What is causing error 50202

After many hours (24-48 typically) of running, my application displays the error message shown above (error 50202).  The application sequentially fires outputs with NI 9485 modules and checks input voltage on a 9201 module, and then appends data to a text file.  The modules are installed on a cDAQ-9172 chassis.  A new text file is created every 12 hours.
When this error occurs, the computer seems to be running low on resources.  I could not launch windows explorer and wordpad simultaneously to grab the screen shot above.
The application was developed on Labview 10.  It is deployed on a Windows XP machine.
Any troubleshooting advice would be greatly appreciated.

No, I'm not recreating the task.  I have added attachments of my code.
I originally used the DAQ Assistant to build my acquisition code.  That was in a loop.  I then exploded that into various components and moved the sub-vi containing the create task outside the loop.
Attachments:
Low Cost Keypad Test.vi ‏115 KB
Read Voltage In Task.vi ‏16 KB
Write Digital Out Task.vi ‏17 KB

Similar Messages

  • What is causing error 28 which hardware

    what is causing error 28 which hardware

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
     Cheers, Tom

  • What may cause Errors.log to be generated from Essentials configuration wizard?

    I customized install.wim to handle specific drivers, and while the OS installs properly... during the Essentials Configuration Wizard, the process nearly immediately stops at 0% and generates this file "Errors.log" with the contents:
    FATAL: SetFolderPermission:
    Is it just a corrupted install.wim, that just so happens to prevent the wizard from working... or did I accidently change permissions on something that would lead to this type of error?

    Well you finally lost me :) Any data partitions are pretty much irrelevant until after Essentials is done installing
    Essentials does not get it "installed", Windows gets Installed, and then Essentials "Configures".  As I said part of this configure is to decide where the largest data partition is.  The team does not do tons of what if's in
    the Dev cycle. I have no clue what that code/logic actually is, but I am certain it went no deeper than a normal standard Server install.  They did not test different allocation units, smaller than standard "hidden partitions with drive letters.
    This said, I was able to complete the Essentials configuration using my unattend.xml with 100, 350, and 328.  I used diskpart to assign letters to the 100 and 350, and formatted a 70 gb "data" partition with the 64k and gave it B: But I am
    confused as after Essentials config finished the 100 and 350 did not have drive letters?  Also when I assign the letters it was not reflected in diskmgmt.msc.  Right click still only showed Help.  But File Explorer did.
    So my ask would be that you edit your winpe to,  100, 350, and 328, and format the system drive with 4k and see if that works for you. Then we/you could change things one at a time to see what breaks it.
    All this said, even if we can figure out what breaks it and I file a bug they may acknowledge it is a bug but will mark it as will not fix in this build, and the next build.  If we can explain to the Dev team why it should work this way, that this is
    the future of Server installs they may look at changing it in V.next.next t be shipped, who knows when. 3 years from now?
    Grey

  • What is causing error code 11556

    i have cable dsl, windows 8.1 pro, hotspot shield elite, and panda security fire wall.  i cannot sign in at all.  my internet is always connected.  error code 11556 keps popping up.

    error code 11556 keps popping up.
    Try the "Error -11556" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • Photoshop CS4 for Mac What can cause the error: Plug-in failed to load - NO VERSION

    With Photoshop CS4 for Mac I install the Kodak Plug-in DIGITAL GEM Airbrush Professional v2.1.0. When Photoshop starts I get an error:
    Plug-ins that failed to load:
       DIGITAL GEM Airbrush Professional v2.1.0 NO VERSION -  - from the file “DigitalAIRProv2.plugin”Flash:
       Connections
       Kuler
    This plug-in works fine on my Mac Pro with Photoshop CS4 and OS 10.6 but fails on a new Macbook Air.
    Reinstalling the plug-in did not make any difference. What can cause this error?

    Thanks Chris, That was my first thought too but this same plug-in works on another installation of CS4. This is a Mac installation and the plug-in is Universal so it should work. Is there any other possible cause for this error? Would Photoshop refuse to load a plug-in in a low memory situation?
    Also, The Flash extensions:Connections and Kuler are working OK, I just copied a little more out of the System Info report than I needed to.

