What is CGXDisableUpdate?

Hi all,
Anybody knows why I am having this kind of error (with iPhoto and iMovie mainly)?
8/17/12 8:21:31.507 PM WindowServer[67]: CGXDisableUpdate: UI updates were forcibly disabled by application "iMovie" for over 1.00 seconds. Server has re-enabled them.
8/17/12 8:21:36.975 PM WindowServer[67]: reenable_update_for_connection: UI updates were finally reenabled by application "iMovie" after 6.47 seconds (server forcibly re-enabled them after 1.00 seconds)
Thanks in advance.
Best Regards.

Did you ever figure this out? I get the same thing every time I click "All My Files" under Mountain Lion in Finder.
See:https://discussions.apple.com/message/20081701#20081701

Similar Messages

What is WRONG with my MAC G5?

Hi all,
I've posted several times in various forums about a number of problems I've been having that remain unresolved, and would like to appeal once more for help. I have a 6 year old 2GHz PowerPC G5 (2004) with 4GB of RAM, running FCS 6.0.6 and OS 10.5.8. I must reiterate that, despite the computer's age, it was working just fine until a kernel panic in December that has since left the computer feeling sluggish. I've performed a clean install (twice) of both the OS and FCS. I've bought new RAM and reseated in every possible way. I bought a new external harddrive (used to store my media) in case that was the culprit. I even took the computer and display into an Apple Store where they tested it for 2 days finding "nothing wrong with it". Yet even they couldn't get the "High" quality setting back in FCP. It defaults to medium now (unlike before) - which is my biggest concern. The computer's internal drive has 30% free space. The external more than 15%. And naturally, I've repaired permissions and trashed pref files, etc., with no results. Oh! And I've run the Hardware Diagnostics disk, three times, and everything keeps passing. I also just cloned the internal Maxtor drive onto an external Lacie drive and booted up from that - with no obvious improvement. Trying to eliminate the hard drive as a factor.
One more symptom -- perhaps related, perhaps not -- is that I can no longer put the computer to sleep without it crashing, followed by jet engine fans coming on. This happens every single time. Unfortunately it wasn't happening (as frequently) when I took the computer to the Apple geniuses.
And last week, when I turned the computer on, the screen remained black. The LED flashed in what I think was a series of three fast flashes. I rebooted and everything has been fine since (with the display).
I think I've found some suspicious items in the console logs. But I don't have a clue how to accurately read them or fix the problem. Can someone please help me?
The windowserver_last.log is full of the following:
May 21 10:57:47 52 kCGErrorIllegalArgument: CGXGetWindowWorkspace: invalid window id: a2
May 21 10:58:33 52 kCGErrorFailure: CGXDisableUpdate: UI updates were forcibly disabled by application "Final Cut Pro" for over 1 second. Server has re-enabled them.
May 21 10:59:42 52 kCGErrorFailure: CGXDisableUpdate: UI updates were forcibly disabled by application "Final Cut Pro" for over 1 second. Server has re-enabled them.
May 21 11:03:52 52 kCGErrorFailure: CGXDisableUpdate: UI updates were forcibly disabled by application "Final Cut Pro" for over 1 second. Server has re-enabled them.
Then there's these ones that keep popping up in the console or system logs:
24/05/10 1:47:43 PM /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro115 _RemoveTimeTask(), the current time manager task 0x416c943c being removed is also currently executing its tmAddr routine, so unexpected things may result ( Radar #4555679 ).
24/05/10 1:48:39 PM Final Cut Pro115 startDelayedNoDataDetection
(the startdelayed... is probably due to dropped frames during capture with stop/start detection on)
These ones are less frequent, but still showing up:
22/05/10 6:30:17 PM Dock104 QL ERROR Generator database update takes too long... we will use what we currently have
May 17 16:22:07 macdaddys-power-mac-g5 Finder100: QL ERROR Generator database update takes too long... we will use what we currently have
May 18 08:56:18 macdaddys-power-mac-g5 Finder96: QL ERROR Generator database update takes too long... we will use what we currently have
May 18 13:03:07 macdaddys-power-mac-g5 Finder101: QL ERROR Generator database update takes too long... we will use what we currently have
May 19 11:47:56 macdaddys-power-mac-g5 Finder112: QL ERROR Generator database update takes too long... we will use what we currently have
May 19 14:31:15 macdaddys-power-mac-g5 /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder118: StatusMonitor::volumesChangedCallBack returned -47
May 19 15:23:14 macdaddys-power-mac-g5 Finder102: QL ERROR Generator database update takes too long... we will use what we currently have
May 21 09:54:32 macdaddys-power-mac-g5 Finder102: QL ERROR Generator database update takes too long... we will use what we currently have
May 21 14:28:45 macdaddys-power-mac-g5 Finder111: QL ERROR Generator database update takes too long... we will use what we currently have
22/05/10 6:30:31 PM quicklookd123 QL ERROR 'Creating thumbnail' timed out for ''
23/05/10 2:27:25 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 3 seconds
23/05/10 2:27:28 PM com.apple.quicklook109 invalid #-escape sequence.
23/05/10 2:27:28 PM com.apple.quicklook109 encountered unexpected object type: 7.
23/05/10 2:27:29 PM com.apple.launchd78 (0x0-0xd00d.com.apple.AddressBook.abd112) Check-in of Mach service failed. PID 112 is not privileged: com.apple.AddressBook.abd
23/05/10 2:27:29 PM com.apple.quicklook109 xref table size mismatch: calculated 462; /Size = 463.
===============
If I had the money, of course I'd buy another computer. But I don't. And deep inside, I still believe there's a fix. Am I right or wrong???
Chris
P.S.
I don't have a clue how to read Power Fractal (suggested to someone else in another post), but here's my score:
Elapsed time: 1.6 seconds
Achieving 6261.1 Megaflops
Color Speed: 10
Maximum Count: 4096
One more thing I gleaned from another post are similar istat readings that seemed unusual to that person. Backside fans: 51rpm. ???

