What is BPMN Lock and Unlock?

Hi,
I tried to get some help on BPMN lock and unlock to understand if this can be used for check out and checkin model for version controlling.
Can any one please clarify?
regards,

Hi,
Implicit version control is not supported in the current release, but it will be supported in Release 11 (upcoming release).
In 10.1.3.4 the model gets locked while editing (user A). If user B wants to open the same model he can have only read access to it. Therefore different versions of processes have to be maintained in an external source control system (for now). In this context it might be helpful for you to investigate the XML-Import/Export functionality combined with an external CVS.
Additionally, models and databases can be manually released and versioned in ARIS using the appropriate attributes (as per project conventions). Please have a look to my post at Re: Control Version and see if it helps to get some ideas for your requirements.
Best regards,
Danilo.

Similar Messages

  • My ipod keeps locking and unlocking on its own! What should I do?

    My ipod keeps locking and unlocking on its own! What should I do?

    Try the standard fixes:
    - Reset. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod

  • Lock and unlock sharing DAQ PCI-6036E

    Is there an example for lock and unlock a DAQ resource (PCI-6036e)? I'd like to protect it from different threads.

    Well, I have LabVIEW 6.1 and TestStand 2.01f
    Does NI-DAQmx come with LV7?
    My application has one serial port,one PCI-6036E connecting to one SCXI with 16 thermocouple and 10 force sensors.
    motor controller pc board (MC)
    PC with TestStand and LabVIEW (master)
    | |
    RS485 COM1 PCI-6036E
    | | | | SCXI CHASSIS
    slave MC1 MC2 MC3 MC4 TEMPERATURE SCXI-1102
    | | | | | | | | Strain gauge SCXI-1520
    Stepper 1-3
    Brushless
    The PC is the master,
    MC1 2,3,4 are slave motor controller, they don't initiate communication but they take a command and execute it and they can return mo
    tor status encoder position.
    MC1 can controll four motors, serial command has MC1 address and individual motor sub-address.
    The four motors connect to MC1 are stepper and small.
    The motors connect to MC2 are brushless type
    The two motors connect to MC3 are stepper and medium size. Different manufacturers, but they all have encoder feedback and take about 4 - 15 seconds to move to commanded position.
    Strain gauges for measuring the force of the linear motors. Most motors have one strain gauge, but three motors have two strain gauges. (Fwd 1 inch with 8psi to a cork screw, once finding the corkscrew resistance, punch thru it with 50 psi and 1/2 inch)
    The test is life analysis and motor force.
    The test cycles the motors continuously and collecting data (encoder, temperature, force, cycles)
    What are the ways for doing the test?
    How should the graphical User interface be? this is the thing that the project managers care about. Only three seconds to impress them.

  • User lock and Unlock from CUA

    Hello All,
    I have a scenario where locking and unlocking a user in a specific child system has to be done through CUA. The TCode SCUM allows to do that. However, I'm looking for the underlying BAPIs corresponding to this TCode, so that my external application can directly invoke that.
    Any pointers will be highly appreciated.
    Best regards,
    Bala

    Are you wanting to lock selectively (only in some child systems and not others)?
    What is the reason for not using SCUM?
    The BAPI is like a gun, where you enter only the user ID as the bullet (a silver one with the user's name on it).
    You then aim the gun at a target (in the destination parameter of the FM).
    When you pull the trigger, the user is locked in the target.
    The caliber of the gun depends on the authorizations of the user in the destination server connection.
    Whether or not you hit the user, will depend on how good a marksman you are on the client server.
    Cheers,
    Julius
    Edited by: Julius Bussche on Apr 2, 2009 1:02 PM

  • I get Blackberry 9800 and using last 18 months.Now lock and unlock not working I am in India No chance to repair in India since get out side

    I am using blckberry  9800 for the last 18 months.Now it is not woring lock and unlock .I contact all dealers in India and they told they are unable to service and repair since I purchased from out side India.I purchased from Dubai .What shall I do please

