What is best NTSC shot in 16:9 DV setting in Final Cut Express

I working with FINAL CUT EXPRESS and usually the software will give me many options concerning the choice to make for DV; I am having trouble deciding which is the correct choice for producing the hights quality. I would appreciate any help. Thank youl.

DV - NTSC Anamorphic.
Al

Similar Messages

What are the best data and bit rate setting for uploading from final cut express to Youtube?

Can anyone suggest the best data rate and bit rate presets for uploading footage from final cut express 4 to Youtube? What settings will provide the best resolution, quality, and match the current youtube requirements?
Thank you in advance for your help,
Susan Kayne

It depends on whether you are using aspect ratios of 4:3 or 16:9.
Below is some simple guidance that will provide good quality with reasonably small file sizes.
The first part is for 4:3 video:-
1. File>Export Using QT Conversion.
2. The "Format" window should say, "QT Movie".
3. In "Use" select "LAN/Intranet" from the dropdown menu.
4. Click "Save" and when it has finished encoding, upload it to YouTube.
If you are making 16:9 video (Standard or High Definition) do steps 1 to 3 above.
Then when you have selected "LAN/Intranet" press the "Options" button and in the new
window that opens press the "Size" button and change the "640x480" to "853x480"
To do this you will have to click on the 640x480 and a dropdown menu appears.
Select "Custom" from the bottom of the menu and in the window that opens
you will see 2 boxes.
Put 853 in the first box and 480 in the second.
Click OK.
Then Save it.

What camcorder works best with Final Cut Express?

What camcorder works best with Final Cut Express?

Anything that's DV, HDV, or AVCHD and shhots in a format supported by the application.

What setting is the best for exporting Final Cut Express HD

I am new to final cut express HD. I have worked with iMovie and it was very easy to work with and exporting the movie was not too difficult.
I am curious as to what setting should I set to to export a movie file from final cut express HD. I've exported a short quicktime movie clip but it doesn't look as sharp. Could someone help me.

For DVD, export as Quicktime Movie NOT Quicktime Conversion.
You can drop the resulting QT file into iDVD or into Compressor if you are using DVD Studio Pro.
If you have chapter markers, make sure to select Chapter Markers in the export submenu.
Bear in mind that iDVD has a limitation of two hours; even if your movie is exactly two hours you will run into probs cause iDVD counts its menus, themes etc as part of that total running time.

What's the best camcorder for taking video to edit in final cut express?

I had a sony, but the file type was MTS and it required conversion to edit in Final Cut Express 3. So i sold it on ebay, and I'm looking to replace it. Does anyone have a set up that is easy to transfer HD video from their camera to their Mac, and edit those files right in Final Cut 3?
Thanks!
J

Not sure this is "rubbish" as you say Tom. FCE 4 has to take files directly from the camera. Works fine when I have the files I want to work with on the camera, does not work fine when I saved them to my hard drive, and want to import them later.
In case you don't believe my personal experience, here's another souce that has had the same conslusion:
"Incidentally, Final Cut Express will not transcode the native .MTS files directly; it needs to take the footage from the camcorder. However, a $30 utility called Voltaic can do the job outside Final Cut Express; it works on PowerPC Macs, too."
http://www.macworld.com/article/131409/2008/01/finalcutexpress4.html
To Mr. Fore, I believe you are correct, it works fine to pull right from the camera, no issue there. Issue comes in when I just want to dump video to my local hard drive and clean out the camera's hard drive so I can keep shooting, and come back at a later date to edit and clean up the old footage. I end up having to import everything from the camera to Final Cut Express 4, which is time consuming, rather than just drop the files on to my hard drive.
What I would like to know, is there a camcorder out there that saves files in a format that I can drop on my local hard drive, and then pull into FCE later. I would love to hear from someone who has done that, what camera they are using.

Best export method of footage from Final Cut Express to DVD?

I'm exporting footage from Final Cut Express using Quicktime Player and then burning the footage to DVD using iDVD.
The end result on DVD has very jagged interlacing (or noise) on objects in motion which aren't present when viewing the footage on FC. I don't think the problem is with iDVD (I assume I'm burning a pristine copy of an already reduced-quality clip).
Are there any changes I can make to the system preferences either on FC or Quicktime Player to reduce or prevent loss of digital information, or can anyone suggest better methods of export from Final Cut Express to DVD?

Hello
I'm not sure if this is relevant:
I've been using the Quicktime Conversion settings;
http://www.locationstudio.net/Settings.jpg
29.97 Frame Rate
Highest Quality
NTSC/PRO
I was under the impression that this was usually best - haven't had any problems with iDVD
Mike

I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD.