First thing I would do is make your post clear(-er) (I find it easier to break things down into one item per paragraph or into lists); and what HARDWARE tests and steps you have tried - that we tend to repeat over and over with system failures.
I've posted several times in various forums about a number of problems I've been having that remain unresolved,
*I have a 6 year old 2GHz PowerPC G5 (2004) with 4GB of RAM, running FCS 6.0.6 and OS 10.5.8.*
I must reiterate that, despite the computer's age...
+*it was working just fine until a kernel panic in December that has since left the computer feeling sluggish.*+
+I've performed a clean install (twice) of both the OS and FCS.+
+I've bought new RAM and reseated in every possible way.+
+I bought a new external hard drive (used to store my media) in case that was the culprit.+
+I even took the computer and display into an Apple Store where they tested it for 2 days finding "nothing wrong with it". Yet even they couldn't get the "High" quality setting back in FCP. It defaults to medium now (unlike before) - which is my biggest concern.+
+The computer's internal drive has 30% free space.+
+The external more than 15%.+ 15% is still low and can be highly fragmented, but not germaine to hardware problems.
+I've run the Hardware Diagnostics disk, three times, and everything keeps passing.+
+I also just cloned the internal Maxtor drive onto an external Lacie drive and booted up from that - with no obvious improvement.+
+Trying to eliminate the hard drive as a factor.+
I'd even say LaCie might just be one more layer of possible problems.
There are FAQs on kernel panics which:
A/ Been there, done that?
B/ Do they need to be listed (again)? revisited?
C/ panics are hardware almost always, RAM, controllers, sometimes drivers, even corrupt NVRAM
Does it boot into Open Firmware?
If yes, redo reset-nvram
If no, DOA
G5 Logicboards:
http://www.dvwarehouse.com/Power-Mac-G5-Logic-Boards-c-24553701074.html
Power Mac G5 PowerMac G5 Dual 2.0Ghz M9032LL/A, A1047 1969C
NOTE: Power Mac G5 Thermal Calibration Service It is vital for all Power Mac G5 to run thermal calibration after fitting a new logic board or processors, without it, Temperature Control will not be able to detect the system temperture correctly. As a result, it could cause the cooling fans to run at high speed, eventually damgaging the logic board or processors.
Lastly, I would never run a Mac w/o UPS, which can lengthen life and protect equipment and even the PSU.
And for $1500 the iMac Apple Store Specials can be a good fast alternative to G5.
http://store.apple.com/us/browse/home/specialdeals/mac/imac

Slow Boot with errors in kernal file - Can someone help tell me what these are?

I've been getting increasingly frustrated with the startup time on my MBP. I have copied the startup log from the kernal and highligted the few things that I am questioning why they are getting errors and hanging.. Some of these may be normal but some dont seem like it...
Im looking to see if someone can look at this log and let me know what these few things are? And maybe how to fix them?
Ideally I would love for someone to just look at it and be like "Oh, thats your problem..." I'm just not familiar enough to be able to do that....
Also, I am new to the "Apple Community" so I'm not sure the best way to deliver the information that I have, such as the log text and system specs that may be useful.. So if I just need to post the log that I copied in here, let me know..
Thanks.