  • What has caused "data error count"  under execution detail on Audit browser

    Hi,
    I have a simple mapping that load data from external table to target fact table. From OWB Runtime Audit browser, the Execution Details page show the status= Complete + <Red error sign>. And the value under Data error count is 2563. Where can I look for information about what has caused this errors or what the data error are? The SQL*Loader log file looks OK and no bad file generated. And I don't see suspecious under WB_RT_AUDIT*, WB_RT_ERROR tables It's owb9ir2 on 9iDB Thanks.

    Solved. I set the audit level to the highest and re-executed and can see the error msg now. It would be nice if audit broser can show the report for all the rejected rows.

  • I get an "Exeeded Limit" error from iTunes Match, but I only have 18000 sings in my library. What might cause that?

    I get an "Exeeded Limit" error from iTunes Match, but I only have 18000 sings in my library. What might cause that?

    Try posting in the iTunes Match forum, you'll probably find more knowledgeable folks there.
    https://discussions.apple.com/community/itunes/itunes_match

  • Unable to access endpoints error. What might cause it?

    I got the below error
    “Unable to access the following endpoint(s): https://secure-ausomxdsa.crmondemand.com/Services/Integration”
    I copied and pasted the below url into a browser and I got the “Page Not Found” error
    https://secure-ausomxdsa.crmondemand.com/Services/Integration?wsdl
    Do you know what might cause this error?
    Thanks

    Hi, ok now I see, no you don't if you use bpel, but anyway the ?wsdl url is not reachable in on demand. Url https://secure-ausomxdsa.crmondemand.com/Services/Integration is right if you are on pod "dsa". I'm not that familiar with bpel but as far as I know it's simply loading the wsdl into your bpel process and use WS-Security for server side session handling. If you don't send security headers you have to define a login step first but normally this is not necessarry if you add ws security header in your requests.
    Best Regards
    SL

  • What could cause "Internal error: java.lang.NullPointerException: can't not add null to SWF frame" when using compc?

    using flex sdk 4.6, and air sdk 15.0.0.356
    we get the following error when using compc in our ant build:
    [java] Internal error: java.lang.NullPointerException: can't not add null to SWF frame
    [java] at com.adobe.flash.swf.SWFFrame.addTag(SWFFrame.java:77)
    [java] at com.adobe.flash.compiler.internal.units.requests.SWFTagsRequestResult.addToFrame(SWFTagsR equestResult.java:114)
    [java] at com.adobe.flash.compiler.internal.targets.SWFTarget.addCompilationUnitsAndDependenciesToF rame(SWFTarget.java:398)
    [java] at com.adobe.flash.compiler.internal.targets.SWFTarget$FramesInformation.createFrame(SWFTarg et.java:838)
    [java] at com.adobe.flash.compiler.internal.targets.SWFTarget$FramesInformation.createFrames(SWFTar get.java:875)
    [java] at com.adobe.flash.compiler.internal.targets.SWFTarget.build(SWFTarget.java:243)
    [java] at com.adobe.flash.compiler.internal.targets.SWCTarget.buildLibrarySWF(SWCTarget.java:348)
    [java] at com.adobe.flash.compiler.internal.targets.SWCTarget.build(SWCTarget.java:128)
    [java] at com.adobe.flash.compiler.clients.COMPC.buildArtifact(COMPC.java:144)
    [java] at com.adobe.flash.compiler.clients.MXMLC.compile(MXMLC.java:541)
    [java] at com.adobe.flash.compiler.clients.MXMLC.mainNoExit(MXMLC.java:230)
    [java] at com.adobe.flash.compiler.clients.MXMLC.mainNoExit(MXMLC.java:184)
    [java] at com.adobe.flash.compiler.clients.COMPC.staticMainNoExit(COMPC.java:75)
    [java] at com.adobe.flash.compiler.clients.COMPC.main(COMPC.java:62)
    which seems to be rather vague, and offers no clue as to what caused the problem. so, my question is, what could cause this error?
    these are the compiler options we use in the build file:
    <java jar="${flex.compc.jar}" dir="." fork="true" failonerror="true">
          <jvmarg value="-Xmx512m" />
          <arg line="@{options} ${_compc.libpath} ${_compc.externspath} ${_compc.includespath}" />
          <arg value="+flexlib=${flex.frameworks.dir}" />
          <arg value="-load-config=@{config}" />
          <arg value="-source-path=@{src.dir}" />
          <arg value="-include-sources=@{src.dir}" />
          <arg value="-output=@{dest}" />
          <arg value="-swf-version=@{swf.version}"/>
          <arg value="-debug=${flash.debug}"/>
          <arg value="-advanced-telemetry"/>
    </java>
    assume that the properties resolve to correct values, since all projects (except one) call this task and compile successfully. the error must come from this one project that fails, but we don't know why.
    any ideas?

