What is Best Way to Handle Things when you dont know Much about them

The buzz words S/4 HANA is here .. 10 Unanswered questions Best things to know about HANA and list continues but am I all really ready for this ? The question that circles around me
What is best to learn and Explore things when you know much about .. S/4 . can some tell me best ay to handle this ? And does knowledge only help to kill the non experience on this ?
Awaiting reply

The first thing to do is understand how innovative companies are using S/4HANA. You can do this by watching free broadcasts from SAPPHIRE NOW and the HANA Effect podcast. If you don't understand how the S/4HANA innovations can help, then I think any other learning is just in a vacuum and not going to be productive.
Then I would suggest taking some of the many free courses available from SAP, like this one from OpenSAP.

Similar Messages

How do you unlock a phone when you dont know the password?

how do you unlock a phone when you dont know the password?

Connect in recovery mode and restore, you'll get the option to reset the passcode during this process:
iOS: Unable to update or restore and iPhone and iPod touch: Wrong passcode results in red disabled screen
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.

What is best way to handle editing long clips in Final Cut Pro?

I had to import some footage which contained timecode breaks as one continuous clip. I now have several ultra-long clips. What's the best way to chop out the bits I need and place them in a separate bin for the edit?

Hi -
Put the clip in the viewer. Mark an In point where you want your subsection to start and an outpoint where you want it to end. Type Command + U to make a subclip in you browser.
Repeat as necessary.
MtD

How to change passcode when you dont know it

Hi there i have changed my passcode but you know when you use fingerprint recognition at all times and than you battery died on you when you started up you have to put passcode in and that is where my problem began. Can somebody tell me how to reset passcode plz.

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

How to upload data using utl_file when you dont know the exact file name

Hi
i want to upload data from a flat file to a table.
i dont know the exact file name. i want to make a search for filename. like i want to make a search on file (say test*) which will give me all the files with test.
i want to upload data using these files.
how can i do this by using UTL_FILE.
Regards
Manish

Thank you very much.
Thing is previously we are using sqlloader and shell script for loading the data.
now i am creating a procedure (if possible without parameters).
Is there any other way i can do that.
can i make a wild card search using utl_file.
Thanks n Regards
Manish

How To Reset Your Security Quesitons When you dont know them

Help Please.... I dont Want to call them either. I want to buy some thing really bad

You need to ask Apple to reset your security questions; ways of doing so include clicking here and picking a method for your country, and filling out and submitting this form.
Nobody on these boards can reset them for you. They wouldn't be security questions if just anyone could reset them.
(96367)

Using Liquid, what is the best practice for handling pagination when you have more than 500 items?

Right now I can only get the first 500 items of my webapp, and don't know how to show the rest of the items.
IN MY PAGE:
{module_webapps id="16734" filter="all" template="/Layouts/WebApps/Applications/dashboard-list-a.tpl" render="collection"}
IN MY TEMPLATE LAYOUT:
{% for item in items %}
<tr>
<td class="name"><a href="{{item.url}}">{{item.name}}</a></td>
<td class="status">Application {{item.['application status']}}</td>
</tr>
{%endfor%}

<a href="{{webApp.pagination.previousPageUrl}}">Previous Page</a>
Current Page: {{webApp.pagination.currentPage}}
<a href="{{webApp.pagination.nextPageUrl}}">Next Page</a>

How do you change your security questions when you dont know what they are?

I have a apple account but i forgot my answers to my security questions and i cant buy anything if i cant answer them? Does anybody know how i could reset it?

Click here for information. If the option to have the answers emailed to you isn't available or doesn't work(the email may take a few hours to arrive), contact the iTunes Store staff via the link in the 'Additional Information' section of that article.
Without a rescue email address, you can't reset them yourself. Nobody on these boards can reset them for you.
(93187)

Best way to handle multiple currencies

I have a requirement that users should be able to report against an OLAP cube in a currency of their choice (from a list of about 20) and was wondering what the best way to handle this might be.
One option would be to have a currency dimension containing the list of valid currencies and then to pre-calculate measures in each of the currencies and store them in the cube. However the downside of this is that the resultant cube would be 20 times larger than a cube in a single currency, take longer to maintain etc. I could of course partition the cube by currency to improve reporting performance since users would only report in one currency at a time.
Another alternative would be to dynamically calculate the measures based on exchange rates - I guess this could either be done in the cube itself or as part of the reporting code. However since exchange rates are daily, this would obvioulsy prevent me from aggregating data up the time dimension (all measures are at the day level).
Is there any standard way of doing this and what are the pro's and con's?
Thanks,
Chris

Sorry - messed up - I should have posted this in the OLAP forum.....

(workflow question) - What is the best way to handle audio in a large Premiere project?

Hey all,
This might probably be suitable for any version of Premiere, but just in case, I use CS4 (Master Collection)
I am wrestling in my brain about the best way to handle audio in my project to cut down on the time I am working on it.
This project I just finished was a 10 minute video for a customer shot on miniDV (HVX-200) cut down from 3 hours of tape.
I edited my whole project down to what looked good, and then I decided I needed to clean up all the Audio using Soundbooth, So I had to go in clip by clip, using the Edit in SoundBooth --> Render and Replace method on every clip. I couldn't find a way to batch edit any audio in Soundbooth.
For every clip, I performed similar actions---
1) both tracks of audio were recorded with 2 different microphones (2 mono tracks), so I needed only audio from 1 track - I used SB to cut and paste the good track over the other track.
2) amplified the audio
3) cleaned up the background noise with the noise filter
I am sure there has to be a better workflow option than what I just did (going clip by clip), Can someone give me some advice on how best to handle audio in a situation like this?
Should I have just rendered out new audio for the whole tape I was using, and then edit from that?
Should I have rendered out the audio after I edited the clips into one long track and performed the actions I needed on it? or something entirely different? It was a very slow, tedious process.
Thanks,
Aza