Here is a copy of the log file... The things in red are what make me (a person who knows nothing) curios... Some are warnings and errors, and some I highligted just because of the time they slow things down.. Im just curious what they are and can/should they be fixed somehow?
Thanks!
6/28/13 11:40:41.000 AM bootlog[0]: BOOT_TIME 1372434041 0
6/28/13 11:40:43.215 AM com.apple.launchd[1]: *** launchd[1] has started up. ***
6/28/13 11:40:53.000 AM kernel[0]: PMAP: PCID enabled
6/28/13 11:40:53.000 AM kernel[0]: Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
6/28/13 11:40:53.000 AM kernel[0]: vm_page_bootstrap: 1989055 free pages and 91713 wired pages
6/28/13 11:40:53.000 AM kernel[0]: kext submap [0xffffff7f80737000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000737000]
6/28/13 11:40:53.000 AM kernel[0]: zone leak detection enabled
6/28/13 11:40:53.000 AM kernel[0]: standard timeslicing quantum is 10000 us
6/28/13 11:40:53.000 AM kernel[0]: standard background quantum is 2500 us
6/28/13 11:40:53.000 AM kernel[0]: mig_table_max_displ = 74
6/28/13 11:40:53.000 AM kernel[0]: TSC Deadline Timer supported and enabled
6/28/13 11:40:53.000 AM kernel[0]: corecrypto kext started!
6/28/13 11:40:43.230 AM com.apple.launchd[1]: *** Verbose boot, will log to /dev/console. ***
6/28/13 11:40:53.000 AM kernel[0]: Running kernel space in FIPS MODE
6/28/13 11:40:53.000 AM kernel[0]: Plist hmac value is    7
6/28/13 11:40:43.239 AM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
6/28/13 11:40:53.000 AM kernel[0]: Computed hmac value is 7
6/28/13 11:40:53.000 AM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
6/28/13 11:40:53.000 AM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
6/28/13 11:40:52.019 AM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
6/28/13 11:40:53.000 AM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
6/28/13 11:40:53.000 AM kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
6/28/13 11:40:53.000 AM kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
6/28/13 11:40:53.000 AM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
6/28/13 11:40:53.000 AM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
6/28/13 11:40:53.000 AM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
6/28/13 11:40:53.000 AM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
6/28/13 11:40:53.000 AM kernel[0]: corecrypto.kext FIPS POST passed!
6/28/13 11:40:53.000 AM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
6/28/13 11:40:53.000 AM kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
6/28/13 11:40:53.000 AM kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=1 Enabled
6/28/13 11:40:53.000 AM kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
6/28/13 11:40:53.000 AM kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
6/28/13 11:40:53.000 AM kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
6/28/13 11:40:53.000 AM kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
6/28/13 11:40:53.000 AM kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
6/28/13 11:40:53.000 AM kernel[0]: calling mpo_policy_init for TMSafetyNet
6/28/13 11:40:53.000 AM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
6/28/13 11:40:53.000 AM kernel[0]: calling mpo_policy_init for Sandbox
6/28/13 11:40:53.000 AM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
6/28/13 11:40:53.000 AM kernel[0]: calling mpo_policy_init for Quarantine
6/28/13 11:40:53.000 AM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
6/28/13 11:40:53.000 AM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
6/28/13 11:40:53.000 AM kernel[0]: The Regents of the University of California. All rights reserved.
6/28/13 11:40:53.000 AM kernel[0]: MAC Framework successfully initialized
6/28/13 11:40:53.000 AM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
6/28/13 11:40:53.000 AM kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
6/28/13 11:40:53.000 AM kernel[0]: ACPI: System State [S0 S3 S4 S5]
6/28/13 11:40:53.000 AM kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 0046PFM64 (36 cpu) 0xf80000000, 0x80000000
6/28/13 11:40:53.000 AM kernel[0]: [ PCI configuration begin ]
6/28/13 11:40:53.000 AM kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
6/28/13 11:40:53.000 AM kernel[0]: console relocated to 0xf80000000
6/28/13 11:40:53.000 AM kernel[0]: PCI configuration changed (bridge=16 device=4 cardbus=0)
6/28/13 11:40:53.000 AM kernel[0]: [ PCI configuration end, bridges 12 devices 16 ]
6/28/13 11:40:53.000 AM kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
6/28/13 11:40:53.000 AM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
6/28/13 11:40:53.000 AM kernel[0]: rooting via boot-uuid from /chosen: F34227E8-9960-3A1A-94A0-1D5FF8E587E4
6/28/13 11:40:53.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
6/28/13 11:40:53.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
6/28/13 11:40:53.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
6/28/13 11:40:53.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
6/28/13 11:40:53.000 AM kernel[0]: AppleIntelCPUPowerManagementClient: ready
6/28/13 11:40:53.000 AM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
6/28/13 11:40:53.000 AM kernel[0]: BTCOEXIST off
6/28/13 11:40:53.000 AM kernel[0]: BRCM tunables:
6/28/13 11:40:53.000 AM kernel[0]: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[   32] reapcount[ 128]
6/28/13 11:40:53.000 AM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/TOSHIBA MK5065GSXF Media/IOGUIDPartitionScheme/Customer@2
6/28/13 11:40:53.000 AM kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID a4b197fffe67c080; max speed s800.
6/28/13 11:40:53.000 AM kernel[0]: BSD root: disk0s2, major 1, minor 2
6/28/13 11:40:53.000 AM kernel[0]: Kernel is LP64
6/28/13 11:40:53.000 AM kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
6/28/13 11:41:02.188 AM hidd[47]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
6/28/13 11:41:03.000 AM kernel[0]: macx_swapon SUCCESS
6/28/13 11:41:03.000 AM kernel[0]: BCM5701Enet: Ethernet address 3c:07:54:33:3f:17
6/28/13 11:41:03.000 AM kernel[0]: AirPort_Brcm4331: Ethernet address b8:8d:12:27:2e:6c
6/28/13 11:41:03.000 AM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
6/28/13 11:41:03.000 AM kernel[0]: IO80211Interface::efiNVRAMPublished():
6/28/13 11:41:03.000 AM kernel[0]: Waiting for DSMOS...
6/28/13 11:41:04.844 AM mDNSResponder[40]: mDNSResponder mDNSResponder-379.38.1 (Apr 25 2013 19:19:56) starting OSXVers 12
6/28/13 11:41:04.875 AM hidd[47]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
6/28/13 11:41:04.883 AM appleeventsd[53]: main: Starting up
6/28/13 11:41:04.896 AM airportd[66]: _processDLILEvent: en1 attached (down)
6/28/13 11:41:04.915 AM com.apple.usbmuxd[27]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
6/28/13 11:41:04.000 AM kernel[0]: createVirtIf(): ifRole = 1
6/28/13 11:41:04.000 AM kernel[0]: in func createVirtualInterface ifRole = 1
6/28/13 11:41:04.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff80180f9400
6/28/13 11:41:04.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
6/28/13 11:41:04.955 AM coreservicesd[62]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