    You could be running out of memory, try increasing the -Xmx512m value to -Xmx1024m or another value that you prefer

  • What would cause multiple error lines to appear using validator logic

    What would cause multiple errors to appear for a single line as shown below. I coded Regular Expression Validator with a specific matching pattern and all the patterns work fine. When I key in an invalid pattern on a row I get the following errors dislayed. Why am I getting multiple error lines instead of one. Also when the data in the field is in error the field gets cleared. How do I fix this problem?
    Error
    java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    - JBO-ObjectCode_Rule_1: Object must be in range 8000-8999 or object must be in form of 8%, 8n%, 8nn% where n represents a number.
    - JBO-27008: Attribute set for ObjectCode in view object AccountsecuritygroupobjView2 failed
    - JBO-ObjectCode_Rule_1: Object must be in range 8000-8999 or object must be in form of 8%, 8n%, 8nn% where n represents a number.
    - JBO-ObjectCode_Rule_1: Object must be in range 8000-8999 or object must be in form of 8%, 8n%, 8nn% where n represents a number.
    - JBO-27008: Attribute set for ObjectCode in view object AccountsecuritygroupobjView2 failed
    - JBO-ObjectCode_Rule_1: Object must be in range 8000-8999 or object must be in form of 8%, 8n%, 8nn% where n represents a number.

    Looks as though my RegEx script is not coded properly so it is causing the problem.
    This is my regex script
    8([0-9]{3})|8([0-9]{0,2}\%)
    I changed the script above to the following to slowly build the script back to get rid of these multiple errors that are appearing. When I set my regex script to the following then I just get the one error line.
    ([0-9]{4})
    I thought the regex script was working but when I key an invalid value I get 8 error lines as shown above. That should not be happening. This regex script
    8([0-9]{3})|8([0-9]{0,2}\%)
    is to perform the following logic:
    The field I am editing is 4 characters long.
    1) The first character must be an 8 and the next 3 charaters must be any character from 0-9
    OR
    2) The first character must be an 8, the next 0-2 characters must be any character from 0-9, the next non-blank character after any digits must be a wild card character of %
    Examples: any number from 8000-8999, 8%, 8n%, 8nn% where n is any number from 0-9
    Edited by: cwilbur on Sep 14, 2011 1:28 PM

  • Alert! The page yu are trying to view cannot be shown because an erros in the data trabnsmission was detected. What is causing this error?

    when visiting the website www.ontwowheels.nl I get the error:
    Alet. The page you are trying to view cannot be shown because an erros in the data transmission was detected. I than have to clear my history before I can see the page once. After a visit I get the Aleret again. What can cause this error? When I use IE there is not such a problem. Also when I use IE TAB all is fine

    From the http log:<br>
    <br>
    nsHttpTransaction::ParseHead [count=236]<br>
    nsHttpTransaction::ParseLine [HTTP/1.1 304 Not Modified]<br>
    nsHttpResponseHead::ParseVersion [version=HTTP/1.1 304 Not Modified]<br>
    Have status line [version=11 status=304 statusText=Not Modified]<br>
    nsHttpTransaction::ParseLine [Content-Type: text/html]<br>
    ParseContentType [type=text/html]<br>
    nsHttpTransaction::ParseLine [Content-Length: ]<br>
    invalid content-length!<br>
    nsHttpTransaction::Close [this=4e23aa0 reason=804b001d]<br>
    nsHttpConnectionMgr::ReclaimConnection [conn=d1e980]<br>
    STS dispatch [3b04b20]<br>
    nsHttpConnection::CloseTransaction[this=d1e980 trans=4e23aa0 reason=804b001d]<br>
    nsHttpTransaction::Close [this=4e23aa0 reason=804b001d]<br>
    <br>
    Firefox is receiving malicious content-length<br>
    Reason 804b001d ->> NS_ERROR_CORRUPTED_CONTENT <br>
    A transport level corruption was found in the source document. for example<br>
    a document with a calculated checksum that does not match the Content-MD5<br>
    http header.<br>
    <br>

  • HT1218 What causes error "Network Host 192.16x.0.1 is busy. Will retry in 30 seconds."

