What is best way to handle editing long clips in Final Cut Pro?

I had to import some footage which contained timecode breaks as one continuous clip. I now have several ultra-long clips. What's the best way to chop out the bits I need and place them in a separate bin for the edit?

Hi -
Put the clip in the viewer. Mark an In point where you want your subsection to start and an outpoint where you want it to end. Type Command + U to make a subclip in you browser.
Repeat as necessary.
MtD

Similar Messages

Best way to export from Motion 2 into Final Cut Pro 5, working in DV?

I am working in DV in Final Cut Pro 5, and I would like to get the best quality from anything I bring in from Motion 2 into Final Cut Pro 5, I keep hearing use the Animation codec. I would like to hear from the Panel of experts.
Happy Thanksgiving,
Sebastian

The Best way is to round-trip from FCP. Or simply import the .motn file directly into FCP. If you require an alpha channel and for some reason don't want to bring the .motn file in, Animation with millions+ for the colors (+ is the alpha channel) will work, But if you just want straight DV, you should export a DV file.
Patrick

How to apply 3 way color correction to multiple clips in Final Cut Pro?

I have multiple clips from the same time and space footage that need color correction. I have worked on one of the clips and found the settings I like.
Is there a way to apply that correction to other clips without starting from scratch on each one?
Thanks!

SoCal (above) listed one way. Another way you can do it if you like the color correction that you have done and want to save it, you can click the picture of the hand in the color correction tab and drag it into the browser. This saves that specific arrangement of colors, highlights, etc.
Also, this might be a little easier but instead of pasting attributes and right clicking you can just grab the hand (that I just talked about) and drag it onto the clips you want to apply the same color correction to. The hand is located in the color correction tab (in viewer) and is under the "numeric" button.
Note: All of your clips in your timeline will have different contrasts, brightness, colors, etc. NO clip is going to have the EXACT same attributes as another. It doesn't matter how expensive and professional your camera is. Every shot is different whether you are using artificial lighting or the natural lighting. Having that said, you will probably still need to adjust your different clips a little bit to make them look like they are in the same room at the same time. Hopefully if your lucky or had perfect lighting for all of your shots, you will not have to do much messing around with your contrast, brightness, etc. Good luck!

TS1846 I have edited a movie in Final Cut Pro and the video has been smoot all the time. Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies. What is wrong? Sudd

I have edited a movie in Final Cut Pro and the video has been smooth all the time.
Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies.
What is wrong? All the sudden.

We need info, info, info!
What version of FCP X?
Did you render? what are the project specs? do you use many compound clips? how much ram, hard drive space, how is the hard drive connected?
It looks like your mac can't keep up. Maybe the bottleneck is the hard drive, or something else.
Try exporting a master file and see if the video is ok.
Also, keep Activity Monitor open and see how much memory pressure you've got.

What is the best way of compressing a large 3 hour final cut file

What is the best way of compressing a large 3 hour final cut file. I shot the play and it is in final cut and I rndered it so now I have a 22gb file that I need to put on a dvd . Any suggestions
Thanks
Macbook Pro
2.3 GHz Intel Core i7
with Final Cut Pro 7.0.3
using Lion as operating system

Presuming your menus aren't complicated(include audio or video) the total size for the MPG-2 and AC3 files should probably be under 8GB for a dual layer disk. The inspector will tell you the estimated size. 2-pass varible bit rate would be recommended.
Trying to fit 3 hours on a DVD-5 will only bring very noticable quality hits. Compressor will let you change the average bit rate so that you can fit 174 minutes but trade-off isn't worth it in my opinion.
Be aware that dual-layer -R and +R media may not play well for everyone everywhere.
I presume you are not making 1000 or more copies? If you were replication could solve this.
One other alternative would be to break-up the show into two parts and spread it across two DVD-5s.

HT4926 I started editing my project in Final Cut Pro trial, then purchased the full app. Now I can't find my project. What gives?

I started editing my project in Final Cut Pro trial, then purchased the full app. Now I can't find my project. What gives?

Did you by any chance move the Events and/or Projects folders? Are they on an exteranl hard drive and it is now not plugged in?

What kind of graphics card should i get to run final cut pro x on my 2008 mac pro?

What kind of graphics card should i get to run final cut pro x on my 2008 mac pro?

