What is best network setting for jetpack mifi 5510l

I live in a rural area with poor signal.  No 4G and limited 3G.  We got an antenna that boosts phones from nothing or 1X one bar to 3G and 2-3 bars inside the house.  What is the best network setting for jetpack?  It doesn't seem to work as well. 
Automatic and 4g don't work.  I don't know what CDMA Auto or EDVO stand for. 
Any suggestions for improving strength would be appreciated.  I know I won't get a great connection but a steady connection sure would be great.

> What is the best network setting for jetpack?
Not sure what you mean.  The jetpack will automatically configure itself to whatever signal it currently has access to.  Shouldn't have to configure any network settings.
> I don't know what CDMA Auto or EDVO stand for.
Those are the old 3G networks.
> Any suggestions for improving strength would be appreciated.
Perform what is known as a Site Survey and evaluate your current environment:
http://3gstore.com/page/13_will_an_antenna_help_me.html
After you generate some numbers then look up what they mean in the Interpret the Results tab.  You mentioned that you already purchased an antenna so there may not be anything else you can do as the local towers in your area are not good enough to reach inside your home.

Similar Messages

  • What is the best Compressor setting for best quality video playback on an iBook g4?

    I know the iBook and G4's in general are very outdated today, but I need to ask anyways. I have some video projects in 720p and 1080p in which I have down converted to 480p and also exported to MPEG-2 for DVD (personal wedding videos and videos made for my clients using Final Cut Studio). Anything encoded at most resolutions using h264 won't play on my iBook. Even 480p.
    I have about 20 hours of mixed video content that I need it in a format that is suitable for an iPhone 4 and an iBook 12" with a 1.2GHz G4, 1.25GB RAM and I added a 250 WD 5400 IDE hard disk (running 10.5.8 and 10.4.11 for Classic Mode). I know the iBook doesn't seem like the best tool for modern video playback, but I need to figure out which setting will play best with iPhone 4 and iBook so I don't need to make 2 local copies of each video for each device.
    The iBook plays best with the original DVD output MPEG-2 file and playing back in QT Pro or VLC... but I already have 180 GB's of MPEG-2 files now and my little HD is almost full. I don't have enough room to convert all the iPhone 4 counterparts. If I use Compressor 3.5.3, what is the optimal setting for iBook and iPhone .m4v or .mp4 files that can play on both devices? So far 720x400-480 widescreen videos @ 29fps works great on my iPhone, Apple TV 2, and other computers but seems to murder my poor iBook if encoded with high profile (and still choppy on simple profiles). 640x480 (adding black matte bars to my videos) plays fine in MPEG-2 but drops frames or goes to black screen if I convert it to mp4 (and looks bad on the iPhone 4 because of the matte). But if I convert on any of the simple profiles, it looks terrible on my iPhone 4 and a blocky on the iBook.
    This is the problem leading me to having 2 copies of each video and eating my hard disk space. What is the best video setting for both playback on the iBook and iPhone 4? Can the iBook playback H264 at all in decent resolutionsat all? I don't really want to have a 480p .m4v collection for the iPhone 4 and a MPEG-2 RAW collection just to play the same videos on the iBook.
    Any suggestions are greatly appreciated! Thanks!

    Update: The iBook can play any 480p video and higher if I encode them with DivX and in AVI format. But of course this is not compatible with my iPhone 4. At least I can shrink my library now and get away from the full MPEG-2s. I don't get why I can't use Apple's h264 though. There has to be a setting I am missing. The sample Apple h264 videos from the days of Tiger worked flawlessly on my iBook when it was new so the CPU must be capable of decoding it. I really can't understand this.
    Also, since I made my videos in English for my family, I had to create soft subtitles for my wife's Chinese family, and I can't get players like QT with perian or MPlayerX to sync them properly to an AVI encoded with DivX, they only sync well with the iPhone 4 m4v/mp4 formatted files I made. This is a real pickle.
    So now I may need three or four copies of each video, LOL. I need to hardcode the subtitles if I want to use AVI to playback on older machines, and keep the mp4 file for the iDevices too, while keeping higher quality h264 videos for my American relatives...
    If h264 is compatible with my iBook, what is the proper encoding settings? Must I dramatically lower the settings or frame rate? I can settle on 2 copies of each video that way. One iBook/G4/eMac compatible video that syncs correctly with my srt soft subs, and another version that works well with my iPhone 4 and iPad.
    All in all, I will end up with more than 3 or 4 version of each video. On my late G5 dual core I have the full 720-1080p uncompressed master files. On my i5 iMac I have the h264 compressed versions for distribution, and lower versions for my iDevices. Now I need to keep either full MPEG-2 files for the iBook to play, or convert to older formats like DivX AVI for our family's legacy machines. I am running out of hard disk space quick now, LOL.
    Is there an easier way?