    No matter where you purchased it, it's beyond the one-year warranty.  To repair it would probably cost more than it would to replace it with a new phone (even if it's a used phone and new to you).
    I hope that helps you. 
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • Locking and unlocking photo books

    When I creat a photo book and walk away from it for a while, I cannot get back into and continue my work. It automatically locks the book and thinks I am done. How can I lock and unlock? I want to be able to spend a few days working on a book but so far I have to complete it in one sitting. Also, when I had a lower version of Iphoto I could lock and unlock without a problem.
    Thank you for your help.
    Debra

    Debra:
    Welcome to the Apple Discussions. What do you mean by "lock" and "unlock". Never heard of that. Do you mean open? What happens when you close iPhoto and then reopen it again. Can't you click on the book icon in the Source pane and get it back open to work on it?
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

  • Restrict SU01 to only lock and unlock user passwords

    how  to  restrict SU01 to only lock and unlock user passwords,(should not have acces to create users) What is the auth.obj I need to change ? please suggest.
    Thanks
    sr
    Message was edited by:
            sunny raj

    Restrict authorization object S_USER_GRP to activity '05'
    Cheers,
    Ben

  • My phone keep locking and unlocking several times

    Device info
    Your carrier: T-Mobile
    Model info and OS version: Curve 8900 and Blackberry OS v4.6.1.231
    Apps and free space
    Did a battery pull fix your issue? Temporarily
    Apps installed and their version if possible: No apps because I do not have internet on the phone
    When writing your question
    Good description of what is really wrong and how to reproduce if possible. Details of what you did before:
    I didn't do anything to it but before the speaker would fuzz in and out of call and then it started doing that permanently. Afterwards my phone just started to lock and unlock several times before it ultimately locked me out even after I tried to press the unlock button. I tried pulling out the battery several times and it alleviates the symptoms for about 3 minutes and it goes right back to locking and unlocking again. I have no idea what is wrong but I appreciate any responses and Thank You in advance.

    Hello
    Usually I would advise a hard reset of your handset, but it doesn't seem like it's possible if you only have access to your handset for a few minutes before the fault occurs.
    Go to www.blackberry.com and download the blackberry desktop manager, then use this to update your handsets software, I have seen the desktop manager not recognise there is an update from an 8900 on OS 4.6, if this happens you can find the newest 8900 software on the blackberry website - download this and install it to your PC. Once it's downloaded you need to search for updates in the desktop software and when it says none available select 'view previous versions', then select the software you just downloaded.
    Hope this helps
    Adam
    EE Blackberry Specialist

  • IPhone 5 unresponsive screen, have to lock and unlock to fix

    HI PEOPLE, i have the following problem, i bought the iPhone 5 white 32 gb , 4 monts ago, the problem started this week, my touch screen dont respond somethimes, but everything else works, like the home button, volume keys, etc. the solution is lock and unlock to get it working again, but in question of minutes starts failing, i did a restore 3 times and a DFU restore just in case, im really worried because i live in argentina,i went to North America for the winter,and i cant go back to EE.UU to get a replacement, please help , for what i think its not a hardware problem, because it works really well, when it works,but i dont know.

    OK I GOT IT, i hace the solution, my iPhone was running out of ram, so it freezes and I need to lock and unlock to free a little bit of it so it can work again, but the ram goes low in seconds, I used an app called BatteryDoctor, it has a free ram option and now it works flawlessly.

  • How do i use the "Alt+Ctrl+;" keyboard shortcut to Lock and Unlock Guides in Adobe Illustrator?