Hello Andres. I own an Early Mac Pro 2008, and have had the blessing of using both FCP X & Motion 5 for some time now. This is a pritty open question and it depends on your usage and the throughput nessesary to handle your work load. I can share what my set up is, & it may help you deside if this is enough power for you or help you move in another direction. Keep in mind that the buss speed and cpu are a big part of helping FCP X more so than the video card, although the video card does come into play here as well. Now if you are wanting to run Motion 5 as well, the video card is Almost Everything, and you need the biggest and best situation here that the throughput on this system will except. I'm running 14 gig of system ram, and the video card is an ATI Radeon 5870. For FCP X, running 1920x1280p footage optimised in pro-res 422, she can move along with some render time nessesary when dropping on the timeline, also filters, transistions, titles ex, have a bit of a laps time to render, but then she runs ok. This wait is not as much of a challenge with this set up as with Motion. I need a much bigger gpu on the video card for this app. Not sure if this computers throughput is really worth the upgrade. Beleive this though, Motion is demanding on using ALL you can give it. It is a Genious App, and it also calls for ALL THE POWER YOU CAN GIVE HER IN A VIDEO CARD. Conclution: if you are just starting which it sounds like, even a smaller video card than this can work For FCP X. Make sure you have at least 8 gig of cpu ram. 12 or more will help here. Also make sure the card is OpenCL compadible.....& this is in the thread above,,,,,,,,

Why does Compressor take so long to export a 10 minute video clip from Final Cut Pro?

I've been trying export a 10 minute clip from Final Cut Pro. so it can be used with DVD Studio Pro and burned. However, the rendering process has taken 12 hours! The clip I'm exporting has minimal effects, no music, and is in 1080i 30fps. Does anyone know what's going on or what I can do to speed up the process?

First: How are you exporting? Are you using the Share feature or Send to Compressor?
Second: You haven't said anything about your system configuration or really very much about your movie. What is its format… is it really 30fps or 29.97? Whatever it is, are the project settings identical to the clip properties, or were they changed?
Russ

Editing .AVI files in Final Cut Pro 5

I am trying to edit .AVI files on Final Cut Pro 5 on a volunteer basis.
I have converted the files to .MOV files with Quicktime Player.
I am able to import one of these files into Final Cut Pro 5, and can even watch it in the viewer.
But when I place it in the Sequence tab to edit it, I get a screen that says "UNRENDERED" for the whole clip.
Based on past experience, the video would be harder to edit in a rendered state.
Any advice on how to edit .AVI files would be much appreciated.

AVI files are quite similar to some .mov files, but the devil is in the details (so to speak.)
You don't give any particulars, so I'm going to assume you're working with standard definition NTSC video. Additionally, I'll assume that your system is PowerPC Mac since only FCP 5.1 and higher supports Intel processors.
FCP uses sequence presets that spell out the parameters for the timeline. If a clip is dissimilar or acquires enough filters to be functionally dissimilar,the timeline will become red for that portion of the timeline. The same is true for the audio portion of the clip.
The terms "QuickTime" and ".mov" (and probably ".AVI" for that matter) are kicked around as if they are specific but in fact they are quite vague. It's like saying you have a Ford; without any additional info like model and year, it's hard to get down to cases.
Use Compressor or QuickTime Pro to convert your footage to DV/DVCPRO-NTSC (if it's SD and you're in North America) and make sure the audio is converted to 48KHz/16-bit. This should match the NTSC presets and your timeline should a "cool" color (dark blue to light green) and playback nicely.
Depending on the amount of processor power your system has, you may be able to play back clips with filters or even two or more layers of video without rendering. To be frank, don't count on it because someone has had well over 5 years to upgrade the system and hasn't so it may be "peaked out" already. You can usually step through the timeline using the arrow keys or by rendering short segments if you practice good "timeline hygiene" i.e., keep the timeline as clean as possible, don't strew clips over many video layers and let them stack up.
That should get you going, I strongly recommend you take a little time to read the help docs/// they actually can help.
Good luck!

I just did edited a feature using Final Cut Pro Version 7 i want to upgrade to X will the clips i saved on version 7 still be compatibly and usable on X

I just did edited a feature using Final Cut Pro Version 7 i want to upgrade to X will the clips i saved on version 7 still be compatibly and usable on X

thanks I was afraid of upgrading to Pro X and having to redigitise all that footage again thx Tom

When will the multicam editing be released in Final Cut Pro X ?

When will the multicam editing be released in Final Cut Pro X ?

