What is best way to prepare Pre for resale.

I am selling one of my Pres. What is the best way to get it ready for resale. I never 'patched' or 'homebrew' the Pre. I want to make sure that all personal information is wiped from the phone, including purchased apps.
Any help is appreciated.
Post relates to: Pre p100eww (Sprint)

Once you're certain that you've copied off all needed information from your Pre, go to Device Info, Reset Options, Full Erase. This will erase everything, including all apps and data and everything on the USB drive partition. If you're particularly worried about getting rid of all personal info, select Secure Full Erase.

Similar Messages

Best way to prepare photos for iPhoto printed book

Hello,
I was wondering what would be the best way to prepare photos for iPhoto printed book on a Macbook Pro so to achieve the most realistic results to what's on the screen
ie. which software should I use to change photos from RGB to CMYK, photoshop or iPhoto itself. I'm guessing maybe the autofix feature in iPhoto? (I don't have Aperture)
Secondly, which monitor color setting should I set the screen at? I'm guessing it's either Apple RGB or Colour LCD, maybe even ColorMatch RGB?
Any any other tips that people can give in achieving the most realistic results to what you have on the screen when your printed iPhoto book gets sent back. I don't want the mid tones to disappear or become too bright because the gamma and color settings were different to what they use at the other end.
Many thanks.

Hi,
The situation has changed a little, our original photos are in RAW format and some of them are slightly over saturated in the higher tones.
I've read on other threads that it is a good idea to run the 'Enhance' tool on all photos before sending the iPhoto Book away.
Since iPhoto's 'Enhance' tools seems to do a lot of helpful things like sharpen, adjust the levels, etc it also seems to notch the contrast up and this would prove destructive for the lighter and darker tones not captured by the camera's dynamic range.
So as I've been advised it's best to use Apple's own tools before sending the iPhoto Book away, so I'm going to download the trial of Aperture.
Does anyone have any more recommendations on which monitor colour profile setting to use etc. I've also read that iPhoto prints best from JPEGS so the RAW will obviously need changed. Will Aperture automatically save to Profile name: Camera RGB Profile after I've done some editing there?
What would be the best way to prepare RAW images in aperture where some of them might need an Image Overlay in Photomatix then imported back to Aperture for printing an Apple/iPhoto style Book?
Many thanks

What is the best way to prepare for CERTIFICATION?

what is the best way to prepare for CERTIFICATION?
what is needed?
where can i read more about it?

Hi,
Do as much as possible exercises based on your course material(which will be more than enough).
If you know (some) Java and have understand the basics of OOP then this is enough for the exam.
And do not forget:
it is a multiple-choice test meaning that you see the possible answers.
Either a single answer is correct (then you will have radio-buttons) or several answers are correct
(then you will have checkboxes; in this case almost all questions will have more than one correct answer).
You can refer to the topics for the certification
https://websmp102.sap-ag.de/~sapidp/011000358700000499112003E
Some links which might help
/message/213564#213564 [original link is broken]
/message/514469#514469 [original link is broken]
/message/1315746#1315746 [original link is broken]
/message/1736299#1736299 [original link is broken]
/message/1736299#1736299 [original link is broken]
/message/257122#257122 [original link is broken]
/message/130164#130164 [original link is broken]
/message/1916905#1916905 [original link is broken]
/thread/167254 [original link is broken]
/message/213564#213564 [original link is broken]
/message/1315746#1315746 [original link is broken]
<b>
you try www.sapdoamin.com
They provide Certification simulation questions which are veryuseful and a must try site.</b>
Yes more questions comes on OOPS so get your OOPS concepts very clear.
You don't need to do extensive coding in OOPS.
Just get the concepts clear and i am sure the certification will be a cake walkthrough.
All the best and good luck with your ABAP Accreditation.

Wipe my hard drive clean except for the OS whats the best way?

I need to wipe my hard drive clean except for the OS whats the best way?

From Kappy (note: with this method, you will need to update to the present OS version using the appropriate Combo Update from Apple Downloads.)
Boot from the OS X Installer Disc One that came with the computer. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities (Installer menu if using Panther or Jaguar) menu. After DU loads select the startup volume from the left side list then click on the Erase tab. Set the format type to Mac OS Extended (Journaled) then click on the Options button. Select the one pass Zero Data option and click on the OK button. Then click on the Erase button.
Note: You can skip the Zero Data option if you are not concerned about removing sensitive personal data from the hard drive. If you choose to skip this part of the process then it is possible for others to recover data from the hard drive. The Zero Data procedure will prevent others from getting access to your personal information.
This process will take 30 minutes to several hours depending upon the size of the hard drive. After formatting has completed quit DU and return to the installer. Now complete the OS X installation. At the completion of the installation do not restart the computer. Instead just shut it off. The next user will be presented with the Setup Assistant when they turn on the computer just as it would if new out of the box.
https://discussions.apple.com/message/12364050?messageID=12364050#12364050

Whats the best way to get a description for a code

Hi,
What is the best way to find description for a code, when both of them resides in different table.I have to do this like 3 times for different codes.The code and description lies in differnt table.
Can i use select statement.. if yes, what operator should i use?
Thanks

Hi,
to do a lookup you may either use the Key Lookup Operator (it makes it easier to define default return values if the lookup fails) or a Joiner (to probably outer join your lookup table).
If you have many lookups you can do them in one joiner instead of having a key lookup operator for every one of them to reduce the total number of operators in your mapping.
Regards,
Carsten.

