What is best method to overcome jerky video export ?

Hi
Flash CS5.
A basic fundamental issue here, getting a decent movie exported from flash.
I have a 60fps movie (25 was jerky motion [png images as MC’s classic tweened across screen] and after various fps tests 60 was settled on) with MC’s cars and humans and other items, all MC’s have 60fps timelines, cars and humans with reflections moving across screen. It all plays fine in Flash with ctrl enter. Export it as an avi and play with Quicktime and the action is not just jerky, vehicle enters stage, stops, 5 secs later it jumps halfway across, etc etc, it should run smoothly all the way.
Likewise mov.
As the swf is smooth, played via browser, published file set etc, I reckoned converting that would be better.
I have used an swf to avi converter (iWisoft) , tried all settings highest bitrate, mov wav avi, all are jerky, vehicles move but in a slightly jumpy way, you see double roof panels etc.
I have seen a thread
http://forums.adobe.com/thread/747600 with an apparent solution.
saying play movie on timeline by hitting enter and watch the fps vary, well mine stays steady at 60 !
It then says export at 5 fps, allows coding of each and every frame, so I alter the 60 to 5 on timeine and then export movie at 5fps as avi.
Play avi and the reflections are solid not translucent, so that’s no good. If it means going into every MC and altering the fps also to 5 that’s far too much to do. I have MC’s in MC’s in MC’s like a russian doll ! Would not converting all the MC’s to 5fps be the cause of loss of reflections ?
What a crazy thing to have to do after creating the movie. Tell us this before we buy flash.
However I try for a convert to 60fps, using VirtualDub and the result plays in Quicktime with jerkiness. In VLC Media Player its warped and grey, total mess.
The ‘Correct’ marked post in the thread above didn’t work at all.
Any other ideas, as posters in that thread were commenting on a lack of Adobe input to this issue being faced by various bods, creating movies in Flash that look fine but with an inability to get them as mpeg avi etc is bad news.
Is there an official method decreed by Adobe on this now. ?
What actually truly works ?
Envirographics

This isn't a Dreamweaver question as much as it is an SEO question.
Web searches reveal results based on content inside semantic HTML; not their URLs. So a link to index.html carries the same approximate weight as a link to http://yourdomain.com.
The main diff is that DW cannot manage absolute links for you. It can only manage links that are document or site root relative.
Nancy O.

Similar Messages

Whats the best method to cut out hair?

Im using photoshop Cs4 - whats the best method to cut out hair from a background?

I just had to do a quick search, because I was not sure when the Refine Edge was introduced, but it appears you do have it in CS4. Check out this tutorial, but ignore all the stuff about paths. Make a rough selection with Quick select - it shares a location on the tool bar with the Magic Wand, so don't confuse the two.
Having made the rough selection, open Refine Edge. I remember it took me a while to get the hang of it, but tutorials will help
http://www.youtube.com/watch?v=bxKPUW1vYEg
The above tutorial deals specifically with CS4. This next one is probably the best real world use of Refine Edge I've seen, because it uses a difficult subject (as opposed to the easy selections so many tutorials fob you off with)
http://www.youtube.com/watch?v=ssJRkbkHAa4

F110: What is best method in voiding an EFT payment after check run?

What is the best method in voiding or reversing an EFT payment after a check run (F110)?
Thanks!

have you figureed it out?
if I didn't remember wrong, we first find the clearing document number in proposal log, and used FBRA to reset the clearing items, then reverse the document
I am also interested in setting a dummy check number for EFT, anyone can throw some ideas here?
thanks
Keqin

When bouncing- what's best method for smallest file size/highest quality?

