What is best practice for integration with freight forwarders?

Hello,
We are looking into the possibilities for automatically exchanging data with one of our freight forwarders. We will send them our shipment information and they will send back shipment status and date information including some additional information like the house bill. Sending the shipment data from our SAP (ECC 6) system is no issue, we have done that before. What is new to us is receiving back the status updates from the forwarder. Is there a kind of best practice of where to store this information on the shipment (or in a separate tabel) and what standard function module or BADI to use for this?
We are using ECC 6.0 sales and distribution, but no transportation management or SCM modules.
Would, like to hear the experiences of people who have done this type of intergration with their forwarders.
Regards,
Ed

SAP have added SAP TM 8.10 as a separate package which is also integrated with R/3 which means, a separate server is required if SAP TM needs to be implemented which will take care of your expectations. For more information on this, search in Google so that you will get couple of documentations on this topic.
G. Lakshmipathi

Similar Messages

What is best practice for dealing with Engineering Spare Parts?

Hello All,
I am after some advice regarding the process for handling engineering spare parts in PM. (We run ECC 5)
Our current process is as follows:
All materials are set up as HIBE's
Each material is batch managed
The Batch field is used for the Bin location
We are now looking to role out PM to a site that has in excess of 50,000 spare parts and want to make sure we use best practice for handling the spare parts. We are now considering using a basic WM setup to handle the movement of parts.
Please can you provide me with some feedback on what you feel the best practice is for dealing with these parts?
We are looking to set up a solution that will us to generate pick lists etc and implment a scanning solution to move parts in and out of stores.
Regards
Chris

Hi,
I hope all the 50000 spare parts are maintained as stock items.
1. Based on the usage of those spare parts, try to define safety stock & define MRP as "Reorder Point Planning". By this, you can avoid petty cash purchase.
2. By keeping the spare parts (atleast critical components) in stock, Planned Maintenance as well as unplanned maintenance will not get delayed.
3. By doing GI based on reservation, qty can be tracked against the order & equipment.
As this question is MM & WM related, they can give better clarity on this.
Regards,
Maheswaran.

Best practice for dealing with Recordsets

Hi all,
I'm wondering what is best practice for dealing with data retrieved via JDBC as Recordsets without involving third part products such as Hibernate etc. I've been told to NOT use RecordSets throughout in my applications since they are taking up resources and are expensive. I'm wondering which collection type is best to convert RecordSets into. The apps I'm building are webbased using JSPs as presentation layer, beans and servlets.
Many thanks
Erik

There is no requirement that DAO's have a direct mapping to Database Tables. One of the advantages of the DAO pattern is that the business layer isn't directly aware of the persistence layer. If the joined data is used in the business code as if it were an unnormalized table, then you might want to provide a DAO for the joined data. If the joined data provides a subsiduray object within some particular object, you might add the access method to the DAO for the outer object.
eg:
In a user permissioning system where:
1 user has many userRoles
1 role has many userRoles
1 role has many rolePermissions
1 permission has many rolePermissions
ie. there is a many to many relationship between users and roles, and between roles and permissions.
The administrator needs to be able to add and delete permissions for roles and roles for users, so the crud for the rolePermissions table is probably most useful in the RoleDAO, and the crud for the userRoles table in the UserDAO. DOA's also can call each other.
During operation the system needs to be able to get all permissions for a user at login, so the UserDAO should provide a readPermissions method that does a rather complex join across the user, userRole, rolePermission and permission tables..
Note that f the system I just described were done with LDAP, a Hierarchical database or an Object database, the userRoles and rolePermissions tables wouldn't even exist, these are RDBMS artifacts since relational databases don't understand many to many relationships. This is good reason to avoid providing DAO's that give access to those tables.

Best practice for integrating oracle atg with external web service

Hi All
What is the best practice for integrating oracle atg with external web service? Is it using integration repository or calling the web service directly from the java class using a WS client?
With Thanks & Regards
Abhishek

Using Integration Repository might cause performance overhead based on the operation you are doing, I have never used Integration Repository for 3rd Party integration therefore I am not able to make any comment on this.
Calling directly as a Java Client is an easy approach and you can use ATG component framework to support that by making the endpoint, security credentials etc as configurable properties.
Cheers
R
Edited by: Rajeev_R on Apr 29, 2013 3:49 AM

What is best practice for installing Yosemite

I am currently on OS X Mavericks version 10.9.5 Macbook pro 13. 2.6 ghz intel for i5, 8gb 1600 mhz ddr3.
I am now downloading yosemite 10.10.1 but since i've been reading all these negative feedback so far, i am having second thoughts if i should continue to install the upgrade or not.
Any suggestion What is best practice for installing Yosemite? Or is it not yet time to upgrade since the platform is premature yet?
Thanks in advance.