What is the best way to format Videos for ipod touch?

What is the best way to format Videos for ipod touch? Used Quicktime Pro/ Export (iPhone setting). Videos aren't as crisp as downloaded Videos. Compressors /ipod video Setting also looks crapy (with bitrate med & High). What should I use?

Visualhub is a transcoder with multiple input and output formats with specific setting for iPod,iPod touch. Costs around $19-used to work great but recently everything I convert suffers audio crash than closes out the player. Hopefully they will fix it.
Elgato H.264 hardware transcoder is $99 dollars(USB stick that plugs in to Mac)-speeds up encoding of any file quicktime can handle, settings for apple tv, iphone/touch, ipod,Sony PSP. Worth the cost if you transcode a lot of video for the Touch or own an elgato HD tuner. Files work flawlessly and look great.
Mpeg streamclip-free. Works great, has presets or can customize the output.

What is the best way to create space for a Yosemite download?

What are the best ways to create space for the download of Yosemite. I can't install it as I don't have enough space.

Did you empty Trash? Very important!
How much space do you have available? Click in the HDD icon on the desktop, COMMAND+I.
Also try a Safe Boot:
http://support.apple.com/kb/HT1564?viewlocale=en_US
That will temporarily create some additional space.
Ciao.

I have a macbook pro I use for work and iMac at home. What is best way to manage my files? Use iCloud? Dock my laptop when I come home? Appreciate any suggesitons

I have a macbook pro I use for work and iMac at home. What is best way to manage my files? Use iCloud? Dock my laptop when I come home? Appreciate any suggesitons

That depends on what kind of "files" you're talking about and what your employer's policy is on using cloud storage.
I found dropbox and/or OneDrive work very well for keeping documents in sync between multiple machines.

Best way to light photos for printing

Hi All,
I previously posted on the forum on what to do if my prints are too dark. After getting helpful feedback from other forum users and confirming with the pringint company, I made sure that my monitor is calibrated to 90 lumens. Now am wondering the best way to lighten the photos for export (as I can't see the impact of gamma like in the print dialog.)
Backgound:
I setup my macbook pro to get the correct color calibration to print correctly. (I am exporting to sRGB colorspace to send to the online printing company). After calibrating my laptop lcd, it is apparent (by sending a few test photos) that the prints still come out a little too dark. As I am working on a laptop, I am limited to how much the screen vs exported photos can be adjusted. Therefore, I am looking on the best way to retouch the photos for exporting. Also note that I am using apple aperture.
Which is the best way to lighten up the photos (or a group of images that are taken under different lighting situations exposures, that would also keep my workflow streamlined?
1. Adjust the images on export using a gamma adjustment. (easiest to implement but since aperture only shows gamma adjustments on printing and not exporting, setting this correctly will be a guess.)
2. Use a curves adjustment to lighten the photo. (Might be the easiest to implement and see the results but need to create separate version for viewing on screen vs printing which isn't hard but adds a layer complexity).
3. Use some of the exposure/brightness/showdow recovery sliders. (Unsure of the best sliders to use and each photo needs separate adjustments. In addition, like 2 above, separate versions would be need to display on screen vs printing).
4. (Other ideas?).
I'd appreciate everyone's thoughts.
Thanks,
Jeff

Hi,
The situation has changed a little, our original photos are in RAW format and some of them are slightly over saturated in the higher tones.
I've read on other threads that it is a good idea to run the 'Enhance' tool on all photos before sending the iPhoto Book away.
Since iPhoto's 'Enhance' tools seems to do a lot of helpful things like sharpen, adjust the levels, etc it also seems to notch the contrast up and this would prove destructive for the lighter and darker tones not captured by the camera's dynamic range.
So as I've been advised it's best to use Apple's own tools before sending the iPhoto Book away, so I'm going to download the trial of Aperture.
Does anyone have any more recommendations on which monitor colour profile setting to use etc. I've also read that iPhoto prints best from JPEGS so the RAW will obviously need changed. Will Aperture automatically save to Profile name: Camera RGB Profile after I've done some editing there?
What would be the best way to prepare RAW images in aperture where some of them might need an Image Overlay in Photomatix then imported back to Aperture for printing an Apple/iPhoto style Book?
Many thanks

HT3819 I have 2 Ipod touch's, one a 64gb and one an 8gb. Whats the best way to use them both on the same itunes account?

I have 2 Ipod touch's, one a 64gb and one an 8gb. Whats the best way to use them both on the same itunes account?