I am in the process of embedding 3 mp3's into a PDF to submit as a portfolio. The PDF also has text, and two scores included, and with the 3 embedded mp3's it can't be more than 10mb.
So my question is: When bouncing a project out of Logic, what is the best method for getting the smallest file size, but retaining the best audio quality? And once it's out of Logic and it is an mp3 or other type of audio file, is there a best format for compressing it further, and still maintaining the relative quality?
I bounced out the three projects into wav's. Now I am using Switch for Mac to compress them down to smaller Mp3's. I basically need them to be about 3 mb each. Two of the recordings sound OK at that size, but they are just MIDI(one project is piano and string quartet, the other is just piano- all software instruments. The recording that combines MIDI and Audio and has more tracks (three audio tracks and 10 Midi/software instrument tracks)and sounds completely horrible if I get it under 5 mb as an mp3. The problem is that I need all three to equal around 9mb, but still sound good enough to submit as a portfolio for consideration into a Master's program.
If anyone can help I would really appreciate it. Please be detailed in your response, because I am new to logic and I really need the step by step.
Thank you...

MUYconfundido wrote:
I am in the process of embedding 3 mp3's into a PDF to submit as a portfolio. The PDF also has text, and two scores included, and with the 3 embedded mp3's it can't be more than 10mb.
So my question is: When bouncing a project out of Logic, what is the best method for getting the smallest file size, but retaining the best audio quality?
The highest bitrate that falls within your limits. You'll have to calculate how big your MP3's can be, then choose the bitrate that keeps the size within your limit. The formula is simple: bitrate is the number of kilobits per second, so a 46 second stereo file at 96 kbps would be 96 x 46 = 4416 kbits / 8* = 552 kBytes or 0.552 MB. (*8 bits = 1 Byte)
So if you know the length of your tracks you can calculate what bitrate you need to keep it within 10 MB total.
I consider 128 kbps the lowest bearable bitrate for popsongs and other modern drumkit based music. Deterioration of sound quality is often directly related to the quality of the initial mix and the type of instruments used in it. Piano(-like) tones tend to sound watery pretty quickly at lower bitrates, as do crash and ride cymbals. But don't take my word for it, try it out.
And once it's out of Logic and it is an mp3 or other type of audio file, is there a best format for compressing it further, and still maintaining the relative quality?
You can only ZIP the whole thing after that, but that is just for transport. You'll have to unzip it again to use it. And no, you cannot compress an MP3 any further and still play it.
I bounced out the three projects into wav's. Now I am using Switch for Mac to compress them down to smaller Mp3's.
That is silly, you could have done that in Logic, which has one of the best MP3 encoders built in. And how good encoders are will especially come out at bitrates around or below 128, which you might be looking at.
I basically need them to be about 3 mb each.
So, one more scrap of info we need here: how long are those three pieces, exactly? I'll calculate the bitrate for you - but please bounce 'm directly out of Logic as MP3's. They will very probably sound better than your WAV-conversions made with Switch.
!http://farm5.static.flickr.com/4084/4996323899_071398b89a.jpg!
Two of the recordings sound OK at that size, but they are just MIDI(one project is piano and string quartet, the other is just piano- all software instruments. The recording that combines MIDI and Audio and has more tracks (three audio tracks and 10 Midi/software instrument tracks)and sounds completely horrible if I get it under 5 mb as an mp3. The problem is that I need all three to equal around 9mb, but still sound good enough to submit as a portfolio for consideration into a Master's program.
Length of the piece? And does the .Wav bounce you have sound OK?

Whats the best method to deploy sccm 2012 client

Hello what is the best method to deploy SCCM 2012 client, is there a script that should be used as sometimes the client push fails. In particular pushing the client to server 03 /08/12 types.
Thankyou
SCCM Deployment Technician

Ultimately, the best method is whatever works for you. Every environment is different and has unique constraints and requirements. You first need to learn out each of the methods and what they do to be able to properly evaluate which will work best for you.
Kind of like mining for gold, who cares how you got it out of the ground, once you get it out, you're rich :-) But if you rely on someone else telling you what the best way was for their mine, you may not be doing it the best way for your mine thus you need
to geological surveys, exploration, trial and error, etc. In other words, you need to do some real grunt work.
Often, using multiple methods is best though because each has its pros and cons (yes, even my startup script -- thanks for the cheerleading Michael and Tim). But as mentioned, it all comes down to you learning about your environment and the different
methods available to make the best choice. If there was only one "best" way to do it, there wouldn't be multiple available and none of us would really be needed.
Jason | http://blog.configmgrftw.com

What is best method for transferring iTunes library from PC to iMac?

