What is best for my career: Sap ABAP or Sap BI

Hi Experts,
I am Rajesh, done my bachelor degree in Information Technology,
having 4 years of Exp as a Mainframes Programmer in a Banking Software company.
my job containts
30 % understanding the product
40 % Analysis
30 % Programming
my career Goal is to get SAP job in Abroad(US/UK/AUS) for that i am planning like below:
First i want to gain some minimum(8-10 Months) Exp in India by
Choosing one Best(or)Hot Cake Module in SAP, which matches any one of 3 points
1)Currently that module should have more demand less supply.
2)Should have good Future
3)it should not be much vast Because need to expertise Early
I already Trained and good in SAP-Core ABAP,
but just Core ABAP is not enough to get expertise in ABAP, because i need to add it with
OOPS, Webdynpro, Workflow ETC.
even i Trained in all the above, it is difficult to be Expert in 1 YR.
and Hard to get job in US/UK/AUS.
So i am planning to go with SAP-BI for below Reasons
1) SAP BI is not that much Vast compare to ABAP for becoming an Expert on it
2) for Skill Set ABAP+BI, can have good openings
3) SAP-BI is a techno functional Job, where ABAP is not a final Destination.
4) in Future, BI will help to get into HANA.
I request you to guide me, whether my decision towards my Goal is correct or not,
if not, please give valuable Suggestions to reach my destination.
Thanks in Advance,
Rajesh

Hi Rajesh,
as per as your selection of module, its a good mix, but i have a few words that i wants to share with you. Being a developer in sap abap i have come across some points where many indivisuals get strucked by asking what is next.
Started with sap abap you will have many options to go ahead, as you have seen that the combination of BI along with ABAP has an added advantages, and yes later on you can move towards HANA, one of the major sap module in which the database of sap persist in furure.
As far as i concern, if you wants to be in technical stream of sap you will have UI5, Webdynpro, Workflow, BW/ BI, HANA etc, so you may go ahead with these options, but as you have told that you wants to get hands on these things in one year, i think you have to devote in abap as much as possible
what you will require to know the syntax and semantics used in SAP, along with all the stuffs associated with it, once you will get familiar with it, you can play as you wants.
But one thing more is that its not mandatory to have sap abap knowledge to learn other technologies,  you can learn without abap, but if yiu have hands on in abap somehow it will boost your future in related technilogies.
So, finally your decision is on right track, what you will need is to get it as your passion.

Similar Messages

  • External drives... whats the best for video.... ?

    Hi everyone,
    I'm trying to figure out what the best bang for the buck is in regards to external drives, and what works best for video.
    I have considered the LaCie enclosures, I have also considered buying a 500 GB SATA to replace the 200 GB second drive I have inside the G5. The issue than is what enclosure works the best with a MAC and is 1394 and will the firm ware support huge video files, for render or exporting?
    Can anyone give some advice based on what they have learned through past experience.
    Thanks

    I've been using LaCie FW (800 & 400) drives for about three years now with only one problem - One of the first drives I bought (I think it was a 120 GB) fried itself a few months ago. I currently have 80GB, 120 GB, 400GB and 500 GB drives, all working fine, never have dropped frames. The LaCie drives are pretty tough too, as I've sent most of them back and forth across the country at least a few times with no problems.
    However, be careful if you update the firmware for them - make sure the drive is clean as the firmware update can cause corruption of data on the drive (I found that out the hard way!). Also keep in mind that they do put off a fair amount of heat (especially the big ones) so I wouldn't consider stacking them on top of each other horizontally.

  • What apps can I download for my account, Photoshop CC, and what is best for that program

    What apps can I download for my account, Photoshop CC, and what is best for that program

    Hi Bosseb,
    You can install products listed in the Download Center, all are included except Photoshop Touch
    https://creative.adobe.com/products
    On the left hand margin you can see products based on field, Audio/Video, Gaming, Graphic Design, Photography, etc.
    If you have a fulll membership you can download any that are included that interest you.
    -Dave

  • Where do i find daily posted question on sap abap and sap webdynpro abap

    Hi
    where do we find Daily posted questions on sap abap and sap webdynpro abap in scn sap  so that i can go through the questions and answer them .

    Hi,
    Go to the Content tab of any space and click on discussions. Then you can sort them by date created or any other
    For ex: This link for WDA discussions: - Web Dynpro ABAP
    You can also click on Receive email notifications for any space to get updates on that space.
    hope this helps,
    Regards,
    Kiran

  • SAP-ABAP or SAP-BI/BW

    Hello All...
    need your help.
    I am currently working on SAS technology as a SAS Developer. I want to learn SAP. But have confusion between SAP-ABAP and SAP-BI/BW.
    Which one will be good for me? SAS gives me basic BI background so thought of BI/BW.
    & Will I get job after the course completion. I am having 2.5 years experience on SAS.
    Please help..
    Thanks...:)

    Hi,
    Module selection is totally depend on your interest.
    ABAP - is purely technical and coding work. if you have strong skill on coding then you can choose ABAP module.
    BW - its data warehouse. its techno-functional. You don't need any special skills to learn BW. its easy to  understand the BW concepts.As per business needs we need to design data flow by using BW architecture(extended start concept).After design of data flows we need to load the data from different sources and do the reporting by using Bex tools(Bex designer/analyzer).
    BW have 3 major areas.,
    1. Modeling/Designing.
    2. ETL - Extraction,transferring and loading
    3. Reporting - Bex tools.
    Thanks

  • Shall I learn SAP ABAP or SAP Buisiness Obejets.