Check your apps are compatible with 10.10 - roaringapps.com
http://www.etresoft.com/etrecheck can show what is running & installed - look for updates on the developer own sites.
If you have many kernel extensions or startup items look for updates to them too
Take a full bootable backup to another disk via Carbon Copy Cloner, Super Duper! or Disk Utility
Disconnect the backup before you begin any install (ideally set it aside & leave it untouched incase you need to go back to 10.9)
Personally I prefer a clean install when there are signs of multiple migrations (if you have upgraded several OS for a period of years). Setup Assistant/ Migration Assistant can import user data from a backup, but consider that Apps & 'other data' should be manually reinstalled from the latest versions.
If you clean install (erase the HD before installation) then make sure you deauthorise iTunes & any other apps that are associated online (like find my Mac).
Basically the steps you would take before selling a Mac…
What to do before selling or giving away your Mac - Apple Support

Best practices of integration with SAP Netweaver

Hi All,
I'm totally new to SAP Netweaver but I have a task to integrate our system with SAP ECC (R/3). We are using SAP Netweaver 6.4. The goal of integration is to provide for user list of available modules (Sales and Distribution, Human Resource, Payroll, etc) and when user selected for example Payroll we need to display list of available BAPIs. In general weare able to create Enterprise Web Service for some BAPI and consume it. But the problem is that everytime when administrator changed BAPI process (for example added new field to Business Object) we need to regenerate wsdl and change our client application. Does Netweaver provide some Web Service which can retrieve list of applications, list of BAPI processes and can retrieve meta data of some BAPI? Something like Partner Web Service interface?
We are looking for best practices of integration with SAP Netweaver. We are trying to develop something like adapter which will be able to pull data into SAP ECC system is there any generic way to develop this adapter?
Thanks in advance for your help.
Yura.

Hi Yura !!
As far as I know, this is not possible yet. Using SAP Netweaver XI/PI, although it adds value to the webservice scenario exposing BAPI functionality, it also needs to maintain a refreshed version of the BAPI definition in its repository. Depeding the complexity of the change in the BAPI structure, maybe PI may allow you to continue working without changes.
Maybe a good practice is not to make too much changes to a production BAPI, instead make a review in development environment, and once it is stable, use it in production. Other good practice is to keep older versions of BAPIs and add the changed ones as new versions to have back-compatibility
Regards,
Matias.

What are best practices for managing my iphone from both work and home computers?

What are best practices for managing my iphone from both work and home computers?

Sync iPod/iPad/iPhone with two computers
Although it isn't possible to sync an Apple device with two different libraries it is possible to sync with the same logical library from multiple computers. Each library has an internal ID and when iTunes connects to your iPod/iPad/iPhone it compares the local ID with the one the device normally syncs with. If they are the same you can go ahead and sync...
I have my library cloned to a small 1Tb USB drive which I can take between home & work. At either location I use SyncToy 2.1 to update the local copy with the external drive. Mac users should be able to find similar tools. I can open either of the local libraries or the one on the external drive and update the media content of my iPhone. The slight exception is Photos which normally connects to a specific folder on a specific machine, although that can easily be remapped to the current library if you create a "Photos" folder inside the iTunes Media folder so that syncing the iTunes folders keeps this up to date as well. I periodically sweep my library for new files & orphans withiTunes Folder Watch just in case I make changes at one location but then overwrite the library with a newer copy from the other. Again Mac users should be able to find similar tools.
As long as your media is organised within an iTunes Music or Tunes Media folder, in turn held inside the main iTunes folder that has your library files (whether or not you let iTunes keep the media folder organised) each library can access items at the same relative path from the library folder so the library can be at different drives/paths on different machines. This solution ensures I always have adequate backups of my library and I can update my devices whenever I can connect to the same build of iTunes.
When working with an iPhone earlier builds of iTunes would remove any file not physically present in the local library, even if there was an entry for it, making manual management practically redundant on the iPhone. This behaviour has been changed but it will still only permit manual management with a library that has the correct internal ID. If you don't want to sync your library between machines on a regular basis just copy the iTunes Library.itl file from the current "home" machine to any other you want to use, then clean out the library entires and import the local content you have on that box.
tt2

What is best practice for...

