What is business one ? how is it different from sap R/3,?

Does B1 needs special expertise in SAP ?can an R/3 consultant run the transactions and customisations in B1 with ease ?please answer my queries.
REGARDS
Sunkari

hi vinod,
Some of difference between SAP B1 vs SAP R/3,
1.SAP Business One is SAP's offering for small and mid size companies, while R/3 is SAP's offering for large companies.
2.SAP Business One is a software that was bought over by SAP and it has been greatly enhanced over time,
SAP R/3 is indigenous to SAP and it has also undergone various re-engineering over time.Example: SAP ECC.
3. SAP Business One and SAP R/3 are built on the concept of client/server architecture,.SAP Business One(2-tier) client/server architecture,SAP R/3 is based on a three tier/n-tier client/server architecture.
Jeyakanthan

Similar Messages

  • What is JHeadstart and how it is different from Jdeveloper

    Hello everbody
    I am new to JHeadstart but iam quite aquinted with Jdeveloper 10.1.3, so can any body please tell how JHeadstart is better than Jdeveloper and what extra thing can we do with it

    JHeadstart is a plug in to use with JDeveloper. If you go to the JHeadstart product center you can read all about its features and benefits. http://www.oracle.com/technology/consulting/9iServices/JHeadstart.html
    Good luck!

  • TS3988 icloud email account?  what is it?  how is it different from my icloud account?

    I have a MacAir and an iPad.  When I first got the laptop, my calendar and the iPad were synching automagically.  Then one day, I tried to send a photo from iPhoto and iPhoto wanted to send it through the cloud, not my mailer.  What's that about, by the way.  And then I must have done something and the synching between machines stopped.  Any ideas?

    See http://support.apple.com/kb/PH2617.  (Your iCoud ID is an Apple ID, and you reset the password the same way you reset the password for any Apple ID.)

  • What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?

    Hi All,
    I am new to TestStand. Still in the process of learning it.
    What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?
    Thanks in advance,
    LaVIEWan
    Solved!
    Go to Solution.

    Hi,
    Using the Parameters is the correct method to pass data into and out of a sub sequence. You assign your data to be passed into or out of a Sequence when you are in the Edit Sequence Call dialog and in the Sequence Parameter list.
    Regards
    Ray Farmer

  • What is Business one and its use?

    Hi
    I would like to know abt Busniess one and why it is used. Also Is it poosible to integrate with SAP XI. If yes what kind of adapter we need to use.
    Looking for ur response.
    thkx
    Prabhu