    Hi,
    I am currently working Qlikview BI Tool. Now I wanted to learn SAP fine.But here I have problem that
    shall I learn SAP ABAP or SAP Buisiness Obejets.
    Which one gives me better career future.
    Any suggetions appriciates...
    Thanks.

    Hi, it's quite different things. If you good 'business' side from BO then it's better to learn BO

  • Adobe reader does not work, what is best for viewing pdfs?

    While using Safari, I keep encountering a message that in order to view a .pdf, I need to download Adobe Reader, accept the end user agreement, then relaunch.  I have tried to do this many times and keep getting the above message. What program is best for viewing pdfs using Safari on an iMac

    Back up all data.
    If Adobe Reader or Acrobat is installed, there should be a setting in its preferences such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected. Otherwise do as follows.
    Triple-click the line of text below on this page to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, remove any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present. The same goes for a plugin called "iGetter," and perhaps others.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • What settings best for screen reading & min/no header/footer?

    I prepare documents for reading online on web sites.  How can I create pages that scroll smoothly and contain maximum text and other features on the page with minimum wasted white space.  These documents are never intended to print anywhere - in fact want to discourage any such attempt.  What settings are best for this in Adobe?

    This really has nothing to do with Acrobat, but is a general question about reading information on a screen. There is no easy answer since people have monitors of different sizes and keep the monitors at different resolutions. I have no problem with discussing this here, but you might get a better response in the Design or Web Design forums. As a first step in the discussion, you might try to figure our what size monitor you want to target.

  • What's best for my battery.

    I use my macbook alot, like 8 hours a day. So I was wondering what would be the best for my battery.
    Should I always connect it to the adapter. Or should I use it on the batterypower and charge it when its underneath 20%.
    Thanks in advance.

    The consensus here seems to be: (1) that it's quite ok to leave it plugged in; (2)  It is good to use the battery occasionally, per
    Apple - Batteries - Notebooks
    (3) It is not good to run your battery all the way down, or even close to that.
    Following these guidelines I have a battery which is 15 months old, with 108 cycles and currently reads between 98-100% health.
    charlie

  • What's best for allowing document download?

    Hi All,
    Quick question really. I'm looking to create a simple HTML page which is to provide documents and photos to be downloaded. Essentially there will be several pdfs and high res images for people to download and I was wondering what the best way to do this is without creating a very long page.
    Ideally, I'd like them to be able to read the PDF and then to download it and for the images to be in some sort of gallery and that if they click on the image they want they can download it. I've got all my images stored on a website called dropbox.
    I'm very new to Dreamweaver CS3 and am trying to get through the dummies guide and free online tutorials but can't lay my finger on the answer really.
    All suggestions greatly appreciated.
    Thanks,

    PDFs are downloaded anyway when your end user's click on a direct link.  For added convenience, you could combine images and PDFs into a folder and Zip it.  I use 7-Zip  http://www.7-zip.org/
    Another approach is to use a ForceDownload script in your favorite server-side programming language.
    This demo uses PHP:
    http://alt-web.com/TEST/formtest.shtml
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • What is best for my macbook pro... turn off,sleep,or leave it on?

    i know that u can leave it on for a couple of days nd it will b fine,but i would just like to know if its best to turn it off during the night.i dont mind that i have to wait for it to turn on,i just wanna do the best for my macbook pro.

    Some of LeafsMac's points make sense.
    Letting the battery completely die is not good.  Always plugged in, even asleep, it can die if power is off long enough.  But good planning can get around that.
    Also, it does need to run on battery once a month at least, down to 40%.  Then recharge back on A/C plug.
    Interesting note about MBPs ...  Even on charger the battery will lose slowly battery charge from 100% to 95%, then recharge to 100% all by itself.  That is to exercise the battery a little bit and save "recharge circuit" usage.  Nothng to worry about.

  • SAP ABAP or SAP Functional???