I have a new iMac. I have authorized it with my iTunes account. My current iTunes library is on a Windows Vista PC, not on the same network. What is the best method for me to use to transfer the iTunes library from the PC to the iMac?

iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you let iTunes manage your music: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Start iTunes with the option (shift on Windows) key held down and guide it to the new location of the library.
Macworld - How to transfer iTunes libraries between PC and Mac - http://www.macworld.com/article/46248/2005/08/shiftitunes.html
Move an iTunes library from a Windows PC to a Mac - http://www.macworld.com/article/1146958/move_itunes_windows_mac.html

Most recent update changed all font sizes. What is best method to change back to to preexisting Fonts

The most recent update changed all font sizes (smaller). What is the best method to enlarge?

yeah, that's what I ended up doing late last night because the white font against pale gray background was driving me nuts. I hadnt changed anything. been using the same theme for about 4 months but then all of a sudden, like I said, the font color mysteriously changed.
anyway, thanks for your help.

Purchasing new iMac (27 i5), what is best method to transfer programs/files/documents from 24" iMAC? What is the best method to remove personal data from OS?

Purchasing a new iMac (27 i5), what is the best method to transfer programs/files,documents from a 24" iMac?
What is the best method to remove personal data from the 24" iMac?

Use setup assistant which is offered when you setup your new Mac. It will transfer information from a Time Machine backup, Clone or another Mac.
It's best to do this during setup to avoid issues with duplicate IDs.
Regards

HT1937 What is best method to boost network signal iPhone 5

I live on the lower level of the apartment complex with the woods and hills I get no service unless I go on my patio which gets maybe 2 bars. How do I figure out what my best option will be when installing a signal booster. I don't have a wifi issue just network

Check with your carrier and see what they have available. AT&T has Microcells available that use your broadband internet connection to provide you with a boosted signal at home.

What is best mac mini for easy video editing? Late 2012 quad-core or late 2014 double core?

Hi!
I want to buy Mac mini and don't know which one is best for me. Please don't tell me to buy anything else, because it is my choise. I only need to know what is better:
Upgradable late 2012 version with quad core i7, 2.3GHz, 8gb of RAM and Intel HD Graphics 4000
or
Non-upgradable late 2014 version with dual core i5, 2.6 GHz, 8 gb of RAM and Iris graphic card.
I do short videos with a few effects, transactions, fades, titles, sometimes add CC. So which Mac mini do you recommend, guys?

as a windows/premiere user i can only speak to the hardware. 8gb ram in either should be fine for short & simple projects. the i7 is alot better, however the hd graphics 4000 is not as good as the iris and may require running the mercury engine as software only. this means no using the video card to help premiere run faster. anything outside of premiere using the cpu for day to day tasks would also appreciate the i7. depending on the model of the iris graphics, it may be a couple times faster than the hd 4000 and therefore might work in premiere. according to adobe it lists the Intel Iris Graphics 5100 and 5200 as working System requirements | Adobe Premiere Pro if you get into other adobe apps, the graphics wont matter as much and the i7 will run faster. it is faster video vs faster cpu, which to pick...

Whats the best size to make a video for the iTouch

I am making some films for the iTouch and when I export them from final cut they have black lines down each side, I can zoom in but then they are cropped at the top. I want to reframe everything to frame it perfectly in final cut
at the moment its High def dv pal,
should I be editing it widescreen?
how should I out put it (dont say iphone export that leaves the lines)
should I deinterlace it?
please help
thanks a lot

whats the max resolution the Touch supports?
I was wanting to make video files to play on a Touch, PSP, iPod Classic. Is this possibel? what settings? and what app do you recommend please? I have a iMac and a PC
cheers

What is best method for designing InfoCube?