Hi, Aza.
Given that my background is audio and I'm just coming into the brave new world of visual bits and bytes, I would second Hunt's recommendation regarding exporting the entire video's audio as one wav file, working on it, and then reimporting. I do this as one of the last stages, when I know I have the editing done, with an ear towards consistency from beginning to end.
One of the benefits of this approach is that you can manage all audio in the same context. For example, if you want to normalize, compress or limit your audio, doing it a clip at a time will make it difficult for you to match levels consistently or find a compression setting that works smoothly across the board. It's likely that there will instead be subtle or obvious differences between each clip you worked on.
When all your audio is in one file you can, for instance, look at the entire wave form, see that limiting to -6 db would trim off most of the unnecessary peaks, triim it down, and then normalize it all. You may still have to do some tweaking here and there, but it gets you much farther down the road, much more easily.Same goes for reverb, EQ or other effects where you want the same feel throughout the entire video.
Hope this helps,
Chris

When I'm done with my fcp sequence, whats the best way to get it to dvd?

When I'm done with my fcp sequence, whats the best way to get it to dvd?

The advice to go to Compressor left out the part that you may want to convert your audio to AC3 becaus ethe MPEG2 bitrate is probably too high for DVD specs.
This method is in the DVDSP manual and it's in the Compressor manual, both difficult to locate, but easily searchable.
Here's what I'd do: Export the timeline form FCP in the native sequence settings, self-contained. Bring that self-contained movie into DVDSP and let DVDSP handle the transcode.
The advice to go to iDVD is even easier.
bogiesan

Best way to handle when Production XI is in outrage/down

Hi All,
My production box is running smoothly now.If we want to go for any outrage and still we will be receiving many messages through internet from many partners.
So we are expecting how to receive the messages when production XI is in outrage. My client is thinking of putting one more instance with the replica of Production box. So that when the main production is in outrage then immediately they can switch back to this replica version and they can process the messages untill the main one get ready.
Now I am very much concern what are the implication will be if we go like this.
1. which is the best way to handle XI box to maintain when the system is outrage/down?
2. Is it a good idea of creating replica of production instance and maintaing this when the main one is in outrage?
Kindly suggest what you guys are doing for your implementations.
Thanks
Seema

>
> 1. which is the best way to handle XI box to maintain when the system is outrage/down?(An act of extreme violence or viciousness)
>
XI Box - Outrage -Should be a robotic XI Box. Now I know that you are thinking what to do when cops come and handcuff it. -- Just kidding..
Ok, here's the logic, you want to replace a piece of water pipe that gets water to your faucet. What do you do without the water leaking or disrupting the water supply... you either turn off the valve or add a temp pipe to keep the water flowing..
So check into your sys landscape for Fail safe or High Availability, may be one of those can save you money and time.
AB

What's the best way to handle new versions of software?

So we have an Application setup for Adobe Reader (just using Reader as a general example) which is part of our Task Sequence. When Adobe releases a new version of Reader, what's the best way to handle getting the new version into our SCCM setup.
I know I can create a new application and do it all over and select the new file, but can I simply replace the files that the application is pointing to and then somehow tell it to update the DPs with the new files? I'd rather not have to create new
applications every time if I don't have to.
Thanks.

I think continue the way you are doing right now by creating a new application each time there is a version change. Its a clean way to do and this helps with Application life cycle mgmt aswell where you keep track of versions across the environments and
eventually retire an application. Specially where no changes are made without a change control. This is completely process specific and may not be applicable.
i do agree with above posted comments about using supercedence option.
However most of the apps comes with upgrade capabilities from previous versions. So you can upgrade existing version with new one if you do not wish to use supercedence.
Thanks

What is the best way to handle input parameter

When writing sub-vi's, what is the best way to handle input parameter range checking? On the front panel I can choose to have numeric values coerced to be within range, but this does not affect constants or controls wired to the vi when used as a sub-vi. I can build range checking into the vi, but this can result in a cluttered looking vi. Do you have any suggestions.

As you discovered, the Range and Coercion properties of controls do not work when used in sub-vis.
Your best option is to go ahead and build your range checking into your sub-vis. If it�s something you will be doing a lot, just make your range checking a sub-vi and drop it where needed. This will keep the clutter to a minimum. You may end up with more than one range checking VI if you need different functionality, but this will still make less clutter and easier re-use.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

What is the best way to handle very large images in Captivate?

I am just not sure the best way to handle very large electrical drawings.
Any suggestions?
Thanks
Tricia

Is converting the colorspace asking for trouble? Very possibly! If you were to do that to a PDF that was going to be used in the print industry, they'd shoot you! On the other hand, if the PDF was going online or on a mobile device – they might not care. And if the PDF complies with one of the ISO subset standards, such as PDF/X or PDF/A, then you have other rules in play. In general, such things are a user preference/setting/choice.
On the larger question – there are MANY MANY ways to approach PDF optimization. Compression of image data is just one of them. And then within that single category, as you can see, there are various approaches to the problem. If you extend your investigation to other tools such as PDF Enhancer, you'd see even other ways to do this as well.
As with the first comment, there is no "always right" answer. It's entirely dependent on the user's use case for the PDF, requirements of additional standard, and the user's needs.

What is Best Way to Handle Things when you dont know Much about them

Similar Messages

Maybe you are looking for