6/28/13 11:41:05.000 AM kernel[0]: Created virtif 0xffffff80180f9400 p2p0
6/28/13 11:41:05.000 AM kernel[0]: [IOBluetoothHCIController][start] -- completed
6/28/13 11:41:05.000 AM kernel[0]: IOBluetoothUSBDFU::probe
6/28/13 11:41:05.000 AM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
6/28/13 11:41:05.000 AM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
6/28/13 11:41:05.000 AM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
6/28/13 11:41:05.000 AM kernel[0]: Previous Shutdown Cause: 5
6/28/13 11:41:05.000 AM kernel[0]: LPAudioDevice[0xffffff80180e4100]::initHardware(0xffffff80165bab00)
6/28/13 11:41:05.000 AM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
6/28/13 11:41:05.000 AM kernel[0]: LPAudioDevice[0xffffff80180e4100]::createAudioEngine()
6/28/13 11:41:05.000 AM kernel[0]: LPAudioEngine[0xffffff80176e5600]::init()
6/28/13 11:41:05.000 AM kernel[0]: LPAudioEngine::init SUCCEED
6/28/13 11:41:05.000 AM kernel[0]: LPAudioEngine[0xffffff80176e5600]::initHardware(0xffffff80180e4100)
6/28/13 11:41:05.000 AM kernel[0]: LPAudioEngine[0xffffff80176e5600]::createNewAudioStream()
6/28/13 11:41:05.000 AM kernel[0]: LPAudioEngine[0xffffff80176e5600]::peformFormatChange(0xffffff801809f800, 0xffffff80f579baa0, 0)
6/28/13 11:41:05.000 AM kernel[0]: LPAudioEngine::createNewAudioStream SUCCEED
6/28/13 11:41:05.000 AM kernel[0]: LPAudioEngine[0xffffff80176e5600]::createNewAudioStream()
6/28/13 11:41:05.000 AM kernel[0]: LPAudioEngine[0xffffff80176e5600]::peformFormatChange(0xffffff801809f600, 0xffffff80f579baa0, 0)
6/28/13 11:41:05.000 AM kernel[0]: LPAudioEngine::createNewAudioStream SUCCEED
6/28/13 11:41:05.000 AM kernel[0]: LPAudioEngine::initHardware SUCCEED
6/28/13 11:41:05.000 AM kernel[0]: LPAudioDevice::createAudioEngine SUCCEED
6/28/13 11:41:05.000 AM kernel[0]: LPAudioDevice::initHardware SUCCEED
6/28/13 11:41:05.000 AM kernel[0]: DSMOS has arrived
6/28/13 11:41:05.000 AM kernel[0]: mTail has not been written to hardware: mTail = 0x00000000, hardare tail register = 0x00000060
6/28/13 11:41:05.472 AM WindowServer[76]: Server is starting up
6/28/13 11:41:05.740 AM WindowServer[76]: Session 256 retained (2 references)
6/28/13 11:41:05.740 AM WindowServer[76]: Session 256 released (1 references)
6/28/13 11:41:05.749 AM WindowServer[76]: Session 256 retained (2 references)
6/28/13 11:41:05.750 AM WindowServer[76]: init_page_flip: page flip mode is on
6/28/13 11:41:05.816 AM WindowServer[76]: mux_initialize: kAGCGetMuxState (kMuxControl, kMuxControl_switchingMode) failed (0xe0000001)
6/28/13 11:41:05.816 AM WindowServer[76]: mux_initialize: Mode is safe
6/28/13 11:41:05.830 AM WindowServer[76]: GLCompositor enabled for tile size [256 x 256]
6/28/13 11:41:05.830 AM WindowServer[76]: CGXGLInitMipMap: mip map mode is on
6/28/13 11:41:05.852 AM WindowServer[76]: WSMachineUsesNewStyleMirroring: false
6/28/13 11:41:05.852 AM WindowServer[76]: Display 0x042732c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 10 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ccb, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009ccb00000000042732c0
6/28/13 11:41:05.852 AM WindowServer[76]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
6/28/13 11:41:05.852 AM WindowServer[76]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
6/28/13 11:41:05.853 AM WindowServer[76]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
6/28/13 11:41:05.855 AM WindowServer[76]: Created shield window 0x5 for display 0x042732c0
6/28/13 11:41:05.855 AM WindowServer[76]: Created shield window 0x6 for display 0x003f003f
6/28/13 11:41:05.855 AM WindowServer[76]: Created shield window 0x7 for display 0x003f003e
6/28/13 11:41:05.855 AM WindowServer[76]: Created shield window 0x8 for display 0x003f003d
6/28/13 11:41:05.857 AM WindowServer[76]: Display 0x042732c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 10 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ccb, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009ccb00000000042732c0
6/28/13 11:41:05.857 AM WindowServer[76]: Display 0x003f003f: GL mask 0x8; bounds (2304, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
6/28/13 11:41:05.857 AM WindowServer[76]: Display 0x003f003e: GL mask 0x4; bounds (2305, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
6/28/13 11:41:05.857 AM WindowServer[76]: Display 0x003f003d: GL mask 0x2; bounds (2306, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
6/28/13 11:41:05.857 AM WindowServer[76]: CGXPerformInitialDisplayConfiguration
6/28/13 11:41:05.857 AM WindowServer[76]:   Display 0x042732c0: MappedDisplay Unit 0; Vendor 0x610 Model 0x9ccb S/N 0 Dimensions 11.26 x 7.05; online enabled built-in, Bounds (0,0)[1280 x 800], Rotation 0, Resolution 1
6/28/13 11:41:05.857 AM WindowServer[76]:   Display 0x003f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2304,0)[1 x 1], Rotation 0, Resolution 1
6/28/13 11:41:05.858 AM WindowServer[76]:   Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2305,0)[1 x 1], Rotation 0, Resolution 1
6/28/13 11:41:05.858 AM WindowServer[76]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2306,0)[1 x 1], Rotation 0, Resolution 1
6/28/13 11:41:05.858 AM WindowServer[76]: CGXMuxBoot: Unexpected boot switch return value (0xe00002c7)
6/28/13 11:41:05.943 AM WindowServer[76]: GLCompositor: GL renderer id 0x01024301, GL mask 0x0000000f, accelerator 0x000042cb, unit 0, caps QEX|QGL|MIPMAP, vram 579 MB
6/28/13 11:41:05.943 AM WindowServer[76]: GLCompositor: GL renderer id 0x01024301, GL mask 0x0000000f, texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
6/28/13 11:41:05.958 AM WindowServer[76]: Unable to open IOHIDSystem (e00002bd)
6/28/13 11:41:06.000 AM kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
6/28/13 11:41:06.189 AM mds[39]: (Normal) FMW: FMW 0 0
6/28/13 11:41:06.371 AM com.apple.SecurityServer[15]: Session 100000 created
6/28/13 11:41:07.000 AM kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
6/28/13 11:41:07.000 AM kernel[0]: en1::IO80211Interface::postMessage bssid changed
6/28/13 11:41:07.035 AM configd[18]: network changed.
6/28/13 11:41:07.036 AM configd[18]: setting hostname to "Rogers-MacBook-Pro.local"
6/28/13 11:41:07.856 AM WindowServer[76]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
6/28/13 11:41:11.558 AM com.apple.SecurityServer[15]: Entering service
6/28/13 11:41:11.665 AM mDNSResponder[40]: D2D_IPC: Loaded
6/28/13 11:41:11.665 AM mDNSResponder[40]: D2DInitialize succeeded
6/28/13 11:41:11.673 AM configd[18]: network changed: DNS*
6/28/13 11:41:11.806 AM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
6/28/13 11:41:11.877 AM locationd[44]: NOTICE,Location icon should now be in state 0
6/28/13 11:41:11.885 AM loginwindow[43]: Login Window Application Started
6/28/13 11:41:11.904 AM awacsd[57]: Starting awacsd connectivity-78.3 (Apr 25 2013 19:22:44)
6/28/13 11:41:11.925 AM awacsd[57]: InnerStore CopyAllZones: no info in Dynamic Store
6/28/13 11:41:11.948 AM loginwindow[43]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
6/28/13 11:41:11.983 AM systemkeychain[69]: done file: /var/run/systemkeychaincheck.done