What is best practice for deploying applications through the IPCU to 10 ipads?
I'm looking for a complete step-by-step of the best way to do this.
Thanks in advance!

Just place a modem into any console port. Ideally you use a terminal server, but is not always really needed.

What's best practice for logging messages in pageflow?

What's best practice for logging messages in pageflow?
Workshop complains when I try to use a Log4J logger by saying it's not serializable. Is there a context similar to JWSContext that you can get a logger from?
There seems to be a big hole in the documentation on debug logging in workflows and JSP pages.
thanks,
Rodger...

Make the configuration change in setDomainEnv.cmd. Find where the following variable is set:
LOG4J_CONFIG_FILE
and change it to your desired path.
In your Global.app class, instantiate a static Logger like this:
transient static Logger logger = Logger.getLogger(Global.class);
You should be logging now as long as you have the categories and appenders configured properly in your log4j.xml file.

Best practice for integrating a 3 point metro-e in to our network.

Hello,
We have just started to integrate a new 3 point metro-e wan connection to our main school office. We are moving from point to point T-1?s to 10 MB metro-e. At the main office we have a 50 MB going out to 3 other sites at 10 MB each. For two of the remote sites we have purchase new routers ? which should be straight up configurations. We are having an issue connecting the main office with the 3rd site.
At the main office we have a Catalyst 4006 and at the 3rd site we are trying to connect to a catalyst 4503.
I have attached configurations from both the main office and 3rd remote site as well as a basic diagram of how everything physically connects. These configurations are not working ? we feel that it is a gateway type problem ? but have reached no great solutions. We have tried posting to a different forum ? but so far unable to find the a solution that helps.
The problem I am having is on the remote side. I can reach the remote catalyst from the main site, but I cannot reach the devices on the other side of the remote catalyst however the remote catalyst can see devices on it's side as well as devices at the main site.
We have also tried trunking the ports on both sides and using encapsulation dot10q ? but when we do this the 3rd site is able to pick up a DHCP address from the main office ? and we do not feel that is correct. But it works ? is this not causing a large broad cast domain?
If you have any questions or need further configuration data please let me know.
The previous connection was a T1 connection through a 2620 but this is not compatible with metro-e so we are trying to connect directly through the catalysts.
The other two connection points will be connecting through cisco routers that are compatible with metro-e so i don't think I'll have problems with those sites.
Any and all help is greatly welcome ? as this is our 1st metro e project and want to make sure we are following best practices for this type of integration.
Thank you in advance for your help.
Jeff

Jeff, form your config it seems you main site and remote site are not adjacent in eigrp.
Try adding a network statement for the 171.0 link and form a neighbourship between main and remote site for the L3 routing to work.
Upon this you should be able to reach the remote site hosts.
HTH-Cheers,
Swaroop

What is best practice for conditional rendering?