I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD. Also, I can not afford an expensive camera and need some advice on which of the available cameras would be best and also work well with a Mac. One last issue, I currently use a Panasonic #CCD camera that takes a tape. When I load video to Final Cut the audio and video are out of sinc. Go figure. Can anyone help with these questions. Karen

Hello Karen,
If you are using Final Cut Express, then look for camcorders that are AVCHD camcorders. Look especially for the AVCHD logo and specific mention of AVCHD in the specs. Most of the major manufacturers produce good quality camdcorders - Canon, Sony, etc.
Also, be aware that there are a lot of "not quite AVCHD" camcorders on the market (sometimes they say they record video as MPEG4-H.264/AVC) - buyer beware!
Most everything you are going to find on the market today is HD, which stands for "high-def".
Regarding your question about the Panasonic camcorder, it's best if you post that as a separate question, and please identify the specific model camcorder and the Easy Setup you are using in FCE.

How do I export a final cut express movie in both PAL & NTSC formats?

I am wanting to provide both a NTSC and PAL verion of a movie onto a DVD, how can I do this using final cut express?

Ok, I have successfully converted a DV-NTSC video to DV-PAL using Nattress Standards Conversion in FCE. The resulting output file (a self-contained QT movie) verfied as PAL in QuickTime movie inspector, 720x576 at 25fps and it plays perfectly, the video looks great, and the sound is in sync.
I had to figure out a workaround for one step in the documentation (Graeme uses an FCPro feature called 'nest items' that doesn't exist in FCExpress. I got around that by manually creating a second PAL sequence instead - see below).
If you're starting with an NTSC video, the basic procedure I used is this:
1 - create a PAL sequence and place the NTSC clip in that sequence (yes, that's right)
2 - create a second PAL sequence (add the word NEST to the name so you can tell which sequence is which)
3 - nest the first PAL sequence in the second PAL sequence
4 - open the second PAL sequence (the NEST) in the viewer by Control-clicking its timeline and select +Open in Viewer+
5 - apply the G Converter filter to the NEST (which is now open in the Viewer)
6 - click the filters tab in the Viewer so you can see the G Converter filter
7 - drag the +original NTSC clip+ from the Browser to the +Source Clip well+ in the filter
8 - verify that the other G Converter settings are what you need, especially that you have checked "Nested", "High Quality" and "Source is NTSC-DV" and that the convert setting is NTSC->PAL (these are the defaults, but you should verify them anyway)
9 - render the NEST sequence ... +this may take as long or longer than the length in time of your sequence+
10 - export the NEST sequence as a self-contained QT movie ... which will now be a PAL movie
One other note, the Standards Conversion filters need to be copied to the +Library > Application Support > Final Cut Express Support > Plugins+ folder (not the Final Cut Pro Support > Plugins folder as specified in the documentation)
If you are going to try this with your project, I suggest the following:
1 - edit your movie in an NTSC sequence. After completing all your edits (when you are done editing) export it as a +self-contained QT movie+ (it will be an NTSC movie)
2 - re-import the exported NTSC movie back into FCE (it will now be your complete movie as one large clip)
3 - follow the instructions above for using the G Converter filter to create the PAL version of your movie (using the re-imported movie as the only clip you will put in the first PAL sequence, and in the Source Clip well in the converter filter.)
You can use your first export (the self-contained NTSC movie) to create your NTSC DVDs; and the second export (the self-contained PAL movie) to create your PAL DVDs.

Best export for dvd quality using final cut express hd?

hey guys
i have final cut express hd...what would be the best export settings to get nice highquality dvd?
i am going to put about 25, short 5 minute clips in the dvd..will it be able to fit and all be a nice quality?
any suggestions?
thankyou!

Yes, provided you use dual layer DVD-R and your burner supports this newer media.
Otherwise the most you can burn to DVD-R SL media is 120 mins. (but keep in mind menus, titles, photos, etc all consume space as well thereby reducing the available amount of run time / QT Playback.

Best Settings using the new Canon HV30 and Final Cut Express HD v3.5.1?

My wife presents programs at schools and uses digital movies that we make and edit as one of her media materials. We want to present higher quality videos that look more film-like. I am hoping that the combination I described above will enable this improvement. In the past we used a Canon ZR20 and iMovie HD and put these on DVD's that were then played on a MacBook Pro with with QuickTime or iDVD hooked up to an Epson PowerLite projector.
I am now the proud owner of a new Canon HV30 and Final Cut Express HD3.5.1 (had FCE for a while so know how to use it). From my research, though, it looks like FCE will not be able to handle CINE MODE recording in combination with 24fps progressive frame rate [HDV(PF24)] which would allow the enhanced effect of the Cinema Mode. I can't justify the cost of Final Cut Studio 2 so I am hoping that the new [HDV(PF30)] will allow me to more easily edit in FCE.
Does anyone know if this is true and if so can please tell me the settings that I need both on the camera and in FCE to get the best quality movie that can played directly from my MacPro using QuickTime or iDVD or from a DVD in the MacPro using the iDVD player. I won't have the opportunity to always play the videos directly from the camera to an HDTV because of the school setting and the need to use a projector.
I know this is a lot to ask for, but I am sure that it will come up again and again as more people purchase this new camera. Thanks for your time.
Sincerely,
Lou Hosta

