What is better to use? The onboard sound for the NF4 Plat/SLi or AUdigy 1?

Quote from: Luke51087123 on 09-July-05, 03:10:17
yeah i was just sayin the ls sucks and i havent had any issues with the onboard
A Xmas present NEVER sucks.
Quote
so as long as the audigy i get isnt an LS, im good?
I'd say so. The onboard sound isn't bad, but you get a more powerful DSP with much cooler driver mods(should you want something like that)

Similar Messages

What programming language is used to create applicaitons for the iPad

I was curious what programming language is used to create applications for the iPad.

http://developer.apple.com/ipad/sdk/

IOS 7 has remove the unlock sound for the apple devices? Is it possible to set it back?

iOS 7 has remove the unlock sound for the apple devices? Is it possible to set it back?

ATV cannot play movies from the TC, even if it is on your home network.. ATV is a streamer.. it is not a media player.. and the TC is a dumb as a board hard disk in a router.. so it has nothing in it either.
You cannot play movies from ATV without itunes, which streams to the ATV.
If the iMac is running 24/7 then you should be able to connect to the iMac remotely and run from iTunes on that, which could then play movies stored on the TC.. with the following issues.. if you use wireless on the iMac forget it. The iMac has to be ethernet connected as it has to pick up the movie on the library and play it back to the TC to network to your home.
The next issues is speed of slowest connection.
Your download to your home maybe great.. what is the upload speed from your office like??
If you pay for uploads and downloads you will pay for the movie 3x.. first to download it.. second to upload it.. office to net.. and third to download it again.. net to home.. Sorry but it is better to play the movie directly from online itunes store.
If you plan to try and play non-itunes movies over the connection, it won't work.. ATV as stated is linked to itunes and cannot play movie files.
Overall this sounds like you need to think it out a bit more.

Is there a way to change the notification sound for the FB app

is there a way to change the notification sound for the FB app?

Go to: Settings, Sounds and look for Facebook Post. You can click on it and select which sound you want.

IS THERE A WAY TO CHANGE THE NOTIFICATION SOUNDS FOR REMINDERS?

IS THERE A WAY TO CHANGE THE NOTIFICATION SOUNDS FOR REMINDERS?

Yes you can, in the sense that this is an "Alert" sound you've set for the whole Mac software, and of course this is set in System Preferences > Sounds > Sound Effects. This will change the "alert sound" for the whole Mac.
So, No, you can't change only this particular Alert sound. If you could, it would be done in System Preferences > Notifications, and your only option there is whether you want the sound or not (Chkbox on "Play sound when receiving Notifications")

Is the onboard sound better than SB live!

I been thinking of using onboard sound right now Im using a old sound blaster live! its not the 5.1 What do you guys think ? See my sig for mobo type
This is the sound chip on the mobo Realtek ALC650 it has 4 to 6 chan. and it also has a
S-bracket that has analog to digital audio outputs by intergrating both SPDIF.
Anyone here use there onboard sound? I would like to buy sometime till I can get a new soundcard I want to free up a pci slot.

Uninstall the SB Live, and all related components thru device manager, then go to control panel>add or remove programs. Remove any Creative programs related to the SB Live. Shutdown and remove the SB from the system. Upon bootup, enter BIOS, and in the "Integrated Periphrials" section, set the AC97 to enabled, and reboot.
During bootup, it should find the AC97, and ask for the drivers, cancel the prompt. Then open the folder containing the drivers, and install from there.
One thing to check while you have the case opened to remove the SB, look for the front audio header, usually "JAUD1", there needs to be 2 jumpers installed in order to direct sound to the rear audio ports. These are normally installed before the board ships, but can be left off. Never hurts to look. I believe the jumpers go on 5-6 and 9-10. Check your manual to verify. the front audio header is located at the bottom of the board, near the front. If you have no manual, click here to download one.

I'm at a loss with the onboard sound

I can't get my 6 5.1 speakers to work on mt KT4 Ultra board, so I'm considering putting my Sound Blaster back in and disabling the onboard sound. What kind of a performance hit will I take?
I can get the fronts to work, or the rears to work but not all six. I have tried everything I can think of.
Thanks,
Al

Hi,
Have you set up the C-Media drivers for 5.1/6.1 sound? The settings for each speaker configuration can be found if you double-click the c-media icon next to the clock and select the settings button. Note how the plug configuration changes if you change the type of speakers.
I found that the 6.1 configuration with the headphone(?) option ticked makes all my 5.1 speakers work ok. I'm not saying I haven't got any sound problems but at least they all work.
I've also found that individual apps also need to be setup for the better speakers as well. PowerDVD needs to have the setting specifically set or the sounds all over the place.
Hope this helps
YT

How do I disable the onboard sound in CMOS?

I have a KT4 Ultra, and I want to disable the onboard sound so I can use my own Soundblaster card. How do I do this? I've looked through the BIOS, and nothing seems to stand out. Do I have to do it on the board itself?