i have a set of radio buttons that conditionally render another set, which in turn conditionally render a 3rd set.
i am doing this by using a valueChangeListener on an h:selectOneRadio
when i click yes on the 1st set it renders the 2nd set.
when i click yes on the 2nd set it renders the 3rd set.
when i click no on the 1st set now it correctly removes the 2nd & 3rd sets, the method also nulls the values.
when i click yes on the 1st set, it renders the 2nd set with the old values even though they were nulled. and i can see in the debugger they are still null.
so there seems to be an issue updating the model, but i dont know what that issue is. im sure it just has something to do with the way i am trying this conditional render. please see below for my first field and my valueChangeListener method.
any help with what is a best practice for this scenario would be greatly appreciated.
<h:panelGrid id="grid20a" columns="1">
                         <h:outputText value="Does this consult pertain to a specific "/>
                         <h:outputText value="planned or ongoing research project?: *"/>
                    </h:panelGrid>
                    <h:selectOneRadio id="specificResearch1" value="#{ethicsConsultBacking.bean.specificResearch}"
                         layout="lineDirection" required="true"
                         valueChangeListener="#{ethicsConsultBacking.processValueChangeSpecificResearch}">
                              <f:selectItems value="#{ethicsConsultBacking.yesNoMap}" />
                              <a4j:support event="onclick" reRender="form"/>
                    </h:selectOneRadio>
                    <h:message for="specificResearch1" styleClass="redText" />
public void processValueChangeSpecificResearch(ValueChangeEvent e) throws AbortProcessingException
          String newValue = e.getNewValue().toString();
          //reinitialize
          this.setRenderHumanSubjectResearch(false);
          this.setRenderIrbSection(false);
          this.setRenderIrbProtocolNumber(false);
          this.getBean().setHumanSubjectResearch(null);
          this.getBean().setPrimaryIrb(null);
          this.getBean().setIrbStatus(null);
          this.getBean().setIrbProtocolNumber(null);
          //check condition
          if (newValue.equalsIgnoreCase(this.YES))
               this.setRenderHumanSubjectResearch(true);
           * Clearing validation messages.
           * This will get around the issue with having a field
           * on the form that is both required & immediate.
          Iterator it = this.getFacesContext().getMessages();
          while (it.hasNext())
               it.next();
               it.remove();
          this.getFacesContext().renderResponse();
     }i also tried doing this another way by just using an action method attached to the a4j:support tag, but that introduced a different set of issue. so ill leave that out for now unless that is the direction someone would like to direct my issue in.
Thanks in advance

Similar issue is covered and explained here: [http://balusc.blogspot.com/2007/10/populate-child-menus.html]. Not sure if it solves your problem as you're using ajax4jsf whereas I don't, but it might give new insights. To the point you might need to bind the component(s) and use setValue(null) or setSubmittedValue(null).

What are best practice for packaging and deploying j2EE apps to iAS?

We've been running a set of J2EE applications on a pair of iAS SP1b for about a year and it has been quite stable.
Recently however we have had a number of LDAP issues, particularly when registering and unregistering applications (registering ear files sometimes fails 1st time but may work 2nd time). Also We've noticed very occasionally that old versions of classes sometimes find their way onto our machines.
What is considered to be best practice in terms of packaging and deployment, specifically:
1) Packaging - using the deployTool that comes with iAS6 SP1b to package is a big manual task, especially when you have 200+ jsp files. Are people out there using this or are they scripting it with a build tool such as Ant?
2) Deploying an existing application to multiple iAS's. Are you guys unregistering old application then reregistering new application? Are you shutting down iAS whilst doing the deployment?
3) Deploying ear files can take 5 to 10 mins, is this normal?
4) In a clustered scenario where HTTPSession is shared what are the consequences of doing deployments to data stored in session?
thanks in asvance for your replies
Owen

You may want to consider upgrading your application server environment to a newer service pack. There are numerous enhancements involving the deployment tool and run time layout of your application that make clear where you're application is loading its files from.
If you've at a long running application server environment, with lots of deployments under your belt, you might start to notice slow downs in deployment and kjs start time. Generally this is due to garbage collecting in your iAS registry.
You can do several things to resolve this. The most complete solution is to reinstall the application server. This will guarantee a clean ldap registry. Of course you've got to restablish your configurations and redeploy your applications. When done, backup your application server install space with the application server and directory server off. You can use this backup to return to a known configuation at some future time.
For the second method: <B>BE CAREFUL - BACKUP FIRST</B>
There is a more exhaustive solution that involves examining your deployed components to determine the active GUIDS. You then search the NameTrans section of the registry searching for Applogic Servlet *, and Bean * entries that represent your previously deployed components but are represented in the set of deployed GUIDs. Record these older GUIDs, remove them from ClassImp and ClassDef. Finally remove the older entries from NameTrans.
Best practices for deployment depend on your particular environmental needs. Many people utilize ANT as a build tool. In later versions of the application server, complete ANT scripts are included that address compiling, assembly and deployment. Ant 1.4 includes iAS specific targets and general J2EE targets. There are iAS specific targets that can be utilized with the 1.3 version. Specialized build targets are not required however to deploy to iAS.
Newer versions of the deployment tool allow you to specify that JSPs are not to be registered automatically. This can be significant if deployment times lag. Registered JSP's however benefit more fully from the services that iAS offers.
2) In general it is better to undeploy then redeploy. However, if you know that you're not changing GUIDs, recreating an existing application with new GUIDs, or removing registered components, you may avoid the undeploy phase.
If you shut down the KJS processes during deployment you can eliminate some addition workload on the LDAP server which really gets pounded during deployment. This is because the KJS processes detect changes and do registry loads to repopulate their caches. This can happen many times during a deployment and does not provide any benefit.
3) Deploying can be a lengthy process. There have been improvements in that performance from service pack to service pack but unfortunately you wont see dramatic drops in deployment times.
One thing you can do to reduce deployment times is to understand the type of deployment. If you have not manipulated your deployment descriptors in any way, then there is no need to deploy. Simply drop your newer bits in to the run time space of the application server. In later service packs this means exploding the package (ear,war, or jar) in to the appropriate subdirectory of the APPS directory.
4) If you've changed the classes of objects that have been placed in HTTPSession, you may find that you can no longer utilize those objects. For that reason, it is suggested that objects placed in session be kept as simple as possible in order to minimize this effect. In general however, is not a good idea to change a web application during the life span of a session.