It says "Coming in early 2012."
http://www.apple.com/finalcutpro/software-update.html

Best Quality Export of Std Def Video from Final Cut Pro to AppleTV

I get beautiful results when exporting HDV content and AIC content from FCP to Apple TV but what is the best way to handle anamorphic SD content? I'm getting pillboxing (black bars on the side) when I do it directly from FCP's timeline. Of course I could open a QT file in QT Player Pro, change the aspect ratio to classic then do an export, but that creates one more level of unwanted compression.
Anyone?

Sure, export it as an uncompressed AVI or QT file.

HT5958 We are 4 min in to editing a video on final cut pro. now my computer is freezing up. I have heard that this is a glitch from downloading. (beyond frustrated) is this from working from 2 external hard drives? PLEASE HELP! =)

PLEASE HELP. =)
we are about 4 minutes into editing a video for the first time on final cut pro x 10.1. everything was going very smoothly, but then it started freezing up. I had to do a hard reset and took it into the computer store that actually installed final cut for us. they suggested that our mac actually is not capable of keeping up with final cut. (I FIND THIS HARD TO BELIEVE!!) We work on an IMAC 2.66 ghz intel core 2 duo. 8 gb 1067 mhz ddr3. software os x 10.9.1 (hopefully that info will help for your suggestions) Because we have soooooooooooo many hours of high def video, we are working off of two external hard drives.... is this a problem?? or do we really need to upgrade our computer?????

Like Russ said, check Activity Monitor and see what else is running and turn off any Applications that aren't needed.
Turn off wi-fi or disconnect the wire that goes to the Internet
Turn off Background Rendering (if you see an orange line on the top of the time line that moves along and gets shorter while you're not doing anything that is a good sign that Background Rendering is running.
I haven't used 10.1 yest but on the previous version there was a small circle approximately in the middle of the screen, about 1/2-inch or 1 cm in diameter, and it would have a number inside. The number is the percent complete of what is hapening. When it is Rendering the percentage will be shown.
Basically, you probably need to free up resources.
For what it is worth, my previous Mac Pro was a 1,1 2.66 machine, also with 8GB of, I think, 667 memory, and it would process FCPX 10.0.9 okay. It did have an upgraded video card, though.

Can't edit title text in Final Cut Pro X

Okay I'm seriously about ready to pull my hair out. Every time I go to edit text, FCPX crashes. Now I have to close the inspector before editing text for it to not crash...and that works sometimes. But now I have a new problem. After exporting my movie, I noticed I needed to make some adjustments to titles... Tried double clicking the text in the viewer...it doesn't even let me edit it anymore! Really? Why would you even release this Apple? Final Cut Pro X is clearly not finished. What a joke.

Hello,
It seems I have nearly the same problem. The simple fact of selecting the title in the project or in the project library crashes FinalCut Pro.
I thought it was caused by the accended frensh characters, like for an imported iMovie Project, but this is not the case. Even without accended characters, the crash is systematic.
Thanks a lot for the idea of closing the inspector! Now I can work with titles (sometimes at all) without crashing
The good news is: I can edit the title, even when re-opening the project later, if I:
1. Select the title element with the inspector closed
2. Open the inspector
3. Modify some parameters like the colors of the titles.
N.B.
- The first time I did it, the inspector opened, empty, on the left side of the screen !?!
- It works even in the precedent little project wich I encountered the bug
- I can edit too in the viewer.
My config:
MacBook 2 GHz Intel Core 2 Duo
Mémoire 4 Go 667 MHz DDR2 SDRAM
Graphisme NVIDIA GeForce 9400M 256 MB
Logiciel Mac OS X Lion 10.7.1 (11B26)

Playhead will no longer position itself in between clips in Final Cut Pro X timeline

I have been using Final Cut Pro X and it used to position the playhead in between clips with ease so I could drag down the audio and position it at the exact placement of playhead where I wanted it at the beginning of a new clip. However, now the playhead is not going to the beginning and end of clips, or inbetween clips and when I drag down the audio it won't go exact where the playhead is. I feel like it must have something to do with the settings, I'm not sure what. Any suggestions?

The up/down arrow keys jump to Edit Points. There should be no space between clips, so getting "inbetween" clips is not technically acurate. You're either on the first frame fo the incoming clip, or the last frame of the outgoign clip. First frame of the incoming clip is what you want.
Yes, be sure snapping is on, and use the up/down arrow keys.

What is best way to handle editing long clips in Final Cut Pro?

Similar Messages

Maybe you are looking for