6/28/13 11:41:12.053 AM netbiosd[83]: Unable to start NetBIOS name service:
6/28/13 11:41:12.092 AM digest-service[106]: label: default
6/28/13 11:41:12.092 AM digest-service[106]:     dbname: od:/Local/Default
6/28/13 11:41:12.092 AM digest-service[106]:     mkey_file: /var/db/krb5kdc/m-key
6/28/13 11:41:12.092 AM digest-service[106]:     acl_file: /var/db/krb5kdc/kadmind.acl
6/28/13 11:41:12.095 AM digest-service[106]: digest-request: uid=0
6/28/13 11:41:12.126 AM rpcsvchost[108]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
6/28/13 11:41:12.128 AM digest-service[106]: digest-request: init request
6/28/13 11:41:12.132 AM digest-service[106]: digest-request: init return domain: BUILTIN server: ROGERS-MACBOOK-PRO
6/28/13 11:41:12.140 AM aosnotifyd[104]: bootstrap_look_up failed (44e)
6/28/13 11:41:13.000 AM kernel[0]: en1: 802.11d country code set to 'US'.
6/28/13 11:41:13.000 AM kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
6/28/13 11:41:14.000 AM kernel[0]: MacAuthEvent en1   Auth result for: 74:44:01:00:88:6b MAC AUTH succeeded
6/28/13 11:41:14.000 AM kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
6/28/13 11:41:14.000 AM kernel[0]: AirPort: Link Up on en1
6/28/13 11:41:14.000 AM kernel[0]: en1: BSSID changed to 74:44:01:00:88:6b
6/28/13 11:41:14.000 AM kernel[0]: en1::IO80211Interface::postMessage bssid changed
6/28/13 11:41:14.000 AM kernel[0]: AirPort: RSN handshake complete on en1
6/28/13 11:41:19.334 AM WindowServer[76]: Created shield window 0x9 for display 0x042732c0
6/28/13 11:41:19.335 AM WindowServer[76]: Display 0x042732c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
6/28/13 11:41:19.363 AM configd[18]: network changed: v4(en1+:192.168.1.162) DNS+ Proxy+ SMB
6/28/13 11:41:19.377 AM WindowServer[76]: Display 0x042732c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
6/28/13 11:41:19.386 AM UserEventAgent[11]: Captive: en1: Not probing 'ATT5425' (protected network)
6/28/13 11:41:19.390 AM configd[18]: network changed: v4(en1!:192.168.1.162) DNS Proxy SMB
6/28/13 11:41:19.423 AM configd[18]: network changed: v4(en1:192.168.1.162) v6(en1+:fe80::7644:1ff:fe00:886b) DNS* Proxy SMB
6/28/13 11:41:20.813 AM ntpd[102]: proto: precision = 1.000 usec
6/28/13 11:41:20.895 AM airportd[66]: _doAutoJoin: Already associated to “ATT5425”. Bailing on auto-join.
6/28/13 11:41:20.908 AM airportd[66]: _doAutoJoin: Already associated to “ATT5425”. Bailing on auto-join.
6/28/13 11:41:21.047 AM WindowServer[76]: Display 0x042732c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
6/28/13 11:41:21.072 AM launchctl[115]: com.apple.findmymacmessenger: Already loaded
6/28/13 11:41:21.113 AM com.apple.SecurityServer[15]: Session 100004 created
6/28/13 11:41:21.213 AM airportd[66]: _doAutoJoin: Already associated to “ATT5425”. Bailing on auto-join.
6/28/13 11:41:21.217 AM hidd[47]: CGSShutdownServerConnections: Detaching application from window server
6/28/13 11:41:21.217 AM hidd[47]: CGSDisplayServerShutdown: Detaching display subsystem from window server
6/28/13 11:41:21.254 AM loginwindow[43]: Login Window Started Security Agent
6/28/13 11:41:21.319 AM UserEventAgent[116]: cannot find useragent 1102
6/28/13 11:41:21.432 AM SecurityAgent[124]: This is the first run
6/28/13 11:41:21.432 AM SecurityAgent[124]: MacBuddy was run = 0
6/28/13 11:41:21.464 AM SecurityAgent[124]: User info context values set for Roger
6/28/13 11:41:21.802 AM loginwindow[43]: Login Window - Returned from Security Agent
6/28/13 11:41:21.814 AM loginwindow[43]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
6/28/13 11:41:21.825 AM loginwindow[43]: USER_PROCESS: 43 console
6/28/13 11:41:21.948 AM com.apple.launchd.peruser.501[126]: (com.apple.gamed) Ignored this key: UserName
6/28/13 11:41:21.948 AM com.apple.launchd.peruser.501[126]: (com.apple.gamed) Ignored this key: GroupName
6/28/13 11:41:21.949 AM com.apple.launchd.peruser.501[126]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
6/28/13 11:41:21.954 AM loginwindow[43]: Connection with distnoted server was invalidated
6/28/13 11:41:21.990 AM distnoted[130]: # distnote server agent absolute time: 40.174224381   civil time: Fri Jun 28 11:41:21 2013   pid: 130 uid: 501 root: no
6/28/13 11:41:22.116 AM WindowServer[76]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
6/28/13 11:41:22.353 AM com.apple.launchd[1]: (com.apple.xprotectupdater[24]) Exited with code: 252
6/28/13 11:41:22.427 AM coreaudiod[142]: Enabled automatic stack shots because audio IO is inactive
6/28/13 11:41:22.656 AM talagent[139]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, _kLSApplicationIsHiddenKey, hidden ? kCFBooleanTrue : kCFBooleanFalse, NULL) produced OSStatus -50 on line 623 in TCApplication.m
6/28/13 11:41:22.659 AM talagent[139]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, TAL_kLSIsProxiedForTALKey, kCFBooleanTrue, NULL) produced OSStatus -50 on line 626 in TCApplication.m
6/28/13 11:41:22.747 AM com.apple.launchd.peruser.501[126]: (com.apple.afpstat-qfa[161]) Exited with code: 2
6/28/13 11:41:22.000 AM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=166[GoogleSoftwareUp] clearing CS_VALID
6/28/13 11:41:22.888 AM com.apple.launchd.peruser.501[126]: ([email protected][167]) Exited with code: 2
6/28/13 11:41:23.209 AM NetworkBrowserAgent[175]: Starting NetworkBrowserAgent
6/28/13 11:41:23.832 AM com.apple.launchd.peruser.501[126]: (com.apple.mrt.uiagent[151]) Exited with code: 255
6/28/13 11:41:24.018 AM WindowServer[76]: Created shield window 0x27 for display 0x042732c0
6/28/13 11:41:24.019 AM WindowServer[76]: Display 0x042732c0: MappedDisplay Unit 0; ColorProfile { 3, "Color LCD Calibrated"}; TransferTable (256, 3)
6/28/13 11:41:24.173 AM blued[56]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
6/28/13 11:41:24.464 AM SystemUIServer[140]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
6/28/13 11:41:24.464 AM SystemUIServer[140]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
6/28/13 11:41:25.732 AM com.apple.SecurityServer[15]: Session 100006 created
6/28/13 11:41:27.578 AM timezoned[191]: bootstrap_look_up failed (44e)
6/28/13 11:41:28.112 AM awacsd[57]: Exiting
6/28/13 11:41:29.087 AM apsd[59]: Unable to bootstrap_lookup connection port for 'com.apple.ubd.system-push': Unknown service name
6/28/13 11:41:30.027 AM locationd[44]: NOTICE,Location icon should now be in state 2
6/28/13 11:41:35.069 AM locationd[44]: NOTICE,Location icon should now be in state 0
6/28/13 11:41:41.925 AM com.apple.launchd[1]: (com.apple.coreservices.appleid.authentication[120]) Exit timeout elapsed (20 seconds). Killing
6/28/13 11:41:46.647 AM com.apple.time[129]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
6/28/13 11:41:57.830 AM WindowServer[76]: CGXDisableUpdate: UI updates were forcibly disabled by application "Console" for over 1.00 seconds. Server has re-enabled them.
6/28/13 11:41:58.371 AM WindowServer[76]: reenable_update_for_connection: UI updates were finally reenabled by application "Console" after 1.54 seconds (server forcibly re-enabled them after 1.00 seconds)
6/28/13 11:42:36.690 AM com.apple.SecurityServer[15]: Session 100005 created