    Hello,
    I've been trying to lock my guides in Illustrator CS5 with the default keyboard shortcut "Alt+Ctrl+;", but with no result.
    When i edit this shortcut via the 'Edit/Keyboard Shortcuts...' menu, and type in the same keystroke combination for that command - so again "Alt+Ctrl+;" for "Lock Guides' - the shortcut changes from "Alt+Ctrl+;" into "Alt+Ctrl+."
    This new "Alt+Ctrl+." shortcut is usable. Now the same 3 different keystrokes tabbed at the same time do lock and unlock the guides, but i'm left wondering why it is that i can't use the "Alt+Ctrl+;" combination.
    There now also seems to be no way around changing the new combination into the old one again.
    I hope someone can help.
    Thanks in advance,
    Johan

    Thanks Jacob. I can't seem to find a solution to my problem within the site you linked, but i'm still happy with it. Seems to be a great resource for answers.

  • File Lock - How to lock and unlock a file ? Can we do that for an FTP File?

    Hi All,
    I like to retrieve a file from the FTP server using Apache Commons Net libraries.
    for example if the file size is 20MB. When the file is in the progress of copying or transferring from the FTP server i need to lock the local file which is in our local directory so that no other process will use the same local file which is in the process of copying otherwise partially copied files will be used by another process.
    the file should be locked when it was in the progress of copying from the server. I have an automatic process which will access file objects at certain time and try to process the files.
    I like to know the simplest and easiest way to lock and unlock a file object locally which is trying to copy a file from the FTP server which is of huge size.
    And also i like to know how to lock and unlock a file in general?
    Thanks,
    J.Kathir

    we can set it read only only when it complete finishing the writing.
    can we able to make the file as read-only while transferring data to file.
    How to achieve it ? pls give me some sample code

  • Statement for Lock and Unlock an Oracle user (Urgent)

    Hi DBAs.
    I just want to know about the statement used for lock and unlock the Oracle user thru sysdba suer.
    Thanks
    Hassan

    Hey,
    SQL> alter user <USERNAME> account lock;
    and
    SQL> alter user <USERNAME> account unlock;
    Cheers,
    Marcello M.
    Sorry Justin, same answer........
    Message was edited by:
    Marcello M.

  • Why does auto brightness has a bug in iOS 7.1.1 . The brightness switches automatically to higher in bright places but not returns to lower brightness in dark places but when you lock and unlock it becomes normal

    Why does auto brightness has a bug in iOS 7.1.1 . The brightness switches automatically to higher in bright places but not returns to lower brightness in dark places but when you lock and unlock it becomes normal

    Hello,
    Same problem for me. Really a pain in the *** this bug ! Does Apple fixed it. I'm really suprised noone reports this problem  and apple does not adress this.
    Because of that, I cannot give it anymore to children because it hurts the view. Really a shame on the part of apple !
    Regards

  • Hi how to handel the lock and unlock the table

    Hi,
    i am having the one scenario like,for lock and unlock the table i used the function modules ENQUEUE_E_TABLE and  DEQUEUE_E_TABLE but it allowing the edit the first user and suppose to try the editing the second user it is giving the error message it correct but again the second user press any button it is leaving the program it should not happened please help me that.
    regards,
    Hari.

    Hi,
    i assume it's in table JEST
    so select:
      SELECT        * FROM  JEST
               WHERE  OBJNR  =  aufk-OBJNR
                AND   STAT   IN S_STATI
    Andreas

  • Capability or admingroup to lock and unlock views

    Hi all,
    I am trying to lock and unlock users via
    lockObject(com.waveset.object.Type.USER, user, map); on a lighthouse session object and unlockObject((Object) com.waveset.object.Type.USER, user, map); on a session object
    but I get the error:
    WavesetException : com.waveset.util.WSAuthorizationException: View access denied to Subject AGROUPE1 on User: UTEST1.I tried to create an admingroup with this permission
      <Permissions>
        <Permission type='User' rights='View'/>
      </Permissions>But it didn't change the error.
    Any idea so that it could work ?

    You Can disable that functionality by disabling "Action Keys Mode" in the BIOS...
    Here is the document, that will help you with it... http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02035108&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US
    Although I am an HP employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

Maybe you are looking for