    Hello,
    I  am looking for about it in SAP notes and these followings are the result ;
    Installation of SBO ITK 1.5 and apply ITK 1.5 SP1
    Other terms
    SAP Business One, ITK, SAP J2EE Engine 6.20
    Reason and Prerequisites
    1. Microsoft windows 2000/XP has beeninstalled.
    2.Microsoft SQL Server 2000 & SP3 has been installed.
    3. SAP Business One (SBO) 6.50.52 has been installed.
    Solution
    Required components:
    1. JDK 1.3.1_08 (j2sdk-1_3_1_08-windows-i586.exe can be downloaded from <http://java.sun.com/products/archive/j2se/1.3.1_08/index.html>)
    2. Microsoft SQL Server 2000 Driver for JDBC SP1 (sql2k_jdbc_sp1_setup.execan be downloadedfrom <http://www.microsoft.com/downloads/details.aspx?FamilyID=4f8f2f01-led7-4c4d-8f7b-3d47969e66ae&DisplayLang=en)
    3.SAP BusinessOne Data Interface API (DIAPI) 6.50.52
    4. SAPBusinessOne Java Connector 6.5
    5. SAP Business One Integration Toolkit1.5
    6. SAP Business One Integration Toolkit 1.5 SP1
    7. Tools to do the patch for *.exe files: editbin.exe, dumpbin.exe, link.exe, MSPDB60.DLL, which are included in Microsoft Visual Studio.
    To install SBO ITK 1.5 SP1 correctly, please follow the steps: (We recommend ITK 1.5 be installed on the same host with SBO)
    0. Logon the host with the user in Local Administrator group.
    1.Backup SBO Databases
    Backup database Sbo_Common and all company databases for safety
    2.Install JDK 1.3.1_08
    Run j2sdk-1_3_1_08-windows-i586.exe.
    3.Set environment variables JAVA_HOME and PATH:
    JAVA_HOME=C:\jdk1.3.1_08, if JDK installation is C:\jdk1.3.1_08.
    PATH = %JAVA_HOME%\bin;%PATH% , make sure to put the Java Path at the beginning of the path.
    4.Install MS JDBC for SQL 2k SP1:
    Run sql2k_jdbc_sp1_setup.exe.
    5.Install SBO ITK 1.5 and REBOOT computer
    Don't install DI-API by deselecting DI-API component in setup dialog box. We will install the latest DI-API for SBO 6.50 later.
    Suppose ITK 1.5 is installed driver C. You should see C:\SAP_J2EEngine6.20 and C:\Program Files\SAP\SBO Integration Toolkit after installation.
    6.Install SBO ITK 1.5 SP1
    Download the ITK 1.5 SP1 from http://service.sap.com/sbo-swcenter
    Upgrades/Patchs->SBO-MYSAP INTEGRATION TOOLKIT ->
    SBO-MYSAP INTEGRAT.TOOLKIT 1.5->Binary Patches SBO-FUNCTION MODULES
    1.5 -> Win32 -> BOXIFM1501_0-20000137.ZIP
    Unpack the zip and run setup.exe
    7.Install DI-API from <
    127.0.0.1\sbo_shr\SBODIAPI>
    DI-API always exists on the SBO server.
    8.Install SBO Java Connector and copy jar files:
    Refer to note 676364 (Don't douninstallsteps since we don't install
    DI-API) , install latest SBOJavaConnector and
    Copy sbowrapper.jar and sboapi.jar
    FROM C:\ProgramFiles\SAP Manage\SAP Business One\SDK\JavaCon\lib
    TO C:\ProgramFiles\SAP\SBO Integration Toolkit\SBOFunctionModuleSDK
    and C:\SAP_J2EEngine6.20\alone\services\servlet_jsp\work\jspTemp\
    SBOWebService\root\WEB-INF\lib
    9.Check HTTP/HTTPS port:
    If HTTP/HTTPSport is conflicted withotherWeb Application Server on
    same host, for example IIS, change HTTP/HTTPS portofthe SAP J2EE
    server by Config Tool.
    Start -> All Programs -> SAP J2EE Engine 6.20 -> Tools -> Config Tool
    10.Apply note 706379 to patch java.exe and service.exe:
    Java.exe is inthedirecotry %JAVA_HOME%\bin, service.exe isinthe
    direcotry C:\SAP_J2EEngine6.20\configtool.
    Use the following command
    editbin.exe /stack:2097152 service.exe
    editbin.exe /stack:2097152 java.exe
    11.Start J2EE server
    Use Start -> All Programs -> SAP J2EE Engine 6.20 -> Stand Alone Server
    12. Create J2EE user, change admin password
    For securityreason,password of Administrator must be changed. Another
    user in administratorgroup should be created for daily operation.
    Use Start -> AllPrograms-> SAP J2EEEngine6.20 -> Administrator.
    This task is performed using "User Management" in the "Runtime" tab of
    Security Service.
    13. Test ITK 1.5 SP1 connection
    In browser,open the URL "<http://localhost:port/SBOWebService>",
    SAP Business One Integration Toolkit workbench could be openned.
    (Refer to Administration Guide for following steps)
    14.Switch on DEBUG log
    In SAP Business One Integration Toolkit workbench->settings->Logging,
    set .severity = DEBUG
    After everything runs fine, you should set the log back to INFO mode
    for performance purpse.
    15. Set DI-API connection:
    In SAP Business One Integration Toolkit workbench->settings->DI API,
    set the connection parameters for SBO DIAPI.
    16. Set Sender and SAP XI
    In SAP BusinessOneIntegration Toolkit workbench->settings->Sender,
    Setthe Sender properties. The properties [name].port and [name].uri
    can be get from XI server by transaction code SMICM, SICF.
    17.Set Windows Application Event Log to recycle
    Control Pannel->AdministrativeTools->Event Viewer->Application->
    (Context menu)Properties->General->Log size->Overwrite events as needed
    18. Restart ITK 1.5 SP1 to check DI-API connection
    In the windowof Stand Alone Server, type "reboot". After rebooting,
    open SAPBusinessOne Integration Toolkit workbench , open server log
    in Logs-> Server tocheckthe status of DIAPI connection pool.
    IfDIAPI connection pool initialized successfully, followingline
    could be found:
    Info: initialize DI-API connection pool.
    Info: initialize DI-API connection pool successfully.
    19.Switch off DEBUG log
    In SAP Business One Integration Toolkit workbench->settings->Logging,
    set .severity = INFO
    20. Shutdown J2EE
    In the window of Stand Alone Server, type "shutdown".
    21. Config J2EE server running as Service, Optimizememory (at least 128M , default is 64M)
    Use Start->All Programs->SAP J2EE Engine 6.20->Tools->Config Tool to open Config Tool.
    Clicknode "Alone", in "NTService"tab,select"Enabled", andchange
    the memory size in "Java parameters" with following lines:
    -Dmemory.manager=128M
    -Xmx128M
    Apply changes.
    using Start ->Run -> cmd to open command window, change directory to
    C:\SAP_J2EEngine6.20\configtool,runcommand "service -install" to
    install J2EE server as Service. (To remove the service, run command
    "service -remove")
    22. Start J2EE as service
    In Control Pannel->Administrative Tools -> Services, find service
    "SAP J2EE EngineAlone",Open thepropertiesof the service and config
    the service to Log On as the current user ("Log On" tab -> Log on as:
    This account)
    23. Test Connection
    Open SAP Business One Integration Toolkit workbench to check log file.
    I do not understand a lot but I think you could do that. In the SBO 2007A, it will be mor easy.
    Rgds,