At a glance what is new in Safari 5

This should give a little in sight:
http://lifehacker.com/5557731/first-look-at-whats-new-in-safari-5

I missed the 'Blue Bar', I'm glad it has returned

What happens on iCloud (ex. contacts) when multiple family members use the same Apple ID?

What happens on iCloud when multiple family members use the same Apple ID? For example if we all choose to use iCloud for contacts, are they all merged together? We use the same Apple ID so we can use find my iPhone to keep track of the whole family.

Of course if you are both connected to the same iCloud account you have the same contacts - what did you expect?. The contacts live on the server and are read from there by the devices; so as you've both managed to sync your contacts up to iCloud they are now inextricably mixed. You can only delete your contacts by deleting individual ones, and doing that will delete them from your phone as well.
You can only unravel this by
1. In the iCloud contacts page at http://icloud.com, select all the contacts, click on the cogwheel icon at bottom left and choose 'Export vCard'.
2. Sign out of System Preferences>iCloud
3. Create a new Apple ID and open a new iCloud account with it for your own use.
4. Import the vCard back into the iCloud contacts page.
5. Go to http://icloud.com and sign in with the original ID. This is now his ID. Work through the contacts individually deleting the ones you don't want him to have. When done sign out and advise him to change his password.
6. Go to the new iCloud account and delete his contacts individually.
Of course if you have also been syncing calendars and using the same email address there are problems with doing this.

Macbook4,1 10.6.8 and firmware update - what went wrong?

Macbook 4,1 2008 2.4Ghz (not unibody). I recently reformatted my hard drive and reinstalled 10.6 from the Retail DVD and all seemed to go well. The MB was working fine up to that point. I then set up the MB (network, date and time, etc.) and repaired permissions.
I then checked Software Update and downloaded and installed the recommended updates to 10.6.8.
Again, all seemed to go fine. System booted and I repaired Permissions again. I went to the Apple web site, a couple of other web sites, and Software Update found another update to install: Firmware. Though I don't remember what version.
I clicked OK and it installed.
Upon reboot, it seemed to install okay.
But then I left the Macbook and it went into Sleep.
I didn't come back to it again until the next day.
When I pressed a key to wake it, I got what I now know is the screen that appears after you wake it from SAFE SLEEP. As per this Apple KB article: http://support.apple.com/kb/HT1757.
And this is where the problems started.
After the MB woke to the Safe Sleep screen, which shows the desktop a little "out of focus", the progress bars started filling in from left to right, BUT before they completed, the screen went BLACK.
And it has had a problem with black screen ever since. I can boot the MB from internal or external HD or from DVD, and it seems to boot fine. Boot chime, Apple logo, spinning wheel, then at the point where it pauses, blue screen, then goes to desktop, instead the screen goes black.
It finishes booting, but seems to go into Sleep.
I can wake it by pressing a key, but the screen either comes on and goes black again after 10 seconds, or I get the Safe Sleep wake screen, and then it goes black after 10 seconds.
And at boot or when waking the MB, the front LED flashes 5 times. There are no error beeps.
I've tried changing RAM, but problems remain.
So what's all this? Any ideas?
The display doesn't seem dead, as it works to boot and wake. The MB works fine with external monitor.
It's weird, but I can't think of anything apart from the Firmware update. The problems started right after installing it.
Unfortunately, this model of Macbook doesn't have a Firmware Restoration image to download and burn to CD. It is the ONLY Mac at this point that doesn't have this!
I called Apple support and even bought the 49 Euro Pay Per Incident service, which proved to be the same as throwing 49 Euro out the window. The only "technical" support they provided was to Reset the SMC, which you can find out about FOR FREE at the Apple website. And which I'd done anyway. I'd also reinstalled the MacOS. Don't want to beef too much, but sheesh, you've already got a Macbook that might need costly repairs, and they make you pay 49 Euro BEFORE they even ask you about the problem and what you've done to try to solve it. I'm tempted to say "ripoff". I mean, if all they can offer you is the advice to reset the SMC - which Apple offers for free at their website - then that's pretty poor service for 49 Euro, to say the least.
Apart from the wasted 49 Euro, I'm pretty peeved about the Firmware update (or so it seems) wrecking a perfectly working 2008 Macbook. I don't know how to convince Apple of this, but I'm certainly going to try.