Click here for options.
(64410)

Whats the best way to backup my iphone?

Hello. I am brand new to iphones....actually to apple anything. Never owned an apple product. I dont quite understand the whole itunes/icloud thing at all and I was hoping someone could explain it to me. All that I wish to accomplish is make sure all of my stuff on my iphone(apps, pics, music, etc) is backed up regularly and in the event that my iphone is lost/stolen, breaks, needs to be replaced for any reason, or if I upgrade to a new iphone I would like to be able to recover everything.
    OK, so far I have itunes installed on my laptop and I "sync" with that regularly (pretty much whenever I install a new app). But is my understanding correct that by syncing with itunes all of my stuff is stored locally on my laptop? If that is true, then what happens if my laptop crashes? So thats where I thought icloud came in. So I started backing up to icloud (via wifi in Settings>icLoud>storage&backup). But I notice that when I backup this way it is actually only backing up a small amount of data (in-app data??) rather than the entire app.
    I thought you would be able to sign into icloud.com and be able to view everything that you have ownership of or what you have backed up but that is not the case. I did download the icloud control panel to my laptop and it shows a little more information.
    So bottom line is I just need someone to explain how this stuff works and what the best course of action is for me to take regularly to make sure everything is safe, Thanks everyone! I sincerely appreciate any help you can give me!!

bjs19781978,
There are 2 ways to back up as you have stated. iTunes or iCloud.
You are correct in saying iTunes backs up everything on your computer. If you do lose your computer though, you will lose that information, but you would most likely still have your phone unless you lose your computer and phone at the same time which would royally suck.
You can also back up to iCloud like you have said. iCloud does not back up in the exact same way as iTunes, it only backs up application data, contacts, address books, and a few more things. The advantage to this is it does it automatically if you are connected to wifi, the phone is locked, and the phone is plugged in.
Look at this link to see exactly what iCloud does back up. Hopefully this helps a little.
Apple - iCloud - backup

One headphone does not work or works 50% of the time. What is best way to resolve?

one headphone does not work or works 50% of the time. What is best way to resolve?

First of all, I'd recomend resetting the iPod. Do this by pressing the 'Menu' and 'Center" buttons for 10 seconds or until the Apple logo appears.
If this doesn't work, then it sounds like a hardware fault.
To identify the issue, if you have one, try plugging the iPod into a speaker through the dock. If this works, then the issue is with the headphone jack. If not then the logic board is dead. If the iPod is less than a year old, then it can be repaired by Apple for free. Just book an appointment for the Genius bar.
If not then, you could see about sending it to an iPod Repair Company, such as my own. A replacement headphone jack would cost £30.00 in the UK, including next day delivery. Other companies you could try would beUKiPodRepairs, but we guarantee to beat any quote that you get.
Hope that this helps,
Mark Sweeney
Dr Pod Founder

I am moving from PC to Mac. My PC has two internal drives and I have a 3Tb external. What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

I am moving from PC to Mac. My PC has two internal drives and I have a 3Tb external. What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

Paragon even has non-destriuctive conversion utility if you do want to change drive.
Hard to imagine using 3TB that isn't NTFS. Mac uses GPT for default partition type as well as HFS+
www.paragon-software.com
Some general Apple Help www.apple.com/support/
Also,
Mac OS X Help
http://www.apple.com/support/macbasics/
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Get Help with your Product
http://docs.info.apple.com/article.html?artnum=304725
Apple Mac App Store
https://discussions.apple.com/community/mac_app_store/using_mac_apple_store
How to Buy Mac OS X Mountain Lion/Lion
http://www.apple.com/osx/how-to-upgrade/
TimeMachine 101
https://support.apple.com/kb/HT1427
http://www.apple.com/support/timemachine
Mac OS X Community
https://discussions.apple.com/community/mac_os

I want to connect a Mac mini to a Samsung 40", Whats the best way to do this?

I want to connect a Mac mini to a Samsung 40" LED tv to use as the monitor, whats the best way of doing this?

Understand that there is one HDMI port on your TV that is specifically designated for PC connectivity. The order that the TV or Mini are powered on may determine your results. For your specific TV model, check buyer reviews on Amazon or elsewhere that can include optimum TV/Computer settings adjustment for improved viewing results.

When I'm done with my fcp sequence, whats the best way to get it to dvd?

When I'm done with my fcp sequence, whats the best way to get it to dvd?

The advice to go to Compressor left out the part that you may want to convert your audio to AC3 becaus ethe MPEG2 bitrate is probably too high for DVD specs.
This method is in the DVDSP manual and it's in the Compressor manual, both difficult to locate, but easily searchable.
Here's what I'd do: Export the timeline form FCP in the native sequence settings, self-contained. Bring that self-contained movie into DVDSP and let DVDSP handle the transcode.
The advice to go to iDVD is even easier.
bogiesan

What is best way to prepare Pre for resale.

Similar Messages

Maybe you are looking for