  • What is Lightroom for?  How is it different from Photoshop?

    What is Lightroom for?  How is it different from Photoshop?

    Hi stephen,
    for detail information, read this : https://forums.adobe.com/message/4568487
    regards

  • What is Business one Module ?

    Hi SD Gurus,
    What is Business one Module ? Plz answer me as  soon as possible in details.
    Regards
    Rajarshi

    Hello RAJARSHI BHATTACHERJEE
    <b>***please reward if this helps**</b>
    SAP Business One is an integrated enterprise resource planning (ERP) software owned by SAP AG that targets business software requirements of small and medium sized enterprises (SMEs).
    SAP Business One contains 14 "core modules":
    •     Administration Module = where configuration is performed
    •     Financials Module = where various accounting and financial activities are conducted
    •     Sales Opportunities Module = where existing customers and potential amounts are structured tracking
    •     Sales Module = where orders are entered, shipped and invoiced
    •     Purchasing Module = where purchase orders are issued and goods received into inventory
    •     Business Partners Module = where Business Partners (customers, vendors, and leads) are contacted and maintained
    •     Banking Module = where cash is received and paid out
    •     Inventory Module = where Inventory is valued and managed
    •     Production Module = where bill of materials is defined and manufacturing is tracked
    •     MRP Module = where purchase and production planning takes place
    •     Service Module = where after-service products are managed
    •     Human Resources Module = where employee information is kept
    •     Reports Module = where user-defined reports are generated (as printouts or Excel files)
    •     E-commerce= allowing customers to buy and sell online to consumers or other businesses.
    Regards
    AK

  • Why we extend JFrame in java swings? how is it different from code not ...?

    how is it different from code nt extending JFrame?
    please explain the role of contentpane in both cases?
    thanx

    Search the net for examples and/or explanations of "inheritance vs composition.
    For the role of a contentPane, read the API for interface RootPaneContainer and class JRootPane. The second named API also has a link to the Swing tutorial on How to Use Root Panes.
    db

  • Wat is work flow and how is it different from bpm

    wat is work flow and how is it different from bpm

    Hi, please put a bit more effort in your quest for knowledge. This link:
    <a href="https://wiki.sdn.sap.com/wiki/display/HOME/BusinessProcessManagement">https://wiki.sdn.sap.com/wiki/display/HOME/BusinessProcessManagement</a>
    is accessible from this forum and has everything you need to know. I suggest you first read everything there is to find there.
    Kind regards, Rob Dielemans
    Message was edited by:
            Rob Dielemans
    Rob Dielemans

  • What are Struts and how it is used in SAP

    Hi
    can anyone give a idea that what are struts and how it is used in SAP
    Regards
    JM

    Hi John,
    In this case google.com really us your friend - Struts is not an SAP technology, rather it is an MVC development paradigm (love using that word for Java.  There are lots of useful websites with generic information around struts as well as a number of good books available from Amazon for instance.
    As far as Struts and SAP goes - SAP use Struts for their Internet Sales CRM Webshop application.  Of course, like anything else from SAP it has been modified slightly but is essentially the same.
    Gareth.