Thanks for the reply.
Re. the Displays setting, the Macbook display isn't recognized and mirroring isn't an available option.
I've scoured the net and the idea of replacing the PRAM battery may be something to try. I read a post by a guy with a Macbook logic board screwed up by a Firmware update, which he solved by replacing the PRAM battery, as when you disconnect it you reset the logic board.
Which capacitor?
No luck so far with talking to Apple. I will try to get hold of someone a little more tech savvy and/or in a position of authority, as it seems that the Firmware is the culprit. Obviously a million other things could go wrong with a Macbook, but given the timing here it looks like the Firmware. Firmware updates can and occasionally do screw up a computer, as most manufacturers will warn you before you apply the update: PC makers, printer makers, etc. And they probably warn you that it's all your responsibility if anything goes wrong. But re. the Apple Firmware update:
1) it came thru Software Update
2) there was no warning
3) to make things worse, there's no Firmware Restoration image that I can burn to a CD to reflash the logic board: this is the only Apple computer that doesn't have a Firmware Restoration option
I'll try to get thru to a manager and convince him/her that the firmware may have been the cause.
Do you think an authorized Apple tech might have access to some way to do a firmware restoration? Something not avaiable to mere mortals? Because if not, the only solution looks like a new logic board.

Format C drive, what steps to take for retaining all data of iTunes?

Hello
I want to format my C drive of Laptop and shift my itunes to E drive. I'm on windows 7. C drive is having itunes and in that I have synced my 2 iphones and 1 ipad.
Now I want to format the C drive and want to retain all the data, backup, media etc of my synced data with the itunes.
What I've done is that I transferred my music location from C to E drive by using apple forum discussion. I changed destination to E drive in ADVANCED TAB in Edit-Preferences. Then orgainzed data. That was successful.
Now please help me on what to do next so that i can retain my all my data of itunes safe before formatting my C drive.
Thanks in advance

This definitely isn't intended as a substitute for tt2's tutorial (which is comprehensive and more detailed - in case of any differences I'd follow what's stated there), but in summary you should be doing the following. I've assumed that, as per your original post, you've changed your media location to E:\iTunes and consolidated the library. You now have a "split library" where:
E:\iTunes contains a folder called iTunes Media which in turn contains several subfolders such as Automatically Added to iTunes, Audiobooks, Music, ...
C:\Users\your user name\Music\iTunes contains the following folders and files:
Album Artwork (folder)
Previous iTunes Library (folder)
iTunes Library Extras.itdb (file)
iTunes Library Genius.itdb (file)
iTunes Library.itl (file)
iTunes Library.xml (file)
I'd suggest making sure that you're running the latest version of iTunes before proceeding - by default, this will be the version that you download and install when you rebuild your PC.
Before you change anything else, exit iTunes. Now copy all of the folders and files in C:\Users\your user name\Music\iTunes to the same folder on your external drive (E:) that contains your media folder. You should now have this:
or something very similar. Now restart iTunes while holding down the SHIFT key. You will see this dialog:
Select "Choose Library ..." and navigate to the folder on your external drive with the content as described above. Select the iTunes Library.itl file and click OK. iTunes will load - check that everything you expect to see is there.
You now have a "portable library", i.e., all your media and the files that iTunes uses to organize them. You can use this in conjunction with any PC running Windows and iTunes (noting limitations regarding your iTunes account and authorizations). As tt2 suggested in his response, before you go any further:
Make a backup of your new portable library to another device.
De-authorize your iTunes account.
Back up everything else you need to retain from the C: drive of your PC (this is beyond the scope of this forum - there's plenty of help out there on various Microsoft sites, etc.). Just remember that once you take the plunge and reformat the C: drive anything that you haven't backed up is gone ...
Once you've reformatted the drive and reinstalled Windows, install iTunes. As befpre, hold down the SHIFT key when you start it up and select the iTunes Library.itl file on your external drive. You can then re-authorize iTunes and be back in business ...

What are the mandatory fields while creation of material master in differen

what are the mandatory fields while creation of material master in different views?

Hi Gopi,
This is purely depends on the function configuration, which would be done MM consultants. Kindly check with them.
thanks & regards
Kishore Kumar Maram

Adobe Bridge in Photoshop - How to install Bridge and camera raw? And what is it all about?

