeten there

Maybe you are looking for