New mac - what is best practice for accounts?

I am about to get a new mac (imac g5), and would like it to work well (ie file transfer and backup to from) my existing powerbook.
Is there a best practice for account set up? should I use the same accounts between the two or can I set up a new account on the new mac?
Related to this: what will key change sync give me? does that only work with the same accounts on two macs?
thanks
John

With Tiger there is a migration assistant that will move everything over from your Powerbook to your new iMac G5. All you need is a firewire cable and when prompted in your first start-up select migration assistant and connect the two computers. You will need to boot up your Powerbook holding down the 't' key before you connect the two together. Good luck, Jack.

What's best strategy for dealing with 40+ hours of footage

We have been editing a documentary with 45+ hours of footage and presently have captured roughly 230 gb. Needless to say it's a lot of files. What's the best strategy for dealing with so much captured footage? It's almost impossible to remember it all and labeling it while logging it seems inadequate as it difficult to actually read comments in dozens and dozens of folders.
Just looking for suggestions on how to deal with this problem for this and future projects.
G5 Dual Core 2.3 Mac OS X (10.4.6) 2.5 g ram, 2 internal sata 2 250gb

Ditto, ditto, ditto on all of the previous posts. I've done four long form documentaries.
First I listen to all the the sound bytes and digitize only the ones that I think I will need. I will take in much more than I use, but I like to transcribe bytes from the non-linear timeline. It's easier for me.
I had so many interviews in the last doc that I gave each interviewee a bin. You must decide how you want to organize the sound bytes. Do you want a bin for each interviewee or do you want to do it by subject. That will depend on you documentary and subject matter.
I then have b-roll bins. Sometime I base them on location and sometimes I base them on subject matter. This last time I based them on location because I would have a good idea of what was in each bin by remembering where and when it was shot.
Perhaps, you weren't at the shoot and do not have this advantage. It's crucial that you organize you b-roll bins in a way that makes sense to you.
I then have music bins and bins for my voice over.
Many folks recommend that you work in small sequences and nest. This is a good idea for long form stuff. That way you don't get lost in the timeline.
I also make a "used" bin. Once I've used a shot I pull it out of the bin and put it "away" That keeps me from repeatedly looking at footage that I've already used.
The previous posts are right. If you've digitized 45 hours of footage you've put in too much. It's time to start deleting some media. Remember that when you hit the edit suite, you should be one the downhill slide. You should have a script and a clear idea of where you're going.
I don't have enough fingers to count the number of times that I've had producers walk into my edit suite with a bunch of raw tape and tell me that that "want to make something cool." They generally have no idea where they're going and end up wondering why the process is so hard.
Refine your story and base your clip selections on that story.
Good luck
Dual 2 GHz Power Mac G5 Mac OS X (10.4.8)

What is best practice for deploying agent(10204) on RAC 9i

Hello,
What would be best practice for deploying agent(10204) on RAC 9i? Should the agent be deployed on each node or should the agent be deployed on the cluster file system? What are the advantages/disavantages deploy on individual nodes vs. on cluster file system? Please advice. Thank you in advance.

Please use agent push application to deploy agent on all the nodes at one shot
Please refer the obe
http://www.oracle.com/technology/obe/obe10gemgc_10203/agentpush/agentpush.htm

What is best practice for integration with freight forwarders?

Similar Messages

Maybe you are looking for