  • What is the best export setting for video on blogger

    What is the best export setting for video from premeire to blogger.com or blogspot.com

    I have not been able to find the technical limits/specs for the site Blogger or blogspot.com. That is why I made the post here thinking some Adobe users may have experimented already and come up with good export settings for AVI DV video to a format optimized for Blogger.

  • When you set up tracks what is best to pick for the input and output?

    When you set up tracks what is best to pick for the input and output? also what is the buss output? Thanks

    First part of the question I don't understand, so could you elaborate please?
    Second part: bus output is used for submixes, for example, let's say you want the same EQ to be applied to all guitars in the song, so instead of using same EQ plug-in on all guitar tracks, you feed the output from these tracks to a bus track and use the effect just once on this bus submix.

  • What is the best compressor setting for dvds

    What is the best compressor setting for dvds that is not for HD dvd players? I used "DVD Best quality 90 min" and changed the GOP setting to 7.5 and my dvd looks terrible. the text is blurry and the colors are bad.

    correction the bit rate is 7.5

  • Export Media from DV Pal to AVI: Best recommended setting for Output file?

    I have a project in CS4, on Windows, in DV format (original videos were M2t).
    What is the optimal setting for export (and possibly for the sequence settings too) for the best quality and then smallest size?
    If my input is M2T files - is the best settings to work in Premiere is DV 1 for Pal?
    I always use Progressive Interlace - is that required or is the default of Lower field OK as well (I am not sure exactly what is the impact of using just one field, but from previous versions of Premiere Progressive always improved the video image)?
    Is the frame rate of Pal as 25 FPS must be adhered in the sequence setting and export to avoid re-rendering?
    As for the Export side:
    Is using the DV Pal is best for quality without going uncompressed?
    Is starting with 16GB of DV as m2T and ending with 20GB of DV reasonable?
    Is the method of exporting to DV and then compressing it using a 3rd party is the best way going about the creation of the movie and then compressing it for distribution?
    What is the the recommended tool for compressing - and with which format?
    The end result is meant to be consumed as an AVI on people's desktop. Not on mobiles or YouTube or DVD.
    On BitTorrent I see many files that are in HD but have an amazingly small size of less 1 GB - what do these guys use to achieve such small sizes yet amazing quality?
    What is the best tool and codec to achieve a compression based on a file size?
    Is DivX better than XVid? And is "Multipass nth pass" is the way to configure the DivX for best results?
    I really feel we lack any guidance on these aspects and a huge of time is wasted every time I get to this stage when it should all be pretty standrad for me.
    I know I am asking a number of question but if someone is able to jot down the basics of the tool, codec and settings to achieve best quality (regardless of the time it takes to get to it) - I'd be very grateful!
    Merry Xmas and a Happy New year to all,
    Eroka00

    I find your post somewhat confusing.
    These m2t are they converted?
    Run a file that you are using in Prmeiere through Media Info and post a screendump.
    http://mediainfo.sourceforge.net/nl
    What is the endproduct going to be? YouTube, DVD, media player or .....

  • Best export setting for HD Video

    I am currently woriking with Final Cut Express HD and I am new to the whole HD experience. I would like to know what is the best exporting setting for FCE to be copied on DVD and viewed. I am currently working on a wedding project with a JVC Pro HD camera GY-HD110 720p. Any help will be appreciated. Thank You.

    This is a question better asked in the FCE forum located at the link below:
    http://discussions.apple.com/forum.jspa?forumID=936

  • What are the network requirements for the Remote Panel Server?

    What are the network requirements for the Remote Panel Server?
    I've been trying for a while now to setup a Remote Panel.  I can connect to my computers remote panel from other computers on my LAN but nowhere else.  
    When ever I use the web publishing tool it gives me a URL in this format:  http://Computer-Name.Corporate-Name.local:8086/VI-Name.html Apparently this means I have a local DNS server and this URL has no meaning from the public.
    When I try connecting with the Operate>>Connect to Remote Panel..., I get this error message:
    "Connecting to remote panel server...
    Remote panel connection refused by specified server: Make sure LabVIEW Web Server is enabled on specified server"
    I got the same error when I tried to host a remote panel from my laptop at home, on my Wi-Fi.  Is there some network or firewall setting I'm not seting?  Could it be my server or router or private network?
    My goal is to be able to host Remote Panels from my laptop while I am travailing internationally, by using 4G mobile internet.  Is that even passable?
    Solved!
    Go to Solution.