    Wireless Printer error shows network host as busy. Cannot reconfigure to re-connect. It was printing ok. Then I tried to scan a doc and then it wouldn't print again. I have internet access. Receive email, etc.  Tried reinstalling the printer software several times. Printer says it has successfully completed connection to the Router. But I continue to get the error "Network Host is busy. Will retry in 30 seconds." And it never prints. Also, printer config option is greyed out.
    1. What root cause generates that error message?
    2. What settings should I reconfigure?
    3. How do I re-configure settings?
    I am not a techie...a busy frustrated Grandma at home. Need step by step, just to get to the right menu.
    Thanks for help.

    Hi Greg:
    Thanks for the response.
    Sorry, I'm using IPP. As an experiment, I printed a test page from Firefox running locally on the server, and that prints fine. So I have pointed CUPS at the right printer driver.
    The other thing I've tried is to reset the printing system on the iMac by control-clicking in the area below the listed printer in the Print & Fax dialog and saying yes to "are you sure" when it warns about resetting the printing system. That leaves a blank pane. Then I started Word,
    and invoked print. It came up with no printer selected, but offered a choice of the HP. When I select that, I see messages about gathering printer info (I expect that's Bonjour doing its thing), and the printer re-appears in the Print and Fax pane. When I "Print", I'm back to the usual problem.
    Do you think I have something set incorrectly in the router?
    Thanks.

  • What is causing this system error and how do I fix it?

    The following system error appears every few seconds in the system log of my wife's computer:
    Aug 27 14:19:57 Dee-Coopers-iMac mds[35]: (Error) Import: importer:0x884600 Importer start failed for 501 (kr:268435459 (ipc/send) invalid destination port)
    Aug 27 14:20:27: --- last message repeated 7 times ---
    Aug 27 14:20:29 Dee-Coopers-iMac mds[35]: (Error) Import: importer:0x884600 Importer start failed for 501 (kr:268435459 (ipc/send) invalid destination port)
    Aug 27 14:20:59: --- last message repeated 7 times ---
    I have run Tech Tool Pro Advanced Tests, repaired the permissions, and restarted the computer multiple times but noting has fix the error. What is causing the error and how do I fix it?

    Last night I revisited the problem and discovered that I had not emptied the Print Shop Importer from the trash. I emptied the trash, restarted the computer, and the error messages stopped. Also before I restarted the computer I noted that Time Machine had stopped backing up and that Spotlight was indexing the hard drive. I blocked the indexing before I restarted the computer. In any event the original problem seems to be fixed.

  • What would cause this error Local/ESSBASE0///Error(1051506) ?

    Hi,
    Our users could not connect to Essbase after automated maintenance until the Essbase services were restarted. The error log shows the following error:
    [Sun Dec 12 02:55:34 2010]Local/ESSBASE0///Error(1051506)
    Getting project for application [Essbase:MYAPPLICATION:1] failed with Error [CSS Error: Internal Error. Function getProjectForApp]
    Does anyone know what this means or what would cause this? We're on system 11.1.1.3 and never had this issue before. Serched around but there's not much information on this issue.
    Any help would be really appreciated.
    Thanks

    error says about problem in work with Shared Services
    backup all before fixing
    check shared services working
    check project folder
    check application
    try new provision to essebase
    check css setting ib essbase.cfg
    if error in registration
    - try re-register shared service

  • HT203164 I am getting an error 2131, attempt to burn a disc failed.  What might cause this?

    I am getting an error 2131, attempt to burn a disc failed.  What might cause this?

    Maybe you should post in the iTunes forum or other appropriate forum. This is the iPod touch forum and the iPod can't burn CDs.

Maybe you are looking for