Without totally repeating myself with my post to MaccyLeopard, I haven't shot any footage yet. After doing a lot of reading I think I confused myself more than helped myself as far as settings go. So if you remember from my initial post I am asking for advice and guidance primarily on camera settings with the HV30 that will be used in a classroom (artroom) setting and then edited using FCE HD v3.5.1. I wish I was the type of person that could jump right into using a new piece of equipment but I like to get the advice of others beforehand. That way I'm not always questioning myself as to 'whether or not is this the best I can get'. I also am wondering if the 30fps frame mode would be the best to use in the classroom setting? From my reading, this mode should allow more light onto the tape allowing me to shoot in conditions with lower light levels that are typically found inside? Finally, is FCE HD able to edit this new 30 fps frame mode of the HD30? I've heard that FCE HD can't handle the 20 fps frame mode.
Thanks for taking the time to help me out.
Sincerely,
Lou Hosta

Final Cut Express and HVX200P - Best Possible Format?

From reading all the posts I think FCE wasn't a good use of money paired with my HVX200P.
In a pinch (the pinch is today) what is the best quality I can get out of my HVX200P and still edit in Final Cut Express?
If I wanted to shoot HD and convert it to something FCE could see what would you suggest? Format to shoot/Converter.
Thx

Capturing with Firewire from the camera, the best you can do is DV25,
in other words, the twentieth-century miniDV standard-definition format.
So it's like you have a DVX100.
Sorry about that.

What CD digital format to work with in Final Cut Express

I am having reel to reel AUDIO tapes(circa 1960) transferred to digital format by a third party vendor. What digital format should I request (audio CD's?) back, so that I can work with it using Final Cut Express(3.5.1).

The best format would be AIFF files @48kHz. Regular audio CDs are 44.1kHz. You can convert audio from CDs in QuickTime Player. (You might need QTPro; I'm not sure.)

When I move high quality clips into my timeline in Final Cut Express HD, they look and export low quality. I have tried converting the clips and de-interlacing them, but they always look the same, What is the problem? Thanks so much.

When I move high quality clips into my timeline in Final Cut Express HD, they look and export low quality. I have tried converting the clips and de-interlacing them, but they always look the same, What is the problem? Thanks so much.

You should check that the Project settings match the clip settings before editing them to the Timeline.
Only newly created Projects will change not existing ones by adjusting the Project settings.
If, for example, you have a Project set to NTSC DV you can only end up in trouble if the clips are PAL 1920 x 1080i.
Al

Best hard drive performance on mac pro for final cut express

This week I'll be setting up a basic 4 core mac pro with 16 gb ram and 2 internal- 2tb WD Caviar Black drives. I'm wondering what would give me the best performance for running final cut express, and I'm considering setting up software raid 0 or using one drive for boot and one for scratch. Or should I set up software raid 0 with boot and scratch partitions? Or other suggestions? Thanks.

My recommendations -
With 2 drives in your Mac Pro, use *one disk for OS X and all of your apps;* the *second disk for data* (including your FCE scratch disk location). Partition each drive as a *single partition,* which will maximize performance over time.
In addition, you should invest in at least 1 external drive to use for backup purposes; if you don't, the day will come when you wish you had.
I strongly recommend AGAINST doing software RAID. Certainly not for your situation with only 2 drives, one of which will be your system HD; but also because hardware RAID is faster, more reliable, and does not require CPU resources to run.
Your internal SATA drives will provide plenty of performance for most video editing needs. You also have the ability to put 4 drives in your Mac Pro, in which case you can utilize the extra drives to provide additional performance if/when you get into serious multi-multi track video compositing.

I have been creating a film on Final Cut Express and half of my film has disappeared- what can I do to retrieve it back!?

I have been creating a film on Final Cut Express and half of my film has disappeared! What can I do to retrieve it?! Furthermore, command Z doesn't appear to be working! Any help would be much appreciated!

Check the capture/scratch disc to make sure the media is still there. If it isn't your hard drive may be going bad. If it is, then you may have inadvertently cut part of the video from the Timeline or deleted it from the Browser.
As for the Command z issue, see how many levels of undo you have set in FCE preferences. Also keep in mind that Command z will not work if you close the project and reopen it.
-DH

What is best NTSC shot in 16:9 DV setting in Final Cut Express

Similar Messages

Maybe you are looking for