    Hi all,
    Im in SAP technical consultant since 16 months but i have observed that functional consultants have better prospects in career growth, im interested to switch to functional. Is this a right decision to switch to functional?
    If yes, which module should i be traind in and any registered institute in bangalore providing the same.
    And is it that only MBA candidates can go into functional?
    And what will be my job profile after 2 yrs?? will it be SAP technical or SAP functional or SAP technofunctional and for which profile shuld i apply for?
    Thanks in advance

    Hi,
    Both technical and functional has better career prospects. It depends on each person to which career path
    he likes to take. If you are good at technical you should continue in the same. It is always better to be in
    your strong area instead of moving to another area thinking of career prospects.
    And to move to become a functional consultant you should have domain experience. It is not like
    learning the technical things. You have to gain that through experience. With such a small experience of
    16 months, i would say you continue for some more time there and learn the functional side of the
    module that you are currently working on. If you move to the functionla side in same module, you
    will be more comfortable. But if you are moving to a totally different module, domain experience
    matters and the career prospects for you will be less with no domain experience.
    And there is nothing like an MBA can only do functional. It is the domain experience matters, not really the degree.
    And the profile after 2 years, you should decide which path to take. With the current profile , you will be a technical
    consultant.
    Regards,
    Leon

  • SAP Netweaver XI      VS      SAP ABAP       VS       SAP BW

    Hi Guys,
    I'm an SAP BASIS administrator. But I am thinking of a career change in my company and if I will be given a chance, I am choosing between the three below.
    SAP Netweaver XI
    SAP BW
    SAP ABAP
    I am confuse on which of these three is the best one.
    I like BW because many says that this is very in demand.
    I like ABAP because I love programming. But I am afraid that this will not be in demand in the future because of the (Netweaver - is it true?)
    Lastly, knowing that Netweaver is new in SAP, I am thinking that this will be popular and in demand now and in the future.
    Could you guys share your thoughts about this? Which one is the best to choose from the three.
    Thank you in advance.
    Erwin

    Hi,
    In my view as you are already experienced in BASIS you shall go with it and cover the all stacks of NetWeaver and be the NetWeaver BASIS consultant. Here you can have exposure of all the stacks XI/EP/MDM etc and as a BASIS person you will have more opportunity as well if you are able to handle it.
    Regards,
    Subhash

  • Which module SAP ABAP or SAP PS

    Hi
    I am Varun Maheshwari. I have done B.E in electrical and Electronics. I had experience of 1.8Yr in Project management as Project assistant in Centre for Wind Energy Technology(on Contract basis). My role was Planning of the project, Site selection- Pan India, Resource & inventory planning for installation purpose, Budgeting the project, Collection of the data and analysis, Report generation as per the analysis to the management and third party.  I am willing to pursue career in SAP domain but i am really confuse between SAP domain (SAP PS or SAP ABAP) which will be good if you consider growth & opportunities.
    Please guide me considering Market Scenario, Future Growth & Recruitment Opportunities?
    I will be highly thankful to you !!
    Regards
    Varun Maheshwari

    Hi Varun,
    Since you already have almost 2 years of experience in project management, it is better to capitalize on this experience by choosing a career relevant to your experience. This experience counts when you go forward in the same area (Project management).
    In SAP, for project management there are three tools serving different business processes.
    1) SAP PS (Project Systems)
    2) SAP PPM (Portfolio & Project Management)
    3) SAP CPM (Commercial Project Management)
    In general it is better to start with SAP PS and then later on with SAP PPM which has very good integration with PS.
    Coming to your query on future growth/recruitment opportunities.. There are lot of job opportunities for SAP PS in the market.. Any project in any company in this world requires a tool to monitor & review the project progress. Considering this organisation may use either SAP PS / PPM / Microsoft project / Primavera. But definitely organisations using SAP uses SAP PS for project management. So in short, there is no shortage of demand for SAP PS.
    Considering your experience, I have given my opinion and it finally depends on you to choose a career in which you have passion.
    Regards,
    Ravi

  • How do I change from Firefox 17 to Firefox 16 on my android and can I keep Firefox 17 at the same time on my Windows 7 PC? Whats the best for jelly bean?

    Some apps are not compatible on Acer A210 Iconia Tab jelly bean. What are the most recommended apps or widgets for Acer A210? How do I uninstall Firefox 17 and install Firefox 16 on my pc or what is the best version to use with the tablet? Thanks if you have a solution. Using Windows 7 home premium.

    The best version to use is Firefox 17 (it's the stable release). as for best apps, it's all up to you on what you want to use.

Maybe you are looking for

  • EDI - Seeburger: Replace existing VAN FTP connection.

    Hi All, We have running EDI interface in PI using Seeburger adaptor and GXS VAN service provider using FTP channel. Now one of our Vendors has upgraded to PowerTrack system and hence they can not accept FTP connections. Instead they are asking us to

  • What`s the maximum wireless range? (how many feet?)

    i`d keep search for this features through the whole website in apple.com and the reviews from other websites. But, there isn`t any may solve my question. Is there anyone can help me? i hope to know that how far range for the airport extreme 802.11n c

  • Easy Cost Planning in a currency other than Cont Area and comp code curren

    Hi,     I want to do the easy cost planning in a currency which is other than controlling area and company code currency.   But I am getting the option of only these two currencies only. Any idea how to do it? Example:   Controlling Area currency :IN

  • Adding wireless priter to the toolbar

    How can I add a wireless printer to my toolbar

  • Dreamweaver On A Mac

    Hi, I am a Windows User but have just switched to the mac. I'm using the new Dreamweaver and would like to have the same type of window-based work space in Dreamweaver. When it opens windows are everywhere - can I change it back to look like it does