    Over_Nyquest
    Have you enabled the Remote Panel Server in the Web Server options on the server?
    Kyle B  |  Product Support Engineer  |  ni.com/support

  • HT3211 What is best track pad for laptop pro

    What is best track pad for Mac Pro laptop with mountain lion

    Honestly, the one right in front of your keyboard. It's hard to do better than that one, and the Magic Trackpad is just an external duplicate of that. In fact, my dad has one for his iMac, and I seem to recall that there are one or two things I can do with my built-in trackpad that he can't do with his Magic Trackpad... though my faulty memory means I couldn't tell you what those things are at this point.

  • Whats the BEST Deployment Practice for appsTier (2 Node) with RAC Database

    Hi All,
    Whats the BEST Deployment Practice for appsTier on Shared APPL_TOP between two application tier Nodes and a RAC Database.
    Regards
    Satish

    Satish,
    Could you elaborate; are you looking for how to distribute the tiers(forms, web, conc., etc.); are you asking about PCP (parallelt concurrent processing)..
    Regards,

  • What's the recommended setting for "Process memory usage" ("process virtual" in UI) for a 64-bit host on a 64-bit OS?

    Hi gurus
    In resource based throttling, what's the recommended setting for "Process memory usage" ("process virtual" in the resource based throttling tab of the UI) for a 64-bit host
    on a 64-bit Windows OS?
    According to MS (http://msdn.microsoft.com/en-us/library/ee308808(v=bts.10).aspx):
    "By default, the
    Process memory usage throttling threshold is set to 25. If this value is exceeded and the BizTalk process memory usage is more than 300 MB, a throttling condition may occur. On a 32-bit
    server, you can increase the Process memory usage value to 50. On a 64-bit server, you can increase this value to 100. This allows for more memory consumption by the BizTalk process before throttling
    occurs."
    Does this mean that 100 is the recommended setting for a 64-bit host on a 64-bit Windows?
    Thanks
    Michael Brandt Lassen

    Hi Michael,
    Recommended setting is the default setting which is 25 .dot.
    If your situation is abnormal and you see message delivery throttling state to “4” when the following performance counters are high or if you expect any of you integration
    process could have impact on following counters, then you can consider the suggestion by Microsoft. Don’t change the default setting.
    High process memory
    Process memory usage (MB)
    Process memory usage threshold (MB)
    You can see these counters under “BizTalk:MessageAgent”
    You can gauge these performance counter and its maximum values if have done any regression/performance testing in your test servers. If you have seen these counters having
    high values and causing throttling, then you can update the Process memory usage.
    Or unexpectedly you’re process high throughput messages in production which is causing these counters to go high and cause throttling, then up can update the Process memory
    usage.
    The above two cases where I know my expected process usage (by doing performance testing) or suddenly my production server processing has gone high due to unexpected business
    hike (or any reasons) which caused throttling, then do changes to default throttling setting.
    Just changing the default setting without actual reason could have adverse effect where you end up allocating 
    more processing capacities but the actual message processing message usage ever is low means you end up investing in underutilised resources.
    Regards,
    M.R.Ashwin Prabhu
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • Adobe flash player 11 doesen't works on 10.8.1! what can i do? whats the best flash player for mac?

    adobe flash player 11 doesen't works on 10.8.1! what can i do? whats the best flash player for mac?

    First try deleting Flash Player by carefully following the instructions on Adobe's website:
    http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html
    Then install it again from this location only:
    http://get.adobe.com/flashplayer/

  • MOVED: Best BIOS setting for MSI K8N Plat + AMD 3000+ Venice + Geil Value RAM

    This topic has been moved to AMD64 nVidia Based board.
    Best BIOS setting for MSI K8N Plat + AMD 3000+ Venice + Geil Value RAM

    If you want SSE3 support and you do not overclock, Bios 1.4 is the only one officially available (1.41beta is not official).
    Try to upgrade to 1.4 and see it for yourself, do the upgrade with floppy in DOS so that you can save your old Bios.
    I would rather wait till mid June when a less troublesome new bios is suppose to be availabe for NEO4 MBs.

  • Whats the best virus checker for a MAC

    whats the best virus checker for a MAC

    rkaufmann87 wrote:
    And I'm of the school that says no virus checker is needed. This assumes the user has a minor amount of common sense and does download illegal software, visits *********** sites and keeps OS X up-to-date by using Software Update regularly.
    I'm in almost full agreement with everything you've said except for the ************** sites part. Most current Mac malware comes from very ordinary and even top level sites these days. Flashback came from hundreds of main stream WordPress blog sites. The New York Times primary web site was spreading malware for 24 hours before it was discovered. Users can no longer feel confident of not being infected just because they avoid sketchy sites.

  • HT1569 what is the network password for the  ios7

    what is the network password for the  ios7?

    There is no network password! If you want to connect to a wifi hotspot which is password protected, you have to contact the administrator of the hotspot in order to learn the password. If you are the administrator, you should contact the technician who plugged in your router.if you aren't asking that, let me know so that I can help you!
    Hope I helped!

Maybe you are looking for