I just downloaded the KT4 Ultra book and will run you thorugh what you have to do....
Your board has "C-Media 8738MX 6-channel audio with SPDIF out" so you will have to disabled it in Bios if you want to use a PCI sound card.
1. Reboot your PC and press "DELETE" to enter Bios.
2. Select "Integrated Peripherals"
3. Scroll down until you see "OnBoard PCI Controller" and then "Audio Controller". (It's last on the list!).
4. Select "DISABLED"
5. Select "SAVE & EXIT SETUP".
6. Turn off your PC.
7. Put your new PCI Sound Card in...I recommend PCI Slots 2-5. Try to keep PCI 1 and 6 clear....
8. Reboot. Your OS will go into "FOUND NEW HARDWARE". Wait until it's done.
9. Put your new PCI Sound card driver CD in and load the new drivers....REBOOT.

I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drvie to die before i use the other drives

I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drive to die before i use the other drives? Or, what is the best way to handle this?

I do not know what you are waiting for.
I'd make a backup of your important stuff before cloning the entire disk.
Carbon Copy Cloner will copy your startup drive to an external firewire drive. You can boot from the external drive to verify that you have a good clone. When you upgrade your existing startup drive, you can at any time boot from your external drive and go back to your existing system.
http://www.bombich.com/software/ccc.html
SuperDuper is the wildly acclaimed program that makes recovery painless, because it makes creating a fully bootable backup painless. Its incredibly clear, friendly interface is understandable, easy to use, and SuperDuper's built-in scheduler makes it trivial to back up automatically. And it runs beautifully on both Intel and Power PC Macs!

How do I disable the onboard Sound card in BIOS on the Equium A200

I am using a Creative Sound Blaster external soundcard but the recording level is very low and have been advised by Creative to disable the onboard sound card in BIOS but there is no option to do this. Can anyone help ?

Hi
You cannot disable it in the BIOS.
If you want to disable the sound card you can do this in the device manager!
cheers

How do I disable the onboard sound card in BIOS on the Equium A200 PSAE2 ?

I am using a Creative Sound Blaster external soundcard but the recording level is very low and have been advised by Creative to disable the onboard sound card in BIOS but there is no option to do this. Can anyone help ?

Do not post twice!
Follow this
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99828&

What is better to use a calculation field or to use stored procedure

Dear All
i want to know what is better to use a calculation field on oracle forms , or to do the calculation using a stored procedure at the data base level and fetch the results to the fields on the form
Best Regards

Hello Mohannad
the stored procedure approach might be more readable and maintainable when the calculation gets complicated.
And it might be easier to reuse when it's needed in another part of your application.
Bernd

What is better to use and why?

Hi,
What is better to use and why?
We have written follwing statements to check the existence of interested record in table.
1).
select count(*) from emp where deptno = 20;
2).
select 'X'
from dual
where exists (
select 'X' from emp
where deptno = 20);
Thanks and Regards,
Rushang Kansara

Assuming a large table, number two would be the fastest. If empno in unique, you can leave out the where exists part and just select x from emp where empno = 20. If empno is not unique, then using where exists can be faster. Assuming that empno is not unique, query 1 may elect to scan the whole table looking for that empno. Number 2 can use the index and return your result in, typically, three LIOs.
Again, it all depends on your indexing, size of tables, and uniqueness of key upon which you are searching.

What is better to use for CTM: PDS or PPM?

what is better to use for CTM: PDS or PPM?
what is easier to manage and use in CTM : PDS or PPM? and why?thanks
elena

Hi ,
In CTM I will recommend PDS over PPM.
You can directly CIF PDS as SNP PDS from ECC, you do not have to convert from PPDS to SNP unilke PPM.
PDS supports VC, Phantom assemblies.
PDS can be maintained in ECC and change transfer is easy.
Validity period of components can be specified in the PDS , Which is not possible in PPM.
SAP is developing PDS for future use compared to PPM.
Regards,
Pavan Verma

My I mac screen had a small green light on the lower left. on a black screen. the screen seemed unresponsive. When I re-srted the bong sounds but the wite screen never shows the apple - What do you think this means?

My I mac screen had a small green light on the lower left. on a black screen. the screen seemed unresponsive. When I re-srted the bong sounds but the wite screen never shows the apple - What do you think this means?

Welcome to the world of Mac. Some ‘light’ reading to help the transition. I don’t recommend trying to get through all of this at once.
A guide for switching to a Mac
Anatomy of a Mac
Mac Basics—Tutorials on using a Mac
Mac OS X keyboard shortcuts,
Mac Basics – Mac Find Out How
Mac Basics – Switching From Windows
Mac OS FAQ
MacTips,
Quick Assist
Switch Basics
Switching to Mac Superguide
Switching to the Mac: The Missing Manual, Mountain Lion Edition
Take Control E-books
Welcome to the Switch To A Mac Guides

What is better to use? The onboard sound for the NF4 Plat/SLi or AUdigy 1?

Similar Messages

Maybe you are looking for