  • How to extract data from SAP in FDM 11121

    I came across some documents from version 11113, says there is a SAP adapter, however ,when I check 11121 there's no such adapter, does anyone know how to extract data from SAP in FDM 11121?

    I download a package from Bristlecone, but I dont see any xml files in it, just a bunch of dll and I didn't find any instructions on how to set up/configure in FDM, it just explained how to register in SAP app server and client.
    Hyperion 11113 has readme on sap adapter(Hyperion Readme Template), but I cannot find the same readme file in 11121, all I can find is ERP Integration Adapter document. any idears where I can find at least a readme document?

  • How to Pull data from sap r/3 tables to oracle tables

    how to fetch data from sap r/3 tables & data pulled to oracle table .
    GIVE THE APPROPRITE ANSWER FOR THIS.
    THANKS IN ADVANCE.
    If it is useful for me , i am giving point.
    regards ,
    Navita
    Edited by: NAVITA YADAV on Mar 7, 2008 2:07 PM
    Edited by: NAVITA YADAV on Mar 7, 2008 2:08 PM

    You need to perform some native SQL to fetch data. Before doing this connection must be exists b/w your R/3 and Oracle server.
    Basis team will help you to have connection.
    Check the connection name in the table DBCON.
    Check the below code to handle native SQL.
      SELECT SINGLE  DBMS
               FROM  DBCON
               INTO  DBTYPE
               WHERE CON_NAME = DBS.
      IF DBTYPE = 'ORA'.
        TRY.
          EXEC SQL.
            CONNECT TO :dbs
          ENDEXEC.
    ERROR Handling for Native SQL *************
          IF SY-SUBRC <> 0.
            MESSAGE `Docusphere connection failed.` TYPE 'I'.
            EXIT.
          ENDIF.
      EXEC SQL PERFORMING loop_output.
        OPEN C1 FOR
        SELECT  UK1, UK7, uk6, uk9, uk22, uk23, uk25    "field names of Oracle table
        FROM IIS_DOCS_AP10D
        WHERE ( UK2 = 'ZFIINVOICE' OR UK2 = 'ZFIPAYREQ' )    AND
        UK19 = 'E'                                           AND
        UK20 IS NULL
      ENDEXEC.
          DO.
            CLEAR W_OUTPUT.
            EXEC SQL.
              FETCH NEXT C1 into :wa1-arc_doc_id, :wa1-bukrs, :wa1-belnr, :wa1-gjahr, :wa1-wi_id, :wa1-ARCH_METHOD, :wa1-barcd.
            ENDEXEC.
    enddo.
    Reward points if helpful.................

  • HOW to retrive data from SAP Tabel

    Hi Friends,
       1)Can you please explain how to retrive data from SAP table(example AFRU).
       2) we had requriment based on the qunatity , Product name and date we need to display KPI's .KPI is based no products manfactured per day with some conditions
    Regards
    Srikanth

    Hi Udayan,
        I want to retrive SAP Table data from xMII.can you please explain elabarately how to call "RFC_READ_TABLE" from xMII.
    please do the needful
    Thanks
    Srikanth

  • How to extract data from SAP 4.7 and upload data to SAP ECC 6.0

    Hi,
        How to extract data from SAP 4.7 and upload data to SAP ECC 6.0? Can i use BDC,BAPI,LSMW? Help me please.

    hi
    good
    both works not possible simultaneously.
    If you want to do it in two separate task than you can use the GUI_UPLOAD function module to fulfill your requirement.
    thanks
    mrutyun^

  • How to send SMS from SAP to Any mobile

    Hi Friends,
    I have a requrement. How to send SMS from SAP to Any mobile?? For Example: If i created PO in SAP then i want to send a SMS to Concerned Vendor and HOD.
    Please provide the pre-requisites?
    Naveen

    Hi Naveen,
    there is a standard webservice globally available called Send SMS and you can consume that webservice with the help of CAF and you can send PO number as SMS, If the standard webservice do not work then you have to create your own webservice to fulfill the functionality.
    Regards
    Manohar

Maybe you are looking for