Hi everyone! I am actually in love with this adobe photoshop. I used PSCS2 before, but later on upgraded to CS4. But I feel tired in upgrading to CS5.
One time, I found a tutorial in youtube about camera raw, and would really want to use it. But I was wondering how to install the camera raw. I believe camera raw is a plugin? so I downloaded the plugin here, installed it in my PS. I downloaded a file Camera Raw.8bi and paste it on my C drive - C:\Program Files\Adobe\Photoshop CS4\Plug-ins\File Formats.
I now am very confused, how will I open it? I do not have adobe bridge! After I installed the camera raw, I opened my PS. I clicked the file>then browse in bridge. I had an error, it's "error 2 photoshop11 undefined". Which is what I thought, I might have done something wrong with installing it.
My question is, do you still need adobe bridge installed in order to use camera raw?
If yes, how does it work? How am I suppose to open camera raw?
If no, how am I going to open camera raw without bridge?
And also, where will I download adobe bridge? I cannot find one here for CS4, only adobe bridge for CS5. I am wondering, is it okay to install adobe bridge CS5 and use it with my PS CS4?
I badly need help!

WebDAV (Web-based Distributed Authoring and Versioning) is a set of extensions to HTTP/1.1.
The main difference from FTP as far as I can see is that it allows you to edit documents on a remote web server.
WebDAV was used by the Apple server - MobileMe but is not generally supported by hosting services.
Using WebDAV you can mount a directory locally. This was how iDisk worked on your Mac and you could drag files onto it to upload them to the remote directory.
With WebDAV, a number of users can share a directory which is why its used in local networks but presents security problems when using a remote server.
If you are into file sharing rather than publishing, Dropbox or its new rival SugarSync are more appropriate.

Black window bugs and lockups and crashes and WHAT'S WRONG?

First, I thought the problem was that my employer still uses Windows XP, with layers of custom security on top. But it happens at home, on my vanilla XP netbook.
So then I thought the problem was XP, which is, after all, obsolete. But now it is happening on my brand-new week-old laptop running 64 bit Windows 7 professional.
These are the problems:
(1) When recovering from sleep mode, or when I plug in a second screen, or even just from having the screen closed briefly, Firefox fails to redraw its window contents. I just get a black, empty window until I resize it or force a refresh. NO OTHER PROGRAM I USE HAS THIS PROBLEM.
(2) Sometime Firefox fails to redraw no matter what I do. I just had a totally black window, and when I clicked on the close box, a msgbox popped up, totally black inside, with a title like, "Are you sure you want to close?" I couldn't even see the "yes" and "No" buttons, and clicking where they usually are didn't work. I finally got it to close by hitting the enter key.
(3) Sometimes these problems are accompanied by a little vestigial micro-window, which has no contents, no close button, and no resize control. It's this nothing window with no title, but the title bar is long enough for maybe 20 characters. The most recent time this happened to me, the nothing window had a blinking text cursor inside, but typing had no effect. The only way to get rid of the micro-window is to close every single instance of Firefox, and then wait about 20 seconds. Then it disappears on its own. Sometimes it appears on its own without the black screen problem.
(4) All my favicons disappeared when I updated Firefox on my XP work computer, and they refuse to come back, even when I revisit the websites.
The computers involved are:
Dell E4200 running Win XP Pro
Acer One netbook running Win XP Home
Vostro 3350 running Win 7 Pro
All 3 computers are running Norton Security Suite (The E4200 is running an Enterprise custom load, the other two are running Comcast's free version)
And all 3 computers have been connected to a Displaylink USB video adapter (for a 3rd screen) at some point or another, meaning that the driver is loaded on all the computers, but the above problems occur without any external monitor at all connected.
Everything else is pretty vanilla.
I'm getting these issues every other day or so, and it is really starting to annoy me and make me worried that Firefox is unstable, with makes me worried that any unsaved work or even my hard drive data might be at risk.

Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

Cannot send email from my iPhone or iPad. The server rejects a recepient for no apparent reason. The recipient is not new. This issue happens on reply or reply to all or froward; not a new email. What is happening?

Cannot send email from my iPhone or iPad. The server rejects a recepient for no apparent reason. The recipient is not new. This issue happens on reply or reply to all or froward; not a new email to the same recepient. What is happening?

I talked with a tech today and he said I cloud is having problems which should be resolved shortly.
In the mean time I used the .me smtp server settings which allowed me to send mail.

When would I use an if, for or while statement in Small Basic and what is the difference between the three?

I have a Y9 Computer Science Exam next week and I know that this will probably be one of the questions on it so I need to know the answer. What is the difference?

An If statement executes once IF the statement is true:
If 1 = 2/2 Then
Textwindow.writeline("True")
EndIf
A While statement executes WHILE the statement is true:
While 4 = 2+2
'Will keep looping while it is true
EndWhile
A For statement loops a number in increment:
For i = 1 to 10
'Every time through, i gets bigger by one until it equals 10
EndFor
It is written: "'As surely as I live,' says the Lord, 'every knee will bow before me; every tongue will acknowledge God.'" Romans 14:11

What is" LINE-COL2 = SY-INDEX ** 2."

can u explain what is '' ** "
FIELD-SYMBOLS <FS> LIKE LINE OF ITAB.
DO 4 TIMES.
LINE-COL1 = SY-INDEX.
LINE-COL2 = SY-INDEX ** 2. "what this will do
APPEND LINE TO ITAB.
ENDDO.

Hi sunil,
1 ** means "To the power of"
2. eg. 5 ** 2 = 25
(5 To the power of 2 = 25)
regards,
amit m.

What is the diffrence betweensy-tabix and sy-index

hi
can any one suggest me
what is the diffrence betweensy-tabix and sy-index
Thanks & Regards
kalyan.

Hi Kalyan,
This question has been answered many times on SCN. Please make a search before posting a thread.
Read the Rules of Engagement.
Happy Posting.
Regards,
Chandra Sekhar

What is difference between sy-tabix and sy-index.

SAP Seniors,
Can you please let me know what is difference between sy-index and sy-tabix.
I read the SAP help, it is confusing for me. it looks like both are same from help. please help me.
Thank you
Anitha.

HI,
Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
SY-TABIX
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY-INDEX
In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
Hope this helps.
Thank you,
Pavan.

What is CGXDisableUpdate?

Similar Messages

Maybe you are looking for