Hi BW Guru`s,
I have some doubts on InfoCube designing.
I have a scenario like, I have 25 Characteristics ( Customer, Sales Org, Brand, Material, Material Group etc..) and 10 keyfigures (Sales, Revenue, Amount,etc..). By using these objects how to design the Infocube. But I know the normal design process. Does any body tell me best design method of Infocube and it should not effect any kind of performance issues ( load performance and Query performance).
good points will assiagn.
Thanks in advance,
venkat

hi,
I have a scenario like, I have 25 Characteristics ( Customer, Sales Org, Brand, Material, Material Group etc..) and 10 keyfigures (Sales, Revenue, Amount,etc..). By using these objects how to design the Infocube. But I know the normal design process. Does any body tell me best design method of Infocube and it should not effect any kind of performance issues ( load performance and Query performance).
As you dont have much charecteristics and key figures to design your cube, create Dimensions for CUSTOMER, SALES DATA, MATERIAL, BRAND etc. and put the logically related charecteristics into the dimensions.
For example: Customer Dimension( Customer ID, Customer name, customer Address etc.)
try to create the smaller Dimensions for performance reasons.
assigning points is the way to say thanks in sdn
regards
vadlamudi

When ipod connect via usb to my computer what is best method to disconnect.

i have connected my ipod to my computer, via usb but I am not sure what is the best way to disconnect; i have been simply pulling it out of the computer. But I think I lost my music downloads when last I did this

Ty testing after plugging your laptop into the wall, your laptop may be reducing power to the USB port.
For more general info and tips, take a look at this Apple doc -> iOS: Troubleshooting USB connection

What is best method to retrieve data from two databases

I'm writing a report that needs data from two sql databases. Not the same brand. Grouping and sorting fields come from both databases, so I can't just read one and retrieve data from the other. It seems to me I have to extract data from each data base using crystal reports, merge the two files using crystal reports and feed the merged file into crystal reports. I've not found a simpler or better method in the Crystal Reports documentation. Is there documentation about doing this process on the web site or with crystal reports documentation? My method seems cumbersome so I'm wondering if there is a better method.

Jeffrey,
A cheap and effective solution, for a periodic transfer would be using XML.
If you have the DDL for all of the objects in the database, you can just duplicate it on whatever RDBMS engine you want, and then, extract the data, table per table into XML files from the target server, and then load the files into the target server.
Otherwise, if you are going to do this in an ongoing basis, then, use SAP Replication Server. The best asynchronous, real time, heterogeous replication solution in the industry, exploited with a great deal of success by many critical mission financial applications with global topologies and sub second latency.
My two cents.
I hope they help.
Regards,
Jean-Pierre

What is best method to archive movies?

Appreciate any advice as to how to best transfer my iMovies off of my MacBook Pro running Mtn Lion, to an external device (thinking of a 1 or 2 GB G Drive) for archive purposes. Once my old VHS home movies are transfered & digital on iMovie, I'll edit a bit in "Project" & finalize them. I want to send both the final Projects & original film (Events?) to an external HD. I'm thinking of getting a 1tb G-Drive mobile as easier to move around BUT if someone feels it's more important to get a desktop G-Drive for video, due to having a fan over the mobile, then I would like to know before I make the purchase. In that case, I will go for 2 or 4 TB. I don't plan on editing from the external HD, I only want to archieve my movies there BUT also want the ability to move them back into iMovie in case I want to share them with someone. I assume that would have to be done via YouTube, which I have already used. Thanks for any tips. Pls note that I'm not computer savvy so no big tech terms; pls treat me like I'm in kindergarten with any replies! Tks! -Lynn

This isn't a Dreamweaver question as much as it is an SEO question.
Web searches reveal results based on content inside semantic HTML; not their URLs. So a link to index.html carries the same approximate weight as a link to http://yourdomain.com.
The main diff is that DW cannot manage absolute links for you. It can only manage links that are document or site root relative.
Nancy O.

What is best method to overcome jerky video export ?

Similar Messages

Maybe you are looking for